All Products

Sort By:  
This is the Raspberry Pi board only. You will need a Power Supply, micro SD, HDMI Cable, Display, Input devices and Case as well
R259.90  Inc VAT
This is the Raspberry Pi board only. You will need a Power Supply, micro SD, HDMI Cable, Display, Input devices and Case as well
R194.30  Inc VAT
This is the Raspberry Pi board only. You will need a Power Supply, micro SD, HDMI Cable, Display, Input devices and Case as well
R539.90  Inc VAT
This is the Raspberry Pi board only. You will need a Power Supply, micro SD, HDMI Cable, Display, Input devices and Case as well
R799.90  Inc VAT
This is the V2.1 camera. OS releases from Bullseye onwards will no longer support the older camera system and applications. There is no Python interface yet. An alternative to the old Picamera, imaginatively named Picamera2, is in development. Raspberry Pi OS Buster is still available to download if you’re not ready to use Bullseye
R479.90  Inc VAT
Want to add three extra USB ports and ethernet connection to your Raspberry Pi Zero?
R139.90  Inc VAT
500W Spindle motor with chuck, power supply and speed controller for CNC.
R2,399.90  Inc VAT
This is the Raspberry Pi board only. You will need a Power Supply, micro SD, HDMI Cable, Display, Input devices and Case as well
R419.90  Inc VAT
This unit is ideal to clamp down your materials on your cnc router/engraver bed
R229.90  Inc VAT
These are the replacement blades for the round joystick module.
R10.90  Inc VAT
Temperature measurement range: -55°C ~ +125°C
R19.90  Inc VAT
This is the Raspberry Pi board only. You will need a Power Supply, micro SD, HDMI Cable, Display, Input devices and Case as well
R729.90  Inc VAT
Raspberry Pi Zero W (ZERO W board)


Maximum 1 Unit Per Order. If you require Raspberry Pi Zero Wireless in bulk, we allow quantity purchases of the Raspberry Pi Zero Wireless with pre-soldered headers!

Description:

The Raspberry Pi Zero Wireless has landed at PiShop! The Raspberry Pi Zero is an ultra low cost and ultra small variant of the original Raspberry Pi. It's tiny, measuring just 65mm x 30mm, and is perfectly designed for embedded applications, wearables, prototyping and any other Pi based tinkering you can think of, on a micro scale! The Raspberry Pi Zero Wireless features on board Wireless Internet & Bluetooth for all your connectivity needs!

The Raspberry Pi Zero features a BCM2835 chipset, overclocked to 1Ghz with 512MB RAM, and the same 1080p video output, so there's plenty of oomph in that little board. It also features the same 40 pin GPIO layout as the Raspberry Pi 2/B /A , which you'll need to solder your own headers to. With it's small form factor and reduction in connectors, the Raspberry Pi Zero only uses ~ 140mA at 5V!

Unlike it's larger brothers and sisters, the Raspberry Pi Zero has an unpopulated GPIO, unpopulated composite (RCA) header and an unpopulated reset header. There's also no DSI screen port, no ethernet, no analogue audio and no full sized USB ports. Instead, the Pi Zero features a micro-USB power port, a micro USB OTG host port (for peripherals e.g. WiFi dongle), and a mini HDMI port for video. 

HAT Compatibility Note: The Pi Zero is fully compatible with all HAT breakout boards, as it features the same 40 Pin GPIO as the Raspberry Pi 2/B /A

Raspberry Pi Zero Wireless Features:

  • BCM2835 chipset, Overclocked to 1Ghz 
  • 512MB RAM
  • Tiny Form Factor: 65mm x 30mm x 5mm
  • Fully HAT compatible
  • 40pin GPIO (Unpopulated)
  • Stream and watch Hi-definition video output at 1080P
  • Micro SD Slot for OS 
  • Tiny Current Draw ~ 140mA at 5V!
  • Mini-HDMI for Video
  • Micro-USB OTG Host for Data
  • Micro-USB for Power
  • Micro-CSI Camera Port
  • On-Board WiFi
  • On-Board Bluetooth

Raspberry Pi Operating System Downloads: https://www.raspberrypi.org/downloads/
Getting Started with Raspberry Pi

This is the Raspberry Pi board only. You will need a Power Supply, micro SD, HDMI Cable, Display, Input devices and Case as well
R259.90  Inc VAT
Raspberry Pi Zero v1.3 (RPi Zero v1.3 board)

Maximum 1 Unit Per Order. If you require Raspberry Pi Zero Wireless in bulk, we allow quantity purchases of the Raspberry Pi Zero Wireless with pre-soldered headers!

This is the first release of Raspberry Pi Zero and doesn't have onboard Wifi or BLE.

Description:

The Raspberry Pi Zero features a BCM2835 chipset, overclocked to 1Ghz with 512MB RAM, and the same 1080p video output, so there's plenty of oomph in that little board. It also features the same 40 pin GPIO layout as the Raspberry Pi 2/B /A , which you'll need to solder your own headers to. With it's small form factor and reduction in connectors, the Raspberry Pi Zero only uses ~ 140mA at 5V!

Unlike it's larger brothers and sisters, the Raspberry Pi Zero has an unpopulated GPIO, unpopulated composite (RCA) header and an unpopulated reset header. There's also no DSI screen port, no ethernet, no analogue audio and no full sized USB ports. Instead, the Pi Zero features a micro-USB power port, a micro USB OTG host port (for peripherals e.g. WiFi dongle), and a mini HDMI port for video. 

HAT Compatibility Note: The Pi Zero is fully compatible with all HAT breakout boards, as it features the same 40 Pin GPIO as the Raspberry Pi 2/B /A

Raspberry Pi Zero Features:

  • BCM2835 chipset, Overclocked to 1Ghz 
  • 512MB RAM
  • Tiny Form Factor: 65mm x 30mm x 5mm
  • Fully HAT compatible
  • 40pin GPIO (Unpopulated)
  • Stream and watch Hi-definition video output at 1080P
  • Micro SD Slot for OS 
  • Tiny Current Draw ~ 140mA at 5V!
  • Mini-HDMI for Video
  • Micro-USB OTG Host for Data
  • Micro-USB for Power
  • Micro-CSI Camera Port
Note: As this product is limited to 1 per customer; We reserve the right to cancel multiple and/or duplicate orders.

Raspberry Pi Operating System Downloads: https://www.raspberrypi.org/downloads/
Getting Started with Raspberry Pi

This is the Raspberry Pi board only. You will need a Power Supply, micro SD, HDMI Cable, Display, Input devices and Case as well
R194.30  Inc VAT
Raspberry Pi1 Model B (Pi1 B board)
Description:

The Raspberry Pi is a low cost, credit-card sized computer that plugs into a computer monitor or TV, and uses a standard keyboard and mouse. We want to see the Raspberry Pi being used by kids all over the world to learn to program and understand how computers work.

RASPBERRY PI BOARD, MODEL B , 512MB

  • Core Architecture:  ARM
  • Core Sub-Architecture:  ARM1176JZF-S
  • No. of Bits:  32bit
  • Silicon Core Number:  BCM2835
  • Silicon Family Name:  BCM2xxx
  • Silicon Manufacturer:  Broadcom
  • Clock Frequency Max:  700MHz
Specification:
  • 40 Pin extended GPIO header
  • x4 USB 2 ports up to 1.2A
  • Combined 4-pole jack for stereo audio and composite video output
  • MicroSD card slot for loading your operating system and storing data
  • Micro USB power source(Power supply not included)
  • CSI and DSI for connecting the Raspberry Pi camera and touchscreen display
  • The first x26 GPIO pins are 100% backward compatible with Model B
  • HDMI video output for 1080P Hi-definition video
  • 10/100 Ethernet port for network connectivity
  • More energy efficient

Legislation and Environmental

  • RoHS Compliance:  Yes

 

Contents:
  • 1 x Raspberry Pi Model B
What else do I need?:

Resources:
This is the Raspberry Pi board only. You will need a Power Supply, micro SD, HDMI Cable, Display, Input devices and Case as well
R539.90  Inc VAT
Raspberry Pi 2 - Model B (Pi2 B board)
Description:

The Raspberry Pi 2 Model B can be found at PiShop! The  ultra-low-cost, deck-of-cards sized Linux computer has had yet another  makeover, this time the Raspberry Pi Foundation have gone all out! The Raspberry Pi 2 Model B is on a completely new level to its predecessors by being a staggering 6x faster than the Raspberry Pi Model B .

Back-Compatibility note: The Raspberry Pi 2 Model B has the same footprint and layout as the previous Model B version, so will fit all Model B items.

Raspberry Pi 2 Model B Features:

  • 6x Faster - Broadcom BCM2836 ARMv7 Quad Core Processor powered Single Board Computer running at 900MHz
  • Double Memory - 1GB RAM so you can now run bigger and more powerful applications
  • Identical  board layout and footprint as the Model B , so all cases and 3rd party  add-on boards designed for the Model B will be fully compatible.
  • Fully HAT compatible
  • 40pin  extended GPIO to enhance your “real world” projects. GPIO is 100%  compatible with the Model B and A boards. First 26 pins are identical  to the Model A and Model B boards to provide full backward compatibility  across all boards.
  • Connect a Raspberry Pi camera and touch screen display (each sold separately)
  • Stream and watch Hi-definition video output at 1080P
  • Micro SD slot for storing information and loading your operating systems.
  • Advanced power management:
  • You  can now provide up to 1.2 Amp to the USB ports – enabling you to  connect more power hungry USB devices directly to the Raspberry PI.  (This feature requires a 2Amp micro USB Power Supply)
  • 10/100 Ethernet Port to quickly connect the Raspberry Pi to the Internet
  • Combined 4-pole jack for connecting your stereo audio out and composite video out
Specifications:
  • Broadcom BCM2836 ARMv7 Quad Core Processor powered Single Board Computer running at 900MHz
  • 1GB RAM
  • 40pin extended GPIO
  • 4 x USB ports
  • 4 pole Stereo output and Composite video port
  • Full size HDMI
  • CSI camera port for connecting the Raspberry Pi camera
  • DSI display port for connecting the Raspberry Pi touch screen display
  • Micro SD port for loading your operating system and storing data
  • Micro USB power source
Contents:
  • 1 X Raspberry Pi 2 - Model B
Resources:
This is the Raspberry Pi board only. You will need a Power Supply, micro SD, HDMI Cable, Display, Input devices and Case as well
R799.90  Inc VAT
3-24V Piezo Electronic Tone Buzzer Alarm 95DB Continuous Sound (buzzer 3-24VDC)
Description:

 Piezo Electronic Tone Buzzer Alarm 95DB for Continuous Sound. The piezo sounders are like buzzers. The speaker in the buzzer can be optimized for a single sound, no need to reproduce music.

Specifications:
  • Color: Black
  • Buzzer Type: Piezoelectric
  • Sound Pressure Level 85 dB
  • Rate Voltage: 12V DC
  • Operating Voltage: 3 - 24V
  • Max Current Rating 11mA
  • Frequency 3900±500Hz
  • Drive Method: Drive Circuit Built in
  • Mounting Holes
Contents:
  • 1 x 85DB Piezoelectric Buzzer Alarm
Resources:
R21.90  Inc VAT
SanDisk Ultra Fit USB 3.1 Flash Drive 16GB (Sandisk flash fit 16GB)

Add Space, Fast. Just Plug It In.

The simple way to add extra, high-speed storage to your device! The SanDisk Ultra Fit™ USB 3.1 Flash Drive delivers performance that lets you move a full-length movie up to -15x faster than with standard USB 2.0 drives. Plus, thanks to its compact, streamlined design, you can plug it in and leave it in.

Compact plug-and-stay design

This compact flash drive is designed as plug-and-stay storage for laptops, tablets, TVs, gaming consoles, car audio systems, and more. Plug it in, and you’ve got instant storage that’s always on board!

High-speed USB 3.1 performance
Transfer files quickly with 130MB/s read speed. With write speeds up to 15x faster than standard USB 2.0 drives, you can move a full-length movie to the drive in less than 30 seconds.

SanDisk SecureAccess® software helps protect your privacy
Create a private folder on your drive with SanDisk SecureAccess software. This 128-bit AES encryption software makes it easy to password-protect critical files. Drag and drop files into the vault, and they'll be encrypted.

Full Specifications

Interface: USB 3.1 Gen 1
Connector: USB-A
Compatibility: USB 3.1 (backward compatible with USB 3.0 and USB 2.0)
Sequential Read Performance: Up to 130MB/s
Dimensions: 29.8mm x 14.3mm x 5mm

What's in the box?

1 x USB flash drive

Datasheet

Disclosures

  1. 32GB, 64GB, 128GB, 256GB, 512GB: Write up to 15X faster than standard USB 2.0 drives (4MB/s), read speeds up to 130MB/s. 16GB: Write faster than standard USB 2.0 drives (4MB/s); read speeds up to 130MB/s. USB 3.1 Gen 1 or USB 3.0 port required. Based on internal testing; performance may be lower depending on host device. 1MB=1,000,000 bytes. 
  2. Password protection uses 128-bit AES encryption and is supported by Windows® 7, Windows 8, Windows 10 and Mac® OS X® v10.9 (Software download required for Mac, see www.SanDisk.com/SecureAccess). FOR USE IN CHINA:  Password protection is supported by Windows® 7, Windows 8, Windows 10 and Mac® OS X® v10.9 (Software download required for Mac, see www.SanDisk.com/SecureAccess)
  3. Based on 1.2GB MPEG-4 video transfer to drive with USB 3.1 Gen 1 or USB 3.0 host device. Results may vary based on host device, file attributes, and other factors. 
  4. Registration required; terms and conditions apply.
  5. 1 GB=1,000,000,000 bytes. Actual user storage less. 
R119.90  Inc VAT
Raspberry Pi 7" Touchscreen Display (Official) (display 7 official)

The display will technically work with the Model A and Model B boards (connecting it to the DSI port on the Pi board), however the mounting holes on the back of the display will only line up with the newer board design (A , B , Pi2, Pi3 and Pi4)

Description:

The eagerly awaited 7" Official Raspberry Pi Touchscreen Display is here! Boasting a neat 800×480 display @ 60fps resolution, and 10 point capacitive touchscreen, this 7" screen for the Raspberry Pi gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems and embedded projects.

The 800x 480 display connects via an adapter board which handles power and signal conversion. Only two connections to the Pi are required; power from the Pi’s GPIO port and a ribbon cable that connects to the DSI port present on all Raspberry Pi’s. Touchscreen drivers with support for 10-finger touch and an on-screen keyboard are available on the latest Raspbian OS for full functionality without a physical keyboard or mouse.

  • Turn your Raspberry Pi into a touchscreen tablet, infotainment system, or standalone device.
  • Truly Interactive - the latest software drivers will support a virtual ‘on screen’ keyboard, so there is no need to plug in a keyboard and mouse.
  • Make your own ‘Internet of Things’ (IoT) devices including a visual display. Simply connect your Raspberry Pi, develop a Python script to interact with the display, and you’re ready to create your own home automation devices with touchscreen capability.
  • A range of educational software and programs available on the Raspberry Pi will be touch enabled, making learning and programming easier on the Raspberry Pi.
  • Raspberry Pi mounting points on the back

Technical Specification:

  • 7” Touchscreen Display.
  • Screen Dimensions: 194mm x 110mm x 20mm (including standoffs)
  • Viewable screen size: 155mm x 86mm
  • Screen Resolution 800 x 480 pixels
  • 10 finger capacitive touch.
  • Connects to the Raspberry Pi board using a ribbon cable connected to the DSI port.
  • Adapter board is used to power the display and convert the parallel signals from the display to the serial (DSI) port on the Raspberry Pi.

N.B. Will require the latest version of Raspbian OS to operate correctly.

Kit Contents:

  • 7” Touchscreen Display
  • Adapter Board
  • DSI Ribbon cable
  • 4 x stand-offs and screws (used to mount the adapter board and Raspberry Pi board to the back of the display
  • 4 x jumper wires (used to connect the power from the Adapter Board and the GPIO pins on the Pi so the 2Amp power is shared across both units)

Please Note. The Raspberry Pi Board and accessories are not included in this kit.

Installation instructions can be found at:
http://www.element14.com/community/docs/DOC-78156?ICID=rpimain-touchscreen-7inban#installI
 

R1,299.90  Inc VAT
Official Raspberry Pi3B and Pi3B Red & White Case (official case Pi3 Red/White)

PLEASE NOTE: Raspberry Pi not included.
Description:


The Official Raspberry Pi 3 Model B Case is now available! Specially made and beautifully crafted, this nifty and tactile snap-together case is designed to protect your RPi 3! Side pieces can be individually removed to enable access to the GPIO, and the top can also be removed to enable the addition of HATs or other GPIO periphery! There's even LED lights pipes to top it all off!

Features of the Official Raspberry Pi Case

  • Fabulous Raspberry Red and White Colour Combination

  • 5 Part "Snap-Fit" Enclosure

  • Cut-outs for all connection points

  • Micro SD card cut-out

  • Plastic LED light protector

  • Stick on rubber feet for case stability

    R159.90  Inc VAT
    Raspberry Pi Camera Board V2 (8MP,1080p) (RPi Cam 8MP V2)

    How to use Picamera with Raspberry Pi OS Bullseye: https://www.youtube.com/watch?v=E7KPSc_Xr24&list=WL&index=2

    Description:

    The Raspberry Pi Camera Module V2 is the new and improved official camera board from the Raspberry Pi Foundation! Custom designed and manufactured by the Raspberry Pi Foundation in the UK, the Raspberry Pi Camera Board V2 features an ultra-high quality 8 megapixel Sony IMX219 image sensor (up from 5MP on the V1 camera board), and a fixed focus camera lens. The V2 camera module is capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p90 video.

    The module attaches to Raspberry Pi by way of a 15 Pin Ribbon Cable, to the dedicated 15-pin MIPI Camera Serial Interface (CSI), which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data to the BCM2835 processor. A 150mm CSI cable is included with every camera.

    The board itself is tiny, at around 25mm x 23mm x 9mm, and weighs just over 3g, making it perfect for mobile or other applications where size and weight are important. 

    The Raspberry Pi Camera Board V2 Features:

    • Fixed focus lens on-board
    • 150mm CSI camera cable included
    • 8 megapixel native resolution sensor-capable of 3280 x 2464 pixel static images
    • Supports 1080p30, 720p60 and 640x480p90 video
    • Size 25mm x 23mm x 9mm
    • Weight just over 3g
    • Connects to the Raspberry Pi board via a short ribbon cable (supplied)
    • Camera v2 is supported in the latest version of Raspbian, Raspberry Pi's preferred operating system

    Note: to use the camera with Raspberry Zero, you need to buy a specific cable: Raspberry Pi Zero Camera Cable

    Getting started with PiCamera
    This is the V2.1 camera. OS releases from Bullseye onwards will no longer support the older camera system and applications. There is no Python interface yet. An alternative to the old Picamera, imaginatively named Picamera2, is in development. Raspberry Pi OS Buster is still available to download if you’re not ready to use Bullseye
    R479.90  Inc VAT
    3 Port USB Hub w/ Ethernet - Micro USB (Pi Zero) (3 port zero hub ethernet)
    Description:

    Want to add three extra USB ports and ethernet connection to your Raspberry Pi Zero? You need one of these adaptors! This one comes with a Micro USB B input, so it plugs directly into your Raspberry Pi Zero without the need for adaptors or shims!

    The hub has three full size USB inputs, so you can easily add USB peripherals like mice, keyboards and WiFi to your Zero! There's even a plug and play RJ45 Ethernet port, so you can get direct network connectivity for your Zero using this hub!

    3 Port USB Hub with Ethernet - Micro USB Features:

    • Fully compatible with the Raspberry Pi Zero
    • Micro USB 2.0 Input Port
    • 3 x USB Ports
    • 1 x RJ45 Ethernet Port (10/100)
    Want to add three extra USB ports and ethernet connection to your Raspberry Pi Zero?
    R139.90  Inc VAT
    Machifit ER11 Chuck CNC 500W Spindle Motor with 52mm Clamp and Power Supply Speed Governor (500w spindle motor kit)
    It only can be used with AC220V±10% 50/60Hz, not110V.

    Here are the links of  the CE Certification and the Environmental Certification:

    CE Certification: 

    https://www.dropbox.com/s/x937yu696g449o2/CE Certification .pdf?dl=0

    Environmental Certification: 
    https://www.dropbox.com/s/38ncgzktlsxlhvw/Environmental Certification .pdf?dl=0

    Description:

    If your project is not aiming to be the most heavy duty CNC machine out there, but is meant to be easy and inexpensive to build so that anyone can get a hand on a precise CNC, machining in many materials including metal. Then this is the perfect starting point for you.

    Specifications:


    Brand: Machifit
    Dimensions140mm×110mm×48mm (L*W*H)
    InputAC220V±10% 50/60Hz
    Spindle Motor500w
    Spindle Speed3000-12000r/min
    Motor Diameter52mm
    Motor Length208mm
    Operating Voltage100V DC
    Current6A
    SpeedUp to idle up to 15,000 rev / min
    Torque5000G/CM
    Insulation Resistance> 2 megohms
    Dielectric Strength400V
    High precision spindle runout 0.01-0.03

    Chuck size:
    Style: ER11
    Material: High Grade 45 Carbon Steel
    Total height: 18mm
    Outer diameter(Max.): 11.5mm
    Gripping Range: 3mm
    Small diameter: 7.8mm
    Fits metric shank size(s): 3mm metric shank

    Nut Size: 
    Inner Diameter: 8.7mm
    Height: 13mm
    Hex Diameter: 17mm
    Outer Diameter:19mm

    The Usage of "Don't pipe":
    Its function is to inhibit the switched source. If they are open, the source does not give tension. 
    If the short circuits, for example with a relay, the source generates the voltage to which it is regulated with the potentiometer.
    There will be no problem in controlling the motor using these pins.
     
    Package Includes:
    1 x 500W Spindle Motor
    1 x Power Supply
    1 x 52MM Mount Bracket
    1 X ER11 Collect
    4 x Screws



    500W Spindle motor with chuck, power supply and speed controller for CNC.
    R2,399.90  Inc VAT
    Raspberry Pi1 Model A (Pi1 A board)
    Description:

    Raspberry Pi 1 Model A has 40pin extended GPIO so user can build even bigger and better projects than ever before. The first 26 pins are identical to the Model A and B and B to provide 100% backward compatibility for your projects. Micro SD slot instead of the full size SD slot for storing information and loading your operating systems. The Board can now provide up to 1.2 AMP to the USB port enabling user to connect more power hungry USB devices directly to the Raspberry PI. (This feature requires a 2Amp micro USB Power Supply) The A board now uses less power (600mA) than the Model A Board (750mA) when running.

    Specifications:
    • 700MHz Broadcom BCM2835 CPU with 256MB RAM
    • 40pin extended GPIO
    • 1 x USB 2 ports
    • 4 pole Stereo output and Composite video port
    • Full size HDMI
    • CSI camera port for connecting the Raspberry Pi camera
    • DSI display port for connecting the Raspberry Pi touch screen display
    • Micro SD port for loading your operating system and storing data
    • Micro USB power source(Power supply not included)
    • Smaller board footprint and is fully HAT compatible
    • Stream and watch Hi-definition video output at 1080P
    • Combined 4-pole jack for connecting your stereo audio out and composite video out

     

    Model A to Model A Comparison:

    • Same Broadcom BCM2835 Chipset
    • Same 256MB RAM
    • Same full size HDMI port
    • Same CSI camera port and DSI display ports
    • Same micro USB power supply connection

    Key Improvements from Model A to Model A :

    • More energy efficient / uses less power
    • Supports a smarter board layout including an expanded GPIO header (40 pin instead of 26)
    • Micro SD Card port protecting your SD card from damage
    • Improved power management – now possible to drive ‘power hungry’ USB devices directly from your Raspberry Pi.
    Contents:
    • 1 X Raspberry Pi 1 Model A
    Resources:

     

    Getting Started with Raspberry Pi

    This is the Raspberry Pi board only. You will need a Power Supply, micro SD, HDMI Cable, Display, Input devices and Case as well
    R419.90  Inc VAT
    WS 264x176 2.7 inch 3 colour E-Ink display HAT for Raspberry Pi (2.7 3colour E-Ink HAT)
    Please Note: Raspberry Pi not included

    Description:

    This is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264x176 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.

    Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

    Features
    • No backlight, keeps displaying last content for a long time even when power down
    • Ultra low power consumption, basically power is only required for refreshing
    • Compatible with Raspberry Pi 2B/3B/Zero/Zero W
    • SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
    • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
    Specifications
    • Operating voltage: 3.3V
    • Interface: 3-wire SPI, 4-wire SPI
    • Outline dimension: 85mm × 56mm
    • Display size: 57.288mm × 38.192mm
    • Dot pitch: 0.217 × 0.217
    • Resolution: 264 × 176
    • Display color: red, black, white
    • Grey level: 2
    • Full refresh time: 15s
    • Refresh power: 26.4mW(typ.)
    • Standby power: <0.017mW
    • Viewing angle: >170°
    Please note: Raspberry Pi not included

    Interface
    SYMBOLDESCRIPTION
    VCC3.3V
    GNDGround
    DINSPI MOSI pin
    CLKSPI SCK pin
    CSSPI chip selection, low active
    DCData/Command selection (high for data, low for command)
    RSTExternal reset, low active
    BUSYBusy status output, low active
    Development Resources

    Wiki : www.waveshare.com/wiki/2.7inch_e-Paper_HAT_(B)

    Package Includes:

    1. 2.7inch e-Paper HAT (B) x 1
    2. RPi screws pack (2pcs) x 2
    R349.90  Inc VAT
    45x30x11mm CNC Router/Engraver Quick Clamp Chuck (CNC table clamp)
    Description:

    On CNC machining centers or through feed machines, tool changing is usually a time consuming task. As a consequence, drilling stations often become a production bottleneck due to the resulting down-times. The use of quick-clamping drill chucks reduces machine downtime considerably. Drills can be changed quickly, easily and without additional tools directly on the machine. The high concentricity accuracy of the system also enables perfect drill holes.

    Specification:

    Material: Metal
    Size(Length x Width x Height): about 45 x 30 x 11mm (1.77 x 1.18 x 0.43” )

    Usage Steps
    Regulate the height of the front end of the screw, press the red handle and start carving, convenient and quick.

    Package Includes:
    1 x Quick clamp
    This unit is ideal to clamp down your materials on your cnc router/engraver bed
    R229.90  Inc VAT
    LM8UU 8mm Linear Ball Bearing for CNC (LM8UU 8mm Linear Bearing)
    Description :

    These Linear Ball Bearings are LM8UU type Bearings with 8mm Inner Diameter, 15mm Outer Diameter and 24mm Length. They are ideal for applications in which parts or coupled components need to move along smooth and straight rods with precision accuracy, where friction can result in lowered accuracy, which of course leads to lowered process quality.

    Specifications : 

    Brand new and excellent quality material.
    Linear bearing ball cage, hardened coat of both ends ring.
    Made of carbon chromium bearing steel, safe and reliable.
    Ball in the cage loop to run a smooth ball guide surface to ensure stability even if high-speed.

    Model : LM8UU
    Shaft ID : 8 mm
    Shaft OD : 15 mm

    Package Includes : 

    1 x LM8UU Bearing
    R49.90  Inc VAT
    REPLACEMENT BLADES FOR ROUND 4-WAY AND ROUND 8-WAY JOYSTICKS (Blades for round arcade joystick)
    Description:

    Spare blades for 4-way round joysticks as well as 8-way round joysticks.

    Making the blades of your 4-way round Joystick easy to replace.

    What's in the box?

    1 x Replacement Blades
    These are the replacement blades for the round joystick module.
    R10.90  Inc VAT
    DS18B20 Temperature Sensor TO-92 (DS18B20 Temperature Sensor)
    Specification:

    Temperature measurement range: -55°C ~ +125°C
    Accuracy: ± 0.5°C
    Encapsulation: TO-92

    You will need a 4.7k resistor

    Package includes:

    1 x DS18B20

    Adafruit's Raspberry Pi Lesson 11. DS18B20 Temperature Sensing

    Temperature measurement range: -55°C ~ +125°C
    R19.90  Inc VAT
    T-Slot Strut Profile PG 2040 x 1000mm (PG2040 extrusion 1m)
    Description:

    Strut Profile PG20 featuring 6mm T-slot is designed for constructing light weight assemblies such as precision frame structures, showcase etc.



    What's in the box:

    1 x 1m extrusion
    R189.90  Inc VAT
    Raspberry Pi 3 Model B plus (Pi3B plus board)
    Description:

    The Raspberry Pi 3 Model B plus is the latest product in the Raspberry Pi 3 range, boasting a 64-bit quad core processor running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT.

    The dual-band wireless LAN comes with modular compliance certification, allowing the board to be designed into end products with significantly reduced wireless LAN compliance testing, improving both cost and time to market. The Raspberry Pi 3 Model B maintains the same mechanical footprint as both the Raspberry Pi 2 Model B and the Raspberry Pi 3 Model B.

    We only stock UK made Raspberry Pi's manufactured in Sony's Pencoed factory in South Wales.

    Please Note. It is recommended to use a 2.5A Power Supply with the Raspberry Pi 3 B plus.

    Specifications

    • Processor
      • Broadcom BCM2387B0 chipset.
      • 1.4GHz Quad-Core ARM Cortex-A53 (64Bit)
    • Connectivity
      • 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
      • Gigabit Ethernet over USB 2.0 (maximum throughput 300Mbps)
      • 4 × USB 2.0 ports
    • GPU
      • Dual Core VideoCore IV® Multimedia Co-Processor. Provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode.
      • Capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs with texture filtering and DMA infrastructure
    • Memory
      • 1GB LPDDR2
    • Operating System
      • Boots from Micro SD card, running a version of the Linux operating system or Windows 10 IoT
    • Dimensions
      • 85 x 56 x 17mm
    • Power
      • 5V/2.5A DC via micro USB connector
      • 5V DC via GPIO header
      • Power over Ethernet (PoE) enabled (requires separate PoE HAT)


    Connectors

    • Ethernet
      • 10/100 BaseT Ethernet socket
    • Video Output
      • HDMI (rev 1.3 & 1.4)
      • Composite RCA (PAL and NTSC)
    • Audio Output
      • Audio Output 3.5mm jack
      • HDMI
      • USB 4 x USB 2.0 Connector
    • GPIO Connector
      • 40-pin 2.54 mm (100 mil) expansion header: 2x20 strip
      • Providing 27 GPIO pins as well as 3.3 V, 5 V and GND supply lines
    • Camera Connector
      • 15-pin MIPI Camera Serial Interface (CSI-2)
    • Display Connector
      • Display Serial Interface (DSI) 15 way flat flex cable connector with two data lanes and a clock lane
    • Memory Card Slot
      • Push/pull Micro SDIO

    The Raspberry Pi 3 Model B will remain in production
    until at least January 2023.

    WARNINGS
    • This product should only be connected to an external power supply rated at 5V/2.5 A DC. Any external power supply used with the Raspberry Pi 3 Model B shall comply with relevant regulations and standards applicable in the country of intended use.
    • This product should be operated in a well-ventilated environment and, if used inside a case, the case should not be covered.
    • Whilst in use, this product should be placed on a stable, flat, non-conductive surface and should not be contacted by conductive items.
    • The connection of incompatible devices to the GPIO connection may affect compliance, result in damage to the unit, and invalidate the warranty.
    • All peripherals used with this product should comply with relevant standards for the country of use and be marked accordingly to ensure that safety and performance requirements are met. These articles include but are not limited to keyboards, monitors, and mice when used in conjunction with the Raspberry Pi.
    • The cables and connectors of all peripherals used with this product must have adequate insulation so that relevant safety requirements are met.
    SAFETY INSTRUCTIONS

    To avoid malfunction of or damage to this product, please observe the following:
    • Do not expose to water or moisture, or place on a conductive surface whilst in operation.
    • Do not expose to heat from any source; the Raspberry Pi 3 Model B is designed for reliable operation at normal ambient temperatures.
    • Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board and connectors.
    • Whilst it is powered, avoid handling the printed circuit board, or only handle it by the edges to minimize the risk of electrostatic discharge damage.

    What's in the box?

    1 x Raspberry Pi board

    Resources:

    Getting Started with Raspberry Pi
    This is the Raspberry Pi board only. You will need a Power Supply, micro SD, HDMI Cable, Display, Input devices and Case as well
    R729.90  Inc VAT
    TEVO® 3D Printer Bearing Wheel for V-slot (3d printer wheel bearing)
    Description:

    Is it time to upgrade or repair your 3D Printer's pulley wheels with these high quality TEVO Pulleys made from POM (Polyoxymethylene/acetal)

    Specifications:

    Type: Pulley

    Outside Diameter: about 24mm
    Bore: 5mm
    Thickness: about 10.23mm
    Size: about 24mm x 16mm x 10.23mm
    Material: POM
    With Bearings: YES
    Bearing: 625zz bearing
     
    What's in the box?:

      1x Wheel with Bearing
    R24.90  Inc VAT
    Per Page      1181 - 1200 of 1277