Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
This module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor
R29.90  Inc VAT
The L293D Dual H-Bridge IC is able to run four solenoids, two DC motors or one bi-polar or uni-polar stepper motor, with up to 600mA per channel!
R14.90  Inc VAT
Use this PIR for a DIY alarm system or occupancy control. Perfect for your home automation project.
R212.64  Inc VAT
R269.90
Ever wanted to use two different operating systems with the same Pi at the flick of a switch?
R269.90  Inc VAT
2-Axis FPV Camera Cradle Head w/ 9g Dual Servo / Steering Gear for Robot / R/C Car - Black Blue (cam pan/tilt bracket)
You'll have to know how to control this unit from you GPIO port or a servo controller module(Not included).


Description:



Specially designed for R/C car and robotics; Can be pan/tilt 180 degrees; Can hold ultrasonic sensor, IR sensor, camera or other sensors.

Specifications:

- Weight: 15g
- Working torque: 1.6KG/cm
- Response rotary speed: 0.10s / 60 degree
- Working temperature: -30~60'C
- Dead zone: 2ms
- Plug: JR, Futaba
- Rotating angle: Max. 180 degree
- Servo: digital servo
- Working current: 0.02A
- Working voltage: 3.5~6V
- Structure: Nylon plastic gear

What's in the box?:

1 x Cradle head w/ servo (25.6 /-2cm)
1 x Pack of screws
R209.90  Inc VAT
Dual Experimental kit RPI and Uno (Dual experimental board kit)
PLEASE NOTE: RASPBERRY PI AND ARDUINO NOT INCLUDED

Description:

This is an Experimental Platform For Raspberry Pi 2/3 Model B and B and Arduino UNO R3
With Breadboard, Male to Female jumper cables,  T type 40Pin  GPIO, Ribbon Cable.

Package includes:

1 x Acrylic Platform (with Installation screws pack)
1 x Breadboard 800
10 x Male to Female jumper cables (Length: 25cm±2cm)
1 x T type 40Pin GPIO
1 x 40 pin ribbon Cable (20cm±2cm Length)
R349.90  Inc VAT
USB Detector Current Voltage 3V-9V Tester Dual USB Dual display (USB Docter Dual)
Description:

Use the USB Charger Doctor to measure the working voltage and current output for any USB port and project. This plastic dongle plugs between a USB device, and passes the data lines through. There's a 0.05 ohm resistor in line with the power pin that is used to measure current draw. The Doctor's digital display instantly reads the numbers out for testing devices such as chargers, cables, and cell phones.

You can use this device from 3.5-7VDC input voltage (although most USB devices tend to hover around 4.75 to 5.25) and up to 3A of current. It displays both voltage and current readouts. It's a very handy tool for testing USB devices, checking load levels and debugging battery chargers and boost converters.

Specifications:

Voltage range: 3.3V-9V
Current range: 0-3A
Voltage display: red
Current display: blue
Out put : 2 USB
Size: 52mm x 34mm x12mm
Weight: 16g
Shell color: Dark black

What's in the box?:

1 x Voltage Tester Dual USB

R179.90  Inc VAT
L9110S H Bridge Stepper Motor Dual DC Driver Controller Module (L9110S small H Bridge)

Description:

There are two L9110S motor controller chips onboard
This module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor

Feature:

Work under low static current
Power supply voltage: DC 2.5V - 12V
Each channel has 800mA continuous current output
Low saturation pressure drop
TTL / CMOS output level compatible, can be connected directly to the CPU
Output built-in clamping diode, apply to the perceptual load
Control and drive integrate in IC
Pin high pressure protection function
Working temperature: 0°C - 80°C
Size: 29 x 21mm(L x W)

Circuit diagram:

 


Package includes:

  1x L9110S stepper motor driver

Robot control with Python

This module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor
R29.90  Inc VAT
L298N Dual H-Bridge Stepper Motor Driver Board (H Bridge big red dual stepper)
Description:

The L298N is a dual H-Bridge motor driver which allows speed and direction control of two DC motors at the same time. The module can drive DC motors that have voltages between 5 and 35V, with a peak current up to 2A.

Specifications:

Double H bridge drive
Chip: L298N (ST NEW)
Logical voltage: 5V
Drive voltage: 5V-12V
Logical current: 0mA-36mA
Drive current: 2A (MAX single bridge)
Storage temperature: -20 to 135
Max power: 25W
Weight: 30g
Size: 43 x 43 x 27mm

Note:

This module has a built-in 5v power supply, when the driving voltage is 7v-12v, this supply is suitable as a power supply.
DO NOT connect input voltage to 5v on controller interface.
When ENA is enabled IN1 IN2 control OUT1 OUT2
When ENB is enabled IN3 IN4 control OUT3 OUT4

Note:  Package does not include the board mounting screws.

Package includes:

1 x  L298N Module

Resources:

Robotic control with python



R39.90  Inc VAT
L293D Dual H-Bridge IC - Solenoid, DC & Stepper Motor Driver (L293D IC H-bridge)
Description:

The L293DNE Dual H-Bridge IC is able to run four solenoids, two DC motors or one bi-polar or uni-polar stepper motor, with up to 600mA per channel!
 
Each chip contains two full H-bridges (four half H-bridges) which means you can drive four solenoids, two DC motors bi-directionally, or one stepper motor. Just make sure they're good for under 600 mA since that's the limit of this chip. They do handle a peak of 1.2A but that's just for a short amount of time. What we like most about this particular driver is that it comes with built in kick-back diodes internally so you dont have to worry about the inductive kick damaging your project or driver
 
 
The L293D Dual H-Bridge IC - Stepper & DC Motor Driver Features:
  • Dual H-Bridges - run four solenoids, two DC motors, or one uni-polar or bi-polar stepper motor
  • Output Current: 600mA per channel (1.2A Max)
  • No of Channels: 4
  • Input: 5V Logic
  • Supply Voltage Range: 4.5V to 36V
  • No. of Pins: 16
  • Operating Temperature Range: 0°C to 70°C


What's in the box?:

1 x L293D Dual H-Bridge IC

Downloads

L293DNE Data Sheet

Tutorials

Controlling a Stepper Motor with the L293D

Raspberry Pi: Controlling a DC Motor

Arduino: Stepper Motors

Arduino: DC Motor Reversing

The L293D Dual H-Bridge IC is able to run four solenoids, two DC motors or one bi-polar or uni-polar stepper motor, with up to 600mA per channel!
R14.90  Inc VAT
Dual USB 9V/12V/24V/36V to 5V Converter DC-DC 3A Step Down Power Module (5V dual usb converter)
Description:

With a load capacity of Maximum output 3A in total on both ports. This module is perfect for powering most small electronic projects. Mostly used for: mobile power, mobile phones, flat-panel USB5V powered devices

Specifications:


  • Input: 9V-36V
  • Output: 5V / 3A (MAX)
  • Efficiency: 92% (MAX)
  • Switching frequency: 150KHZ
  • Operating temperature: -40 ℃ - 85 ℃
  • Load capacity: Maximum output 3A in total on both ports
  • Application: mobile power, mobile phones, flat-panel USB5V powered devices

Package includes:

1 x DC Power Module
R74.90  Inc VAT
Dual USB Output 6-24V To 5.2V 3A DC-DC Step Down Power Converter (Dual USB 3A green step down)
Description:

If you love to power your projects with convenient 5V USB, then this DC-DC Step-Down Buck Module with Dual USB 5V 3A Output is an ideal choice!

Dual USB Output Buck Power Supply Adapter For Car Auto Cellphone MP3 and much more!

Specifications:

1.Model:usb1002
2.Name: Power Module
3.Features: Buck Charge
4.Product size: 33mm x 33mm x 8mm
5.Input voltage range: 6-24V
6.Output voltage: 5.2V (the output terminal is 5.3-5.4V, the load side is 5.1-5.2V)
7.Output Current: 3A (without heat sink, the stability of the output current is 2A)

Note:

1. Input voltage can not exceed 24V, otherwise, it will cause damage to the device!
2. The input positive and negative can not be reversed, otherwise it will cause damage to the device!

Package Includes:

1 x Dual USB Power Module
R39.90  Inc VAT
Wemos® Lolin ESP32 WiFi Bluetooth Dual ESP-32 ESP-32S ESP8266 OLED Module (ESP32 with OLED display)
Description:
 
ESP32 is already integrated with antenna and RF, power amplifier, low noise amplifiers, filters and the power management module.
An entire solution on the least amount of PCB area. This board is a 2.4 GHz dual mode WiFi and bluetooth chip by tsmc 40nm low power technology, power and optimized RF characteristics for a wide range of applications.
 
Features:
 
High performance
Small volume, easily embeded to other products
Strong function, with the support of lwIP protocol, freertos
Support three modes: AP, STA and AP STA
Support for lua program, easy to develop

Package includes:

1 x Wemos® Lolin ESP32 OLED Module
R229.90  Inc VAT
SONOFF® PIR2 Wireless Dual Infrared Motion Sensor (Sonoff PIR sensor)
Description:

Detect human movement and any presence and send an alarm message to your phone. Keep an eye on your house. Works nicely with SONOFF 433 RF BridgeR2.

Features:

Dual infrared
Ultra-low power microprocessors
Double temperature compensation technology
Robust and durable, suitable for homes, offices, sheds, garages etc.
Easy installation and set-up.
Wall-mounted
 
Specifications:
 
Transmit distance: 150m (open)
Voltage: 3V
Standby current: ≤9μA
Alarm current: ≤10mA
Wireless frequency: 433.92MHz
Wireless Transmit Code: 1527Mhz (default)
Detection distance: [email protected] 25℃
Detection angle: 110 degrees
Maximum coverage area: 12m*12m
Alarm indicator light: on for 3 seconds
Working environment: indoor
Tamper switch: normally closed
Anti-white light intensity: 10000Lux
Product Size:120mm x 62mm x 46mm
Battery type: 2 x AA batteries(not included)
Weight: 120g

Use this unit with the Sonoff wifi bridge
 
Package includes:
 
1 x SONOFF® PIR2 Wireless Infrared Detector
Use this PIR for a DIY alarm system or occupancy control. Perfect for your home automation project.
R212.64  Inc VAT
R269.90
SONOFF® Dual Channel WIFI APP Remote Control Switch Socket Module 250V For Smart Home (Sonoff dual ch switch)
Description:

Sonoff Dual is a WiFi based 2 gang switch that can connect and independently control two connected appliances or lights. This simply means 1 Sonoff Dual control switch equals to 2 Sonoff basic switches! Sonoff Dual 2 gang light switch inherits Sonoff Basic switch’s advantages such as easy installation and operation, quick WiFi access, remote control through APP EweLink.

In the application eWeLink, available on both iOS and Android, users can independently turn on/off each of the two connected devices. But the button on Sonoff Dual 2 gang WiFi light switch is not an ON/OFF toggle switch, it is only a WiFi pairing button. Users can set single/repeat/countdown timing schedules to turn on/off at a specified time, and also share with others so that they can control together.

Works With Amazon Alexa

You can ask Alexa to turn on/off Sonoff Dual.

Standard voice control commands phrases for Sonoff Dual (if you just say the device name, Alexa will turn on/off all the 2 gangs immediately):

Alexa, turn on {deviceName}
Alexa, turn off {deviceName}

Alexa, turn on {deviceName} {gangName}
Alexa, turn off {deviceName} {gangName}

Explanation: if the device name of your Sonoff Dual is "My Switch", the gang name is "Gang 1", then you can control with "Alexa, turn on My Switch Gang 1".

For detailed tutorial, please click here.

Check out the amazing features of this product below:

Features

  • Remote turn on/off through the APP EWeLink
  • Independently control 2 devices in APP EWeLink
  • Supports tracking device status on EWeLink
  • Supports setting countdown, single and repeat timing tasks
  • Works with Amazon Echo, Echo Dot, Amazon Tap
  • Works with Google Home, Google Nest
  • Works with IFTTT

Specifications

  • Power Supply: 90-250V AC
  • Max Current: 16A(2 gang),10A(1 gang)
  • Max Power:  3500W(2 gang) / 2200W(1 gang)
  • Product Dimensions: 114*52*32mm
  • Color: White
  •  Frequency: 802.11 b/g/n 
  • Security Mechanism: WPA-PSK/WPA2-PSK
  • Humidity: 5%-90%RH, Non-condensing
  • Enclosure Material: Fire-retardant ABS V0
  • Operating Temperature: 0ºC-40ºC(32°F-104°F)
  • Gang: 2
  • Certification: CE, RoHS, FCC

Package

1 x Sonoff Dual

R339.90  Inc VAT
Dual 15A 600V 12 Position Screw Terminal Strip Covered (12 way connecter strip)
Description:

Good to build prototype project, electric wiring, other electronic design for electricians or technicians.


Specifications:

Contact Material: Copper
Insulator Material: ABS plastic
Colour: Black
Maximum rated voltage: 600V
AMPS Maximum Rated: 15A
Poles: 12-pin (two rows)
Weight: 244g(appr.)
Size:  12.7x2.2x1.6cm (appr.)


Package includes:
1 X Terminal Electric connector Strip Block
R69.90  Inc VAT
SONOFF® DR DIN Rail Tray Case Holder For Sonoff Basic / RF / POW / TH16 / TH10 / DUAL / G1 (Sonoff DIN rail tray)
Description:

As you know, most of the Sonoff products are not DIN rail mounted, which makes it difficult to put the Sonoff products into the switchboard. We have now launched another inexpensive and practical accessory - Sonoff DR - DIN Rail Tray.

Sonoff DR can work with most of our Sonoff products, including Sonoff Basic, Sonoff RF, Sonoff Pow, Sonoff TH10/16, Sonoff Dual, Sonoff G1.

The installation is very simple. The Sonoff DR has a blue part, which allows you to push fit the switch to DIN rail or pull to remove it. No external tools are required.

The material is fire-retardant ABS and the fire rating is V0. The Sonoff DR comes with 4 x M3 screws, which perfectly fit Sonoff's original holes.

Package includes:

1 x Sonoff DIN Rail Tray
4 x M3 screws

R104.90  Inc VAT
2 in 1 Dual Micro SD Switcher for Raspberry Pi (Dual SD switch)
Description:

Ever wanted to use two different operating systems with the same Pi at the flick of a switch? Well now you can!

This 2 in 1 micro SD card switcher is specially designed for the Raspberry Pi, and you can now enjoy the convenience of using two micro SD cards at the same time on the same Pi!

To transfer between your operating systems, insert two micro SD cards into the adaptor (one on top, and one at the bottom, Then ensuring the Pi is switched off and power removed, switch the switch on the adaptor! Next time you boot, it will boot the secondary micro SD card!

2 in 1 Dual Micro SD Switcher for Raspberry Pi Features:

  • Designed for Raspberry Pi B /2/3/Zero
  • Dual micro SD card slot with switch
  • Enables the use of two operating systems on the same Pi without needing to remove/swap the micro SD cards.
  • Dimension: 36mm(length) x 24mm(width)

During testing we noticed that both micro SD cards have to be inserted for the unit to operate.
Ever wanted to use two different operating systems with the same Pi at the flick of a switch?
R269.90  Inc VAT
DC 0-100V 10A Digital Voltmeter Ammeter Dual Display Gauge 0.28" Red Blue LED (volt/amp meter 10A)
Description:

This is a Panel Meter that measures Voltages and Current. The display can measure voltages from 0v to 100v dc and measure current from 0 to 10 Amps. The display has 3 segments and can simultaneously calculate the power consumption in watts.



Specifications:

  • Voltage 0.0V to 100V
  • Current 0A to 10A
  • Working voltage DC 4 to 30V
  • Working current <20mA
  • Size 48mm x 29mm x 22mm

R74.90  Inc VAT
Aluminium Alloy Case for Raspberry Pi 4 Dual Cooling Fans (Pi4 heatsink case 2fan)
Please note: Raspberry Pi 4 is not included

Description

  • Aluminium Alloy Case for Raspberry Pi 4 Model B
  • Comes with dual cooling fans
  • Firm, dust resistance, excellent heat spreading

Black Armour for Raspberry Pi Pi 4

Equip Your Pi 4 with Armour and Cooling Fans, Call Me Icy Beauty



High Quality & Durable Aluminium Alloy

Aluminium Alloy, Oxidation & Sand Blasting & Coating, Corrosion Proof, More Durable



Chip-contacted Heat Spreader

Built-in Heat Spreader, Fastly Transfers Heat from Pi CPU to the Whole Case




Clever Opening Design, Precise Cut-out

Utilizing Advanced Processing Technology, Make It Highly Matching the Board

WiFi And Bluetooth, As Good As Before

Non-shielding Design, No Worry for the WiFi and Bluetooth Signal



What's in the box?


1 x  Aluminium Alloy Case for Raspberry Pi 4 Dual Cooling Fans



R209.90  Inc VAT
Raspberry Pi Dual-Band 5GHz/2.4GHZ USB WiFi Adapter with Antenna (2.4 and 5ghz antenna wifi)

Description

This product no longer works with the provided driver/instructions due to a kernel change in Raspberry Pi OS. You can download an older version of Raspberry Pi OS which works with the provided driver, however you won't be able to update that image. We are working on finding a new driver.


If the on-board WiFi antenna on your Raspberry Pi isn't giving you enough range, this dual-band 2.4GHz/5GHz USB 2.0 WiFi adapter is a great option.

The antenna is dual-band meaning it can connect to a 2.4GHz or 5GHz network, and supports the 802.11ac standard (3 times faster than 802.11n networks).

Note: Currently only works with the Raspberry Pi 4 (we're working on finding a driver for older versions!)

The USB 2.0 adapter features an LED status light and removable antenna.

Installation

The adapter requires driver installation which will take around 5 minutes. See our installation guide here.

Features

  • Compatible with Raspberry Pi 4 only
  • 150Mbps at 2.4GHz and 433Mbps at 5GHz
  • The external high gain adjustable & detachable antenna provides wide coverage for your wireless network
  • Backwards compatible with 802.11n/g/b/a
  • LED status light

Tech Spec

  • Chip: Realtek RTL8811cu
  • Interface: USB 2.0
  • Wireless transmit power: 20dBm
  • Network Speed: 600Mbps
  • Network Mode: Dual Band
  • Applicable System: Windows Vista / XP / 2000/7/8/10, Linux, Mac OS
  • USB Head Size: 4.5 x 2 x 1.2cm
  • Antenna Length: 10.8cm 
  • Net Weight: 12g

Package includes:

  • 1 x Dual Band 2.4G/5G USB Wifi Antenna Adapter
  • 1 x CD

Note: Does not include Raspberry Pi

R189.90  Inc VAT
Dual GPIO Expander for Raspberry Pi Pico, Two Sets of Male Headers (ws pico expander dual)
Description:

Two sets of standard Raspberry Pi Pico GPIO male headers

Features at a glance
  • Standard Raspberry Pi Pico female header for direct attaching Raspberry Pi Pico (if male header soldered), or just through jumper wires
  • Two sets of 2x20 male header, allows connecting more Raspberry Pi Pico expansion modules
  • Clear pinout labels on the front side, easy to use
  • Immersion gold process, beautiful & practical, stunning aesthetic looking
Raspberry Pi Pico header compatibility

Center female pin header for direct attaching the Raspberry Pi Pico



Two sets of 2x20 male header

Allows connecting more Raspberry Pi Pico expansion modules


Please make sure there are no pin conflicts between the modules you want to use together before connecting.

Raspberry Pi Pico and expansion modules are NOT included.

Immersion gold process

Black base panel, white pinout labels, golden rounded outline, stunning aesthetic



Outline dimensions


What's in the box?:

1 x Dual GPIO Expander 

R124.90  Inc VAT
PWM 30A Dual USB Solar Panel Battery Regulator Charge Controller 12/24V LCD (30A PWM solar charge controller)
Description:

Solar panels are a clean and ecological source of electricity.

Obtaining this energy, however, poses a number of challenges for device designers. The amount of energy produced by the panel is strongly dependent on the angle of incidence and the intensity of the light falling on the surface of the cells. This, in turn, leads to unstable power supply parameters at the output, as even shading a small part of the panel may drastically reduce the efficiency.


The optimal solution to the above-mentioned problems is the use of a set consisting of a solar panel, a battery and a charge controller. Such a set allows to ensure constant parameters of power supply to receivers, and also to store energy produced excessively for later use.


The 30A-PWM-LCD solar charge controller allows you to connect panels connected to each other both in series and in parallel - remembering not to exceed the permissible values of current and voltage at the input of the device. Due to the operating characteristics of the PWM controllers, it should be remembered that when the panels are connected in series, the rated voltage at the output for charging the battery is 24V.

PWM stands for Pulse Width Modulation. PWM charge control devices can be explained as an electrical switch between batteries. The switch can be quickly switch on and switch off. Therefore, desired voltage can be obtained to charge the batteries. The charge current will be slowly decreased as the batteries charged.

Specifications:
 
Rated Voltage: 12V/24V(Auto recognition)
Rated Current: 30A
Charging Mode: PWM
USB output: 5V 2A
Self-consume: <10mA
Operating Temperature: -35 ~ 60 °C
Storage Temperature: -35 ~ 60 °C

Typical usage example:

 
Package Includes:
 
1 x 30A Solar Charge Controller
R399.90  Inc VAT
Aibecy 2 in 1 Out Dual Color Metal Hotend Extruder Kit with Cable 0.4mm Brass Nozzle 24V (24v 2in1 hotend)
Aibecy 2 in 1 Out Dual Color Metal Hotend Extruder Kit with Cable 0.4mm Brass Nozzle Print Heat 24V for CR-10 Series Ender-3


Description:

Dual color metal hotend extruder kit for CR-10 series Ender-3 3D Printer.

0.4mm nozzle; 1.75 filament size; aluminum heating block; heater wire 12V/24V for option.
Can access two lines of filament, switch between two input when printing, and extrude through one hot end.
Color switching is fast and stable, and print quality has no obvious defects.
The heating block and the heat sink are connected and fixed by two screws, making the print head more stable.


Specifications:

Colour: Black
Heat Sink Material: Aluminum Alloy
Heater Material:Aluminum Alloy
Nozzle Material: Brass
Pneumatic Connector Material: Stainless Steel
Voltage: 24V
Wire Length: Approx. 1400mm
Body Size: 80mm x 25mm x 22mm


What's in the box?

1 x Hotend Extruder Kit






R699.90  Inc VAT
Per Page      1 - 20 of 23