3D Printing and Engraving

3D Printing/engraving related items
Sort By:  
Coming Soon. Login and add this item to your wishlist to be notified when stock arrives. Pricing is estimated at this stage and might change.
R499.90  Inc VAT
Coming Soon. Login and add this item to your wishlist to be notified when stock arrives. Pricing is estimated at this stage and might change.
R189.90  Inc VAT
Coming Soon. Login and add this item to your wishlist to be notified when stock arrives. Pricing is estimated at this stage and might change.
R29.90  Inc VAT
DaVinci Lab PLA filament (1.75mm 1Kg) Brown (WH PLA Da Vinci BROWN)

DaVinci Lab’s PLA  (Polylactic acid) is a biodegradable and bioactive thermoplastic  aliphatic polyester derived from renewable resources.

  • Davinci Lab PLA
  • Print temp :- 190 - 220 degrees 
  • Heated Bed :- 50 - 60 degrees (optional)
  • Speed range :- 50 - 80mm/s optimal
  • Printability :- Easy
  • Weight: - 1kg

Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
R249.00  Inc VAT
DaVinci Lab PLA filament (1.75mm 1Kg) Grey (WH PLA Da Vinci GREY)

DaVinci Lab’s PLA  (Polylactic acid) is a biodegradable and bioactive thermoplastic  aliphatic polyester derived from renewable resources.

  • Davinci Lab PLA
  • Print temp :- 190 - 220 degrees 
  • Heated Bed :- 50 - 60 degrees (optional)
  • Speed range :- 50 - 80mm/s optimal
  • Printability :- Easy
  • Weight: - 1kg

Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
R249.00  Inc VAT
DaVinci Lab PETG Filament 1kg (1.75mm) Black (WH filament PETG black)

The DaVinci Lab PETG 3D printer filament (Polyethylene Terephthalate) is one of the most common used polymers today. It is also used in the manufacture of food packaging, water bottles and many other common plastic items. PETG filament has proven its worth as a durable material that is easy to use. Figuratively speaking, it combines the most useful characteristics of ABS filament with the ease of printing that PLA filament affords.

PETG features:
  • Higher strength
  • Lower shrinkage
  • Combines good strength with ductility, making it a good, tough material for mechanical parts
  • Good chemical resistance
  • Contains UV absorber
  • Good hydrophobicity (does not absorb water easily)

The DaVinci Lab PETG filament has the following characteristics:

  • 100% virgin material without cheap plastic fillers
  • Print Temperature: 210 – 250°C, dependent on printer model
  • Heat Bed temperature: 90 – 110°C
  • 1Kg net weight
  • Accurate diameter of 1.75mm with a tolerance of ± 0.05mm
  • Spool Size: diameter 197mm, inner hub 60mm & height 60mm
  • Vacuumed Sealed With Desiccant
  • ROHS Certification from SGS testing


Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
R349.90  Inc VAT
DaVinci Lab PETG Filament 1kg (1.75mm) White (WH filament PETG white)

The DaVinci Lab PETG 3D printer filament (Polyethylene Terephthalate) is one of the most common used polymers today. It is also used in the manufacture of food packaging, water bottles and many other common plastic items. PETG filament has proven its worth as a durable material that is easy to use. Figuratively speaking, it combines the most useful characteristics of ABS filament with the ease of printing that PLA filament affords.

PETG features:
  • Higher strength
  • Lower shrinkage
  • Combines good strength with ductility, making it a good, tough material for mechanical parts
  • Good chemical resistance
  • Contains UV absorber
  • Good hydrophobicity (does not absorb water easily)

The DaVinci Lab PETG filament has the following characteristics:

  • 100% virgin material without cheap plastic fillers
  • Print Temperature: 210 – 250°C, dependent on printer model
  • Heat Bed temperature: 90 – 110°C
  • 1Kg net weight
  • Accurate diameter of 1.75mm with a tolerance of ± 0.05mm
  • Spool Size: diameter 197mm, inner hub 60mm & height 60mm
  • Vacuumed Sealed With Desiccant
  • ROHS Certification from SGS testing


Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
R349.90  Inc VAT
Geekcreit® 3D Printer A4988 Reprap Stepper Motor Driver Module (red stepper driver)
Description:

A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the regulator in slow or mixed decay modes. A4988 converter is the key to the easy implementation. As long as the "step" input inputting one pulse drives the motor one microstep. There are no phase sequence tables, high frequency control lines, or complex interfaces to program.

In the micro-step operation, A4988 chopping control inside automatically selects the current decay mode (Slow or Mixed). In mixed decay mode, the device is initially set to a fixed downtime in some fast decay, then the rest of the slow decay downtime. Mixed decay current control scheme results in reduced audible motor noise, increased step accuracy, and reduced power consumption. Internal synchronous rectification control circuitry is provided to improve the pulse-width modulation (PWM) operation power consumption. Internal circuit protection includes: thermal shutdown with hysteresis, undervoltage lockout (UVLO), and crossover-current protection. Special power sequencing.

A4988 surface mount QFN package (ES), a size of 5 mm × 5 mm, nominal overall package height of 0.90 mm, with an exposed pad for enhanced thermal dissipation. This package is Pb (suffix-T), with 100% matte tin leadframe plating.

Features:

Simple step and direction control interface
Short-to-ground and shorted-load protection
Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above       your stepper motor’s rated voltage to achieve higher step rates

Package includeds:

1 x Step motor driver module

How to control a stepper motor with Arduino
R36.90  Inc VAT
Creality 3D® Printer M6 Thread Nozzle Brass Pneumatic Connector Quick Joint For Extruder (3D feed nozzle)
Specifications:

Product configuration: 4mm x 2mm Teflon tube
Product thread: M6 thread
Product use: Extruder
Material: Brass


Package Inlcudes:

1 x Creality 3D® pneumatic Connector
R24.90  Inc VAT
Creality 3D® Extruder Back Support Plate With Pulley For CR-10 CR-10S Series 3D Printer (3B6 Base plate with wheels)
Specifications:

Item: Extruder Back Support Base Plate with wheels
Material: Metal
Color: Black
Fit for: CR-10 CR-10S Series 3D Printer


Package Includes:

1x Creality 3D® Extruder Back Support Plate With Wheels
R289.90  Inc VAT
Reprap Ramps 1.6 Kit with Mega 2560 r3 + Heatbed MK2B + 12864 LCD Controller + DRV8825 +Mechanical Switch +Cables for 3D Printer (ramp 1.6 3d print kit)
MK2B
   The latest and the best type of heatbed money can buy as of today. 100% compatible
   with all Prusa and Mendel 3d printer variants.
   Color: Red
   Size: 214mm x 214mm
   Etching: 35um copper
   Laminate: FR4 1.6mm

Mega 2560

   Microcontroller : ATmega2560
   Operating Voltage : 5V
   Input Voltage (recommended) : 7-12V
   Input Voltage (limits) : 6-20V
   Digital I/O Pins : 54 (of which 14 provide PWM output)
   Analog Input Pins : 16
   DC Current per I/O Pin : 40 mA
   DC Current for 3.3V Pin : 50 mA
   Flash Memory : 256 KB of which 4 KB used by bootloader
   SRAM : 8 KB
   EEPROM : 4 KB

12864 LCD Controller Board

   3D printers use LCD control panel, are ramps extension accessories. LCD control panel through
   which you can achieve spooling is the 3D model Gcode files are copied to the SD card, and then
   print the file via the LCD control panel. This version is an upgraded version of reprap smart     controller.

DRV8825 Stepper Motor Driver

   The DRV8825 stepper motor driver carrier board TI DRV8825 micro bipolar stepper motor drive is
   a breakthrough. The module has a pinout and interface with our A4988 stepper motor driver carrier
   is almost the same, so it can be used as a better performance of the pull-down menu board
   replacement in many applications. DRV8825 features an adjustable current limit, overcurrent and
   overtemperature protection, six micro-resolution (down 1/32-step). It uses 8.2 - 45 V, can provide
   up to about 1.5 per phase no heat sink or forced air flow (rated up to 2.2 per volume sufficient
   additional cooling).
   A simple steps and direction control interface
   Six different steps resolutions: full step, half step, 1/4-step1/8-step1/16-step, 1/32-step
   CAN interface directly with 3.3 V and 5 V systems
   Over-temperature thermal shutdown, overcurrent shutdown, undervoltage lockout
   Short to ground short circuit load protection
   4 Layer 2 oz copper PCB, in order to improve heat dissipation
   Exposed solder ground below the bottom of the driver IC on the printed circuit board pad
   Module size, pin and interface matching A4988 stepper motor driver operators in many ways
   Adjustable current control lets you set a potentiometer, which lets you use the stepper motor's
   rated voltage or more, in order to achieve a higher rate of maximum output current step
   Intelligent chopping control automatically selects the correct current decay mode (fast decay or
   slow decay)
   Maximum 45 V supply voltage
   Built-in voltage regulator (the need for any external logic supply voltage)

Limit Switch Endstop

   Quality switching elements.
   Customized high quality connection, using 22AWG wire, copper wire inside is very thick, can be
   resistant to current 2A, 300V voltage. An insulating layer over a wide range of temperatures, up to
   80 degrees. Is the common connection of thin copper wire can not match. Not easy to pull off, plug
   it convenient, for ease of use, plug the other side to do the one, you can use the direct plug.
   Red line connecting VCC (ramps of +)
   Connect the black wire GND (ramps of -)
   Green Line connection SIGNAL (ramps in s)
   tips: Under normal circumstances, the system must be configured to at least three mechanical switches.
   Pros: Easy to install

Find more help at the following links:

https://reprap.org/wiki/RAMPS_1.6

https://github.com/bigtreetech/ramps-1.6/tree/master/Ramps1.6/firmware/Marlin
R799.90  Inc VAT
3D Printer Stepstick Drv8825 Stepper Motor Driver replace A4988 (3D2 purple print driver)
Product Features

1 simple steps and direction control interface
2 six different steps resolutions: full step, half step, 1/4-step1/8-step1/16-step, 1/32-step
3.CAN interface directly with 3.3 V and 5 V systems
4 Over-temperature thermal shutdown, overcurrent shutdown, undervoltage lockout
5 short to ground short circuit load protection
6.4 Layer 2 oz copper PCB, in order to improve heat dissipation
7 exposed solder ground below the bottom of the driver IC on the printed circuit board pad
8 module size, pin and interface matching A4988 stepper motor driver operators in many ways
9 adjustable current control lets you set a potentiometer, which lets you use the stepper motor's rated voltage or more, in order to achieve a higher rate of maximum output current step
10 Intelligent chopping control automatically selects the correct current decay mode (fast decay or slow decay)
11 Maximum 45 V supply voltage
12 built-in voltage regulator (the need for any external logic supply voltage)


How to control a stepper motor with Arduino
R39.85  Inc VAT
1 Meter 3d-printer heatbed sealing wire MK2A /MK2B/MK3 heat bed weld line (1m heatbed line)
1 Meter 3d-printer heatbed sealing wire MK2A /MK2B/MK3 heat bed weld line
R33.90  Inc VAT
Silver 1/8 Teeth Thread Nozzle Quick Direct Pneumatic Connector For 3D Printer (3C6 Pneumatic connector 4)
Specifications:

Color: Silver
Screw thread: 1/8 teeth
Application: For 3D printer
The upper part can be used to insert a 4mm pipe and self lock


Package Includes:

1 x Pneumatic connector
R39.99  Inc VAT
Creality 3D® Ultrabase 235*235*3mm Glass Plate Platform Heated Bed Build Surface for Ender-3 MK2 MK3 Hot bed (3D4 tempered glass bed)
Notes: Due to the different product batch, the position of Logo in the galss plate may change, thank you for your understanding.

Features:
 
- Excellent adhesion: Ultrabase covered by microporous coating, shows strong adhesion in printing.                            
- Easy to take off models by hand or with a little help from the scrapper for very large model           
- Ultrabase integrated with heated bed: Super Flatness, Fast and uniform heating           
- Durable: The special coating is inorganic and has a hardness of 8 Mohs, and it is capable to work at 400ºC.
- Easy to clean: Ultrabase is easy to clean by alcohol/water.

Specifications:

Size:
 235 x 235 x 3mm
Material: Tempered glass
Application: For ender-3/pro 3D printer

 
Temperature Settings For Different Filaments:
1.PLA: 50-65ºC
2. ABS: 80-120ºC
3. PC: 100-125ºC
4. Nelon: 100-130ºC
5. PP: 100-130ºC
6. PETG: 70-90ºC
7. TPU: 40-60ºC

Package Includes:


1x Creality 3D® Glass Platform
R459.90  Inc VAT
3D Printer Nozzle Cleaning Tool Drill Bit 0.4mm Size For Extruder (3C6 0.4mm nozzle clean tool)
Specifications:

Applicable models: 3D printer nozzle 0.4mm
Material: Stainless steel


Package includes:

1 x Nozzle-clearing drill
R19.90  Inc VAT
Assembled Extruder Hot End kit for CREALITY 3D Printer CR-X Dual-color Printing Nozzle (3C6 CR-X dual extruder)

Description:

 

  • Material: Aluminum & Stainless Steel & Brass
  • Installation type: external thread connection
  • Scope of application: 3D printer
  • Nozzle size: 0.4mm
 

Features:

100% brand new and high quality.

Tip of the nozzle, aluminum heating block, Throat pipe (built-in Teflon).

MK10 Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 12V/24V  40W.

 

 

Package includes:

1 x CR-X Extruder Hot End Kit 

R1,099.90  Inc VAT
Creality3D CR-10 Max 3d Printer Larger Printing Size 450mm x 450mm x 470mm (CR-10 Max)
  • larger printing size:450*450*470mm with Golden triangle for better stability
  • rapid heat-up of entire platform.100% real heating size
  • imported Capricorn Teflon tube,
  • double drive for rapid feeding
  • double boost effect rail-type transmis
  • Package Size: 735*735*305mm
  • Weight: 24.8kg

Dual-Drive Bowden Extruder | 260°C Hotend Temperature | Dual-Driven Y-Axis Rails
R14,599.90  Inc VAT
BIGTREETECH SKR V1.3 Control Board 32 Bit ARM CPU Smoothieboard For 3D Printer Reprap (v1.3 smooth reprap board)
Description:

Model Number: BIGTREETECH SKR V1.3
Product name: SKR V1.3 32-Bit Board
Material: 4-layer PCB
MPU: ARM Cortex-M3 CPU
Main Control Chip: LPC1768
Input Voltage: DC12V-DC24V
Current: 5A-15A
Support Display: 2.8 "TFT, 3.5" TFT, LCD2004, LCD12864
Support Driver: TMC2130, TMC2130SPI, TMC2208, TMC2208UART, ST820, DRV8825, A4988...

Support file format: G-code
Recommended software: Cura, Simplify3D, pronterface, Repetier-host, Makerware
Support firmware : Marlin2.0 , Smoothieware
Temperature Sensor Interface: TH0, TH1, TB, 3 channel 100K NTC (thermal resistance)


Support docs:

1. http://www.dropbox.com/s/x3cgq7tqbhk2yfd/SKR%20V1.3-Instructions.pdf?dl=0
2. https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/blob/master/SKR%20V1.3-Instructions.pdf
3. https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3


Package includes:

1 x SKR V1.3 32-Bit Board
1 x USB Cable
Coming Soon. Login and add this item to your wishlist to be notified when stock arrives. Pricing is estimated at this stage and might change.
R499.90  Inc VAT
2x4 PTFE Tube Cutter Kit for 3D Printer (PTFE cutter kit)
Features:

In order to  properly seat your Bowden tube, it is key to have a clean, square end. Without this, you risk oozing, or worse, clogging in the hot end. This super-sharp tubing cutter is the perfect tool for obtaining a clean, square cut in your tubing, every time.

This kit includes:


3 x PC4-01 pneumatic plugs
3 x KJH 04-M6 pneumatic plugs
1m  ID2mm OD4mm blue PTFE tube
1 x flat screwdriver
1 x cutter with a replacement blade
2 x Blue cable buckles
2 x 10 * 25mm yellow springs
Coming Soon. Login and add this item to your wishlist to be notified when stock arrives. Pricing is estimated at this stage and might change.
R189.90  Inc VAT
PTFE Tube Cutter For 3D Printer (PTFE cutter)
Features:

In order to  properly seat your Bowden tube, it is key to have a clean, square end. Without this, you risk oozing, or worse, clogging in the hot end. This super-sharp tubing cutter is the perfect tool for obtaining a clean, square cut in your tubing, every time.

Features a stainless steel blade and switch button. The housing is made from tough durable plastic. Can also be used to cut filament. But do not use as a wire cutter or you will dull the blade.

Package includes:

1 x Tube Cutter
Coming Soon. Login and add this item to your wishlist to be notified when stock arrives. Pricing is estimated at this stage and might change.
R29.90  Inc VAT
Filament Factory SuperPLA™ PETG Blue 1.75mm 1Kg (WH Filament factory blue PETG)

SDE – Strong, Durable and Easy to use.

Specially formulated Filament Factory SuperPLA, blended to give best flow and best strength. SuperPLA is as durable as ABS, almost as strong as nylon and as easy to use as PLA.

Supplied on a plastic reel 200 diameter x 80mm width x 100mm bore All our filament is standard 1.75mm diameter. This material is not available in 2.85mm.
Weight is 1kg filament.
We recommend 245degC nozzle temp, 90degC bed, cooling fan on.
This product is highly susceptible to moisture and might require drying before use

Manufactured in South Africa.

R266.90  Inc VAT
Filament Factory SuperPLA™ PETG Red 1.75mm 1Kg (WH Filament factory red PETG)

SDE – Strong, Durable and Easy to use.

Specially formulated Filament Factory SuperPLA, blended to give best flow and best strength. SuperPLA is as durable as ABS, almost as strong as nylon and as easy to use as PLA.

Supplied on a plastic reel 200 diameter x 80mm width x 100mm bore All our filament is standard 1.75mm diameter. This material is not available in 2.85mm.
Weight is 1kg filament.
We recommend 245degC nozzle temp, 90degC bed, cooling fan on.
This product is highly susceptible to moisture and might require drying before use

Manufactured in South Africa.

R266.90  Inc VAT
Per Page      81 - 100 of 103