Discontinued items that we no longer stock... give us a shout if you see something you need and we'll see if we are able to restock them. Email [email protected] Please include the link to the item.
Sort By:  
Bazinga! Let your Pi talk back with this slick little 11 x 5 LED matrix pHAT.
R146.27  Inc VAT
The HiFiBerry DAC+ Pro is a high-resolution digital-to-analog converter for the Raspberry Pi Model A+/B+/2B/3B.
R836.27  Inc VAT
Discontinued: 4.3inch HDMI LCD (B), 800x480, IPS, supports various systems, capacitive touch ( 4.3inch HDMI LCD (B), 800x480)

Please note: Raspberry Pi not included


  • IPS screen, 800x480 hardware resolution, configurable by software (up to 1920x1080)
  • Supports popular mini PCs such as Raspberry Pi, BB Black, Banana Pi, as well as general desktop computers
    • When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free
    • When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free
  • Multi languages OSD menu, for power management, brightness/contrast adjustment, etc.
  • 3.5mm audio jack, speaker connector, supports HDMI audio output

Development Resources

Wiki : www.waveshare.com/wiki/4.3inch_HDMI_LCD_(B)

R639.90  Inc VAT
Discontinued: T-Slot Strut Profile PG 2040 x 2000mm (AW PG2040 extrusion 2m)
Strut Profile PG20 featuring 6mm T-slot is designed for constructing light weight assemblies such as precision frame structures, showcase etc.

R279.90  Inc VAT
Discontinued: T-Slot Strut Profile PG 2020 x 2000mm (AW PG2020 extrusion 2m)
Strut Profile PG20 featuring 6mm T-slot is designed for constructing light weight assemblies such as precision frame structures, showcase etc.

R189.90  Inc VAT
Discontinued: -55 to 125 Degree Red LED Digital Temperature Meter Sensor (AW temp display & probe)

  This item could be used in many harsh applications such as refrigerators, air-conditioners, aquariums and so on.
With DC7-30V power range, you could power it with 12V DC easily. When out of range, the meter will display E2.
This Thermometer can only display the temperature in ℃.

Specifications :

Power Supply Voltage : DC7-30V(with anti-reverse protection)
Measuring Temperature : -55℃ to 125℃
Units of Measurement : ℃
Display Color : Red
Display : Three 0.56 Inch LED digital tube
Refresh Rate : About 300mS/ times
Minimum Input : -55℃
Maximum Input : 125℃
Accuracy : About 0.2℃
Overload : Please do not attempt to measure higher than 150℃
Operating Temperature : -40℃-85℃
Sensor : DS18B20, stainless steel sheath package, waterproof, anti-corrosion, high temperatures
Size: Approx. 47mmx28mmx25mm
Length of Sensor : 1m
Probe Dimensions : Approx. 25 x 6 mm (LxD)

Package includes :

1 x -55 ~125 Degree LED Thermometer Meter with probe
R200.74  Inc VAT
Discontinued: Creality 3D Ender-3 V1.1.3 Replacement Mainboard Print Size 220x220x250mm For Ender-3 3D Printer (AW Ender 3 main board v1.1.3)
Professional control motherboard, compatible for Ender3 3D printer.
The circuit board is optimized by circuit, effectively solve the heating problem.
Ender 3 motherboard supports 24V power input and can work with E/Z/Y/X axis motor.
With USB interface, convenient to connect and easy to operate.
Replacement board, best for Ender 3 220x220x250mm 3D Printer.

Compatible for: Ender 3
Voltage Input: 24V
Mainboard Size: 100mm x 70mm x 20m   

Do not touch the motherboard with wet hands and keep it dry.

Package List:
1 x Mainboard V1.1.3

R749.90  Inc VAT
Discontinued: 10Pcs 3mm Thickness 3D Printer Heating Block Cotton Hotend Nozzle Heat Insulation Cotton (AW 3B6 yellow insulation strips)

Purpose: 3D printer heat block insulation
Thickness: 3mm thick
- Quantity: 10Pcs

Package includes:

10 x Heat Insulation Cotton strips
R37.90  Inc VAT
Discontinued: MyPiFi GPIO Expander Board (AW 1B2 Mypifi gpio expander)

Expand your GPIO ports by another 16 with this great add on board for the Raspberry Pi! This easy assembly kit from MyPiFi features a plumbed-in MCP23017 IC - It uses two i2c pins (which can be shared with other devices if required) and in exchange gives your Pi another 16 GPIO's! Each I/O pin can be configured as an in input, output or an input with a pullup and the chip can also be configured for interrupts for when an input changes, so you don't need to keep polling it!  You can also set the i2c address for up to 8 unique chips on the same i2c bus, which means you can daisy-chain these IC's to give you up to 128 I/O's!

Note: This comes in kit form, so some soldering assembly is required.


  • MCP23017 IC
  • 16 Port GPIO Expander Board
  • Stackable (Up to 128 I/O's)
  • Configurable I/O's (Input/Ouput/Input w/ Pullup)

Assembly Guide

R89.90  Inc VAT
Discontinued: SONOFF® IP66 Weatherproof Junction box Support Sonoff Basic/RF/Dual/Pow (AW Sonoff junction box)

Sonoff IP66 is a high quality waterproof case that can be used with Sonoff products.
The waterproof level of the waterproof box is IP66. It allows you to remote control your lights or home appliances outdoor.
Just get it to control your Christmas tree lights! Read the detailed installation guide.

Specification for IP66 Waterproof Case:
Waterproof Level: IP66
Body Material: ABS V0
Transparent Cover Material: PC V0
Dimensions: 132.2 x 68.7 x 50.1mm(L*W*H)
Weight: 145.0g
Package includes:
1 x SONOFF® IP66 Waterproof Junction Box
R105.90  Inc VAT
Discontinued: Simple RF M4 Receiver - 315MHz Momentary Type (AW RF receiver 2A2)

These Simple RF receivers are the easiest way possible to add wireless control, painlessly! There's no programming, configuring or addressing - simply power the receiver with 5-10VDC and press the buttons on a matching RF keyfob remote. When the A button is pressed, it activates the first pin, when the B button is pressed, it activates the second one, and so forth for all four buttons. There's no microcontroller required, its just a simple one-to-one link.

These modules make it easy to control your project once its in an enclosure or from across the room, but there are some things to watch out for. One is that they do not have 'addressing' - if you have multiple receivers in a room, they'll all work at the same time with a single remote. Another is that there's no error checking or bi-directional link - that means the remote doesn't know if the module received the message or not. Third, there are a few different types of receivers and each one looks identical but they are actually differently!

  • The M4 momentary type acts like a push button - when the A button is held down, the matching pin goes high. When the A button is released, the matching pin goes low. The pins only go high when a button is pressed
  • The T4 toggle type acts like an alternating toggle switch - when the A button is pressed the first time, the matching pin goes high. When the A button is pressed a second time, the matching pin goes low. The pins are turned on and off by repeated presses
  • The L4 latch type acts like a selector switch - when the A button is pressed the first time, the matching pin goes high. When the B button is pressed it turns A's pin off and turns B's pin on. When C is pressed, it turns B off, etc. Only one is on at a time. If you press the same button twice, it doesn't turn that pin off.

This product is the Momentary M4 type! It only includes the receiver module, you will also need to pick up a keyfob transmitter Each receiver also has a VT pin, which will go high if any of the pins are activated. You can sort of use it as an 'interrupt' indicator.

R99.87  Inc VAT
Discontinued: Raspberry Pi 3 Model B+ 3.5 inch Touchscreen LCD Display + Black 9 layer Acrylic Case for Raspberry Pi 3 B+ (AW touch display layer case)
Introduction :

This is the newest raspberry pi 3 model B+ 3.5 inch touchscreen and case.


1. 9-layer Acrylic Case , well protective , needn't use the screw hole on raspberry pi.
2. 3.5 inch LCD TFT Touch Screen
3. Please remove the protective film sticker on the surface of the acrylic layers.
4. Easy to install
5. Only supports Raspberry Pi 3 Model B+ , not for Raspberry Pi 3 Model B
6. To use this touchsreen , you need to configure the raspberry pi system first.

More info available at https://github.com/goodtft/LCD-show

Image available for download


Package list:
1 x 3.5 inch LCD Touchscreen
1 x 9-layer Acrylic Case  ( not include raspberry pi )
1 x Stylus Pen

Installation help available at https://www.elecrow.com/wiki/index.php?title=3.5_Inch_480x320_TFT_Display_with_Touch_Screen_for_Raspberry_Pi
R459.90  Inc VAT
Discontinued: 10A 250V 3Pin IEC320 C14 red Inlet Switch Male Power Socket (AW kettle red socket switch)

- Material (External): Plastic, Metal
- Button Color: Black/Red
- Rocker Switch Rating Voltage: 10A 250V AC
- Hole in Top Face Diameter : 0.42cm / 0.16"
- Hole Center Distance : 3.9cm / 1.5"
- Bottom Size : 4.7 x 2.7cm / 1.9" x 1.1"(L*W)
- Total Size : 5.8 x 4.8 x 3.4cm / 2.3" x 1.9" x 1.3"(L*W*H)
- Use only with a 250V supply

Package includes:

1 x IEC320 C14 Power Socket With Switch Fuse
R45.39  Inc VAT
Discontinued: Scroll pHAT (AW scroll phat)

Bazinga! Let your Pi talk back with this slick little 11 x 5 LED matrix pHAT.

At the heart of Scroll pHAT is ISSI's IS31FL3730 matrix LED driver chip. It can drive multiple LED matrix and segment display formats and also supports controllable display brightness.

Scroll pHAT has a matrix of 5x11 (55 total) bright white LEDs that is ideal for scrolling messages, showing graphs, and drawing pictures. Use it to output your IP address, show CPU usage, make a scrolling name badge, or play pong or snake!

Goes together great with Enviro pHAT for graphing sensor values.


  • 5x11 (55 total) bright white LEDs
  • Matrix-wide brightness control (although not individual brightness control)
  • IS31FL3730 matrix driver chip
  • Compatible with Raspberry Pi 3, 2, B+, A+, and Zero
  • Python library
  • Female header requires soldering



    Our Scroll pHAT Python library makes controlling it really easy, and there's a veritable smorgasbord of examples including a binary clock, CPU activity readout, Conway's Game of Life, weather displays, and scrolling messages.

    All it takes to scroll text on Scroll pHAT is about a dozen lines of code. Nifty!

    Bazinga! Let your Pi talk back with this slick little 11 x 5 LED matrix pHAT.
    R146.27  Inc VAT
    Discontinued: 3.5 inch Raspberry Pi 3 Model B+ Touchscreen 480x320 LCD Display + Touch Pen + ABS Case Box also for Raspberry Pi 3 Model B (AW 3.5 display black case kit)
    The touch screen connect to Raspberry Pi by GPIO pins only , please don't use the HDMI interface when you use the touch screen.



    Features :


    1. Dual use  :

    1). This case support to install 3.5 inch touchscreen , and need to remove the cover board and fan in this using way. ( You can not install the 3.5 inch screen and fan at the same time )

    2). When you don't use the 3.5 inch touchscreen , it is a general case with cooling fan.


    2. Full access for Raspberry Pi : 

    We leave every hole for SD card , HDMI , AV , Ethernet , USB , POE , Camera , MIPI DSI ports.


    3. Support cooling fan :

    You can install the cooling fan on the cover board , which make the best heat dissipation and extend the using life of Raspberry Pi.  ( You can not install the 3.5 inch screen and fan at the same time )


    4. Mounting holes on the bottom :

    We make 2 holes on the bottom so that you can mount the case on the wall or something or somewhere else . This design is very convenient when using the 3.5 inch touchscreen.


    5. There are Black / Gray / White / Transaperent color to chose for the case. This model is the black case.


    6. About the pad  - use to support the screen

    1). Install the Raspberry Pi on the base board 

    2). Please stick the pad on the back of the 3.5 inch touchscreen ( as the picture shows ) , then insert the 3.5 inch touchscreen on Raspberry Pi by GPIO pin correctly.

    3). Install the cover board


    This touchscreen need the driver , and we provide the system image (Raspbian) by following link:


    1. for Raspberry Pi 3 :



    2. for Raspberry Pi 3 Modle B+ :



    or refer to configure it at this link :



    Manually configure method for Raspbian system:


    This LCD Module need install driver first.

    Step 1:Download the Raspbian IMG


    Step 2: Burn the system image

    If you don't know how to do that,you can refer to the Raspberry Pi official tutorials

    Step 3: Open terminal(SSH) and install the driver on RaspberryPi

    (tested on RaspberryPi 3B+,3B,2B,2B+,1B,ZERO)


    sudo rm -rf LCD-show

    git clone https://github.com/goodtft/LCD-show.git

    chmod -R 755 LCD-show

    cd LCD-show/

    sudo ./LCD35-show

    Wait a few minutes for the system to reboot.




    Package Includes:


    1. LCD with Case

    1 x 3.5 inch Touchscreen ( Raspberry Pi is not included )

    1 x Touch Pen

    1 x ABS Case

     Installation help available at https://www.elecrow.com/wiki/index.php?title=3.5_Inch_480x320_TFT_Display_with_Touch_Screen_for_Raspberry_Pi

    R429.90  Inc VAT
    Discontinued: Genius NX-7000 Red/Black wireless mouse (AW Genius N-X7000 mouse Red)
    .... with a 1200 dpi BlueEye engine NX-7000 is easy to use anywhere, even on a granite countertop, wood table, carpet or sofa. The contoured shape design is suitable for either hand and is comfortable for all-day use. When you are on the go, you can store the receiver in the bottom of the mouse. The universal pico receiver allows to connect to other compatible Genius mouse models.

    - 2.4Ghz wireless mouse
    - 1200 dpi BlueEye sensor for smooth movement control
    - universal USB Pico receiver
    - power switch extends battery life
    - contoured shape great for either hand

    system requirements:
    - Windows 7/8 or above,
    - Mac OSX 10.4+ or above
    - available USB Port

    package content:
    - NX-7000
    - USB Pico receiver
    - AA Alkaline battery
    - quick guide

    - interface: USB
    - RF frequency 2.4GHz
    - three buttons: left, right, middle button with scroll
    - resolution: 1200 dpi BlueEye engine
    - battery: 1x AA

    - dimension: 100x58x39 mm
    - package size: 90x41x132 mm
    - body Weight: 55g
    - pcs./ctn.: 40
    R150.31  Inc VAT
    Discontinued: HiFiBerry DAC+ pro (AW Hifiberry dac+pro)

    The HiFiBerry DAC+ Pro is a high-resolution digital-to-analog converter for the Raspberry Pi Model A+/B+/2B/3B. This is a special sound card for the Raspberry Pi, that is optimized for one specific use: the best audio playback quality on your Raspberry Pi!

    This is the HiFiBerry DAC+ Pro with a pair of RCA jacks. It can be simply plugged onto your Raspberry and does not need any soldering.

    If you need a case for the HiFiBerry DAC+, check out the HighPi Case


    • Dedicated 192kHz/24bit high-quality Burr-Brown DAC for best sound quality (ESS instead of Burr-Brown on DAC+ Light)
    • Hardware volume control. You can control the output volume using “alsamixer” or any application that supports ALSA mixer controls (not available on DAC+ Light)
    • Connects directly to the Raspberry Pi, no additional cables needed
    • No soldering Comes as a pre-fabricated kit. You just plug it onto the Raspberry Pi B+. Mounted in less than a minute.
    • Directly powered from the Raspberry Pi, no additional power supply
    • Ultra-low-noise voltage regulator for optimal audio performance
    • Integrated EEPROM for automatic configuration
    • The board is conforms to the Raspberry Pi hardware-attached-on-top (HAT) specification.
    • Comes with all components required to mount it. We include 4 M2.5x12mm spacers to fix the board onto the Raspberry Pi.

    DAC+ Pro Advanced Features:

    • Gold-plated connectors: Gold-plated RCA connectors ensure optimal connection to your RCA cables.
    • Dual-domain clock circuit: The DAC+ Pro uses its own on-board ultra-low-jitter clock generator. To have the lowest jitter values, there are 2 different clocks on board: one for 44.1/88.2/176.4 kHz sample rates and another for 48/97/192kHz.
    • Hackable: The board can be modified to allow external power supply for the analog part of the board. Also you can connect external I2S DACs. These features need soldering on the board. This will void warranty, but real hardware hackers have no problems with this.
    The HiFiBerry DAC+ Pro is a high-resolution digital-to-analog converter for the Raspberry Pi Model A+/B+/2B/3B.
    R836.27  Inc VAT
    Discontinued: Adafruit Raspberry Pi B+,2,3 model B Case Smoke Base With Clear Top (AW Ada case smoke/clear)
    This enclosure was designed by Mike Doell over at Adafruit - just like their elegant, beautiful, and functional Pi Case for Raspberry Pi Model B.  Made of ultra-durable, super-glossy polycarbonate, it is both good looking and tough enough to toss into your bookbag or toolbox. It has slim openings for all your cables, an easy-to-remove beveled slot for your Micro SD card, slots for both your Pi Camera and upcoming Display, and a space for your GPIO cable to extend out from the Pi.

    The Pi snaps into the base and the lid fits snugly onto the top.  If you want to break out your Pi you can use your case without the lid and add hats to your Pi with ease.

    This case works for the Raspberry Pi Model B+ only.  It does not work for the Raspberry Pi1 Model A or B.

    R160.39  Inc VAT
    Discontinued: SBR12UU Linear Bearing 12mm Open Block Linear Bearing Slide (AW 2D2 12mm slide bearing block)
    SBR12UU 12mm Slide Bearing Block Linear Ball Bearing Block CNC Router

    Model Number: SBR12UU
    Built-in material: Bearing Steel
    External material :Aluminum Alloy
    Bore size:12MM
    Main application: working with SBR series linear rails. 

    Package Includes:
    1 x Slide Bearing Block 
    R99.87  Inc VAT
    Discontinued: 200W Switching Power Supply 170-250V To 5V 40A For LED Strip Light (AW Power 5V 200W)
    Item Name: Switching Power Supply
    Output Voltage: 5V 40A
    Power: 200W
    Input Voltage: 170-250V
    Size: 200 x 110 x 50mm
    Shell Material: Metal case / Aluminum base.
    Main Color:Silver Tone
    Protection: Shortage Protection, Overload Protection, Over Voltage Protection.
    Widely used in Industrial automation, LED display,communications, etc.
    Working Temperature: 0~40℃
    Storage Temperature: -20~60℃
    Ambient Humidity: 0~95% Non-Condensation

    This Power Supply Unit "DOES NOT" come with installation instructions, wiring cables, on/off switch, or screws. Professional installation of a qualified electrician is highly recommended.
    How to calculate Support max LED Strip Length:
    1. Assumption: Your LED Strip has 60LEDs/m
    2. each LED 0.2W
    3. calculate max LED Strip Length: 0.2W/LED ×  60LEDs/m=12W/m
    4. 200W(this listing)÷12W/m=16m
    5. So this unit will support a LED Strip(60LEDs/m, 0.2W/LED) Length (Max)=16m lights

    Package includes :
    1 x Switching Power Supply
    R554.83  Inc VAT
    Discontinued: 2W 5V Solar Panel 80mm x 180mm (AW 2W Solar Panel 80x180)

    This 2W solar panel is made of single-crystal material that performs solar energy transformation at 17% efficiency! It has a clear epoxy resin surface and sturdy hard-board back, which makes it perfect for outdoor environments.

    A 2mm JST connecter is pre-attached to the panel, which makes it perfect to team up with most can-use-solar-power-supply boards, or just pop the connector off, and you have a straight positive/negative wire configuration.

    The typical open circuit voltage is approximately 5V, depending on light intensity, which makes it great for loads of applications! In those bright summer days with clear sky and big sun, the peak voltage can rush up to 10V, so please ensure that anything connected is protected from any spikes in intensity with a voltage regulator. Panels can also be combined to increase output if required!

    The 2W Solar Panel 80 x 180 Features:
    • Dimensions: 180x80x2.5(±0.2) mm
    • Typical voltage: 5.5V
    • Typical current: 360mA
    • Open-circuit voltage: 8.2 V
    • Maximum load voltage: 6.4V
    • Typical Efficiency: 17%
    • Power: 2 Watt
    • Connector: 2.0mm JST
    • Solar Type:156 Two Line
    • PCB Material : Glass fiber
    R160.39  Inc VAT
    Discontinued: 115mm 50W 220V Stainless Steel Water Level Sensor Side Float (AW 2A2 Side float stainless sensor)
    A float switch is a device used to sense the level of liquid within a tank.
    The switch may actuate a pump, an indicator, an alarm, or other device.
    Use it with hydroponics, saltwater tank, freshwater tank, gardening, aquariums, pools, pet bowls, fish tanks, filtration, heating, pumps, ponds, basement alarms, boats, air condition drain pans, pressure washers, carpet cleaning mach, reef aquarium, fluid control, ice machines, coffee pots, marine, automotive, automobiles, tropical fish tanks, evaporator coils, condensation lines or what ever your project may be.

    Color: Silver
    Material: Stainless Steel SUS
    Max Contact Rating: 50W
    Max switching voltage: 220V DC
    Max switching current: 1.5A
    Max breakdown voltage: 300V DC
    Max carry current: 3.0A
    Max contact resistance: 100mΩ
    Max temperature: -30℃ - +125℃
    Thread Dia(Approx): 21mm, 1/2”PT
    Thread Length: 15mm/0.59"
    Switch Total Length: 115mm/4.5"
    Cable Length: 38cm/15" 40cm/15.7"

    Package Includes:
    1x Floating Switch
    R220.92  Inc VAT
    Per Page      141 - 160 of 182