Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
The JAM HAT is the perfect add-on board for learning how to code electronic hardware with the Raspberry Pi, and designed for use by beginners, schools and coding clubs in an easy-to-use, clearly laid out format.
R129.90  Inc VAT
3 Pin Plug in Screw Terminal Block Connector 5.08mm Pitch(pack of 5) (3 pin screw terminal(5))

As a connector, the terminal block is an important module in the electric industry.
It makes it easy to connect wires to your pcb.

Electrical Properties:

Rated voltage: 300V
Rated current: 16A
Contact resistance: 20mΩ
Insulation resistance: 5000MΩ/1000V
Withstanding voltage: AC1500V/1Min

Mechanical Properties:

Temp. Range: -30℃~+120℃
Max Soldering: +250℃ for 5 Sec
Torque: 0.5Nm

Specifications:

Screws: M2.5 steel Zinc plated
Contact: phosphor bronze Ni plated or stainless steel
Pin header: Brass, Tin plated
Housing: PBT, UL94V-0
Pitch: 5.08mm Poles: 3P
Color: Blue
Quantity: 5

Package includes:

5 x 3 pin Terminal Blocks
R19.90  Inc VAT
Li-ion Battery HAT for Raspberry Pi, 5V Output, Quick Charge (Battery hat zero)

Overview

The Li-ion Battery HAT integrates SW6106 power bank management chip, allows providing 5V regulated power supply to your Pi from a 14500 battery, makes the Pi becomes a portable device. It will charge the battery as well, supports bi-directional quick charge. This module can be used as a universal mini power bank, also works with other 5V devices.

Features

  • Onboard SW6106 chip, supports bi-directional quick charge, supports multi quick charge protocols like PD/QC/FCP/PE/SFCP
  • Lithium battery protection circuitry, provides reverse protection, over charge/discharge protection, over current protection, and short circuit protection
  • Onboard indicators: quick charge, warning, and power capacity

Specifications

  • Output voltage: 5V
  • Applicable battery: 3.7V 14500 lithium battery (4.2V when full charged)
  • Dimension: 65mm × 30mm
  • Mounting hole size: 3.0mm

What's on Board


  1. Raspberry Pi GPIO connector: for connecting Raspberry Pi
  2. SW6106 power management chip
  3. USB Type-C connector: battery charge/power output
  4. USB Type-A connector:power output
  5. Micro USB connector:battery charge
  6. Raspberry Pi power switch
  7. Battery warning indicator: on when the battery is reverse
  8. Battery power capacity indicator: 5x LEDs to indicate the power capacity and charging status
  9. Quick charge indicator: on when quick charging
  10. 14500 battery holder

Dimensions

Development Resources

Wiki : www.waveshare.com/wiki/Li-ion_Battery_HAT

R289.90  Inc VAT
WS Barcode Scanner Module, 1D/2D Codes Reader (WS barcode scanner)

Overview

This is a small 1D/2D codes reader, by using the intelligent image recognition algorithm, it will decode the barcode or 2D code on paper or screen, fast and accurately.

Through the onboard USB and UART interface, it can be directly plugged into a computer, or be easily integrated to kinds of devices due to its small form factor.

Features

  • Easy to use, requires no knowledges of image recognition
  • Decodes various common 1D/2D codes such as Barcode, QR code etc.
  • Onboard micro USB and UART serial port, allows to connect with computers or embedded devices
  • Configurable via scanning 'configuration code'
  • Onboard light source, works in the dark

Specifications

  • Operating voltage: 5V
  • Operating current: 135mA (scanning), 58mA (standby), 2mA (sleep)
  • Operating temperature: 0°C~60°C
  • Operating humidity: 5%~95% (Non-condensing)
  • Communication interface: UART, USB
  • Decodes 1D codes: Codebar, Code 11, Code 39/Code 93, UPC/EAN, Code 128/EAN128, Interleaved 2 of 5, Matrix 2 of 5, MSI Code, Industrial 2 of 5, GS1 Databar(RSS)
  • Decodes 2D codes: QR code, Data Matrix, PDF417
  • DOES NOT SUPPORT THE FORMAT FOR SCANNING RSA DRIVER'S LICENSE
  • Light source: white
  • Scan angels: roll 360°, skew ±65°, pitch ±60°
  • Field of view: 28° (horizontal), 21.5° (vertical)
  • Dimension: 53.3mm x 21.4mm

Development Resources

Wiki : www.waveshare.com/wiki/Barcode_Scanner_Module

R629.90  Inc VAT
WS 4G / 3G / 2G / GSM / GPRS / GNSS HAT for Raspberry Pi, LTE CAT4 (4G Hat)

Please note: The Raspberry Pi is not included

Overview

The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.

You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.

Features

  • Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B
  • Supports dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.
  • Supports GPS, BeiDou, Glonass, LBS base station positioning
  • Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
  • Onboard CP2102 USB to UART converter, for serial debugging
  • Breakout UART control pins, to connect with host boards like Arduino/STM32
  • SIM card slot, supports 1.8V/3V SIM card
  • TF card slot for storing data like files, messages, etc.
  • Onboard audio jack and audio decoder for making telephone call
  • 2x LED indicators, easy to monitor the working status
  • Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
  • Baudrate: 300bps ~ 4Mbps (default: 115200bps)
  • Autobauding baudrate: 9600bps ~ 115200bps
  • Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
  • Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Communications Specifications

 LTEWCDMA / TD-SCDMA / CDMA 2000EDGEGSM/GPRS
BandSIM7600E-H:
-- LTE-FDD B1/B3/B5/B7/B8/B20
-- LTE-TDD B38/B40/B41
SIM7600E-H:
-- UMTS/HSPA+ B1/B5/B8
GSM/GPRS/EDGE 900/1800 MHz
SIM7600CE-T:  
-- LTE-TDD B38/B39/B40/B41
-- LTE-FDD B1/B3/B8
SIM7600CE-T:
-- UMTS/HSDPA/HSPA+ B1/B8
-- TD-SCDMA B34/B39
-- CDMA 1X/EVDO BC0
Generation4G3G2.5G2G
Emitting power0.25W[email protected]
[email protected]
[email protected]
[email protected]
Data SpeedLTE CAT 4
Uplink≤50 Mbps
Downlink≤150 Mbps
UMTS
Uplink≤384Kbps
Downlink≤384Kbps
EDGE
Uplink≤236.8kbps
Downlink≤236.8kbps
GPRS
Uplink≤85.6kbps
Downlink≤85.6kbps
   HSPA+
Uplink≤5.76Mbps
Downlink≤42Mbps
      
SIM CardNormal SIM (Not Included)
Applicable RegionSIM7600E-H is mainly applicable in Southeast Asia, West Asia, Europe, Africa, SIM7600CE-T is mainly applicable in China.
Please check the supported bands according to your local service provider, select the proper one when placing order.

GNSS Specifications

  • Receiver type
    • 16-channel
    • C/A code
  • Sensitivity
    • Tracking: -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BD)
    • Cold starts: -148 dBm
  • Time-To-First-Fix (open air)
    • Cold starts: <35s
    • Hot starts: <1s
  • Accuracy
    • Position: <2.5m CEP

SMS and Audio Specifications

  • SMS
    • Supported types: MT, MO, CB, Text, PDU
    • Storage: USIM card and ME (default)
  • Audio feature
    • Supports echo cancellation
    • Supports noise reduction

Other Specifications

  • Power supply: 5V
  • Operating voltage: 5V/3.3V (configured via jumper)
  • Operating temperature: -30°C ~ 80°C
  • Storage temperature: -45°C ~ 90°C
  • Dimension: 56.21mm x 65.15mm

What's on Board

  1. SIM7600E-H
  2. CP2102 USB to UART converter
  3. NAU8810 audio decoder
  4. TXS0108EPWR voltage translator: translates 3.3V/5V into 1.8V
  5. MP2128DT power chip
  6. MP1482 power chip
  7. Raspberry Pi GPIO header: for connecting with Raspberry Pi
  8. SIM7600 control interface: for connecting with host boards like Arduino/STM32
  9. SIM card slot: supports 1.8V/3V SIM card
  10. TF card slot: allows file/SMS/... storage
  11. 3.5mm earphone/mic jack
  12. USB interface: for testing AT Commands, getting GPS positioning data, etc.
  13. USB to UART interface: for serial debugging, or login to Raspberry Pi
  14. MAIN antenna connector
  15. AUX antenna connector
  16. GNSS antenna connector
  17. Power switch
  18. Network status indicator
  19. Power indicator
  20. Operating voltage selection jumper:
    VCCIO - 3.3V: set operating voltage as 3.3V
    VCCIO - 5V: set operating voltage as 5V
  21. UART selection jumper:
    A: access Raspberry Pi via USB to UART
    B: control the SIM7600 by Raspberry Pi
    C: control the SIM7600 via USB to UART

Dimensions

Development Resources

Wiki : www.waveshare.com/wiki/SIM7600E-H_4G_HAT



R1,199.90  Inc VAT
WS Game HAT for Raspberry Pi (WS Game hat)

Overview

This Game HAT will turn your Raspberry Pi into a classic game console in a second, recalls you all the gaming pleasures in the memory.

Game HAT Features

  • 3.5inch IPS screen, 480×320 resolution
  • 60 frame experience, smoothly display, no more frame loss
  • Compatible with Raspberry Pi A+/B+/2B/3B/3B+ (Raspberry Pi Zero/Zero W/Zero WH requires another HDMI cable)
  • Integrates battery charge circuitry, powered from a 18650 lithium battery (NOT included), plays anywhere anytime
  • Battery capacity indicator
  • Onboard speaker and earphone jack, listen to the familiar BGM from the old days

Keys Introduction

  • Game function keys vary according to specific game
  • Start + Select to exit current game
  • Menu, Up/Left, Down/Right, Exit, this four keys on the bottom allow to adjust screen brightness/contrast, volume, etc.

Dimensions

Development Resources

Wiki : www.waveshare.com/wiki/Game_HAT

And just maybe you want to print your own case for this HAT: https://www.thingiverse.com/thing:3267519

R699.90  Inc VAT
Universal 5-in-1 OTG Card Reader Micro USB Type-C TF Card Reader (Type C black card reader)
Specfications:

1. Type: Card Reader 
2. Interface: Type-C(USB 3.1), USB2.0, Micro USB 
3. Supported Memory Cards: TF 
4. Maximum Memory Supported: 128GB
5. Product weight: 0.0090 kg 
6. Product size (L x W x H): 7.40 x 1.90 x 1.00 cm/2.91 x 0.75 x 0.39 inches 
7. Color: Black

Features:

1. 5 in one OTG card reader, univeral for phone,computer, type-c devices.(Your smartphone should support OTG function)
2. Strong performance, plug and play.

Package includes:

1 x Black Card Reader
R229.90  Inc VAT
Mini Type-C USB 3.1 Micro Sd Tf Card Aluminum Alloy Card Reader (Silver Type C card reader)
Specification:

Plug Type: Type-c
Material: Aluminium Alloy
Color: Sliver
Capacity: Support TF Card up to 128G

Features:

1. Type-C Card Reader: Wide compatibility, suitable for most of Type-c devices, such as mobile phone, Macbook, tablet and etc.
2. High Speed Transmission: With high performance USB 3.1 plug, and it could support TF card up to 128GB.
3. Portable: With a key ring hole.

Package includes:

1x Mini Type-C USB 3.1 Micro SD Card TF Card Reader
R219.90  Inc VAT
Standard (55°) MLX90640 Thermal Camera Breakout (55 Thermal camera std 55)

MLX90640 Thermal Camera Breakout

A sophisticated, hackable, 32x24 pixel thermal camera breakout! Use it to monitor the temperature of your CPU or coffee pot, or to build your own heat-seeking night vision camera. Works with Raspberry Pi or Arduino.

It's perfect for building into projects - industrial, scientific, or just fun - and much more affordable than most thermal cameras. Our breakout makes it easy to use the camera with your Raspberry Pi or Arduino, using I2C and 3-6V supply. And it's available in two different fields of view, 55° (standard) or 110° (wide angle) depending on your preference.

The MLX90640 far-infrared camera is an array of 768 (32x24) thermal sensors that can detect temperatures from -40 to 300°C with approximately 1°C accuracy and up to 64FPS! The applications of this camera are manifold: measure the heat or heat dissipation of devices like CPUs, circuit boards, or electrical appliances; use it to identify thermal inefficiencies in your home; or use it for presence detection to identify bodies in complete darkness.

Features

  • Melexis MLX90640 far-infrared sensor array (datasheet)
  • 32x24 pixels
  • Field of view: 55°x35° or 110°x75°
  • Up to 64FPS
  • -40 to 300°C detection with approximately 1°C accuracy
  • I2C interface (address 0x33)
  • 3.3V or 5V compatible
  • Reverse polarity protection
  • Compatible with all models of Raspberry Pi, and with certain Arduino models

Kit includes

  • MLX90640 breakout
  • 1x5 male header
  • 1x5 female right-angle header

We've designed this breakout board so that you can solder on the piece of right-angle female header and pop it straight onto the bottom left 5 pins on your Raspberry Pi's GPIO header (pins 1, 3, 5, 7, 9).

Software

We've written software in C that you can use to generate images and video from the MLX90640 cameras.

SparkFun also provide an example Arduino/Processing sketch for the MLX90640.

Our software does not support Raspbian Wheezy.

Python code

R1,199.90  Inc VAT
3D Printer 12V DC 50mm x 50mm Blow Radial Cooling Fan (12V 50x50 radial fan)
Features:

Excellent for cooling heatsinks on hot ends, prints, or other cooling needs
Made of high quality PBT+30% glass line +VO
Bearing is high precision, long life and low noise
Temperature of usage environment: -20℃ to 75℃
Working environment temperature: 40℃
Service life: Can do continuous work for 24 hours
Speed: 4500, 6500 (R/min)
Voltage: DC 12V
Size: 50 x 50 x 15mm
Structure: Sleeve bearing

You might need to do some soldering to connect to your existing fan connector.

Package includes:

1 x Cooling Fan
R59.90  Inc VAT
25A MOSFET High Power Heated Bed Expansion Power Module MOS Tube for 3D Printer (2 units) (twin Mosfet board 3d print)
Description:

This module is based on power MOSFET and will allow PID control of the heated bed (DC-DC Relays usually do not allow this)
If your total power usage is 240W, and you have a 12V power supply, that means at least 20A (20X12 = 240W) is required.
Since the controller board can only set 15A, this setting will not work. To make it work, you need this extra power module.
Under normal cooling conditions, the module found stable operation with I(Max) = 25A, and the current used should not exceed 25A.
If you plan to use a heated bed with a 3D printer that uses a 12V power supply, this module is recommended for you.

Features:
 
- Universal heated bed power expansion high power module for 3D printers.
- Can be used on Chitu motherboards and other open 3D printer motherboards.
- Helps 3D printers equipped with controller boards (up to 15A) become even more powerful.
- With this additional module, the maximum current on the board can reach 25A.

Specifications:
 
1. Colour: Black
2. Maximum current: 25A (enhanced heat dissipation)
3. Size: about 6 x 5 x 3.1cm 
4. Mounting holes: 3.2mm diameter, for M3 screws

Package Includes:

2 x
Heated bed power modules with cables

R229.07  Inc VAT
JAM HAT (LED & Buzzer Board) (JAM Hat)

Please note: Raspberry Pi is not included with this board

Buttons, buzzers and bright LEDs! If you're starting on your Raspberry Pi journey, we've got the board just for you. ModMyPi has teamed up with York Pi Jam to bring you the JAM HAT!

Each board is fully assembled, ready to plug and play, and features:

  • 6 x "Traffic Light" LEDs (2 x Red, 2 x Yellow, 2 x Green)
  • 2 x Tactile "Push to Make" Buttons
  • 1 x Buzzer/Sounder

The JAM HAT is the perfect add-on board for learning how to code electronic hardware with the Raspberry Pi, and designed for use by beginners, schools and coding clubs in an easy-to-use, clearly laid out format, with fully supported examples and code! The JAM HAT has the Pi's GPIO fully exposed, leaving you free to connect other hardware as your projects grow!

The product comes fully assembled with our push-fit "plug & play" Single Shroud Header, Socket Header, and 14mm HAT Mounting Kit, so there's no soldering required, just plug in and bleep bleep bloop, flashy flash, click click!

Features:

  • Fully Assembled - No Soldering!
  • Mounting Hardware Included
  • HAT Format
  • GPIO Exposed for External Connections
  • Works with Python or Scratch
  • Full Code Libraries & Examples Available (work in progress) at https://github.com/modmypi/Jam-HAT
  • 2 x Tactile "Push to Make" Buttons
  • 6 x "Traffic Light" LEDs (2 x Red, 2 x Yellow, 2 x Green)
  • 1 x Buzzer/Sounder


More info available about Raspberry Jam at https://projects.raspberrypi.org/en/jam/jam

The JAM HAT is the perfect add-on board for learning how to code electronic hardware with the Raspberry Pi, and designed for use by beginners, schools and coding clubs in an easy-to-use, clearly laid out format.
R129.90  Inc VAT
Ethernet Control Module With 8 CHs Relay Board For LAN WAN WEB Server RJ45 (Ethernet relay bord)
Overview:
 
This is an Ethernet Controller board based on Imatic system which is compatible with the 8 Channel relay board(included). 
Using the Controller module and the 8 Channel relay board, you can control up to 8 devices remotely on LAN or WAN. 
The Ethernet Controller board has an integrated web server. When you are in your office, you just need to open the page on your computer, pad or smartphone and control your devices eg. lights, air-conditioning or refrigerator in your home.
 
Features:
 
  • Control switches remotely together with 8 Channel relay.
  • RJ45 interface, via RJ45 telecommunications connection for network control.
  • Support for 8 Channels relay which means you can control 8 different devices at the same time.
  • Unique dual TCP connect control, corresponding with above trait, local as TCP server
  • Accepts client control, when connect to remote server as TCP client
  • Supply core module detailed information. Default IP: 192.168.1.4 port:30000       http://192.168.1.4/30000    (You can change the default IP address)
 
HTTP comments:
 
http://192.168.1.4/30000/00 : Relay-01 OFF
http://192.168.1.4/30000/01 : Relay-01 ON
http://192.168.1.4/30000/02 : Relay-02 OFF
http://192.168.1.4/30000/03 : Relay-02 ON
http://192.168.1.4/30000/04 : Relay-03 OFF
http://192.168.1.4/30000/05 : Relay-03 ON
 
 
http://192.168.1.4/30000/14 : Relay-8 OFF
http://192.168.1.4/30000/15 : Relay-8 ON
http://192.168.1.4/30000/41 : Enter
http://192.168.1.4/30000/40 : Exit
http://192.168.1.4/30000/42 : Next Page
http://192.168.1.4/30000/43 : Next Page



Package includes:

1 x Ethernet Control Module
1 x 8 CH Relay
R599.90  Inc VAT
Transparent Acrylic Case For Arduino MEGA2560 R3 Module Board(Arduino is not included) (Mega Acrylic case)
Feature:

Name: Arduino MEGA2560 R3 DIY acrylic case
Dimensions: 118 x 72 x 18mm
Weight: 72g
Material: A level acrylic
For Arduino MEGA2560 R3 Development Board only

Please Note:
Arduino Mega is not included.
Don't forget to remove the protective film from the acrylic parts.

Package includes:

1 x Transparent Acrylic case
R44.90  Inc VAT
Blue-violet Laser Goggles Safety Glasses Protective Eyewear (Laser safety goggles)
Specifications:
Brand: Eleksmaker
Material: Plastic
Item: Laser Protective Glasses
Applicable Model: 200-540nm Wavelength
Optical Density (OD): OD4+
Blue Laser Visible Light Transmission: <50%
Red Laser Visible Light Transmission: >60%

Features:
- Durable and comfortable to wear.
- Fit for 200-540nm blue-violet lasers.
- Ideal for use in most laser applications.

Package includes:
1 x Laser Safety Glasses
R89.90  Inc VAT
One Side Copper Clad 70x100x1.5mm PCB Board (Copper PCB board single side)

Specifications: 
Panel Size: 70x100x1.5mm
Thickness: 1.2mm
Layers: Single Sided
Operating Temperature: Up to 140 °C or 285°F

Package includes: 
1 x One-Sided Copper Clad PCB Board

Resources:
Introduction to soldering
Video: How to solder properly
The secrets to good soldering
R12.90  Inc VAT
10pcs 20 Degree 0.2mm Tip 3.175mm Carbide PCB Engraving Bits (10 x pcb milling bits)
Specifications:
Degree: 20°
Shank diameter: 3.175mm
Cutting edge diameter: 0.2mm
 
Features:
A pack of 10 V-shape carbide flat bottom engraving bit replacements for your CNC/PCB machine.
These long-lasting bits are made from high quality carbide for a precise and easy cutting experience.
 
Package Includes:
10 x  CNC Router Tool 
R199.90  Inc VAT
Official Raspberry Pi standard HDMI to mini HDMI Cable 1m White for Zero (Zero white mini HDMI 1m)

The Raspberry Pi Foundation Official HDMI cables are now available from PiShop! Designed to offer optimal performance and functionality from the Raspberry Pi Zero, they're gracefully branded with the Raspberry Pi logo, made with ultra high quality materials and built to a world class specification. Triple layer shielding and nickel plated contacts ensure maximum signal transfer.

The Official Raspberry Pi HDMI Cables Feature:

  • Standard HDMI Male to mini HDMI Male
  • 30/6.0 HDMI cable full 19+1pins, 30AWG, 6.0MM
  • Nickel Plated Contacts for Optimal Contact Performance, Maximum Signal Transfer and Corrosion Resistance
R44.90  Inc VAT
Creality 3D® Printer M6 Thread Nozzle Brass Pneumatic Connector Quick Joint For Extruder (3D coupler small)
Specifications:

Product configuration: 4mm x 2mm Teflon tube
Product thread: M6 thread
Product use: Extruder
Material: Brass


Package Inlcudes:

1 x Creality 3D® pneumatic Connector
R34.90  Inc VAT
4pcs Springs For 3D Printer Extruder Heated Bed (4 bed springs)
Features:

1. Super elastic
2. Nickel plating for better corrosion resistance and surface hardness

Specifications:


Wire diameter: 1.2mm
Inner diameter: 5mm
Outside diameter 7.5mm
Height: 20mm
Material: stainless steel
Circle number: 9


Package includes:

4 x Springs
R24.90  Inc VAT
Creality 3D® Extruder Back Support Plate With Pulley For CR-10 CR-10S Series 3D Printer (Base plate with wheels)
Specifications:

Item: Extruder Back Support Base Plate with wheels
Material: Metal
Color: Black
Fit for: CR-10 CR-10S Series 3D Printer


Package Includes:

1x Creality 3D® Extruder Back Support Plate With Wheels
R399.90  Inc VAT
Per Page      281 - 300 of 738