Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
PRE-ORDER is enabled while we await ICASA approval, buy now to avoid disappointment but please note, your full order will only ship after ICASA approval is confirmed.
R819.90  Inc VAT
R842.29
USB cable included
R119.90  Inc VAT
PRE-ORDER is enabled while we await ICASA approval, buy now to avoid disappointment but please note, your full order will only ship after ICASA approval is confirmed.
R679.90  Inc VAT
R704.50
PRE-ORDER is enabled while we await ICASA approval, buy now to avoid disappointment but please note, your full order will only ship after ICASA approval is confirmed.
R279.90  Inc VAT
PRE-ORDER is enabled while we await ICASA approval, buy now to avoid disappointment but please note, your full order will only ship after ICASA approval is confirmed.
R1,099.90  Inc VAT
R1,154.20
A low cost, high-performance microcontroller board built around Raspberry Pi's very own chip - the RP2040.
R69.90  Inc VAT
PRE-ORDER Raspberry Pi Zero 2 W USB Hub Kit (Zero2W Hub kit)
PRE-ORDER is enabled while we await ICASA approval, buy now to avoid disappointment but please note, your full order will only ship after ICASA approval is confirmed.

This Starter Kit is a perfect starting point to get you up and running with your RPI Zero so you can get Playing/Making/Prototyping etc ASAP.

The Kit includes:


Getting Started with Raspberry Pi

More on Raspberry Pi OS


PRE-ORDER is enabled while we await ICASA approval, buy now to avoid disappointment but please note, your full order will only ship after ICASA approval is confirmed.
R819.90  Inc VAT
R842.29
Official Raspberry Pi US Keyboard (Black/Grey) (Official black/grey keyboard)

The Official Raspberry Pi Keyboard is finally here!

This sleek and stylish keyboard from the team at Raspberry Pi includes three in-built USB 2.0 type-A ports for powering other peripherals (such as the official Raspberry Pi mouse)!

Please Note. This keyboard is available in 6 language formats: UK, US, DE, FR, ES & IT. This model is the US version as used in South Africa.


Keyboard Specification:

  • 79-key keyboard (78-key US keyboard)
  • 3 USB 2.0 type-A ports for powering other peripherals
  • Automatic keyboard language detection
  • USB type-A to micro USB type-B cable for connection
  • Compatible with all Raspberry Pi products
  • Ergonomic design for comfortable use
  • Available in Red/White and Black/Grey
R289.90  Inc VAT
ATmega328P Arduino Compatible Nano V3 Improved Version (Arduino nano)
This Arduino Nano comes with the old bootloader

Specifications:

Microcontroller Atmel ATmega328
Operating Voltage (logic level): 5V
Input Voltage (recommended): 7V ~ 12V
Input Voltage (limits): 6V ~ 20 V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 8
DC Current per I/O Pin: 40mA
Flash Memory: 32KB (ATmega328) (of which 2 KB used by bootloader)
SRAM: 2KB (ATmega328)
EEPROM: 1KB (ATmega328)
Clock Speed: 16MHz

Package includes:

1 x Arduino Compatible Improved Version Nano V3.0 with headers pre-soldered
1 x USB cable

Getting started with Arduino products
USB cable included
R119.90  Inc VAT
PRE-ORDER Raspberry Pi Zero 2 W Essentials Kit (Zero2W Ess kit)
PRE-ORDER is enabled while we await ICASA approval, buy now to avoid disappointment but please note, your full order will only ship after ICASA approval is confirmed.

This Starter Kit is a perfect starting point to get you up and running with your RPI Zero so you can get Playing/Making/Prototyping etc ASAP.

The Kit includes:


Getting Started with Raspberry Pi

More on Raspberry Pi OS


PRE-ORDER is enabled while we await ICASA approval, buy now to avoid disappointment but please note, your full order will only ship after ICASA approval is confirmed.
R679.90  Inc VAT
R704.50
Raspberry Pi Build HAT for LEGO (RPi build hat)
Read more in HackSpace magazine issue 49 at https://hackspace.raspberrypi.com/issues/49

Description:


The Raspberry Pi Build HAT combines the power of Raspberry Pi computing with LEGO® hands-on learning to enable a fun and creative learning experience for students, teachers and makers.

The Build HAT is compatible with the most recent generation of LEGO® Technic™ motors, and with sensors included in the LEGO® Education SPIKE™ Prime portfolio.

The Build HAT is the second Raspberry Pi product, after Raspberry Pi Pico, to be powered by the Raspberry Pi RP2040 microcontroller.



Specifications:

• Controls up to 4 motors and sensors.
• Powers the Raspberry Pi (when used with a suitable external PSU).
• Easy to use from Python on the Raspberry Pi.


What's in the box?

1 x Raspberry Pi Build HAT for LEGO

Build HAT Links


LEGO Links

R469.90  Inc VAT
Raspberry Pi Official Pi3/ZERO/Pico Micro USB Power Supply 5.1V 2.5A square white (Pi3 Power 2.5A square White)

Description:

This PSU supports up to 2.5A of current, so it won't let you down when powering hungry devices through your Raspberry Pi 3 Model B, Zero and Pico

Specifications:

Output

Output voltage: +5.1V DC
Minimum load current: 0.0A
Nominal load current: 2.5A
Maximum power: 12.5W
Load regulation: ±5%
Line regulation: ±2%
Ripple & noise: 120mVp-p
Rise time: 100ms maximum to regulation limits for DC outputs
Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
Protection: Short circuit protection

Overcurrent protection
Efficiency: 80.73% minimum (output current from 100%, 75%, 50%, 25%)
Output cable: 1.5m 18AWG
Output connector: mirco USB

Input
Voltage range: 100–240Vac (rated) 96–264Vac (operating)
Frequency: 50/60Hz ±3Hz
Current: 0.5A maximum
Power consumption (no load): 0.075W maximum
Inrush current: No damage shall occur and the input fuse shall not blow

WARNINGS
• This product should be operated in a well-ventilated environment.
• The connection of incompatible devices to this power supply may affect compliance, result in damage to the unit and invalidate the warranty.

SAFETY INSTRUCTIONS
To avoid malfunction or damage to this product please observe the following:
• Do not expose to water or moisture, or place on a conductive surface whilst in operation.
• Do not expose to heat from any source; this is designed for reliable operation at normal ambient room temperatures.
• Do not attempt to open or remove the power supply case.


R159.90  Inc VAT
PRE-ORDER Raspberry Pi Zero 2 W (zero 2 W board)


PRE-ORDER is enabled while we await ICASA approval, buy now to avoid disappointment but please note, your full order will only ship after ICASA approval is confirmed.


Description:


Raspberry Pi Zero 2 W is the latest product in our most affordable range of single-board computers. The successor to the breakthrough Raspberry Pi Zero W, Raspberry Pi Zero 2 W is a form factor–compatible drop-in replacement for the original board.

The board incorporates a quad-core 64-bit Arm Cortex-A53 CPU, clocked at 1GHz. At its heart is a Raspberry Pi RP3A0 system-in-package (SiP), integrating a Broadcom BCM2710A1 die with 512MB of LPDDR2 SDRAM. The upgraded processor provides Raspberry Pi Zero 2 W with 40% more single-threaded performance, and five times more multi-threaded performance, than the original single-core Raspberry Pi Zero.

Raspberry Pi Zero 2 W offers 2.4GHz 802.11 b/g/n wireless LAN and Bluetooth 4.2, along with support for Bluetooth Low Energy (BLE), and modular compliance certification.

The board has a microSD card slot, a CSI-2 camera connector, a USB On-The-Go (OTG) port, and an unpopulated footprint for a HAT-compatible 40-pin GPIO header. It is powered via a micro USB socket. Video output is via a mini HDMI port; composite video output can easily be made available via test points if needed.

Sharing the same form factor as the original Raspberry Pi Zero, Raspberry Pi Zero 2 W fits inside most existing Raspberry Pi Zero cases.



Specifications:

Form factor: 65mm × 30mm
Processor: Broadcom BCM2710A1, quad-core 64-bit SoC (Arm Cortex-A53 @ 1GHz)
Memory: 512MB LPDDR2
Connectivity:
• 2.4GHz IEEE 802.11b/g/n wireless LAN, Bluetooth 4.2, BLE, onboard antenna
• 1 × USB 2.0 interface with OTG
• HAT-compatible 40-pin I/O header footprint
• microSD card slot
• Mini HDMI port
• CSI-2 camera connector
Video:
• HDMI interface
• Composite video
Multimedia:
• H.264, MPEG-4 decode (1080p30)
• H.264 encode (1080p30)
• OpenGL ES 1.1, 2.0 graphics
Input power: 5V DC 2.5A
Operating temperature: -20°C to +70°C
Production lifetime: Raspberry Pi Zero 2 W will remain in production until at least January 2028
Compliance: For a full list of local and regional product approvals,
please visit pip.raspberrypi.com

WARNINGS
• Any external power supply used with Raspberry Pi Zero 2 W shall comply with relevant regulations and standards applicable in the country of intended use.
• This product should be operated in a well-ventilated environment, and if used inside a case, the case should not be covered.
• Whilst in use, this product should be placed on a stable, flat, non-conductive surface, and should not be contacted by conductive items.
• The connection of incompatible devices to Raspberry Pi Zero 2 W may affect compliance, result in damage to the unit, and invalidate the warranty.
• All peripherals used with this product should comply with relevant standards for the country of use and be marked accordingly to ensure that safety and performance requirements are met. These articles include but are not limited to
keyboards, monitors, and mice when used in conjunction with Raspberry Pi Zero 2 W.
• The cables and connectors of all peripherals used with this product must have adequate insulation so that relevant safety requirements are met.

SAFETY INSTRUCTIONS
To avoid malfunction or damage to this product, please observe the following:
• Do not expose to water or moisture, or place on a conductive surface whilst in operation.
• Do not expose to heat from any source; Raspberry Pi Zero 2 W is designed for reliable operation at normal ambient temperatures.
• Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board and connectors.
• Whilst it is powered, avoid handling
PRE-ORDER is enabled while we await ICASA approval, buy now to avoid disappointment but please note, your full order will only ship after ICASA approval is confirmed.
R279.90  Inc VAT
Official Raspberry Pi USB A male to Micro B 1M (Red 1m micro usb cable)

Description:

The USB to Micro USB Cable is 1m long manufactured by Raspberry Pi. This cable can be used in conjunction with a USB mains charger or Computer USB port to power your Raspberry Pi.

Specifications:

  • 1m Long
  • Colour: Red
  • Connector Type A: USB 
  • Connector Type B: Micro USB

Contents:

  • 1 x USB A male to USB micro B male 1m
R24.90  Inc VAT
RP2040-Plus Pico-like MCU Board Based on Raspberry Pi MCU RP2040 Plus version with pre-soldered headers (WS RP2040-PLUS WH)
RP2040 MCU Board Plus with pre-soldered headers, a Pico-like MCU board based on Raspberry Pi RP2040. Compatible with most of the Raspberry Pi Pico add-on modules.


Board specifications

Need more Flash for Raspberry Pi Pico? Dislike the outdated Micro USB connector? All these problems are solved by our RP2040-Plus now.

Same as Raspberry Pi Pico, it incorporates the RP2040 microcontroller, with dual-core Arm Cortex M0+ processor running up to 133 MHz, and 26x multi-function GPIO pins.

What's different, it features onboard 4MB Flash, USB-C connector, recharge header, and higher current DC-DC chip.

Key features include:

  •     RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
  •     Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
  •     264KB of SRAM, and 4MB of on-board Flash memory
  •     USB-C connector, keeps it up to date, easier to use
  •     Lithium battery recharge/discharge header, suitable for mobile devices
  •     Onboard DC-DC chip TPS63000, high efficiency DC-DC buck-boost chip, 1.8A current switch
  •     Castellated module allows soldering direct to carrier boards
  •     USB 1.1 with device and host support
  •     Low-power sleep and dormant modes
  •     Drag-and-drop programming using mass storage over USB
  •     26 × multi-function GPIO pins
  •     2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
  •     Accurate clock and timer on-chip
  •     Temperature sensor
  •     Accelerated floating-point libraries on-chip
  •     8 × Programmable I/O (PIO) state machines for custom peripheral support
C/C++,MicroPython support

Comprehensive SDK, dev resources, tutorials to help you easily get started



26 × multi-function GPIO pins

configurable pin function, allows flexible development and integration 



What's On Board?



  1. LED user LED (not power indicator)
  2. ETA6096 high efficiency Lithium battery recharge manager
  3. TPS63000 high efficiency DC-DC buck-boost chip
  4. USB Type-C connector
  5. BOOT button press it when resetting to enter download mode
  6. W25Q32JVSSIQ 4MB NOR-Flash
  7. RESET button
  1. RP2040 dual-core processor, up to 133MHz operating frequency
  2. Battery header MX1.25 header, for 3.7V Lithium battery, allows recharging the battery and powering the board at the same time
  3. Pinout compatible with Raspberry Pi Pico
  4. USB test points connecting to USB interface
  5. BOOT test point connecting to BOOT button
  6. DEBUG points
outline dimensions



Wiki: RP2040-Plus

What's in the box?

1 x WS RP2040-Plus WH
R189.90  Inc VAT
PRE-ORDER Raspberry Pi Zero 2 W All In One Kit (Zero2W All in one kit)
PRE-ORDER is enabled while we await ICASA approval, buy now to avoid disappointment but please note, your full order will only ship after ICASA approval is confirmed.

This Starter Kit is a perfect starting point to get you up and running with your RPI Zero so you can get Playing/Making/Prototyping etc ASAP.

The Kit includes:

Getting Started with Raspberry Pi

More on Raspberry Pi OS


PRE-ORDER is enabled while we await ICASA approval, buy now to avoid disappointment but please note, your full order will only ship after ICASA approval is confirmed.
R1,099.90  Inc VAT
R1,154.20
Raspberry Pi Power over Ethernet Plus (POE+) HAT (RPi POE+ HAT)
Overview

The Raspberry Pi PoE+ HAT is an add-on board for Raspberry Pi computers with
PoE pins, including Raspberry Pi 3B+ and Raspberry Pi 4. It is used to power
Raspberry Pi via an Ethernet cable, provided that power-sourcing equipment is
installed on the Ethernet network. The HAT also includes a fan that will cool the
Raspberry Pi processor.

Specifications

Standard: IEEE 802.3at-2003 PoE
Input voltage: 37–57 V DC, Class 4 device
Output power: 5 V DC/4 A
Cooling: 25 mm × 25 mm brushless fan delivering 2.2 CFM for processor cooling

Features:
  • Fully isolated switched-mode power supply
  • Fan control

Operating temperature: 0 °C to +50 °C
Production lifetime: The Raspberry Pi PoE+ HAT will remain in production until at least January 2027
Compliance: For a full list of local and regional product approvals, please visit www.raspberrypi.org/compliance

Physical specifications


WARNINGS

• This product shall only be connected to a Raspberry Pi via the four PoE pins.
• Any external power-sourcing equipment/power injector used to enable an Ethernet network shall comply with relevant regulations and standards applicable in the country of intended use.
• This product should be operated in a well ventilated environment, and if used inside a case, the case should not be covered.
• The connection of incompatible devices to the GPIO connection of a Raspberry Pi computer may affect compliance and result in damage to the unit and invalidate the warranty.
• All peripherals used with this product should comply with relevant standards for the country of
use and be marked accordingly to ensure that safety and performance requirements are met.
These articles include but are not limited to keyboards, monitors and mice when used in conjunction with Raspberry Pi computers.
• Where peripherals are connected that do not include the cable or connector, the cable or connector must offer adequate insulation and operation in order that the relevant performance and safety requirements are met.


SAFETY INSTRUCTIONS

To avoid malfunction or damage to this product, please observe the following:
• Do not expose to water or moisture, or place on a conductive surface whilst in operation.
• Do not expose to heat from any source. Raspberry Pi computers and the Raspberry Pi PoE+ HAT are designed for reliable operation at normal ambient room temperatures.
• Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board
and connectors.
• Avoid handling the printed circuit board whilst it is powered, and handle it only by the edges to minimise the risk of electrostatic discharge damage.
R409.90  Inc VAT
UNO R3 MEGA328P ATMEGA16U2 for Arduino Compatible (Uno Board DIP IC)

Arduino is an open-source electronics platform based on easy-to-use hardware and software. Arduino boards are able to read inputs - light on a sensor, a finger on a button, or a Twitter message - and turn it into an output - activating a motor, turning on an LED, publishing something online.

Find more info on Arduino at https://www.arduino.cc/en/guide/introduction

Description:

 Microcontroller ATmega328
Operating Voltage 5V
Input Voltage (recommended) 7-12V
Input Voltage (limits) 6-20V
Digital I/O Pins 14 (of which 6 provide PWM output)
Analog Input Pins 6
DC Current per I/O Pin 40 mA
DC Current for 3.3V Pin 50 mA
Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader
SRAM 2 KB (ATmega328)
EEPROM 1 KB (ATmega328)
Clock Speed 16 MHz
Length 68.6 mm
Width 53.4 mm

Package includes:

1 x UNO R3
1 x USB cable


R199.90  Inc VAT
R234.90
RP2040-LCD-0.96 Pico-like MCU Board Based on Raspberry Pi MCU RP2040 with LCD and pre-soldered headers (WS RP2040-LCD WH)
RP2040 MCU Board with LCD, a Pico-like MCU board based on Raspberry Pi RP2040 with pre-soldered headers. Compatible with most of the Raspberry Pi Pico add-on modules.


Board specifications

RP2040-LCD-0.96 is a low-cost, high-performance Pico-like MCU board with flexible digital interfaces. It incorporates Raspberry Pi's RP2040 microcontroller chip, as same as the one on Raspberry Pi Pico. For software development, either Raspberry Pi's C/C++ SDK, or the MicroPython is available, which makes it easy for you to get started, and integrate it into end products quickly.

In additional, there'rs also onboard 0.96inch IPS display, Lithium battery recharge/discharge header, and high efficiency DC-DC buck-boost chip.

Key features include:

  •     RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
  •     Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
  •     264KB of SRAM, and 2MB of on-board Flash memory
  •     USB-C connector, keeps it up to date, easier to use
  •     0.96inch 160×80 pixels 65K colorful IPS LCD display
  •     Lithium battery recharge/discharge header, suitable for mobile devices
  •     Onboard DC-DC chip TPS63000, high efficiency DC-DC buck-boost chip, 1.8A current switch
  •     Castellated module allows soldering direct to carrier boards (there should be dedicated cut-out for embedding the bottom components)
  •     USB 1.1 with device and host support
  •     Low-power sleep and dormant modes
  •     Drag-and-drop programming using mass storage over USB
  •     26 × multi-function GPIO pins
  •     2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
  •     Accurate clock and timer on-chip
  •     Temperature sensor
  •     Accelerated floating-point libraries on-chip
  •     8 × Programmable I/O (PIO) state machines for custom peripheral support
C/C++,MicroPython support

Comprehensive SDK, dev resources, tutorials to help you easily get started


Pico-like lcd code found at : 
sudo apt-get install p7zip-full
cd ~
sudo wget  https://www.waveshare.com/w/upload/7/74/Pico_LCD_code.7z
7z x Pico_LCD_code.7z -o./Pico_LCD_code
cd ~/Pico_LCD_code
cd c/build/



26 × multi-function GPIO pins

configurable pin function, allows flexible development and integration 



What's On Board



  1. USB Type-C connector
  2. BOOT button press it when resetting to enter download mode
  3. RESET button
  4. 0.96inch IPS LCD display 160 × 80 pixels, 65K colorful
  5. Battery header MX1.25 header, for 3.7V Lithium battery, allows recharging the battery and powering the board at the same time
  6. TPS63000 high efficiency DC-DC buck-boost chip
  1. ETA6096 high efficiency Lithium battery recharge manager
  2. RP2040 dual-core processor, up to 133MHz operating frequency
  3. W25Q16JVUXIQ 2MB NOR-Flash
  4. DEBUG points
  5. Pinout
outline dimensions



Wiki: RP2040-LCD-0.96

What's in the box?

1 x RP2040-LCD with pre-soldered headers
R279.90  Inc VAT
Raspberry Pi Pico Maker kit 1 (Pico maker kit 1)

This Starter Kit is based around the Raspberry Pi Pico development board which features the Raspberry Pi RP2040 microcontroller chip.

Whats in the box:


Add wifi to Pico using Cricket
https://www.thingsonedge.com/post/pico-cricket-blynk-phone-alerts





R127.70  Inc VAT
Raspberry Pi Pico (RPi Pico board)

https://www.raspberrypi.org/blog/raspberry-pi-silicon-pico-now-on-sale/

https://www.raspberrypi.org/products/raspberry-pi-pico/

https://www.youtube.com/watch?v=ZY-HrRGCQ4w

Add wifi to Pico using Cricket
https://www.thingsonedge.com/post/pico-cricket-blynk-phone-alerts

YouTube video on Pico by Jeff Geerling

Raspberry Pi Pico, a microcontroller board built on silicon designed here at Raspberry Pi.

Whether you choose to use our C/C++ SDK, or the official MicroPython port, everything you need to get started is here. You’ll also find links to the technical documentation for both the Raspberry Pi Pico microcontroller board and our RP2040 microcontroller chip.



Board Specifications

  • RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
  • Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz
  • 264kB of SRAM, and 2MB of on-board Flash memory
  • Castellated module allows soldering direct to carrier boards
  • USB 1.1 Host and Device support
  • Low-power sleep and dormant modes
  • Drag & drop programming using mass storage over USB
  • 26 multi-function GPIO pins
  • 2×SPI, 2×I2C, 2×UART, 3×12-bit ADC, 16×controllable PWM channels
  • Accurate clock and timer on-chip
  • Temperature sensor
  • Accelerated floating point libraries on-chip
  • 8×Programmable IO (PIO) state machines for custom peripheral support


Download Pinout Diagram


Documentation

Documentation for the Raspberry Pi Pico board and the RP2040 microcontroller:

The API level Doxygen documentation for the Raspberry Pi Pico C/C++ SDK is available as a micro-site.

While Raspberry Pi Pico does not come with anything soldered to its pads, we will recommend that users fit 2.54mm pitch male pin strip headers.


A low cost, high-performance microcontroller board built around Raspberry Pi's very own chip - the RP2040.
R69.90  Inc VAT
The Official Raspberry Pi Beginners Guide 4th Edition (RPi beginner guide 4th)

Fully updated for Raspberry Pi 400, Raspberry Pi 4, and the latest software, this 252-page official Raspberry Pi book is crammed with projects and beginner’s guides containing all the information you need to get started using your new computer!

Learn how to set up your Raspberry Pi, install an operating system, and start using it. Follow step-by-step guides to code your own animations and games, using both the Scratch 3 and Python languages. Create amazing projects by connecting electronic components to Raspberry Pi’s GPIO pins. Plus much, much more!


• Set up your Raspberry Pi, install its operating system, and start using this fully functional computer.
• Start coding projects, with step-by-step guides using the Scratch 3 and Python programming languages.
• Experiment with connecting electronic components and have fun creating amazing projects.


R159.90  Inc VAT
Sandisk 16GB uSD preloaded with Raspberry Pi OS card in jewel case with SD Adapter (SAN RPi OS Jewel 16GB uSD)

Description

16GB Sandisk Micro SD card preinstalled with the Raspberry Pi OS. Perfect for both the Raspberry Pi 4 Model B, Raspberry Pi 3 or Raspberry Pi Zero.

  • This is the hard drive and operating system for your Raspberry Pi
  • Extended partition to make full use of the SD card
  • Ready to use – plug it in and you’re ready to go
  • Only the most current stable release of the operating system will be used
  • High quality MicroSD card

Latest image and tools are available from the Raspberry Pi Foundation Downloads
R129.90  Inc VAT
Panasonic A1 32GB uSD card preloaded with Raspberry Pi OS (PAN RPi OS A1 uSD 32GB)

Description

16GB, 32GB or 64GB Panasonic Class 10 A1 Micro SD card preinstalled with the Raspberry Pi OS. Perfect for both the Raspberry Pi 4 Model B, Raspberry Pi 3 or Raspberry Pi Zero.

  • This is the hard drive and operating system for your Raspberry Pi
  • Extended partition to make full use of the SD card
  • Ready to use – plug it in and you’re ready to go
  • Only the most current stable release of the operating system will be used
  • High quality MicroSD card

Latest image and tools available from the Raspberry Pi Foundation Downloads
R139.90  Inc VAT
Raspberry Pi4 Official USB-C 15.3W power supply White 5.1V 3A (Pi4 3A power white)

The official Raspberry Pi USB-C power supply is designed to power the latest Raspberry Pi 4 Model B computers, which were released in June 2019.
Featuring a captive USB-C cable, the power supply is available in four different models to suit different international power sockets, and in two colours, white and black.

If you need to use the power supply for an earlier model RPi or the zero you'll need a type C to micro B adapter than you will find at https://www.pishop.co.za/store/rpi-power/usb-type-c-female-to-micro-usb-male-adapter

Specifications

Output
  • Output voltage: +5.1V DC
  • Minimum load current: 0A
  • Nominal load current: 3.0A
  • Maximum power: 15.3W
  • Load regulation: ±5%
  • Line regulation: ±2%
  • Ripple & noise: 120mVp-p
  • Rise time: 100ms maximum to regulation limits for DC outputs
  • Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
  • Protection: Short circuit protection, Overcurrent protection, Over temperature protection
  • Efficiency: 81% minimum (output current from 100%,75%, 50%, 25%)72% minimum at 10% load
  • Output cable: 1.5m 18AWG
  • Output connector: USB Type-C


Input
  • Voltage range: 100-240Vac (rated)
  • 96-264Vac (operating)
  • Frequency: 50/60Hz ±3Hz
  • Current: 0.5A maximum
  • Power consumption (no load): 0.075W maximum
  • Inrush current: No damage shall occur and the input fuse shall not blow
Case material
UL94V-1

AC pin material
Brass (NI plated)

WARNINGS
• This product should be operated in a well-ventilated environment.
• The connection of incompatible devices to this power supply may affect compliance, result in damage to the unit and invalidate the warranty.

SAFETY INSTRUCTIONS
To avoid malfunction or damage to this product please observe the following:
• Do not expose to water or moisture, or place on a conductive surface whilst in operation.
• Do not expose to heat from any source; this is designed for reliable operation at normal ambient room temperatures.
• Do not attempt to open or remove the power supply case.
R169.90  Inc VAT
Raspberry Pi4 Official USB-C 15.3W power supply Black 5.1V 3A (Pi4 3A power black)

The official Raspberry Pi USB-C power supply is designed to power the latest Raspberry Pi 4 Model B computers, which were released in June 2019.
Featuring a captive USB-C cable, the power supply is available in four different models to suit different international power sockets, and in two colours, white and black.

If you need to use the power supply for an earlier model RPi or the zero you'll need a type C to micro B adapter than you will find at https://www.pishop.co.za/store/rpi-power/black-usb-type-c-female-to-micro-usb-male-adapter

Specifications

Output
  • Output voltage: +5.1V DC
  • Minimum load current: 0A
  • Nominal load current: 3.0A
  • Maximum power: 15.3W
  • Load regulation: ±5%
  • Line regulation: ±2%
  • Ripple & noise: 120mVp-p
  • Rise time: 100ms maximum to regulation limits for DC outputs
  • Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
  • Protection: Short circuit protection, Overcurrent protection, Over temperature protection
  • Efficiency: 81% minimum (output current from 100%,75%, 50%, 25%)72% minimum at 10% load
  • Output cable: 1.5m 18AWG
  • Output connector: USB Type-C


Input
  • Voltage range: 100-240Vac (rated)
  • 96-264Vac (operating)
  • Frequency: 50/60Hz ±3Hz
  • Current: 0.5A maximum
  • Power consumption (no load): 0.075W maximum
  • Inrush current: No damage shall occur and the input fuse shall not blow
Case material
UL94V-1

AC pin material
Brass (NI plated)

WARNINGS
• This product should be operated in a well-ventilated environment.
• The connection of incompatible devices to this power supply may affect compliance, result in damage to the unit and invalidate the warranty.

SAFETY INSTRUCTIONS
To avoid malfunction or damage to this product please observe the following:
• Do not expose to water or moisture, or place on a conductive surface whilst in operation.
• Do not expose to heat from any source; this is designed for reliable operation at normal ambient room temperatures.
• Do not attempt to open or remove the power supply case.
R169.90  Inc VAT
Per Page      21 - 40 of 796