EleksMaker® A3 Pro including 2500mW Laser CNC Engraving Machine

R5,499.90  Inc VAT

General Specification
 Brand EleksMaker®
 Model  EleksLaser-A3 pro 2.5W
 Material Aluminum Profile and Acrylic
 Packaging Size 58x40x14cm / 22.83x15.75x5.51inch (L*W*H)
 Assembled Product Size 60x46x18cm / 23.62x18.11x7.09inch (L*W*H)
 Package Weight 4.60kg
 Can Engrave Wood, Plastic, Paper, Bamboo, Ox Horn, Leather, Sponge Paper, etc.
 Can not engrave Metal, Stone, Ceramics, Glass, Reflective or Transparent Material
 Technical Parameters
 Laser Power 2.5W / 2500mW (laser included)
 Laser Wavelength 445nm
 Control Board EleksMana SE
 Communication Port MircoUSB
 Laser Quick Replace Supported
 Stepper Motor 42H34S-1304A
 Power Input AC100-240V
 Working Voltage DC 12V
 Working Current DC 4-5A
 System Support Win XP/7/8/10
 Engrave Mode Photo, Word, Scan, outline, Pixel Laser Engraving
 Supported Formats jpg, bmp, svg, G-code
 Control Software System EleksCam, T2-Laser, GrblController, LiteFire, Laser GRBL, etc.(Can NOT use Benbox)
 Engraving Accuracy 0.01mm
 Engraving Area 30x40cm / 11.81 x 15.75inch (maximum)
 Engraved Object Height limitatiion                 No Limitation
 Function Ideal for amateur laser engraving, equipped with low light positioning and freedom positioning functions.
 Features 30X38cm ultra large engraving area,gantry shape design, no engraving height limitation.
 Three stepper motor drive providing faster moving speed.
 2500mW violet laser module with heatsink, high laser engraving power and long term use.
 can print any pictures easily

Laser machine installation, software downloading, software setting ,operating instructions and FAQ: http://wiki.eleksmaker.com/doku.php?id=elekslaser_a3_pro

Laser module self-checking tips link: https://www.dropbox.com/s/nuuu98e3einfee4/Laser%20Tips.pdf?dl=0

Please Note:
1. Please wear laser goggles during usage and avoid touching the laser directly with your eyes or skin!
2. The red cord is DC12v(+),black cord is GND(-), yellow cord is signal(S). Please make sure you know the wire position and connect to the ManaSE board correctly!
3. Do not use the laser module for more than 30 minutes at a time

Packaging List:
1 x DIY 2500mW Laser Engraving Machine(assembly needed)

1. How to assemble the kit?
    The whole assembly and operating manual link is here:http://wiki.eleksmaker.com/doku.php?id=elekslaser_a3_pro
    You can also watch the video to do it:https://www.youtube.com/embed/_1ypts5489Y

2. What software can support this machine? And what image format? Engrave Mode?
    Supported Software: EleksCam,T2-Laser,  GrblController, LiteFire, Laser GRBL, etc.
    EleksCam can be found at http://wiki.eleksmaker.com/doku.php?id=elekscam
    Supported Image Format: jpg, bmp, svg, G-code
    Supported Engrave Mode: Photo, Word, Scan, Outline, Pixel Laser Engraving

3. What systems can the EleksCAM support?
    PC Windows XP/7/8/10

4. My laser doesn't work, what should I do?
    If the machine does not work, it might be due to:
① The wire connection is wrong.Please check the connection like the picture shown.
② Your computer could not support the software.Please use Win XP 7/8/10 to check it.
③ Software problem.Please check whether wires are inserted rightly. And then check your data settings.
④ The kit misses some accessories.Please compare with the instructions

⑤ Laser module/ driver board/power supply is faulty.
⑥ Laser module self-checking tips link at http://www.dropbox.com/s/nuuu98e3einfee4/Laser%20Tips.pdf?dl=0

5: My software shows: Not data, what should I do?
    There might be two reasons.
     ① You did not open  Administrator privileges to run the software.
     ② Your computer architecture is incomplete:check whether VC ++ and .Net and directX are installed

6. Can I regulate the laser power or is the laser power is adjustable?
     Our new Mana SE controller board can adjust the power. Please download our ElekesCAM software to do it.

7. Can I upgrade stronger power laser module by myself? Can I extent rail frame?
   Yes,you can. A DC12V laser module can be installed on this machine. The red is positive.You can also extent the frame by yourself, but we do not stock the rails.
8. When I click arrows to control the motors, it works. But when I begin to make it work with EleksCAM software,
    it does not move. What should I do?

    The EleksCAM could move by hand but could not move when focus.The problem is the area and language inside the system control panel.
    Please set the format to English and United States.Then it will be ok. Detail is shown in the wiki link above.

9. My laser module is always on and could not turn off.What should I do?
    Please try to connect the Signal(S) and GND(-).
    If the laser module turn off, that means the laser module is ok, the problem might be the ManaSE board or a software setting.

  • Availability: Out Of Stock
  • Model: WH laser engraver kit
  • Manufacturer: Eleksmaker