Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
The Official Raspberry Pi Zero & Zero Wireless Case is now available!
R59.90  Inc VAT
The L293D Dual H-Bridge IC is able to run four solenoids, two DC motors or one bi-polar or uni-polar stepper motor, with up to 600mA per channel!
R14.90  Inc VAT
This neat little HAT case for the Raspberry Pi B+/2/3 makes accessing your Raspberry Pi HAT a breeze!
R69.61  Inc VAT
The JAM HAT is the perfect add-on board for learning how to code electronic hardware with the Raspberry Pi, and designed for use by beginners, schools and coding clubs in an easy-to-use, clearly laid out format.
R129.90  Inc VAT
The WD Enclosure Kit for Pi Zero is a great expansion kit to get started with your Pi Zero.
R392.41  Inc VAT
Official Raspberry Pi Zero Red & White Case (zero official case red/white)

The Official Raspberry Pi Zero & Zero Wireless Case is now available! Specially made and beautifully crafted in red & white, this nifty and tactile snap-together case is designed to protect your Zero!

The case comes with three swappable lids, each with a different function:

  • Raspberry Pi Camera lens holder lid with included extra short 35mm Raspberry Pi Zero camera cable(This cover is for the normal Raspberry Pi camera. The zero camera lens is to small to fit snugly.)
  • GPIO access lid, with GPIO hole for all your hacking needs
  • Solid lid, for those who want an all around protected Zero!

The Official Raspberry Pi Zero Red & White Case Features:

  • Fabulous Raspberry Red and White Colour Combination
  • 2 Part "Snap-Fit" Enclousure, with 3 separate lids (GPIO/Camera/Solid)
  • Underside slot for GPIO access
  • Cut-outs for all connection points
  • No SD card access (keeps your card protected!)
  • Included 4 x Stick on rubber feet for case stability
Please note:
Some mini-HDMI cables will need to have their shroud's cut down to fit the official case.
The Official Raspberry Pi Zero & Zero Wireless Case is now available!
R59.90  Inc VAT
Kawau C296 USB SD & Micro SD Card Reader (512GB) (card reader Kawau)

Need a high quality SD & Micro SD card reader/writer that can handle SD card sizes up to 512GB? We've found one! The Kawau C296 2 in 1 USB card reader features two slots, one for a standard size SD card, and one for Micro SD cards. It uses USB 2.0, with transfer speeds up to 480Mbps, and it's plug and play! A lot of cheaper SD card readers will not read cards above 32GB (or even 16GB on some of the really cheap ones), but never fear! You can now future proof your SD card library, safe in the knowledge that your Kawau SD card reader can take cards up to 512GB's!

Supports SD, SDHC, SDXC, MMC, Exteme SD, Mini SD, Micro SD, Micro SDXC, Micro SDHC Memory Cards, in addition to the latest format UHS cards.

Technical Details

  • Brand: Kawau
  • Model: C296
  • Compatible Cards:
    • SD
    • SDHC
    • SDXC
    • MMC
    • Extreme SD
    • Mini SD
    • Micro SD
    • Micro SDXC
    • Micro SDHC
    • UHS
  • Supports Card Sizes:
    • 4GB
    • 8GB
    • 16GB
    • 32GB
    • 64GB
    • 128GB
    • 256GB
    • 512GB
  • Colour: Black
  • Blue Transfer Light
  • Supports up to 512GB
  • Size: 60 x 17 x 8.5 mm
  • Weight: 16.05 g
R69.90  Inc VAT
USB Detector Current Voltage 3V-9V Tester Dual USB Dual display (USB Docter Dual)

Use the USB Charger Doctor to measure the working voltage and current output for any USB port and project. This plastic dongle plugs between a USB device, and passes the data lines through. There's a 0.05 ohm resistor in line with the power pin that is used to measure current draw. The Doctor's digital display instantly reads the numbers out for testing devices such as chargers, cables, and cell phones.

You can use this device from 3.5-7VDC input voltage (although most USB devices tend to hover around 4.75 to 5.25) and up to 3A of current. It displays both voltage and current readouts. It's a very handy tool for testing USB devices, checking load levels and debugging battery chargers and boost converters.

R149.90  Inc VAT
Discontinued: Official Raspberry Pi 3B and Pi3B+ Black & Grey Case (AW C4 official case Pi 3 Black/Grey)

PLEASE NOTE: Rapsberry Pi not included.

The Official Raspberry Pi 3 Model B Case is now available! Specially made and beautifully crafted, this nifty and tactile snap-together case is designed to protect your RPi 3! Side pieces can be individually removed to enable access to the GPIO, and the top can also be removed to enable the addition of HATs or other GPIO periphery! There's even LED lights pipes to top it all off!

Features of the Official Raspberry Pi Case

  • Fabulous Raspberry Black and Grey Colour Combination

  • 5 Part "Snap-Fit" Enclosure

  • Cut-outs for all connection points

  • Micro SD card cut-out

  • Plastic LED light protector

  • Stick on rubber feet for case stability

R109.90  Inc VAT
ULN2803A: 8 Channel Darlington IC - Solenoid, DC & Stepper Motor Driver (Darlington stepper driver IC)
Bring in some muscle to your output pins with 8 mighty Darlingtons! This DIP chip contains 8 drivers that can sink 500mA from a 50V supply and has kickback diodes included inside for driving coils. This will let your little microcontroller or microcomputer power solenoids, DC motors (in one direction) and unipolar stepper motors. The inputs can be driven by 3.3V or 5V logic and the IC fits nicely in any breadboard or perfboard.
 
Please note, this is an 'open collector' driver - it can only be used to connect the load to ground and there will be a 1 Volt (or more) 'drop' across the internal transistors.
 
This is a genuine Toshiba part, not a cheap replica! 
 
The ULN2803: 8 Channel Darlington IC (Solenoid/Unipolar Stepper Driver) Features:
  • The ULN2803APG / AFWG Series are high−voltage,high−current darlington drivers comprised of eight NPN darlington pairs.
  • All units feature integral clamp diodes for switching inductive loads.
  • Applications include relays, hammer, solenoid, unipolar steppers, lamp and display (LED) drivers etc.
  • Output current (single output): 500 mA (max)
  • High sustaining voltage output: 50 V (min)
  • Output clamp diodes
  • Inputs compatible with various types of logic.
  • Package Type−APG : DIP−18pin

Downloads

ULN2803 Data Sheet

Tutorials

How to Control a Stepper Motor using your Raspberry Pi & the ULN2803 Driver Chip

R28.90  Inc VAT
L293D Dual H-Bridge IC - Solenoid, DC & Stepper Motor Driver (L293D IC H-bridge)
The L293DNE Dual H-Bridge IC is able to run four solenoids, two DC motors or one bi-polar or uni-polar stepper motor, with up to 600mA per channel!
 
Each chip contains two full H-bridges (four half H-bridges) which means you can drive four solenoids, two DC motors bi-directionally, or one stepper motor. Just make sure they're good for under 600 mA since that's the limit of this chip. They do handle a peak of 1.2A but that's just for a short amount of time. What we like most about this particular driver is that it comes with built in kick-back diodes internally so you dont have to worry about the inductive kick damaging your project or driver
 
 
The L293D Dual H-Bridge IC - Stepper & DC Motor Driver Features:
  • Dual H-Bridges - run four solenoids, two DC motors, or one uni-polar or bi-polar stepper motor
  • Output Current: 600mA per channel (1.2A Max)
  • No of Channels: 4
  • Input: 5V Logic
  • Supply Voltage Range: 4.5V to 36V
  • No. of Pins: 16
  • Operating Temperature Range: 0°C to +70°C

Downloads

L293DNE Data Sheet

Tutorials

Controlling a Stepper Motor with the L293D

Raspberry Pi: Controlling a DC Motor

Arduino: Stepper Motors

Arduino: DC Motor Reversing

The L293D Dual H-Bridge IC is able to run four solenoids, two DC motors or one bi-polar or uni-polar stepper motor, with up to 600mA per channel!
R14.90  Inc VAT
Crocodile Test Clamps(pair) (2 silver croc clamps)
Features :
 
Crocodile clamps, 51mm length. Screw fixing for cable.
Great for using on test leads.
 
Length : Approx. 51mm / 2.01"
Color : Silver
 
Package Includes :
 
2 x Crocodile Clamps
NOTE: The item doesn't include screws and nuts.
R16.90  Inc VAT
T Style 40-Pin GPiO Breakout Board for Raspberry Pi 3 B, Pi 2 B & Pi B+ (T Board)

Description:

Pic is for illustration purposes only.

Colour might differ between blue and red as per manufacturer stock availability.

This T shaped breakout board makes it easier to use the GPIO pins as it is bigger in size and labeled.

The board also tightly fits on to a breadboard making electronic experiments much easier.

Specifications:

  • 40 Pins means it's ready for use on the Pi3B,Pi2B and B+

Contents:

  • 1 x T Style 40-Pin GPiO Breakout Board

Resources:


R69.90  Inc VAT
Raspberry Pi B+/2/3 HAT Case Black & Clear (hat case)

RASPBERRY PI NOT INCLUDED

This neat little HAT case for the Raspberry Pi B+/2/3 makes accessing your Raspberry Pi HAT a breeze! The transparent top plate clips on and off so you can access the GPIO area without having to remove the Pi from the box! It's perfect for hacking and prototyping, whilst keeping your Raspberry Pi safe and snug!

It's a three part clip case, which features cut out for all the ports. Camera CSI & touchscreen DSI cables can be accessed by removing the HAT cover.

Features:

  • Black Gloss Case with Transparent HAT Cover
  • Fits the Raspberry Pi B+/2/3
  • Port Access for all connectors. CSI and DSI Accessed via the HAT cover
  • SD Card Slot
  • Air Vents to keep your Pi Cool
  • No Tools required for Assembly
  • 3 Part Clip Case
  • Includes 4 x Rubber Feet
  • Dimensions: 63.9mm x 93.5mm x 26.6mm
  • Raspberry Pi Embossed Lid
  • Material: ABS & PC-ABS
This neat little HAT case for the Raspberry Pi B+/2/3 makes accessing your Raspberry Pi HAT a breeze!
R69.61  Inc VAT
Adafruit DC & Stepper Motor HAT - Mini Kit (Adafr DC and Step Mini Kit)

Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control.

Raspberry Pi and motors are not included.

Since the Raspberry Pi does not have a lot of PWM pins, we use a fully-dedicated PWM driver chip onboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or HATs to the same pins.

In fact, you can even stack multiple Motor HATs, up to 32 of them, for controlling up to 64 stepper motors or 128 DC motors (or a mix of the two) - just remember to purchase and solder in a stacking header instead of the one we include.

Motors are controlled by TB6612 MOSFET drivers with 1.2A per channel and 3A peak current capabilitya big improvement over L293D drivers and there are built-in flyback diodes as well.

We even had a little space so we added a polarity protection FET on the power pins and a bit of prototyping area. And the HAT is assembled and tested here at Adafruit so all you have to do is solder on the included 2x20 plain header and the terminal blocks.

Lets check out these specs again:

  • 4 H-Bridges: TB6612 chipset provides 1.2A per bridge (3A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC.
  • Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
  • Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
  • Big terminal block connectors to easily hook up wires (18-26AWG) and power
  • Polarity protected 2-pin terminal block and jumper to connect external 5-12VDC power
  • Works best with Raspberry Pi model A+, B+, Pi 2 B or Pi 3 B.
  • Install the easy-to-use Python library, check out the examples and you're ready to go!

Comes with an assembled & tested HAT, terminal blocks, and 2x20 plain header. Some soldering is required to assemble the headers on. Stacking header not included.

Raspberry Pi, motors, and battery pack are not included but we have lots of motors in the shop and all our DC motors, and stepper motors work great. Check out Adafruit's detailed tutorial for tons of info including schematics, wiring diagrams, python libraries and example walkthroughs.

R379.90  Inc VAT
GX16-8 16mm 8 Pin Male & Female Wire Panel Connector Circular Aviation Socket Plug (Aviation 8pin connector)
Description:

Name: Aviation Connector Plug
Item: GX16-8 Pin Male & Female Connector
Model: GX16-8
Rated current: 5A
Interface type: AC / DC
Material: Zinc alloy
Shape: Round
Diameter: 16mm
Pin Quantity: 8

Package Includes:

1 x GX16-8 Pin Male & Female Connector
Perfect for your sensor cables
R44.90  Inc VAT
SONOFF® E27 Wifi Lamp holder ES AC100-250V (Sonoff lamp holder)
Description:
-WiFi wireless light holder that can connect to various light bulbs with E27 screw base.
-It sends data to cloud platform through WiFi Router, which enables you to remotely control all light bulbs with the App eWeLink on your smart phone.
-It makes all lights smart, as long as your phone has network you can remotely turn on or turn off your lights from anywhere at any time. And by setting timing schedules for your lights, you can maintain a carefree life.
-The App eWeLink enables you to control your devices easily. You can download the iOS version in App Store and the Android version in Google Play.

Specifications:
voltage:AC100-250V(50/60Hz)
max current:2A
operating current:1A
max wattage:400W
color:White
humidity:5%-95%
wireless frequency:2.4Ghz

Features:
Support WiFi network
Support status tracking, devices' status will timely feedback to your App
Support Max 8 timing tasks for each added device
Support numerous WiFi smart light holders one smart phone
Easy installation, easy handling and can be activated immediately and stably

Note:433Mhz RF remote and Light bulb is not included.

Package Includes:
1 x e27 wifi light holder
R399.90  Inc VAT
JAM HAT (LED & Buzzer Board) (JAM Hat)

Please note: Raspberry Pi is not included with this board

Buttons, buzzers and bright LEDs! If you're starting on your Raspberry Pi journey, we've got the board just for you. ModMyPi has teamed up with York Pi Jam to bring you the JAM HAT!

Each board is fully assembled, ready to plug and play, and features:

  • 6 x "Traffic Light" LEDs (2 x Red, 2 x Yellow, 2 x Green)
  • 2 x Tactile "Push to Make" Buttons
  • 1 x Buzzer/Sounder

The JAM HAT is the perfect add-on board for learning how to code electronic hardware with the Raspberry Pi, and designed for use by beginners, schools and coding clubs in an easy-to-use, clearly laid out format, with fully supported examples and code! The JAM HAT has the Pi's GPIO fully exposed, leaving you free to connect other hardware as your projects grow!

The product comes fully assembled with our push-fit "plug & play" Single Shroud Header, Socket Header, and 14mm HAT Mounting Kit, so there's no soldering required, just plug in and bleep bleep bloop, flashy flash, click click!

Features:

  • Fully Assembled - No Soldering!
  • Mounting Hardware Included
  • HAT Format
  • GPIO Exposed for External Connections
  • Works with Python or Scratch
  • Full Code Libraries & Examples Available (work in progress) at https://github.com/modmypi/Jam-HAT
  • 2 x Tactile "Push to Make" Buttons
  • 6 x "Traffic Light" LEDs (2 x Red, 2 x Yellow, 2 x Green)
  • 1 x Buzzer/Sounder


More info available about Raspberry Jam at https://projects.raspberrypi.org/en/jam/jam

The JAM HAT is the perfect add-on board for learning how to code electronic hardware with the Raspberry Pi, and designed for use by beginners, schools and coding clubs in an easy-to-use, clearly laid out format.
R129.90  Inc VAT
DY-8 Color Ribbon direct thermal ribbon Manual Hot Stamp Printer (DY-8 hot thermal printer)

FEATURES

  • Ideal for small scale production
  • Rugged aluminum alloy construction
  • Manually operated
  • Very easy to use, no operator training require
  • 3 line prints
  • Compactable size makes it easy to move
  • Stable printing temperature control
  • Low printing costs
  • Quick-change ribbon roll and metallic characters

   

PRINTS ON

- Plastic Bags

- Paper

- Polypropylene (PP) Film

- Polyethylene (PE) Film

- Laminated Film

   

SPECIFICATIONS

 

Printing Speed

70 Prints/ Min

Printing Size

Line 1, 13 Characters

Line 2, 13 Characters

Lines 3, 13Characters

Power Supply

220V, 50HZ

Power Consumption      

130W

Overall Size

270x160x220mm

 

Net Weigt

3.0 KGS

R3,499.90  Inc VAT
Official Raspberry Pi 3A+ Red & White Case (Pi3A+ RW case official )

Please Note: This is only the case. The Raspberry Pi and cables are not included.

The Official Raspberry Pi 3 Model A+ Case is here! Specially made and beautifully crafted, this nifty and tactile snap-together case is designed to protect your Raspberry Pi 3A+! The case is composed of two separate pieces: a base, and a removable top that enables the addition of HATs or other GPIO periphery! There's even LED lights pipes to top it all off!

Features of the Official Raspberry Pi Case

  • Fabulous Raspberry Red and White Colour Combination
  • 2 Part "Snap-Fit" Enclosure
  • Cut-outs for all connection points
  • MicroSD card cut-out
  • Plastic LED light pipes
  • Stick on rubber feet for case stability
  • Super slim design measuring: 75mm x 65mm x 20mm
R59.90  Inc VAT
Shock Absorber Stepper Motor Vibration Damper for 3D Printer Nema17 Stepper Motor (stepper damper)
Features:

Effective to reduce shock.
Antivibration dampers for mostly applied stepper motors are available.
Energy-absorbing rubber mounts with a metal mounting face.
Stepper motors are affected by resonance.
Resonance is caused by parts vibrating in concert with each other, which can be lessened by fitting a stepper motor antivibration damper.

Specifications:

Material: Alloy
Size: 3.7cm x 3.7cm /1.5 Inch x 1.5 Inch
Fit for: 3D Printer stepper motors

Package Includes:


1 x Shock Absorber
R49.90  Inc VAT
Adapter Board for Arduino & Raspberry Pi (WS ARPI600 adapter board)

Overview

Arduino is a massive ecosystem, if there's a way for the Raspberry Pi GPIO interface to adapt to Arduino pinouts, it is possible to use the Pi together with vast Arduino shields and hardware/software resources. The ARPI600 is just intended for this.

What's more, the ARPI600 also support XBee modules, make it easy to add wireless feature to your great project.

ARPI600 Features

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
  • Compatible with Arduino UNO, Leonardo, easy to connect with various Arduino shields
  • XBee connector for connecting various XBee modules
  • Sensor interface for connecting various sensors
  • Onboard USB TO UART for serial port debugging, also can be configured as XBee USB adapter
  • Onboard ADC, 10 bit, 38KSPS, 11 channels (6 channels for Arduino interface, 5 channels for sensors)
  • Onboard RTC

What's on the ARPI600



  1. Arduino connector : for connecting Arduino shields
  2. ICSP interface : Arduino ICSP
  3. XBee connector : for connecting XBee communication modules
  4. Sensor interface : for connecting sensors
  5. Raspberry Pi connector : for connecting Raspberry Pi
  6. USB TO UART
  7. TLC1543 : AD converter
  8. PCF8563 : RTC
  9. CP2102
  10. 32.768KHz crystal : for RTC
  11. Power indicator
  12. XBee state LED
  13. XBee and Arduino interface RESET button
  14. XBee EASYLINK button
  15. RTC battery holder : for CR1220 button battery
  16. TLC1543 reference voltage configuration jumper
  17. RTC jumper
  18. UART jumper
    • when connecting P_RX and CP_TX, P_TX and CP_RX respectively, USB TO UART is connected to Raspberry Pi serial port
    • when connecting XB_RX and CP_TX, XB_TX and CP_RX respectively, USB TO UART is connected to XBee serial port
    • when connecting XB_RX and P_TX, XB_TX and P_RX respectively, Raspberry Pi serial port is connected to XBee serial port
  19. Arduino AD selection jumper
    • short 2 and 3 : Arduino A0-A5 as AD input
    • short 1 and 2 : Arduino A0-A5 as digital control
  20. Arduino I2C selection jumper
    • short the jumper : Arduino A4-A5 as I2C control (the A4-A5 of Arduino AD selection jumper should be opened)
  21. Arduino SPI selection jumper
    • short 1 and 2 : Arduino D11-D13 as SPI control (default)
    • short 2 and 3 : Arduino D11-D13 as digital control


Development Resources

Wiki : www.waveshare.com/wiki/ARPI600

R269.90  Inc VAT
Pirate Audio: Headphone Amp for Raspberry Pi (Pirate Audio: Headphone)

The ultimate hackable headphone amp for your desk! Pirate Audio Headphone Amp for Raspberry Pi has an I2S DAC, headphone amplifier, high-res display, and playback control buttons.

Build your own home-brew iPod Nano with Pirate Audio Headphone Amp! It's an all-in-one solution, with gorgeous album art display, track info, and playback controls, for playing your local audio files (MP3, FLAC, etc) or streaming music from Spotify. The DAC and headphone amp give you crisp digital amplified audio through your wired headphones.

Pirate Audio is a range of all-in-one audio boards for Raspberry Pi, with high-quality digital audio, beautifully-crisp IPS displays for album art, tactile buttons for playback control, and our custom Pirate Audio software and installer to make setting it all up a breeze.

Features

  • Amplified digital audio (24-bit / 192KHz) over I2S
  • PAM8908 headphone amplifier chip (datasheet)
  • Low-gain / high-gain switch (high-gain boosts by 12dB)
  • PCM5100A DAC chip (datasheet)
  • 3.5mm stereo jack
  • 1.3" IPS colour LCD (240x240px) (ST7789 driver)
  • Four tactile buttons
  • Mini HAT-format board
  • Fully-assembled
  • Compatible with all 40-pin header Raspberry Pi models
  • Pirate Audio software
  • Dimensions: 65x30.5x9.5mm

Software

Our Pirate Audio software and installer installs the Python library for the LCD, configures the I2S audio and SPI, and then installs Mopidy and our custom Pirate Audio plugins to display album art and track info, and to use the buttons for playback control.

Here's how to get started:

  1. Set an SD card up with the latest version of Raspbian.
  2. Connect to Wi-Fi or a wired network.
  3. Open a terminal and type the following:

    git clone https://github.com/pimoroni/pirate-audio
    cd pirate-audio/mopidy
    sudo ./install.sh


  4. Reboot your Pi

You can find more detailed instructions here: https://github.com/pimoroni/pirate-audio/tree/master/mopidy

Notes

Note that our installer, linked above, does all of the below for you, but if you're an intrepid hacker then you might need to know this stuff!

  • The low-gain mode is recommended for most use-cases.
  • The DAC can be configured by adding dtoverlay=hifiberry-dac to the /boot/config.txt file.
  • There is a DAC enable pin—BCM 25— that must be driven high to enable the DAC. You can do this by adding gpio=25=op,dh to the /boot/config.txt file.
  • The buttons are active low, and connected to pins BCM 5, 6, 16, and 20
  • The display uses SPI, and you'll need to enable SPI through the Raspberry Pi configuration menu.
  • If you want to use these boards with a Pibow Coupé case (either for the Zero / Zero W or Pi 4), then you'll need to use a booster header to raise it up a little.
R369.90  Inc VAT
Pirate Audio: 3W Stereo Amp for Raspberry Pi (Pirate Audio: 3W Amp)

Bring an old radio or set of speakers into the 21st century with Pirate Audio 3W Stereo Amp for Raspberry Pi! Get punchy digital audio through the push-fit terminals and control your music with the built-in colour LCD and playback control buttons.

The push-fit connectors on Pirate Audio 3W Stereo Amp make it super-simple to connect up a set of speakers, whether they're bookshelf or floor-standing speakers, or the speakers in an old radio. Play crisp digital audio from local files (MP3, FLAC, etc.) or stream from services like Spotify. The combined DAC and amp gives you crisp 24-bit / 192KHz digital audio through your connected stereo speakers (or mixed-down mono through a single channel).

Pirate Audio is a range of all-in-one audio boards for Raspberry Pi, with high-quality digital audio, beautifully-crisp IPS displays for album art, tactile buttons for playback control, and our custom Pirate Audio software and installer to make setting it all up a breeze.

Features

  • MAX98357A DAC / amplifier chip x2 (datasheet)
  • Stereo 3W (per channel) audio out
  • Push-fit speaker terminals
  • Switch for stereo / mixed-down mono modes
  • 1.3" IPS colour LCD (240x240px) (ST7789 driver)
  • Four tactile buttons
  • Mini HAT-format board
  • Fully-assembled
  • Compatible with all 40-pin header Raspberry Pi models
  • Pirate Audio software
  • Dimensions: 65x30.5x9.5mm

Software

Our Pirate Audio software and installer installs the Python library for the LCD, configures the I2S audio and SPI, and then installs Mopidy and our custom Pirate Audio plugins to display album art and track info, and to use the buttons for playback control.

Here's how to get started:

  1. Set an SD card up with the latest version of Raspbian.
  2. Connect to Wi-Fi or a wired network.
  3. Open a terminal and type the following:

    git clone https://github.com/pimoroni/pirate-audio
    cd pirate-audio/mopidy
    sudo ./install.sh


  4. Reboot your Pi

You can find more detailed instructions here: https://github.com/pimoroni/pirate-audio/tree/master/mopidy

Notes

Note that our installer, linked above, does all of the below for you, but if you're an intrepid hacker then you might need to know this stuff!

  • The push-fit connectors require you to push gently on the tab to allow the cable to be inserted / removed. Do this carefully, to avoid breaking the clip!
  • The DAC can be configured by adding dtoverlay=hifiberry-dac to the /boot/config.txt file.
  • There is a DAC enable pin—BCM 25— that must be driven high to enable the DAC. You can do this by adding gpio=25=op,dh to the /boot/config.txt file.
  • The buttons are active low, and connected to pins BCM 5, 6, 16, and 20
  • The display uses SPI, and you'll need to enable SPI through the Raspberry Pi configuration menu.
  • If you want to use these boards with a Pibow Coupé case (either for the Zero / Zero W or Pi 4), then you'll need to use a booster header to raise it up a little.
R369.90  Inc VAT
WDLabs Enclosure & Cable Kit for Pi Zero Blue (AW WDLabs Enclosure kit Zero Blue)

While the Raspberry Pi Zero is great on its own, you still need quite a few accessories to create your favorite projects.

The WD Enclosure Kit for Pi Zero is a great expansion kit to get started with your Pi Zero. With the necessary components to easily expand USB peripherals and add mass storage to your projects, our custom-designed enclosure neatly integrates a Pi Zero and a PiDrive 314GB into a sleek, compact unit.

Please Note. Pi Zero & PiDrive Not Included.

Comes With

  • 1 Enclosure – for WD PiDrive and Raspberry Pi Zero
  • 1 USB microB right angle to USB A cable
  • 1 Mini HDMI to HDMI Adapter
  • 1 Micro USB OTG Hub
  • 1 USB Micro Power Cable
  • 1 USB Power Adapter and USB Cable (2.0A, 5V min)
  • 4 Phillips screws
  • 2 Torx screws
  • 1 Torx screwdriver

Compatible With (Not Included)

  • Raspberry Pi Zero
  • WD PiDrive or 2.5" USB HDD (7mm-15mm)
  • HDMI Cable
  • Philips screwdriver
The WD Enclosure Kit for Pi Zero is a great expansion kit to get started with your Pi Zero.
R392.41  Inc VAT
Per Page      1 - 20 of 45