Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
Please note: Pic is for illustration purposes only
R4.90  Inc VAT
R109.90  Inc VAT
This is the Raspberry Pi400 keyboard only. You will need a Power Supply, micro SD, micro HDMI Cable, Display and mouse as well. All of these items are available in kit form as well. See related products
R1,299.90  Inc VAT
R1,379.90
Official Black 2m Micro-HDMI to Standard HDMI for Pi4 and Pi400 (Pi4 off Black 2m micro HDMI cable)


Description

Official Raspberry Pi Micro HDMI to HDMI cable, fully licensed by Raspberry Pi and manufactured for the Raspberry Pi 4 Model B and RPi400.

Perfect for running a dual screen setup.

Specifications

  • 19-pin HDMI Type D(M) to 19-pin HDMI Type A(M)
  • 2m black cable
  • Nickel-plated plugs
  • 4Kp60 compliant
  • RoHS compliant
  • 3Mohm 300VDC insulation, withstands 300VDC for 0.1s

What's in the box?

1 x 2m black micro HDMI cable
R139.90  Inc VAT
Solderless 400 Point Breadboard (breadboard 400)
Description:

400 Point solderless breadboard. Perfect for solderless electronic projects.

Specifications:
  • 400 tie points total: 300 tie-point IC-circuit area plus two 50 tie-point distribution strips providing 4 power rails.
  • White ABS plastic body with black printed legend.
  • Color legend on distribution strips.
  • Size: 3.3 x 2.1 x 0.3in (84 x 54.3 x 8.5mm).
  • Peelable adhesive tape backing provided for attaching to a surface.
Contents:
  • 1 x 400 Point Breadboard
Resources:
R22.90  Inc VAT
Piezo Transducer - Mini 5V Buzzer (4000Hz) (buzzer pcb 5V)
Description:

If you want to add beeps, tones or alerts to your Raspberry Pi project, you require a Piezo Buzzer! This mini transducer is small but loud, and can be driven with a 1-6V peak-to-peak square wave. To use, connect one pin to ground (either one) and the other pin to a square wave out from a timer or microcontroller. For the loudest tones, stay around 4 KHz. For extra loudness, you can connect both pins to a microcontroller and swap which pin is high or low ('differential drive') for double the volume.

This one plops perfectly into a breadboard and has short legs, so can also easily be mounted on a PCB!

Please Note. This item is externally driven, e.g. requires a microcontroller to produce a tone.

Specifications:>

This Mini Piezo Transducer Features:

  •     Mini 5V Piezo Transducer
  •     PCB & Breadboard Mountable
  •     Low Power Consumption
  •     Sealed Base
  •     Wave Solderable and Washable

 Technical Specification:

  •     Rated Voltage (Vp-p Square Wave) 5Vp-p
  •     Operating Voltage 1 to 20Vp-p
  •     Rated Current at Rated Voltage 1mA
  •     Sound Output at 4000Hz at 10cm, at Rated Voltage ≥80dB
  •     Resonant Frequency 4000 ±500Hz
  •     Operating Temperature -20 to 70°C
  •     Storage Temperature -30 to 80°C
  •     External Diameter: 13.8mm
  •     External Height: 6.8mm
  •     Capacitance: 0.013µF
  •     Capacitance Max: 16.9nF
  •     Weight: 1g
  •     Model No.: ABT-402-RC
Contents:
  • 1 x Mini 5V Buzzer
Resources:
  • Using a Buzzer with a Raspberry Pi
R4.90  Inc VAT
1N4007 Rectifier Diode 1000V 1A (5 pack) (1N4007 Diode 1A(5 pack))
Please note: Pic is for illustration purposes only

Description:

The 1N4007 is used as a general-purpose diode. It is normally constructed to be used as a rectifier in the power supply section of electronic devices to convert AC voltage to DC voltage with other filter capacitors.

Specifications:

  • 1N4007 Diode
  • rectifying
  • standard 1A 1000V
  • DO-41
What's in the box:

Pack of 5 units
 
Resources:

Intoduction
Basics, Types, Characteristics, Applications & Packages
Please note: Pic is for illustration purposes only
R4.90  Inc VAT
1N4001 Rectifier Diode 50V 1A (10 pack) (1N4001 Diode 1A(10))
Please note: Pic is for illustration purposes only
Description:

The 1N400x (or 1N4001 or 1N4000) series is a family of popular one-ampere general-purpose silicon rectifier diodes commonly used in AC adapters for common household appliances. Its blocking voltage varies from 50 volts (1N4001) to 1000 volts (1N4007). 

Specifications:

  • Average forward current is 1A.
  • Non-repetitive peak current is 30A.
  • Reverse current is 5uA.
  • RMS reverse voltage is 35V.
  • Peak repetitive Reverse voltage is 50V.
  • DO-41 Package.

What's in the box?:

10 x diodes

Resources:

Intoduction
Basics, Types, Characteristics, Applications & Packages
R9.90  Inc VAT
Machifit 24V NEMA17 Stepper Motor with 400mm T8 Lead Screw Mounted Ball Bearing and Shaft Coupling (24V stepper with T8 screw and nut)

Specifications:
Lead screw 
Materialstainless steel
Diameter8mm
Pitch2mm
Lead4
Total Length400mm
Screw nut 
Materialbrass
Diameter
8mm
Pitch2mm
Lead4
Mounted ball bearing 
Materialzinc alloy
Bore diameter8 mm8mm
Total length55mm
Height29mm
Shaft coupling 
Materialaluminium
Shaft6.35 x 8 mm
Length25 mm
Diameter20mm
Motor 
Voltage24V
Step angle1.8°
Accuracy of step angle ±5%
Accuracy of resistance±10%
Accuracy of inductance±20%
Insulation resistance100mΩmin 500VDC
Radial clearance0.02Max
Axial clearance0.08Max
Radial maximum tolerance28N
Axial maximum tolerance10N
 
Features:
3D printer T8 400mm Stainless Steel Lead Screw Screw nut Mounted ball bearing Shaft coupling Motor.
Screw mainly use for Stepping motor driving guide rail,machine tool, and other equipment.
Screw without processing, direct connected to bearing.
T shape design, make of high quality stainless steel material.
Easy to install and convenient to use.
Fine producing and practical.
Suitable for Industrial automation equipment, stepper motor rails;
Fit for 3D printer; engraving machine; XYZ module; slider; lifts ect.

How to install:
1. Put screw nut into the lead screw.
2. Then the 2 Mounted ball bearing separately install at both ends of the Lead screw.
3. According to the size of you need to adjust the distance between the nut and Mounted ball bearing.
4. Put shaft coupling into the Lead screw beside the Mounted ball bearing.
 
Package Includes:
1 x 400mm Lead screw
1 x Screw nut
2 x Mounted ball bearing
1 x Shaft coupling
1 x Motor
R729.90  Inc VAT
T8 400mm Lead Screw Set with Shaft Coupling and Mounted Ball Bearing (T8 400mm Lead Screw Set)
Description:

These are 4 start 8mm pitch leadscrews with a 200 steps per revolution motor and the 16x microstepping on most common 3D printers. This adds up to 400 steps per mm 3200 steps/ 8mm per rev = 400 steps /mm the same as most 3d Printer lead screws use.

Specifications:


Lead screw 
Materialstainless steel
Diameter8mm
Lead
2mm
Total Length
500mm
Screw nut 
Material:brass
Diameter8mm
Mounted ball bearing 
Materialzinc alloy
Bore diameter5mm
Hole diameter
8mm
Total length55mm
Height29mm
Shaft coupling 
Materialaluminium
Shaft6.35 x 8mm
Length24mm
Diameter18mm
Quantity1 set ( 1 screw 1 Screw nut 2 Mounted ball bearing 1 shaft coupling)

Features:
  • Screw mainly used in stepper motors, machine tools, and other CNC equipment.
  • Screw directly connected to bearing.
  • Suitable for Industrial automation equipment, stepper motor rails, 3D printers, engraving machines, XYZ modules, slider, lifts etc.

How to install:

1. Put screw nut onto the Lead screw.
2.Then the 2 Mounted ball bearing separately, install at both ends of the Lead screw.
3. According to the size of you need to adjust the distance between the nut and Mounted ball bearing.
4. Put shaft coupling into the Lead screw beside the Mounted ball bearing.
 
Package Includes:

1 x Lead screw
1 x Screw nut
2 x Mounted ball bearings
1 x Shaft coupler
R499.90  Inc VAT
Official White 2m Micro-HDMI to Standard HDMI (type A) for Pi4 and Pi400 (Pi4 off White 2m micro HDMI cable)


Description

Official Raspberry Pi Micro HDMI to HDMI cable, fully licensed by Raspberry Pi and manufactured for the Raspberry Pi 4 Model B and RPi400

Perfect for running a dual screen setup.

Specifications

  • 19-pin HDMI Type D(M) to 19-pin HDMI Type A(M)
  • 2m white cable
  • Nickel-plated plugs
  • 4Kp60 compliant
  • RoHS compliant
  • 3Mohm 300VDC insulation, withstands 300VDC for 0.1s
What's in the box?

1 x 2m micro white hdmi cable
R139.90  Inc VAT
Official Black 1m Micro-HDMI to Standard HDMI for Pi4 and Pi400 (Pi4 off Black 1m micro HDMI cable)


Description:

Official Raspberry Pi Micro HDMI to HDMI cable, fully licensed by Raspberry Pi and manufactured for the Raspberry Pi 4 Model B and Pi400.

Perfect for running a dual screen setup.

Specifications:

  • 19-pin HDMI Type D(M) to 19-pin HDMI Type A(M)
  • 1m black cable
  • Nickel-plated plugs
  • 4Kp60 compliant
  • RoHS compliant
  • 3Mohm 300VDC insulation, withstands 300VDC for 0.1s
R89.90  Inc VAT
7.9inch Capacitive Touch Screen LCD 400×1280 HDMI IPS Toughened Glass Cover (WS long display)
7.9" HDMI Touch Display



Device & System Support

Raspberry Pi
Supports Raspbian, 5-points touch, driver free
Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free
Supports Retropie, driver free
Supports all versions of Raspberry Pi


Jetson Nano
Supports Ubuntu, single point touch, driver free

PC
Supports Windows 10 / 8.1 / 8 / 7, 5-points touch, driver free

Connection Examples

Raspberry Pi 3/4




Raspberry Pi ZERO W/WH



Jestson Nano



Mini PC



Appearance and Dimensions


Resources & Services

R1,449.90  Inc VAT
Official Raspberry Pi 400 Desktop kit with Official US keyboard, Official Mouse, Official EU power supply, Official HDMI cable and Raspberry Pi Beginners Guide (Pi400 desktop kit US EU)
Description:


Raspberry Pi 400 is a complete Raspberry Pi 4-based personal computer, fully integrated into a keyboard for ease of setup and use.




What is in this box?

  • The Raspberry Pi 400 with US keyboard
  • The Official Raspberry Pi 3A USB type C Power Supply
  • The Official Raspberry Pi micro USB to USB 1m HDMI cable
  • The Official Raspberry Pi Beginner's Guide
  • The Official Raspberry Pi Red/White USB mouse
  • Sandisk uSD with Raspberry Pi OS pre-installed





Overview


Featuring a quad-core 64-bit processor, wireless networking, dual-display output and 4K video playback, Raspberry Pi 400 is a complete personal computer, built into a compact keyboard.

Raspberry Pi 400 is ideal for surfing the web, creating and editing documents, watching videos, and learning to program using the Raspberry Pi OS desktop environment.

Raspberry Pi 400 is available in a number of different regional variants and as either a computer kit, containing everything you need to get started (except for a TV or monitor), or a computer unit only.

Raspberry Pi 400 for working and learning at home




Specifications

Processor: Broadcom BCM2711 quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.8GHz

RAM: 4GB LPDDR4-3200

Connectivity: Dual-band (2.4GHz and 5.0GHz) IEEE 802.11b/g/n/ac wireless LAN, Bluetooth 5.0, BLE Gigabit Ethernet
2 × USB 3.0 and 1 × USB 2.0 ports
GPIO Horizontal 40-pin GPIO header

Video & sound: 2 × micro HDMI ports (supports up to 4Kp60)

Multimedia: H.265 (4Kp60 decode);
H.264 (1080p60 decode, 1080p30 encode);
OpenGL ES 3.0 graphics

SD card support: MicroSD card slot for operating system and data storage

Keyboard: 78- or 79-key compact keyboard (depending on
regional variant)

Power: 5V DC via USB type C connector

Operating temperature: 0°C to 50°C

Dimensions: 286 mm × 122 mm × 23 mm (maximum)

Compliance: For a full list of local and regional product approvals, please visit
www.raspberrypi.org/documentation/hardware/raspberrypi/conformity.md



WARNINGS
• Any external power supply used with Raspberry Pi 400 shall comply with relevant regulations and
standards applicable in the country of intended use.
• This product should be operated in a well-ventilated environment and should not be covered when
being operated.
• The connection of incompatible devices to Raspberry Pi 400 may affect compliance, result in damage to the unit, and invalidate the warranty.
• There are no user-serviceable parts inside Raspberry Pi 400, and opening the unit is likely to damage the product and will invalidate the warranty.
• All peripherals used with this product should comply with relevant standards for the country of use
and be marked accordingly to ensure that safety and performance requirements are met. These
articles include, but are not limited to, mice, monitors and cables when used in conjunction with
Raspberry Pi 400.
• The cables and connectors of all peripherals used with this product must have adequate insulation so that relevant safety requirements are met.
• Prolonged exposure to direct sunlight may cause discoloration.


SAFETY INSTRUCTIONS
To avoid malfunction or damage to this product please observe the following:
• Do not expose to water or moisture whilst in operation.
• Do not expose to heat from any source; Raspberry Pi 400 is designed for reliable operation at normal ambient temperatures.
• Take care whilst handling to avoid mechanical or electrical damage to the computer.

Accreditation
R1,899.90  Inc VAT
R1,999.90
Raspberry Pi 400 GPIO Header Expansion Adapter 2x 40PIN (pi400 GPIO board)
*images are for reference only, RPi400 and expansion boards are NOT included.

Description:

If you are looking for easier, more visible connection to you Raspberry Pi 400? Looking to add a HAT or other add ons? This expansion board has enough place for both with 2 full sets of GPIO pins at your disposal.



Colour-coded header, easy expansion



Outline Dimensions


R89.90  Inc VAT
Sleeve for Raspberry Pi400 (Sleeve Pi400)
Description

Our stylish sleeve for the Raspberry Pi 400 (not included) is a great way to keep your keyboard clean and dust-free whilst adding an element of protection when travelling with your new favorite coding machine!



Whether you're taking your Raspberry Pi 400 to a coding club, to school, a friend's house or just simply putting it away when not in use, our protective sleeve is an affordable and stylish way to keep it dust-free and safe from scratches.

The stitched sleeve comes in a classic grey material with a simple velcro strap securing your Pi400 in place. The lower corner has The Pi Hut logo embossed into the material.

Note: This sleeve provides protection from scratches and dirt/dust, however, the material cannot protect against large impacts or liquids.

R109.90  Inc VAT
Raspberry Pi 400 GPIO Leaning GPIO Header Adapter (Pi400 Leaning Header)
Description:

Special Angled Header, Let The Adapter Stand At A Comfort Angle,
Make It More Convenient To Use With HATs Like SPI/DPI Display



What's in the box ?

1 x PI400 GPIO Leaning adapter

R99.90  Inc VAT
Maker Hat Base - HAT & GPIO Extension for Raspberry Pi 400 (Maker Hat pi400)
Description:

Maker Hat Base extends out all the GPIOs of the Raspberry Pi 400 in a quick and simple way - be it using your favorite HAT or building your own simple circuit with jumper wires on the mini breadboard.

Since a ribbon cable is used for the connection, the Maker Hat Base is compatible with the Raspberry Pi 3 and Pi 4 too. This is especially useful when the Raspberry Pi is enclosed in a case and you want to extend its GPIOs out for HAT.

Each GPIO pin is clearly labelled and its status LED is definitely helpful during testing and troubleshooting. The onboard buzzer and push buttons will get you start coding in no time without the need of building your own circuit. Wanna connect to some external sensors/ modules? Worry not! The onboard Grove ports (GPIO, UART & I2C) is there for you.

Features:

  • Specially designed for Raspberry Pi 400.
  • Compatible with Raspberry Pi 3 & 4.
  • Extension pins for HAT.
  • Clearly labelled GPIOs breakout for jumper wires.
  • Status LEDs for each GPIOs.
  • 1 x programmable buzzer.
  • 4 x programmable push buttons.
  • 3 x Grove ports (GPIO, UART & I2C) for external modules.
  • Onboard 3.3V regulator provides extra current up to 800mA.


What's in the box ?

  • 1 x Maker Hat Base
  • 1 x Mini Breadboard (Random Color)
  • 1 x 40 Ways Female to Female IDE cable (10cm)
  • 1 x Flat Cable Clamper with Adhesive (60mm)
  • 4 x Silicone Bumper


Resources:














R169.90  Inc VAT
LG 20MK400H 19.5inch monitor with HDMI and D-Sub (LG 19.5 20MK400H)
Description:

React Faster to The Action:
Dynamic Action Sync mode allows you to instantly react to your opponents and attack them without any display lag. It synchronizes your senses with real-time scenes in fast-paced games by minimizing input lag.

Offers Stable Image:
- Reducing the flicker level to almost zero, Flicker Safe helps you protect your eyes from exhausting flickers.

Protect Eyes with Reader Mode:
Reducing blue light to help lessen eye fatigue, Reader Mode provides optimal condition for reading. With easy joystick control, you can more comfortably read your monitor screen.

Specifications:

Size (Inch): 19.5Inch 
Size (cm): 49.4cm 
Resolution: 1366 x 768 
Panel Type: TN 
Aspect Ratio:16:9 
Pixel Pitch: 0.3177 x 0.3070 mm 
Brightness (Min.): 160 cd/m² 
Brightness (Typ.): 200 cd/m² 
Colour Gamut (Typ.): NTSC 72% (CIE1931) 
Colour Depth (Number of Colors): 16.7M 
Contrast Ratio (Min.): 360:1 
Contrast Ratio (Typ.: 600:1 
Response Time: 2ms (GtG at Faster) 
Viewing Angle (CR≥10): 90˚(R/L), 65˚(U/D) 
Surface Treatment: Anti glare, 3H 

FEATURES

Flicker safe: Yes
Reader Mode: Yes
Color Weakness: Yes
Super Resolution : Yes
Black Stabilizer: Yes
Dynamic Action Sync: Yes
Crosshair: Yes
Smart Energy Saving: Yes

SW APPLICATION

OnScreen Control (LG Screen Manager): Yes

CONNECTIVITY
D-Sub: Yes (1ea) 
D-Sub: (Max. Resolution at Hz) 1366 x 768 at 60Hz 
HDMI: Yes (1ea) 
HDMI: (Max. Resolution at Hz) 1366 x 768 at 60Hz 
Headphone out: Yes

POWER

Type: External Power (Adapter) 
AC Input: 100 - 240Vac, 50/60Hz 
Power Consumption (Typ.): 13.0W 15.0W 
Power Consumption (Sleep Mode): Less than 0.3W 
Power Consumption (DC Off): Less than 0.3W 

MECHANICAL

Display Position Adjustments: Tilt 
Wall Mountable :75 x 75 mm 

DIMENSIONS/WEIGHT

Dimension with Stand (W x H x D) 463.8 x 366.5 x 181.9 mm 
Dimension without Stand (W x H x D) 463.8 x 276.4 x 38.4 mm 
Weight with Stand 2.3kg 
Weight without Stand 2.0kg 

What's in the box?

1 x LG 20MK400H monitor
R2,099.90  Inc VAT
Raspberry Pi 400 with US Keyboard (Pi400 US board)
Raspberry Pi 400 is a complete Raspberry Pi 4-based personal computer, fully integrated into a keyboard for ease of setup and use.


Overview


Featuring a quad-core 64-bit processor, wireless networking, dual-display output and 4K video playback, Raspberry Pi 400 is a complete personal computer, built into a compact keyboard.

Raspberry Pi 400 is ideal for surfing the web, creating and editing documents, watching videos, and learning to program using the Raspberry Pi OS desktop environment.

Raspberry Pi 400 is available in a number of different regional variants and as either a computer kit, containing everything you need to get started (except for a TV or monitor), or a computer unit only.

Raspberry Pi 400 for working and learning at home




Specifications

Processor: Broadcom BCM2711 quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.8GHz

RAM: 4GB LPDDR4-3200

Connectivity: Dual-band (2.4GHz and 5.0GHz) IEEE 802.11b/g/n/ac wireless LAN, Bluetooth 5.0, BLE Gigabit Ethernet
2 × USB 3.0 and 1 × USB 2.0 ports
GPIO Horizontal 40-pin GPIO header

Video & sound: 2 × micro HDMI ports (supports up to 4Kp60)

Multimedia: H.265 (4Kp60 decode);
H.264 (1080p60 decode, 1080p30 encode);
OpenGL ES 3.0 graphics

SD card support: MicroSD card slot for operating system and data storage

Keyboard: 78- or 79-key compact keyboard (depending on
regional variant)

Power: 5V DC via USB connector

Operating temperature: 0°C to 50°C

Dimensions: 286 mm × 122 mm × 23 mm (maximum)

Compliance: For a full list of local and regional product approvals, please visit
www.raspberrypi.org/documentation/hardware/raspberrypi/conformity.md



WARNINGS
• Any external power supply used with Raspberry Pi 400 shall comply with relevant regulations and
standards applicable in the country of intended use.
• This product should be operated in a well-ventilated environment and should not be covered when
being operated.
• The connection of incompatible devices to Raspberry Pi 400 may affect compliance, result in damage to the unit, and invalidate the warranty.
• There are no user-serviceable parts inside Raspberry Pi 400, and opening the unit is likely to damage the product and will invalidate the warranty.
• All peripherals used with this product should comply with relevant standards for the country of use
and be marked accordingly to ensure that safety and performance requirements are met. These
articles include, but are not limited to, mice, monitors and cables when used in conjunction with
Raspberry Pi 400.
• The cables and connectors of all peripherals used with this product must have adequate insulation so that relevant safety requirements are met.
• Prolonged exposure to direct sunlight may cause discoloration.


SAFETY INSTRUCTIONS
To avoid malfunction or damage to this product please observe the following:
• Do not expose to water or moisture whilst in operation.
• Do not expose to heat from any source; Raspberry Pi 400 is designed for reliable operation at normal ambient temperatures.
• Take care whilst handling to avoid mechanical or electrical damage to the computer.

Accreditation
This is the Raspberry Pi400 keyboard only. You will need a Power Supply, micro SD, micro HDMI Cable, Display and mouse as well. All of these items are available in kit form as well. See related products
R1,299.90  Inc VAT
R1,379.90
Per Page      1 - 17 of 17
  • 1