Generic

Sort By:  
Pic is for illustration purposes only
R14.90  Inc VAT
R23.00  Inc VAT
R9.90  Inc VAT
R189.90  Inc VAT
R599.90  Inc VAT
R1,175.22  Inc VAT
R79.90  Inc VAT
Coming Soon. Login and add this item to your wishlist to be notified when stock arrives. Pricing is estimated at this stage
R89.90  Inc VAT
Nylon Slotted screws and spacers M4 x 16 (4 pack) (Nylon M4x16 4pack)
Pic is for illustration purposes only
Description:

Nylon is able to fasten to many different kinds of materials, which makes it extremely versatile. Nylon screws can be used with particle board, rubber, metal, wood, and other plastic items.

Specifications:

  • M4 x 16 slotted screws and spacers
  • Nylon
  • Ideal for your VESA brackets

What's in the box:

4 x screws M4 x 16
4 x 5mm spacers
Pic is for illustration purposes only
R14.90  Inc VAT
100K ohm 100cm NTC Thermistors with cable for Reprap Mend glass sealed thermistor 3950 Resistant hotend sensor (thermistor cable)
Description

(1) Electrical characteristics
A: Resistance value: R(25°C)=100K±1%
B: B Value: B=3950±1% (calculated from resistance value at 25°C and 50C)
C: Insulation resistance 50MΩ or over by DC500V megger (between glass and lead wire)
(2) Thermal time constant (τ): τ≤10~17s (in still air)
(3) Thermal dissipation constant (δ): δ=1.1~1.6mW/°C (in still air)
(4) Operating temperature range:-50~+260°C
 
Package Includes:
1 x  NTC Thermistor with cable
R42.90  Inc VAT
DC 5V WCS1800 Hall Current Detection Sensor Module 35A Precise With Overcurrent Signal LED (WCS1800 Hall Current)
Description:

The WCS1800 Hall Current sensor has two functions

  • current detection
  • over current protection (can be preset from 0.5A to 35.0A)

Features:

Operating voltage: DC 5V
Current detection range: DC +-35A, AC 25A
Linearity: K=60mV/A
Limit current range: 0.5A to 35A(for on/off value output)
Over current signal indicator LED
Sampling current conversion analog voltage signal output and it can connect ADC; TTL level signal output and it can connect MCU IO port control
Board size 37mm x 31mm
Working temperature: 25 to 85C

Interface



VCC: power positive
DOUT: TLL high/low level signal output
GND: power negative
AOUT: sampling current signal conversion voltage output port

Analog voltage signal output (AOUT)

Relationship between detection current and analog signal output is shown below:

Analog signal output: V0=Vcc*0.5±la*K (la is actual current through current detection pin, and K is linearity)

Eg: Input current is 1A, Vcc=5V and WS1800 linearity is 60mV/A
  1. When the current flows in from positive direction: V0=Vcc*0.5+la*K, V0=(2.5+0.06)V=2.56V
  2. When the current flows in from negative direction: V0=Vcc*0.5-la*K, V0=(2.5-0.06)V=2.44V
  3. If it is an AC signal: V0=Vcc*0.5+la*K, V0=(2.5+0.06)V=2.56V

The above are ideal values. There might be some precision errors.

On/Off output(DOUT)

  1. Make sure the current flows in from the positive direction. Adjust to the desired current warning level.
  2. LED will be on when current is below the setting and DOUT will be low.
  3. When the detected current is higher than your setting, the LED will turn off and the DOUT pin will go high.

Package Includes:

1 x WCS1800 Hall current detection sensor
R219.90  Inc VAT
Machifit SHF8 Horizontal Linear Rail/Shaft Support for CNC (AW SHF8 Rail/Shaft Support)
Specification:
Type: SHF8
Shaft Dimension: 8mm
Material : Aluminum Alloy
Uasge: used for supporting the two sides on a linear rail/shaft.
 
Package Included:
1 x Linear Rail Shaft Support 
R34.90  Inc VAT
130 Size Motor Bracket (130 dc motor bracket)
Description:

Mount it low, mount it high, mount it on your leg, or mount it in the sky! This bracket is for a 130 Size DC Motor and allows you to mount it almost anywhere!

The bracket is designed to clamp around the outside of the motor, and then be screwed or bolted to your desired location using the four M2.5 mounting holes.

What's in the box?:

1 x Motor Bracket

R23.00  Inc VAT
30mm fan grill cover (30mm fan grill)

Description:

Metal fan covers should be installed when using cooling fans. Metal fan grill guards supply a ideal protection cover for any 30mm fans. Protect your fan blades and the item they are cooling.

Features:

  • Type: Fan Grill
  • Size: 30mm x 30mm
  • Material: Metal
  • Use for: 3007/3010 Fan
  • Weight: 3g/pcs


What's in the box:

1 x fan grid cover
R9.90  Inc VAT
USB micro-B to USB-C adapter for Pi4 White (Pi4 USB micro to C white adapter)


This small adapter allows you to convert an existing micro USB power supply (like the official Raspberry Pi universal power supply for Raspberry Pi 1, 2 and 3) into a USB-C power supply.

Note that when a micro USB power supply is used, the maximum power that can be delivered to the Raspberry Pi 4 will be 12.5W. This means that less power will be available to devices connected to the USB 2.0 and USB 3.0 ports on the Raspberry Pi 4 than when using the new Raspberry Pi 15.3W USB-C power supply.

R16.90  Inc VAT
Babbage Bear (Babbage bear)
Description:

He's here! Meet Babbage Bear the Official Mascot of the Raspberry Pi World.

Babbage is a lovely little chap (20cm tall) - he's made from piled fabric (he's so soft and fuzzy, ooh!) with loving eyes and a delicately stitched nose. He even sports his very own Raspberry Pi logo t-shirt!

His duties* include (but are not limited to):
  • Protecting you from magic blue smoke.
  • Last minute inspiration / guidance.
  • Making children smile.
  • Previously was CEO of a Fortune 250 company.
* Effectiveness not guaranteed, he's only a little bear...
R189.90  Inc VAT
4 Channel Infrared Obstacle Avoidance Sensor Module Red (4 sensor infrared kit)
Description:

This 4 channel Infrared Obstacle Avoidance Proximity Sensors Module supports 4 IR transmitter and IR receiver pairs that sends out IR energy to look for obtracles ahead.

Specifications:
 
  • Working voltage: DC 3.3V-5V
  • Working current: try to use more than 1A power supply
  • Working temperature: -10 °C - 50 °C
  • Mounting: M3 screw
  • Detection distance: 1mm to 60 CM is adjustable, the closer the distance is, the more stable the performance is, and the white reflection distance is the furthest.
  • Size: Central control board 4.4mm × 4.0mm × 12mm, small board 25mm × 12mm × 12mm
  • Output interface: 6-wire interface (1234 is 4 signal output, is positive power, - is negative power(ground)
  • Output signal: TTL level (can be directly connected to the I/O number of the single-chip microcomputer. When the infrared light reflected from the sensor is sensed, the red indicator light is on and the output level is low; when there is no infrared light, the indicator light is off and the output is level is high.)
 
Application:
 
  1. Smart car or robot hunt (including black and white lines), along the black line path, also known as tracing.
  2. The smart car avoids the cliff and prevents falling.
  3. Smart car avoids obstacles
 
Package includes:
 
1 x Main Board
4 x IR boards
1 x DuPont lines set
R69.00  Inc VAT
1080p Full-HD USB Webcam with Built-in Microphone (1080p Webcam)
Description

This 1080p Full-HD USB webcam is the perfect add-on if you want to use your Raspberry Pi for video calls using popular services such as Zoom, Skype and Google Hangouts (Google Meet).

This article from Raspberry Pi shows you how to easily use a USB webcam with these popular services, which we've tested ourselves in the office with great results. Combined with the small, light and mobile Raspberry Pi, you can now meet with friends and colleagues in any room in the house!

Simply plug this into your Raspberry Pi's USB port and enjoy high-definition work video calls, chats with friends...or simply take some simple photography or video clips.

The camera has a built-in microphone with noise-cancelling technology for clearly capturing your voice, so no additional audio capture device is necessary. It also features an anti-glare lens and a 360-degree swivel on top of a stable mounting clip which fits on top of desks, laptops and monitors.

Features

  • Model number: A4Tech PK-910H
  • 1080p Full-HD Webcam
  • Still images: Up to 16 Megapixels (4608x3456 software interpolated)
  • Video resolution: Up to 2 Megapixels
  • Frame rate: 30fps
  • Interface: USB 2.0
  • Microphone: Built-in
  • Cord length: 150cm
  • Power rating: 5V 230mA
  • Works with Raspberry Pi, Windows and Mac

Raspberry Pi board not included

R699.90  Inc VAT
3A Raspberry Pi4 Power Cable USB Type C Female to USB Type C Male with Switch White (switch F2M USB C white)
Description:

Great for adding a power switch to your Raspberry Pi without any modifications required to your Pi or your power cable.

Specifications :


1. Interface : USB Type C Female to USB Type C Male
2. Current : 3A
3. Length : 270mm approx
4. Weight : 34g approx
5. Use for : Raspberry Pi 4
6. With ON/OFF switch button , so that you can power on and off the Raspberry Pi conveniently.
7. Colour: White

Package Includes :

1 x USB Type C Power Cable with switch
R53.90  Inc VAT
One Side Copper Clad 100x150x0.8mm PCB Board (Copper PCB 100x150)
Description:

Is it time to try your hand at making your own prototyping board? One Side Copper Clad are one of the most commonly produced boards as they are very simple to use.

Specifications: 
  • Panel Size: 100x150x0.8mm
  • Thickness: 0.8mm
  • Layers: Single Sided
  • Operating Temperature: Up to 140 °C or 285°F

Package includes: 
1 x One-Sided Copper Clad PCB Board

Resources:
Introduction to soldering
Video: How to solder properly
The secrets to good soldering
R19.90  Inc VAT
Kenton 2A USB A to Type C Fast Charging Data Cable white (Kenton Type C power white cable)

Specifications:

Brand: Bakeey
Colour: white
Cable Length: 1m
Cable Plug: USB Type C to USB A
Product Weight: 20g
 
Technical Parameters:
Wire Core: Copper
Wire Material: PVC
Cable Current: 5V-3A max

Package  Includes:
1 x Bakeey 3A Type C USB Fast Charging Data Cable
R69.90  Inc VAT
SA Filament PLA Red (1.75mm) 1Kg (SAfilament Red PLA)

PLA 3D printer filament (Polylactic acid)  is a biodegradable and bioactive thermoplastic  aliphatic polyester derived from renewable resources.

Specification

Print temp :190 - 220 degrees 

Heated Bed :- 0 - 60 degrees 

Speed range : 50 - 80mm/s optimal

Printability : Easy

Net Weight: 1kg


What's in the box ?
1 x SA Filament PLA Black (1.75mm)

R275.00  Inc VAT
Kenton 2A USB A to Type C Fast Charging Data Cable black (Type C cable black 2A)

Description:

These cables are fast charging because of the quality of the cable. But more importantly the length and thickness. If these are properly adjusted to maintain low resistance then we get most out of that cable.

Specifications:

Brand: Kenton
Colour: Black
Cable Length: 1m
Cable Plug: USB Type C to USB A
 
Technical Parameters:
Wire Core: Copper
Wire Material: PVC
Cable Current: 5V 2A max

Package  Includes:
1 x 2A Type C USB Fast Charging Data Cable
R99.90  Inc VAT
DIY Robot Tank Chassis (tank chassis)
Description:

This is a great entry-level chassis to get started building your own robots with. This tank chassis is a bit larger than an Arduino Mega and can be used with any microcontroller. Great for building robots with lots of sensors and even multiple controllers. It is already assembled and can simply be mounted with whatever you need to control your robot!

Features:

  • Motor Voltage: 3V~7.4V
  • Color: Black
  • Material: Plastic
  • Size: 225x95x45mm


Package includes:


1 x Robot Tank Chassis

Resources:

Read the Docs
R599.90  Inc VAT
X200 EXPANSION BOARD (AW X200 EXPANSION BOARD)

Description:

The expansion board is directly connected on top of the Raspberry Pi using the board GPIO header pins, and no wiring nor soldering is required, and duplicated the 40-pin header of the R-Pi in order to support existing expansion boards. X200 is fully compatible with Raspberry Pi Model B and Pi2 model B.

The company emphasizes that their HDMI to VGA converter is not powered by the R-Pi HDMI port, as this is known to cause issues. You can find more information, including instructions to build the RTC drivers and control the servo with WiringPi, on the company’s Raspberry Pi page.

Features:

Input Voltage – 6V to 21Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi.
VGA output – HDMI to VGA converter supporting up to UXGA (1600×1200) and 1080p with 10-bit DAC
Audio – 3.5mm MIC in jack, 3.5mm stereo audio jack, SPDIF output, audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2)
Wireless - WiFi (IEEE 802.11b/g/n) with antenna, IR sensor (38KHz)
USB – self-powered USB hub with 3 ports
RTC – Based on DS3231SN with included CR2032 battery
Servo support – 8-channel Darlington driver chip  (ULN2803) allowing to control electronic circuits which require more current.
I/Os – Power output connector, headers to access camera connector on top of the Raspberry Pi
Misc – DIP switch to remove connection from RPi’s pin header
Dimensions – 85 x 56mm (Same size as Raspberry Pi)

Read more : 
http://www.suptronics.com/Xseries/x200.html 

Package includes:

1 x Supstronics X200 Multifunction Expansion Board
1 x Case
R1,175.22  Inc VAT
GY-BNO055 9DOF 9-axis BNO055 Sensor (9 axis sensor)
Description:
 
Bosch Sensortec BNO055 Intelligent 9-Axis Absolute Orientation Sensor is a System in Package (SiP), integrating a triaxial 14-bit accelerometer, a triaxial 16-bit gyroscope with a range of ±2000 degrees per second, a triaxial geomagnetic sensor and a 32-bit ARM Cortex M0 microcontroller running Bosch Sensortec sensor fusion software, in a single package. The corresponding chip-sets are integrated into one single 28-pin LGA 3.8mm x 5.2mm x 1.1mm housing. For optimum system integration the BNO055 is equipped with digital bidirectional I2C and UART interfaces. The I2C interface can be programmed to run with the HID-I2C protocol turning the BNO055 into a plug-and-play sensor hub solution for devices.

Features:
 
Module Model: GY-BNO055
Use the chip: BNO-055
Power supply: 3-5v (internal low voltage regulator)
Communication method: standard IIC / serial communication protocol
Module size: 12mm x 20mm
 

Package Includes:

1 x BNO055 Sensor Module

Usage:

Adafruit learning

Change -> bno = BNO055.BNO055(serial_port='/dev/ttyAMA0', rst=18)

To -> sensor = adafruit_bno055.BNO055(rst=17, address=0x60) # the address obtained with i2cdetect -y 1

R349.90  Inc VAT
150mm Long Nose Pliers (150mm Long Nose Pliers)

Description:

These 6" Long Nose Pliers are an excellent addition to your Raspberry Pi project toolkit. The extra long nose of these pliers is perfect for getting at those little components!

Strong, accurate and comfortable with a matted grip - a good 'all-rounder' and excellent for squeezing, bending and shaping anything!

Features

  • Drop forged, heat treated fully polished steel
  • Long Nose Pliers with a Matted (Rubber Feel) handle for a comfortable grip.
  • Serrated Jaw for Extra Grip
  • Integrated Wire Cutters 
  • Length - 150mm (6'')
R79.90  Inc VAT
Raspberry Pi Compute Module 4 Antenna Kit (CM4 antenna kit)
Description:

Certified for use with Raspberry Pi Compute Module 4

Antenna specification

  • Frequency range: 2400-2500/5100-5800 MHz
  • Bandwidth: 100–700MHz
  • VSWR: ≤ 2.0
  • Gain: 2 dBi
  • Impedance: 50 ohm
  • Polarisation: Vertical
  • Radiation: Omnidirectional
  • Maximum power: 10W
  • Antenna dimensions: 108 mm × 10 mm

Documents

Compliance

The Raspberry Pi Compute Module 4 Antenna Kit has undergone extensive compliance testing and meets the standards required in many countries. You can find all compliance information and regional certificates at raspberrypi.org/compliance.

Coming Soon. Login and add this item to your wishlist to be notified when stock arrives. Pricing is estimated at this stage
R89.90  Inc VAT
Per Page      21 - 40 of 40