Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
Dedicated 40-Pin Rainbow Female to Female ribbon Cable for Raspberry Pi (20cm) (40 pin ribbon F2F)

Description:

Raspberry pi 40 pin Female to female flat ribbon cable specifically designed to fit directly onto the GPIO Headers pins of the Raspberry Pi.

Specifications:

  • 40 pin
  • Female to female
  • GPIO Header connector
  • 20cm long

Contents:

1 x Female to Female ribbon Cable
R59.90  Inc VAT
Solderless 400 Point Breadboard (breadboard 400)

Description:

400 Point solderless breadboard. Perfect for solderless electronic projects.

Specifications:

  • 400 tie points total: 300 tie-point IC-circuit area plus two 50 tie-point distribution strips providing 4 power rails.
  • White ABS plastic body with black printed legend.
  • Color legend on distribution strips.
  • Size: 3.3 x 2.1 x 0.3in (84 x 54.3 x 8.5mm).
  • Peelable adhesive tape backing provided for attaching to a surface.

Contents:

  • 1 x 400 Point Breadboard

Resources:

R38.90  Inc VAT
Jumper Cables Female to Female Ribbon of 40 x 300mm (female to female jumpers 30cm)

Description:

Female to Female Jumper Wire Cable Line Multicolored 300mm

Specifications:

  • Multicolored
  • 300mm
  • Female to Female

Contents:

  • 1 x Ribbon of 40 lines

Resources:

R29.90  Inc VAT
Piezo Transducer - Mini 5V Buzzer (4000Hz) (buzzer pcb 5V)

Description:

If you want to add beeps, tones or alerts to your Raspberry Pi project, you require a Piezo Buzzer! This mini transducer is small but loud, and can be driven with a 1-20V peak-to-peak square wave. To use, connect one pin to ground (either one) and the other pin to a square wave out from a timer or microcontroller. For the loudest tones, stay around 4 KHz. For extra loudness, you can connect both pins to a microcontroller and swap which pin is high or low ('differential drive') for double the volume.

This one plops perfectly into a breadboard and has short legs, so can also easily be mounted on a PCB!

Please Note. This item is externally driven, e.g. requires a microcontroller to produce a tone.

Specifications:

This Mini Piezo Transducer Features:

  •     Mini 5V Piezo Transducer
  •     PCB & Breadboard Mountable
  •     Low Power Consumption
  •     Sealed Base
  •     Wave Solderable and Washable

 Technical Specification:

  •     Rated Voltage (Vp-p Square Wave) 5Vp-p
  •     Operating Voltage 1 to 20Vp-p
  •     Rated Current at Rated Voltage 1mA
  •     Sound Output at 4000Hz at 10cm, at Rated Voltage ≥80dB
  •     Resonant Frequency 4000 ±500Hz
  •     Operating Temperature -20 to +70°C
  •     Storage Temperature -30 to +80°C
  •     External Diameter: 13.8mm
  •     External Height: 6.8mm
  •     Capacitance: 0.013µF
  •     Capacitance Max: 16.9nF
  •     Weight: 1g
  •     Model No.: ABT-402-RC

Contents:

  • 1 x Mini 5V Buzzer

Resources:

  • Using a Buzzer with a Raspberry Pi
R4.90  Inc VAT
10mm Spacer for Modular Raspberry Pi Case - Black (modular spacers black)

Description

The Modular Raspberry Pi Case is designed to be fully customisable by the user, and adaptable to suit a range of requirements. The streamlined look and adaptability make it perfect for many applications.

These spacers increase the internal height of the case by 10mm per spacer and can be stacked to increase the headroom further e.g. 2 spacers would be 20mm extra. Up to 5 spacers can be used, using longer screws if the case needs to be secured.

The spacers are compatible with both our Raspberry Pi 2/3 Modular case  and the new Raspberry Pi 4 version.

10mm Stackable Spacers Features

- Spacers raise the internal height by 10mm enabling the case to grow with your project
- Spacers can be stacked, increasing the internal height by up to 50mm

Screw Size Guide

Depending on the number of spacers required, the length of the screw required will change.

Below is a table showing the use of up to 5 spacers with corresponding screw lengths. We currently stock 3 screw lengths which are linked below.

Screws types compatible with spacers plates are both No.4 (US) and M3 (UK/EU). 


No. of SpacersScrew Length Required (mm)
028 (Included with Case)
138
248
358
468
578

 

 

R49.90  Inc VAT
USB A to USB B cable 1.8m for Arduino (USB A to USB B(Arduino))

Specification

1.USB 2.0 specification
2.Connector: USB 2.0-A male > USB 2.0-B male
3.Cable length: 1.8m
4.For use with Arduino

R34.90  Inc VAT
2WD Robot Car Chassis Kit single (2WD robot chassis)
Features:

Mechanical structure is simple, it is easy to build.
Can be used for distance measurement, velocity.
Can use with other modules to function as tracing, obstacle avoidance, distance testing, speed testing, wireless remote control.




Specifications:

For Motors:
VoltageDC 3VDC6VDC 7.2V
Current160mA220mA250mA
No-load Speed120 rpm/min200 rpm/min250 rpm/min
Load Speed100 rpm/min175 rpm/min210 rpm/min
Torque0.45 kg.cm1.0 kg.cm1.5 kg.cm
Reduction Ratio1:48
Noise≤65dB
Motor Size65mm x 18mm x 22mm(L*W*H)

For Smart Car:
Voltage3~9VDrive Mode2WD
Current600mAChassis Thickness3mm
Load≤2kgCar Weight285g
Speed0.6 m/sChassis Size135mm x 80mm


Package includes:

1 x DIY robot car kit

Read the Docs
R129.90  Inc VAT
SanDisk Ultra Fit USB 3.1 Flash Drive 16GB (Sandisk flash fit 16GB)

Add Space, Fast. Just Plug It In.
The simple way to add extra, high-speed storage to your device! The SanDisk Ultra Fit™ USB 3.1 Flash Drive delivers performance that lets you move a full-length movie up to +-15x faster than with standard USB 2.0 drives. Plus, thanks to its compact, streamlined design, you can plug it in and leave it in.

Compact plug-and-stay design
This compact flash drive is designed as plug-and-stay storage for laptops, tablets, TVs, gaming consoles, car audio systems, and more. Plug it in, and you’ve got instant storage that’s always on board!

High-speed USB 3.1 performance
Transfer files quickly with 130MB/s read speed. With write speeds up to 15x faster than standard USB 2.0 drives, you can move a full-length movie to the drive in less than 30 seconds.

SanDisk SecureAccess® software helps protect your privacy
Create a private folder on your drive with SanDisk SecureAccess software. This 128-bit AES encryption software makes it easy to password-protect critical files. Drag and drop files into the vault, and they'll be encrypted.

Full Specifications

Interface: USB 3.1 Gen 1
Connector: USB-A
Compatibility: USB 3.1 (backward compatible with USB 3.0 and USB 2.0)
Sequential Read Performance: Up to 130MB/s
Dimensions: 29.8mm x 14.3mm x 5mm

What's in the box?

1 x USB flash drive

Datasheet

Disclosures

  1. 32GB, 64GB, 128GB, 256GB, 512GB: Write up to 15X faster than standard USB 2.0 drives (4MB/s), read speeds up to 130MB/s. 16GB: Write faster than standard USB 2.0 drives (4MB/s); read speeds up to 130MB/s. USB 3.1 Gen 1 or USB 3.0 port required. Based on internal testing; performance may be lower depending on host device. 1MB=1,000,000 bytes. 
  2. Password protection uses 128-bit AES encryption and is supported by Windows® 7, Windows 8, Windows 10 and Mac® OS X® v10.9+ (Software download required for Mac, see www.SanDisk.com/SecureAccess). FOR USE IN CHINA:  Password protection is supported by Windows® 7, Windows 8, Windows 10 and Mac® OS X® v10.9+ (Software download required for Mac, see www.SanDisk.com/SecureAccess)
  3. Based on 1.2GB MPEG-4 video transfer to drive with USB 3.1 Gen 1 or USB 3.0 host device. Results may vary based on host device, file attributes, and other factors. 
  4. Registration required; terms and conditions apply.
  5. 1 GB=1,000,000,000 bytes. Actual user storage less. 
R119.90  Inc VAT
TT-02 DIY Car Model TT Motor w/ Wheel - Black + Yellow (robot wheel and motor)
Quantity 1 Piece(s)/pack
Color Yellow + black
Material ABS + iron
Compatible Models Robot, gun toy, four wheel drive toy, aircraft toy, vibration products
Other Feature Motor speed: 100 per minutes; Torque: 4.5kg. cm1; Voltage: 3~6V; Non-loaded revolving speed: 100RPM; Non-loaded current: 60mA; Torque (6V): 4500mg cm
Packing List 1 x Motor
1 x Wheel
R69.90  Inc VAT
SG90 Universal 9g Servo Motors w/ Accessories for R/C Robot / Helicopter - Blue + Yellow (sg90 servo blue)

Specifications

  • Product: SG90 Servo
  • Torque: 2.0kg/cm(4.8V), 2.2kg/cm(6V)
  • Speed: 0.09s/60°(4.8V), 0.08s/60°(6V)
  • Rotate angle: 180°
  • Operating voltage: 4.8 ~ 6V
  • Gear: plastic
  • Dead band: 7us
  • Weight: 10.5g
  • Dimension: 22.8mm × 12.2mm × 28.5mm


ExplainingComputers has a great video on using this servo https://www.youtube.com/watch?v=xHDT4CwjUQE&t=389s

How to set up SG90 Servo Motor on Raspberry Pi

R34.90  Inc VAT
2-Axis FPV Camera Cradle Head w/ 9g Dual Servo / Steering Gear for Robot / R/C Car - Black + Blue (cam pan/tilt bracket)
You'll have to know how to control this unit from you GPIO port or a servo controller module(Not included).

Specially designed for R/C car and robotics; Can be pan/tilt 180 degrees; Can hold ultrasonic sensor, IR sensor, camera or other sensors.

- Weight: 15g

- Working torque: 1.6KG/cm

- Response rotary speed: 0.10s / 60 degree

- Working temperature: -30~60'C

- Dead zone: 2ms

- Plug: JR, Futaba

- Rotating angle: Max. 180 degree

- Servo: digital servo

- Working current: 0.02A

- Working voltage: 3.5~6V

- Structure: Nylon + plastic gear

Packing List
1 x Cradle head w/ servo (25.6+/-2cm)
1 x Pack of screws
R209.90  Inc VAT
Kawau C296 USB SD & Micro SD Card Reader (512GB) (card reader Kawau)

Need a high quality SD & Micro SD card reader/writer that can handle SD card sizes up to 512GB? We've found one! The Kawau C296 2 in 1 USB card reader features two slots, one for a standard size SD card, and one for Micro SD cards. It uses USB 2.0, with transfer speeds up to 480Mbps, and it's plug and play! A lot of cheaper SD card readers will not read cards above 32GB (or even 16GB on some of the really cheap ones), but never fear! You can now future proof your SD card library, safe in the knowledge that your Kawau SD card reader can take cards up to 512GB's!

Supports SD, SDHC, SDXC, MMC, Exteme SD, Mini SD, Micro SD, Micro SDXC, Micro SDHC Memory Cards, in addition to the latest format UHS cards.

Technical Details

  • Brand: Kawau
  • Model: C296
  • Compatible Cards:
    • SD
    • SDHC
    • SDXC
    • MMC
    • Extreme SD
    • Mini SD
    • Micro SD
    • Micro SDXC
    • Micro SDHC
    • UHS
  • Supports Card Sizes:
    • 4GB
    • 8GB
    • 16GB
    • 32GB
    • 64GB
    • 128GB
    • 256GB
    • 512GB
  • Colour: Black
  • Blue Transfer Light
  • Supports up to 512GB
  • Size: 60 x 17 x 8.5 mm
  • Weight: 16.05 g
R79.90  Inc VAT
GPIO Reference Board (Model B+,A+,2B and 3B) (gpio ref 40pin board)

RASPBERRY PI NOT INCLUDED(Neither the key-ring and keys for those who wondered)

This cute little GPIO reference board from allows you to quickly and easily distinguish between the different pins of the Raspberry Pi Model B+, Raspberry Pi 2B, Pi 3B and Pi 3B+. It's even got a key chain hole, so you can carry it around and keep it handy - you'll never know when you need to hack a Pi!

The GPIO reference board features BCM numbering on one side and the pin names on the other. It can be soldered for permanent referencing, or slipped on and off when required.

Dimensions:
 
Width = 67mm
Height = 19mm
Thickness = 0.8mm

On the RPi3 and later you'll have to snip off a little bit of the corner closest to pin 39 thanks to the new POE pins on the board
R32.90  Inc VAT
Raspberry Pi 7" Touchscreen Display (Official) (display 7 official)

The display will technically work with the Model A and Model B boards (connecting it to the DSI port on the Pi board), however the mounting holes on the back of the display will only line up with the newer board design (A+, B+, Pi2, Pi3 and Pi4)

The eagerly awaited 7" Official Raspberry Pi Touchscreen Display is finally hear! Boasting a neat 800×480 display @ 60fps resolution, and 10 point capacitive touchscreen, this 7" screen for the Raspberry Pi gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems and embedded projects.

The 800x 480 display connects via an adapter board which handles power and signal conversion.Only two connections to the Pi are required; power from the Pi’s GPIO port and a ribbon cable that connects to the DSI port present on all Raspberry Pi’s. Touchscreen drivers with support for 10-finger touch and an on-screen keyboard are available on the latest Raspbian OS for full functionality without a physical keyboard or mouse.

  • Turn your Raspberry Pi into a touchscreen tablet, infotainment system, or standalone device.
  • Truly Interactive - the latest software drivers will support a virtual ‘on screen’ keyboard, so there is no need to plug in a keyboard and mouse.
  • Make your own ‘Internet of Things’ (IoT) devices including a visual display. Simply connect your Raspberry Pi, develop a Python script to interact with the display, and you’re ready to create your own home automation devices with touchscreen capability.
  • A range of educational software and programs available on the Raspberry Pi will be touch enabled, making learning and programming easier on the Raspberry Pi.
  • Raspberry Pi mounting points on the back

Technical Specification:

  • 7” Touchscreen Display.
  • Screen Dimensions: 194mm x 110mm x 20mm (including standoffs)
  • Viewable screen size: 155mm x 86mm
  • Screen Resolution 800 x 480 pixels
  • 10 finger capacitive touch.
  • Connects to the Raspberry Pi board using a ribbon cable connected to the DSI port.
  • Adapter board is used to power the display and convert the parallel signals from the display to the serial (DSI) port on the Raspberry Pi.

N.B. Will require the latest version of Raspbian OS to operate correctly.

Kit Contents:

  • 7” Touchscreen Display
  • Adapter Board
  • DSI Ribbon cable
  • 4 x stand-offs and screws (used to mount the adapter board and Raspberry Pi board to the back of the display
  • 4 x jumper wires (used to connect the power from the Adapter Board and the GPIO pins on the Pi so the 2Amp power is shared across both units)

Please Note. The Raspberry Pi Board and accessories are not included in this kit.

Installation instructions can be found at:
http://www.element14.com/community/docs/DOC-78156?ICID=rpimain-touchscreen-7inban#installI
 

R1,369.02  Inc VAT
ModMyPi Modular RPi3 Case - USB/HDMI Cover (White) (AW mod hdmi cover white)
MODULAR CASE NOT INCLUDED

The Modular Raspberry Pi Case is designed to be fully customisable by the user, and adaptable to suit a range of requirements. The streamlined look, and adaptability makes it perfect for many applications, including: the hobbyist maker, digital signage, industrial protection, living-room & child-friendly media centres, classroom eduction, workshops and many more! All add-ons are designed to be interchangeable and can be added and removed when required.
 
The USB/HDMI security cover is a dual-use shroud that can be utilised to protect access to all the external inputs and outputs. Two covers can be used simultaneously if only very limited access is required, and “punch-out” access hatches are available for both the Ethernet and Micro USB power port if these inputs are required. Security covers are tamperproof and can only be removed from inside the case. 
 
In addition to protecting the Raspberry Pi ports, the shroud is offset from the body by 12mm. The enables the secure, internal and protected use of up to four nano USB dongles with the cover installed.
 
USB & HDMI Security Cover Features:
  • Dual-Use - Compatible with Either Set of I/O Ports e.g. HDMI or USB Side
  • Secure and Tamper-Proof
  • RJ45 & Micro USB Power Breakout Hatches
  • Off-Set to Enable the Use & Internal Protection of up to 4 Nano USB Dongles!
R39.34  Inc VAT
Blue 5mm diffused LED (10 pcs) (Blue LED 10x5mm)
Blue LED diffused 5mm 10 units

Specification:
ColorSizeWavelength(nm)Voltage(V)MCDLens color
Red5mm620-6301.8-2.3800-1000Red diffused
Yellow5mm580-5901.8-2.3800-1000Yellow diffused
Green5mm520-5302.8-3.6800-1000Green diffused
White5mm6000-6500k2.8-3.614000-16000Clear
Blue5mm460-4702.8-3.6800-1000Blue diffused

Resources:
Python library
Introduction
R9.90  Inc VAT
RJ45 RJ11 2-in-1 Network and Phone Cable Tester (RJ45 tester)
The cable tester can be used for RJ45 networks, RJ11 and telephone cables. It can test the cables with reliable accuracy. This is a useful tool for technicians in installation and maintenance.
 
- Tests both RJ45 (max 8-pin Network) and RJ11 (max 6-pin phone)
- Powered by a single 9V cell battery(not included)
- Carrying case not included
R99.90  Inc VAT
Potentiometer single turn carbon linear PCB 10K (potentio 10k)

Single turn 10K

  • Linear
  • Carbon
  • PCB type
  • 5mm pitch pin
  • Spline shaft
  • 17mm diameter
  • 0.2W
  • Shaft length 10mm
  • Shaft diameter 6mm

Resources:
Python Library
Definition, Types, And Working Principle
R9.90  Inc VAT
Infrared Obstacle Avoidance Sensor (IR detecter 1 channel)
The sensor module light is adjustable to the environment, the working voltage is 3.3 V to 5 V.
It has a pair of infrared transmitting and receiving LEDs, when detecting obstacles (reflecting surface), receiving LED detects it.

After the comparator circuit processing, a green indicator will light up, at the same time the signal output interface will output a digital signal (a low level signal), can be adjusted to detection distance through the potentiometer, effective distance range 2 ~ 80 cm, easy to assemble and use. It can be widely used in robot obstacle avoidance, line following and so on in many projects.

R14.90  Inc VAT
1.5M USB A Male To Mini 5 Pin Male Black (1.5m usb mini)
This USB 2.0 cable enables you to connect different devices e.g. HDD enclosure, digital cameras, mobile phones, navigation systems etc.
R44.90  Inc VAT
Per Page      81 - 100 of 796