Generic0

Sort By:  
Resistors (3.3K Ohm 5%) (10 pack) (Resistor 3.3K)
These are carbon film axial leaded through hole type and can handle up to 1/4W of power.  1/4W resistors are the most commonly used size for breadboarding, electronics and most common types of hobby projects.

Specifications

  • Power:  up to 1/4W
  • Material:  carbon film 
  • Lead diameter:  0.55 mm
  • Tolerance : 5%
  • Operating Temp :  -55C – 155C

What's in the box?

10 x 3.3K ohm resistors

Resources

Resistors basics
Types of Resistors
Resistor colour codes
R4.90  Inc VAT
12V 7Ah Sealed Lead Acid Battery (12V 7Ah lead/Acid Batt)
Description:

12 Volt 7Ah Lead Acid Battery

Ideal for robotics and hobby related projects.

Specifications:

Housing size: 150mm x 65mm x 100mm
Weight 1982mg

What's in the box?

1 x Lead cell battery
R236.90  Inc VAT
Machifit 8mm Lock Collar for T8 Lead Screw (T8 lock collar)
8mm Lock Collar suitable for T8 lead screw, and made durable to increase efficiency.
The shaft collar is a simple, yet important, machine component found in many power transmission applications, most notably used in CNC and 3D printing Machines. The collars are used as mechanical stops, locating components, and bearing faces. The simple design lends itself to easy installation. 

Specification:
ModelT8
Material
Steel with Zinc-plated finish
Inner diameter8mm
Outer diameter16mm
Width8mm
Quantity1pcs

What's in the box?
1 x T8 Lead Screw Lock Collar
R24.90  Inc VAT
Resistors (1.5 Ohm 5%) (10 pack) (Resistor 1.5)
Description:

These are carbon film axial leaded through hole type and can handle up to 1/4W of power.  1/4W resistors are the most commonly used size for breadboarding, electronics and most common types of hobby projects.

Specifications:

CBT25 Series Resistors
0.25 Watts at 70°C Derating to 0 at 125°C 0.5
Maximum Voltage 250V
Wide Range of Resistance values, 1R0 - 5M6
Great Pulse endurance properties and a range of Resistance Tolerances

Axial - 0.25W/0.5W

AttributeValue
Resistance1.5 Ω
Power Rating0.25W
Tolerance±5%
TechnologyCarbon Composition
SeriesCBT
Temperature Coefficient-700 → 400ppm/°C
Termination StyleAxial
Dimensions2.4 (Dia.) x 6.3mm
Length6.3mm
Diameter2.4mm
Maximum Operating Temperature 125°C
Lead Diameter0.6mm
Maximum Temperature Coefficient 400ppm/°C
Minimum Operating Temperature-55°C
Minimum Temperature Coefficient-700ppm/°C


What's in the box:


10 x 1.5 ohm resistors

R4.90  Inc VAT
5MP Camera IR-CUT 5MP 8 mm Adjustable Focus Night Vision NoIR Camera for Raspberry Pi (adjustable camera)
Raspberry Pi Camera Module, Embedded IR-CUT, Supports Night Vision, Type B

Features

  • Raspberry Pi Camera, supports all revisions of the Pi
  • Embedded removable IR-CUT filter, eliminating color distortion in the daylight
  • Comes with infrared LED, supports night vision
  • 5 megapixel OV5647 sensor
  • Adjustable focus distance
  • Camera specifications
    • CCD size : 1/4inch
    • Aperture (F) : 1.2
    • Focal Length : 8mm
    • Angle of View (diagonal) : 40 degree
    • Sensor best resolution : 1080p
  • 4 screw holes
    • Used for attachment
    • Provides 3.3V power output
    • Supports connecting infrared LED and/or fill flash LED
  • Dimension: 31mm x32mm

What's in the box?

1 x camera

Note: to use the camera with Raspberry Pi Zero / Zero W / Zero WH, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera Cable

Note: the actual image pixels is 5MP, which depends on the sensor, so it doesn't matter that there is a 3MP silk mark on the camera.

Resources

The new Raspberry Pi OS release includes the new Picamera2 Python camera interface.

Wiki : www.waveshare.com/wiki/RPi_IR-CUT_Camera_(B)

R549.90  Inc VAT
Allen Cap Screws H/T M5 x 12mm (10 pack) (M5x12 cap screw black(10))
Standard socket head cap screws (allen cap screws) possess a cylindrical head with a flat, chamfered top surface and a recessed socket drive. The outer sides of the cylindrical cap are commonly knurled.
Cap and machine screws are used to clamp machine parts together, either when one of the parts has a threaded hole or in conjunction with a nut. These screws stretch when tightened, and the tensile load created clamps the parts together.

Specifications

  • Black
  • M5 x 12mm
  • Steel Alloy
  • pack of 10


What's in the box?

10 x Screws
R14.30  Inc VAT
Resistors (22K Ohm 5%) (10 pack) (Resistor 22K)
Pic is for illustration purposes only

These are carbon film axial leaded through hole type and can handle up to 1/4W of power.  1/4W resistors are the most commonly used size for breadboarding, electronics and most common types of hobby projects.

Specifications

  • Power:  up to 1/4W
  • Material:  carbon film 
  • Lead diameter:  0.55 mm
  • Tolerance : 5%
  • Operating Temp :  -55C – 155C

What's in the box?

10 x 22K ohm resistors

Resources

Resistors basics
Types of Resistors
Resistor colour codes
R4.90  Inc VAT
Nylon Slotted screws and spacers M4 x 16 (4 pack) (Nylon M4x16 4pack)
Pic is for illustration purposes only

Nylon is able to fasten to many different kinds of materials, which makes it extremely versatile. Nylon screws can be used with particle board, rubber, metal, wood, and other plastic items.

Specifications

  • M4 x 16 slotted screws and spacers
  • Nylon
  • Ideal for your VESA brackets

What's in the box?

4 x screws M4 x 16
4 x 5mm spacers
Pic is for illustration purposes only
R14.90  Inc VAT
HDMI to Micro HDMI 1m Cable for Pi4/5 and Pi400 (Black micro HDMI cable 1m)
HDMI cable provides a one-cable solution for many of your home entertainment needs. It could be applied to connect your latest mobile phones with micro HDMI interface, like HTC EVO 4G, Motorola Droid X, Nokia N8 and Raspberry Pi 4 to your HDTV. Then you could experience high quality audio and video from your home theater.

Specifications

  • Connector (Pi Interface) – Male Micro HDMI
  • Connector (Display Interface) – Male HDMI
  • Cable Length – 1m
  • Cable Colour  – Black
  • Raspberry Pi Compatibility – Raspberry Pi 4 Model B 1GB / 2GB / 4GB / 8GB / Pi400
  • Weight – 43g

What's in the box?

1 x HDMI to Micro HDMI 1m Cable
R39.90  Inc VAT
Raspberry Pi4 black ABS Case with Cooling Fan and Heat Sinks (Pi4 ABS black case)
This is a new design ABS case to protect your Raspberry Pi 4 Model B computer, it is only compatible with your Raspberry Pi 4 Model B, does not support other versions. Also supports a dc 5v cooling fan.

Features

  • ABS material.
  • Easy to install.
  • All ports and slots of the case match with Raspberry Pi 4 Computer Model B perfectly.
  • Supports a DC 5v extractor cooling fan.
 

What's in the box?

1 x ABS Case for Raspberry Pi 4 Model B
1 x Cooling Fan 30mm x 30mm x 7mm
4 x Heat Sinks(new add on to this case)

Resources


R69.90  Inc VAT
R74.90
Nema 17 SM24240 Two-Phase Stepper Motor (WS Nema 17 motor)
Specifications

  • Category: two-phase stepper motor
  • Step angle: 1.8°
  • Body length: 40mm
  • Rated current: 1.7A/Phase
  • Phase resistance: 2.4Ω
  • Phase inductance: 3.7mH
  • Holding torque: 0.45N.m
  • Rotor inertia: 54(g.c㎡)
  • Weight: 0.3kg
  • Compatible driver: SMD258C, Stepper Motor HAT

Dimensions

Wiring Configuration



Part NumberPhasesStep angle
(degree)
Body length
(mm)
Rated current
(A/Phase)
Phase resistance
(Ω)
Phase inductance
(mH)
Holding torque
(N.m)
Rotor inertia
(g.c㎡)
Weight
(kg)
Compatible driver
SM24240two-phase1.8401.72.403.70.45540.3SMD258C, Stepper Motor HAT
SM25776two-phase1.8763.01.001.61.904801.0SMD258C
SM35778three-phase1.2785.80.290.391.503801.1SMD356C


What's in the box?

1 x Nema 17 SM24240 Two-Phase Stepper Motor

You might want to cool down your stepper motor with a 40x40x11mm heatsink or need a mounting bracket.

Resources

R169.90  Inc VAT
1080p Full-HD USB Webcam with Built-in Microphone (1080p Webcam)

This 1080p Full-HD USB webcam is the perfect add-on if you want to use your Raspberry Pi for video calls using popular services such as Zoom, Skype and Google Hangouts (Google Meet).

This article from Raspberry Pi shows you how to easily use a USB webcam with these popular services, which we've tested ourselves in the office with great results. Combined with the small, light and mobile Raspberry Pi, you can now meet with friends and colleagues in any room in the house!

Simply plug this into your Raspberry Pi's USB port and enjoy high-definition work video calls, chats with friends...or simply take some simple photography or video clips.

The camera has a built-in microphone with noise-cancelling technology for clearly capturing your voice, so no additional audio capture device is necessary. It also features an anti-glare lens and a 360-degree swivel on top of a stable mounting clip which fits on top of desks, laptops and monitors.

Features

  • Model number: A4Tech PK-910H
  • 1080p Full-HD Webcam
  • Still images: Up to 16 Megapixels (4608x3456 software interpolated)
  • Video resolution: Up to 2 Megapixels
  • Frame rate: 30fps
  • Interface: USB 2.0
  • Microphone: Built-in
  • Cord length: 150cm
  • Power rating: 5V 230mA
  • Works with Raspberry Pi, Windows and Mac

What's in the box?

1 x  USB Webcam with Built-in Microphone

Raspberry Pi board not included

R647.45  Inc VAT
R849.90
Low-Profile ICE Tower Cooling Fan for Raspberry Pi 4B/3B /3B Super Heat Dissipation (low ice tower)
Please note: Raspberry Pi not included

Specifications


  • Supported RPi:     Raspberry Pi 4B/3B /3B
  • Power supply:     DC 5V input (can be powered from Raspberry Pi)
  • Structure:     ICE Tower-style, 5mm copper tube super heat dissipation
  • Rated power:     0.4W @5V, 0.08A
  • Fan:     Powerful RGB colorful LED fan (1x transparent fan, 1x spare black fan)



More efficient

Large area cooling fins and directly-contacted copper tube, super heat dissipation
reducing the temperature of the Raspberry Pi from 80℃ to 40℃ while overclocking



Colourful LED fan

Colour LED fan with automatic colour change, make it more dazzling and gorgeous

More silent

Rated power 0.4W @5V, 0.08A, elaborately tuned fan lower noise, higher performance


Easy to setup

Just a few screws and heatsink tape in a few steps




Outline Dimensions(mm)

R429.90  Inc VAT
Spacer Screw Pack (38mm) for Modular Raspberry Pi Case (38mm screws for spacer)
Description

The Modular Raspberry Pi Case is designed to be fully customisable by the user, and adaptable to suit a range of requirements. The streamlined look, and adaptability makes it perfect for many applications, including: the hobbyist maker, digital signage, industrial protection, living-room & child-friendly media centres, classroom eduction, workshops and many more! All add-ons are designed to be interchangeable and can be added and removed when required.

The basic case has a stock internal headroom of 25.70mm, measured from the top of the RPi PCB to the inside of the lid, which allows many Raspberry Pi breakout boards to fit without any modifications. If the user wants to increase this headroom further, to enable the use of larger breakout boards, place protoype PCBs internally, or stack multiple boards on one another, spacers can be utilised. Spacers increase the internal height by 10mm per spacer, and can be stacked to increase the headroom further e.g. 2 spacers would be 20mm extra. Spacers can be stacked as high as needed, however longer screws are required if the case needs to be secured.

10mm Stackable Spacers Features:

  • Makes Your Case Compatible with 99% of Breakout Boards
  • Spacers Raise Internal Height by 10mm Enabling the Case to Grow with your Project
  • Spacers can be Stacked Increasing Internal Height by up to 50mm or more!
  • Great for Embedded Applications, and Hobbyist Projects

Screw Size Guide

Depending on the number of spacers required, the length of the screw required will change. We currently cater for up to 5 spacers with corresponding screw lengths. Screws types compatible with spacers plates are both No.4 (US) and M3 (UK/EU). Users can of course, source screws via their own channels, or alternatively screws up to 58mm are available from ModMyPi in packs of four.

Spacers - Screw length required(mm)

0 - 28mm (included with case)
1 - 38mm
2 - 48mm
3 - 58mm
4 - 68mm


R5.90  Inc VAT
Raspberry Pi Compute Module 4 Antenna Kit (CM4 antenna kit)
Certified for use with Raspberry Pi Compute Module 4

Specifications

  • FREQUENCY RANGE    2400-2500/5150-5850 MHz    
  • MAXIMUM POWER    10 W
  • BANDWIDTH    100–700 MHz    
  • DIMENSIONS    109 × 10 mm
  • VSWR    ≤1.92    
  • CONNECTOR    SMA male central pin
  • PEAK GAIN    2±0.5 dBi    
  • BODY MATERIAL    TPEE
  • OUTPUT IMPEDANCE    50 Ω    
  • OPERATING VOLTAGE    -20˚C ~ + 70˚C
  • POLARISATION    Vertical  
  • RADIATION    Omnidirectional

What's in the box?

1 x CM4 Antenna kit

Resources



R52.90  Inc VAT
Spacer Screw Pack (48mm) for Modular Raspberry Pi Case (48mm screws for spacer)
Description

The Modular Raspberry Pi Case is designed to be fully customisable by the user, and adaptable to suit a range of requirements. The streamlined look, and adaptability makes it perfect for many applications, including: the hobbyist maker, digital signage, industrial protection, living-room & child-friendly media centres, classroom eduction, workshops and many more! All add-ons are designed to be interchangeable and can be added and removed when required.

The basic case has a stock internal headroom of 25.70mm, measured from the top of the RPi PCB to the inside of the lid, which allows many Raspberry Pi breakout boards to fit without any modifications. If the user wants to increase this headroom further, to enable the use of larger breakout boards, place protoype PCBs internally, or stack multiple boards on one another, spacers can be utilised. Spacers increase the internal height by 10mm per spacer, and can be stacked to increase the headroom further e.g. 2 spacers would be 20mm extra. Spacers can be stacked as high as needed, however longer screws are required if the case needs to be secured.

10mm Stackable Spacers Features:

  • Makes Your Case Compatible with 99% of Breakout Boards
  • Spacers Raise Internal Height by 10mm Enabling the Case to Grow with your Project
  • Spacers can be Stacked Increasing Internal Height by up to 50mm or more!
  • Great for Embedded Applications, and Hobbyist Projects

Screw Size Guide

Depending on the number of spacers required, the length of the screw required will change. We currently cater for up to 5 spacers with corresponding screw lengths. Screws types compatible with spacers plates are both No.4 (US) and M3 (UK/EU). Users can of course, source screws via their own channels, or alternatively screws up to 58mm are available from ModMyPi in packs of four.

Spacers - Screw length required(mm)

0 - 28mm (included with case)
1 - 38mm
2 - 48mm
3 - 58mm
4 - 68mm


R5.90  Inc VAT
Spacer Screw Pack (58mm) for Modular Raspberry Pi Case (58mm screws for spacer)
Description

The Modular Raspberry Pi Case is designed to be fully customisable by the user, and adaptable to suit a range of requirements. The streamlined look, and adaptability makes it perfect for many applications, including: the hobbyist maker, digital signage, industrial protection, living-room & child-friendly media centres, classroom eduction, workshops and many more! All add-ons are designed to be interchangeable and can be added and removed when required.

The basic case has a stock internal headroom of 25.70mm, measured from the top of the RPi PCB to the inside of the lid, which allows many Raspberry Pi breakout boards to fit without any modifications. If the user wants to increase this headroom further, to enable the use of larger breakout boards, place protoype PCBs internally, or stack multiple boards on one another, spacers can be utilised. Spacers increase the internal height by 10mm per spacer, and can be stacked to increase the headroom further e.g. 2 spacers would be 20mm extra. Spacers can be stacked as high as needed, however longer screws are required if the case needs to be secured.

10mm Stackable Spacers Features:

  • Makes Your Case Compatible with 99% of Breakout Boards
  • Spacers Raise Internal Height by 10mm Enabling the Case to Grow with your Project
  • Spacers can be Stacked Increasing Internal Height by up to 50mm or more!
  • Great for Embedded Applications, and Hobbyist Projects

Screw Size Guide

Depending on the number of spacers required, the length of the screw required will change. We currently cater for up to 5 spacers with corresponding screw lengths. Screws types compatible with spacers plates are both No.4 (US) and M3 (UK/EU). Users can of course, source screws via their own channels, or alternatively screws up to 58mm are available from ModMyPi in packs of four.

Spacers - Screw length required(mm)

0 - 28mm (included with case)
1 - 38mm
2 - 48mm
3 - 58mm
4 - 68mm


R5.90  Inc VAT
Coin CR2450 Lithium Battery for Sonoff Zigbee range (Zigbee CR2450 coin battery)

 Coin CR2450 Lithium Battery

  • Lithium coin cells are used in watches, cameras, and computer memory applications
  • For use with the Sonoff Zigbee range
  • Dimensions 24mm x 5.0mm


What's in the box?

1 x CR2450 coin battery
R36.90  Inc VAT
Power Supply EU 5V 4A for Jetson Nano (jetson power supply 5V4A)
Power Supply, 5V/4A, DC Jack Suit for Nano

Features

  • DC jack output: OD 5.5mm, ID 2.1mm
  • Choice of Plugs: Available in US / EU / UK
  • Connector: DC Jack 5.5mm/2.1mm
  • Cable Length: 1.2m
  • Input: AC 100~240V 0.8A
  • Output: DC 5V 4A
  • Protection: Short circuit / Over voltage / Over current
  • Lifetime: ~60,000 hours
  • Safety Certifications: UL / FCC / CE / GS / SAA / RCM
  • Environmental: ROHS Compliant

What's in the box?

1 x Power Supply EU 5V 4A for Jetson Nano

You will also need a euro plug adapter
R169.90  Inc VAT
6mm solar cable Black per meter (Solar cable 6mm Black/m)
Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of –40oC to 90oC. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable.

H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION

    Conductor          Flexible tinned copper (Class 5)
    Insulation           Halogen-free cross-linked compound
    Outersheath      Halogen-free cross-linked flame retardant compound

 

The compounds used in these solar cable’s insulation and outersheath are halogen free cross-linked, hence the reference to these cables as “cross-linked solar power cables”. The EN50618 standard sheathing has a thicker wall than the PV1-F cable version.

As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.

What's in the box?

6mm Solar Cable per meter as ordered
R24.90  Inc VAT
Per Page      41 - 60 of 161