3D Printing and Engraving

3D Printing/engraving related items
Sort By:  
12V Silver/Red V6 1.75mm J-Head Hotend Remote Extruder Kit with Heating Tube for CR10/CR8 3D Printer (12V red hotend)
Description:

Replace your 12V Creality CR* printer hotend with ease. 


Specifications:


- Color: Silver/Red
- Nozzle size:1.75mm
- Nozzle material: Brass
- Heating Block size: 19mm x 19mm x 10mm
- Heating Block/Heatsink Material: Aluminum Alloy
- Working Temperature: 260°C
- Heating Tube: 12v 40W
- Suitable: CR8/CR10 3D printer
- White wire is temperature thermistor, red wire is heating tube.
 
Package includes:
 
1 x Aluminum block(red and silver)
1 x Heating tube




R219.90  Inc VAT
V6 J-Head Metal Hot End Fixed Bracket For RepRap 3D Printer Extruder (extruder bracket)
Description:

Use box-type bearing module, the maximum extent to ensure the stability of operation of the print head, while ensuring stability in the premise, as far as possible to simplify the design and reduce the weight of the printhead mounting base on the maximum.
Aluminum alloy, surface sandblasting treatment, more texture.
Suitable for Reprap Prusa i3 3D printers use, shaft pitch can be adjusted to ensure suitability mounting base and prints.
After sandblasting surface treatment products more attractive, scratch-resistant.

Specifications:

Type: E3D V6
Material: Metal
Bracket Width: 35.6mm
Holder Height: 50mm
Holder Depth: 33.6mm
Fit for: 3D Printer Extruder


Package Includes:

1x E3D V6 Bracket
R129.90  Inc VAT
3D Printer Stepstick Drv8825 Stepper Motor Driver replace A4988 (purple print driver)
Product Features

1 simple steps and direction control interface
2 six different steps resolutions: full step, half step, 1/4-step1/8-step1/16-step, 1/32-step
3.CAN interface directly with 3.3 V and 5 V systems
4 Over-temperature thermal shutdown, overcurrent shutdown, undervoltage lockout
5 short to ground short circuit load protection
6.4 Layer 2 oz copper PCB, in order to improve heat dissipation
7 exposed solder ground below the bottom of the driver IC on the printed circuit board pad
8 module size, pin and interface matching A4988 stepper motor driver operators in many ways
9 adjustable current control lets you set a potentiometer, which lets you use the stepper motor's rated voltage or more, in order to achieve a higher rate of maximum output current step
10 Intelligent chopping control automatically selects the correct current decay mode (fast decay or slow decay)
11 Maximum 45 V supply voltage
12 built-in voltage regulator (the need for any external logic supply voltage)


How to control a stepper motor with Arduino
R95.90  Inc VAT
1.75mm 0.4mm V6 Hardened Steel Nozzle For J-Head Hotend Extruder 3D Printer (steel 3d nozzle)
Description:

A2 Hardened Steel Nozzle that is wear resistant, abrasion resistant and corrosion Resistant. It is compatible with most of the 3d printers using M6 tread hotends. E3D V6 style nozzle, it is made from A2 Hardened Steel and heat treated to 57-62 RC material. The nozzle has M6 thread and for 1.75mm 3d printers. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.

Features:

- Using steel material, in overall hardening treatment
- The hardness reaches 50-60 degrees, so durable to use.


Specifications:

Type: E3D
Material: Hardened Steel 
Nozzle Thread: M6
Size: 0.4mm
Fit for: 1.75mm filament

Package Includes:

1 x Nozzle
R34.90  Inc VAT
R69.90
Silver 1/8 Teeth Thread Nozzle Quick Direct Pneumatic Connector For 3D Printer (Pneumatic connector 4)
Description:

For 3D printer. The upper part can be inserted into 4mm pipe and self locking.

Specifications:

Color: Silver
Screw thread: 1/8 teeth
Application: For 3D printer
The upper part can be used to insert a 4mm pipe and self lock


Package Includes:

1 x Pneumatic connector
R39.90  Inc VAT
Creality 3D® Ultrabase 235*235*3mm Glass Plate Platform Heated Bed Build Surface for Ender-3 MK2 MK3 Hot bed (tempered glass bed)
Notes: Due to the different product batch, the position of Logo in the galss plate may change, thank you for your understanding.

Features:
 
- Excellent adhesion: Ultrabase covered by microporous coating, shows strong adhesion in printing.                            
- Easy to take off models by hand or with a little help from the scrapper for very large model           
- Ultrabase integrated with heated bed: Super Flatness, Fast and uniform heating           
- Durable: The special coating is inorganic and has a hardness of 8 Mohs, and it is capable to work at 400ºC.
- Easy to clean: Ultrabase is easy to clean by alcohol/water.

Specifications:

Size:
 235 x 235 x 3mm
Material: Tempered glass
Application: For ender-3/pro 3D printer

 
Temperature Settings For Different Filaments:
1.PLA: 50-65ºC
2. ABS: 80-120ºC
3. PC: 100-125ºC
4. Nelon: 100-130ºC
5. PP: 100-130ºC
6. PETG: 70-90ºC
7. TPU: 40-60ºC

Package Includes:


1x Creality 3D® Glass Platform
R659.90  Inc VAT
3D Printer Nozzle Cleaning Tool Drill Bit 0.4mm Size For Extruder (0.4mm nozzle clean tool)
Description:

Small needles that are ideal for clearing out the tiny diameters of 3D Printer nozzles. Simply heat your hot end up to the printing temperature of the material that's involved in the clog. Using a pair of pliers, carefully insert the needle or guitar string into the nozzle opening and move it back and forth, essentially breaking through and removing the clogged material

Specifications:

Applicable models: 3D printer nozzle 0.4mm
Material: Stainless steel


Package includes:

1 x Nozzle-clearing drill
R24.90  Inc VAT
Ceramic Cartridge Heater 24V 40W 620 with 1M Wire for 3D Printer DIY Kit (24V heat cartridge)
Description:

Replace your 3D printer hotend Heater cartridge.

Features:

Cartridge heater widely used for 3D printers.
Voltage 24V and power 40W, can provide uniform distribution of heat.
Consisting of a cylindrical stainless steel tube for corrosion prevention.
High quality wire core with fine and quick heat conductivity.
The cable is approx. 1 meter. The stainless steel part is 6mm in diameter and 20mm in length.

Specifications:
Voltage: 24V
Power: 40W
Diameter: 6mm, Length: 20mm (stainless steel part)
Wire Length: Approx. 1m

Note:
The item only includes the cartridge heater.
Heating pipe should be stored in a dry place, not damp.

Packing List:
1 x Cartridge Heater
R139.90  Inc VAT
Hotend Heating Block Silicone Cover Case For Creality CR-10/10S/10S4/10S5/Ender 3/CR20 3D Printer Part (black silicone hotend cover)
Description:

Will extend the life of your hotend by protecting it from burnt filament build up. It also aids in temperature control by keeping the highest temperatures where they belong.

Features:
- Non-stick silicone material made
- Keep the hotend temperature extremely stable.
- Extend the life of the heater block and extruder by keeping it cleaner.
- High-temperature resistance: 280℃.

Package Includes:  

1 x Heater Block Silicone Cover

R43.90  Inc VAT
24V 40W MK8 Extruder Hot End Kit 1.75mm 0.4mm Nozzle For Creality 3D Printer (24V red hotend)
Description:

A complete hotend for the Ender-3 printer, an original part manufactured by Creality.

Creality Ender-3 hotend specifications:

  1. The aluminium heating block measures 20 x 20 x 10 mm
  2. Heat sink with dimensions: 20 x 27 x 7 mm
  3. The head has a lead-out:
    • Thermistor
    • Heater tube
    • Teflon tube for filament supply
  4. Hotend suitable for printing with 1.75mm diameter filament
  5. Nozzle:0.4 mm
  6. Applicable models: Ender-3, Ender-3s, Ender-3 Pro, Ender-3 V2


What's in the box

1 x hotend kit
R309.90  Inc VAT
Full Graphic 12864 Smart Controller RAMPS 1.4 LCD 12864 LCD Control Panel Blue Screen for 3D Printer (12864 3d printer display)
Description:

LCD control panel for 3D printers. LCD control panel through which you can achieve spooling as the 3D model Gcode files are copied to the SD card and then print the file via the LCD control panel. This version is an upgraded version of the reprap smart controller.



Features:

Using a large screen 12864LCD
With a SD card base on back, put your sliced file onto the SD card and select the file on the LCD. It can then can be printed
Product comes encoder to select the desired file
Plug and play on the RAMPS, but may need to modify the firmware to support


Specifications:

Screen size:    128x64
Cable Length (cm):    30
Input Supply Voltage: (VDC)    5
Length (mm):    93
Width (mm):    87





Package Includes:

1x LCD 12864 Smart Controller 
1x Smart Adapter 
2x 30cm FC Cable

R338.90  Inc VAT
TMC2209 V3.1 Stepping Motor Driver Step sticks Silent Driver 256 Microsteps Current 2.8A Peak (TMC2209 white step driver)
Features

Hardware compatible with StepStick and Pololu A4988
Drive capability up to 1.7A (RMS) continuous coil current - 2.8A Peak
Step/Dir interface with microstep interpolation (up to 256 microsteps)
Configuration via CFG pins or UART interface
Motor voltage: 5.5...28V
Logic voltage: 3.3...5V
RSense: 0.11 Ohm
stealthChop2 - for quiet operation and smooth motion
spreadCycle - highly dynamic motor control chopper (enableable via UART, OTP, CFG Pin)
coolStep - current control for energy savings
stallGuard4 - sensorless motor load detection

Package Includes:

1 x TMC2209 V3.1
1 x Heatsink
R139.90  Inc VAT
2x4 PTFE Tube Cutter Kit for 3D Printer (PTFE cutter kit)
Description

In order to  properly seat your Bowden tube, it is key to have a clean, square end. Without this, you risk oozing, or worse, clogging in the hot end. This super-sharp tubing cutter is the perfect tool for obtaining a clean, square cut in your tubing, every time.

Features a stainless steel blade and switch button. The housing is made from tough durable plastic. Can also be used to cut filament. But do not use as a wire cutter or you will dull the blade.

What's in the box?

3 x PC4-01 pneumatic plugs
3 x KJH 04-M6 pneumatic plugs
1m  ID2mm OD4mm blue PTFE tube
1 x flat screwdriver
1 x cutter with a replacement blade
2 x 10 * 25mm yellow springs
R329.90  Inc VAT
PTFE Tube Cutter For 3D Printer (PTFE cutter)
Description:

In order to  properly seat your Bowden tube, it is key to have a clean, square end. Without this, you risk oozing, or worse, clogging in the hot end. This super-sharp tubing cutter is the perfect tool for obtaining a clean, square cut in your tubing, every time.

Features a stainless steel blade and switch button. The housing is made from tough durable plastic. Can also be used to cut filament. But do not use as a wire cutter or you will dull the blade.

Package includes:

1 x Tube Cutter
R69.90  Inc VAT
Nema 17 SM24240 Two-Phase Stepper Motor (WS Nema 17 motor)
Specifications
  • Category: two-phase stepper motor
  • Step angle: 1.8°
  • Body length: 40mm
  • Rated current: 1.7A/Phase
  • Phase resistance: 2.4Ω
  • Phase inductance: 3.7mH
  • Holding torque: 0.45N.m
  • Rotor inertia: 54(g.c㎡)
  • Weight: 0.3kg
  • Compatible driver: SMD258C, Stepper Motor HAT
Dimensions

Wiring Configuration



Part NumberPhasesStep angle
(degree)
Body length
(mm)
Rated current
(A/Phase)
Phase resistance
(Ω)
Phase inductance
(mH)
Holding torque
(N.m)
Rotor inertia
(g.c㎡)
Weight
(kg)
Compatible driver
SM24240two-phase1.8401.72.403.70.45540.3SMD258C, Stepper Motor HAT
SM25776two-phase1.8763.01.001.61.904801.0SMD258C
SM35778three-phase1.2785.80.290.391.503801.1SMD356C
R169.90  Inc VAT
Creality 3D Printer CR-X Fully Assembled Extruder Hotend kit (CR-X hotend complete)
 Description:

The dual-color FDM 3D printer with dual extruders into one nozzle structure is much easier to use and maintain than a traditional dual-nozzle 3D printer.

Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved. Its much smoother to feed filament through. And when printing it reduces the drag on the extruder giving a much smoother travel and print quality.

 Specifications:

  •     Material: Aluminum & Stainless Steel & Brass
  •     Installation type: external thread connection
  •     Scope of application: 3D printer CREALITY CR-X
  •     Nozzle size: 0.4mm
R1,799.90  Inc VAT
Creality 3D CR-X 0.4 MM Hotend Extruder Nozzle (CR-X print nozzle)
Description:

These 0.4mm MK8 Nozzles are Creality Original replacement parts designed to fit the Creality CR-X, and are based on the successful MK8 design. They are the standard nozzle size of 0.4mm, which is the same size that comes equipped on many of the modern models since 3mm filament began phasing out. This size offers impressive accuracy without compromising too much on the rate at which 3D Printers lay down the Plastic Filaments – A good balance of speed and quality that is relatively easy to work with compared to larger or smaller nozzles.

While some people enjoy printing with smaller nozzles to ascertain even better quality and printing accuracy, and others choose to use large nozzles for speed-printing models or objects that don’t need to be perfectly accurate, these nozzles offer the best of both worlds. This is why they come as the stock nozzles on so many different models of printers. However, if you are a veteran in 3D Printing, you will understand that each different size nozzle can offer their own benefits
Package includes:

1 x 0.4mm nozzle for CR-X
R149.90  Inc VAT
Gdstime 3D Printer Radial Fan Blower 24V 40x40x10mm (24V radial blower fan 40x40x10)
Product Description:

A product that is widely used in 3D Printer, Humidifier, Cool Xbox, PC CPU Server, etc. It has intelligent industrial control equipment plate cooling heat. With high Precision Medical equipment cooling. Often used for PC RAM Card Cooling Dissipation.
The Fan is also suitable for daily general use for electronics that need cooling.


Specifications:

  •     Bearing Type: Hydraulic Bearing
  •     Rated Voltage: DC 24V
  •     Connector Type: XH2.54-2PIN
  •     Cable Length: 15cm
  •     Current: 0.08A



Package Includes:

1 x 40mm Blower Fan
R99.90  Inc VAT
SA Filament PLA White (1.75mm) 1Kg (Sa Filament White PLA)
PLA 3D printer filament (Polylactic acid)  is a biodegradable and bioactive thermoplastic  aliphatic polyester derived from renewable resources.

Print temp :190 - 220 degrees 

Heated Bed :- 0 - 60 degrees 

Speed range : 50 - 80mm/s optimal

Printability : Easy

Net Weight: 1kg

R275.00  Inc VAT
SA Filament PLA Black (1.75mm) 1Kg (SAfilament Black PLA)

PLA 3D printer filament (Polylactic acid)  is a biodegradable and bioactive thermoplastic  aliphatic polyester derived from renewable resources.

Specification

Print temp :190 - 220 degrees 

Heated Bed :- 0 - 60 degrees 

Speed range : 50 - 80mm/s optimal

Printability : Easy

Net Weight: 1kg


What's in the box ?

1 x SA Filament PLA Black (1.75mm)

R275.00  Inc VAT
Per Page      21 - 40 of 69