Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
This module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor
R29.90  Inc VAT
This is the V2.1 camera. OS releases from Bullseye onwards will no longer support the older camera system and applications. There is no Python interface yet. An alternative to the old Picamera, imaginatively named Picamera2, is in development. Raspberry Pi OS Buster is still available to download if you’re not ready to use Bullseye
R479.90  Inc VAT
FLIRC V2 - RPi USB XBMC IR Remote Receiver (Flirc IR receiver)

Description:

The FLIRC USB dongle allows the use of any remote control with your Raspberry Pi. Configure the device on your desktop PC, then simply plug into your Pi for a perfect media centre companion! Amaze your friends and family when the tiny box stuck to the back of your TV controls your entire media collection using an old DVD remote!

New Flirc Version 2 is smaller, lighter and much more professional!

FLIRC learns from any remote control, not caring about different vendor protocols. Just walk through the super simple setup - pairing individual remote buttons with 'Media Centre Buttons' and you're done. It's basically a universal IR receiver, so can be used with any remote you choose, old, new or Universal! The best part about FLIRC is that it can be used to mimic a keyboard so every media center application understands it without any drivers. You can map all keyboard functions to a remote using FLIRC - it's very cool! FLIRC runs across all platforms including the Raspberry Pi, so you can use it on your PC, laptop or Mac!
 
Tutorials
 
We've written an entire step by step guide for FLIRC which includes:
  • Setting up OSMC (XBMC) media operating system on the Raspberry Pi.
  • Setting up your FLIRC module and porting it to any remote.
  • Putting it all together!
  • More advanced FLIRC programming - porting an entire keyboard to a remote!

R389.90  Inc VAT
Flat Ribbon Cable 40 Way - 2 Meter lenghts (40 ribbon/2m)
Description:

Looking for a neat way to connect data transmission devices? This 40-way flat ribbon cable is commonly used with computers and audio and digital equipment. It provides a simple solution to mass termination. 

Features:

28 AWG
Extended temperature rating: -20oC to 85oC
Insulation: Polyvinyl chloride (PVC)
Stranded copper wire
Sold Per 2 Meter length

What's in the box?:

2m x Flat Ribbon Cable
R159.90  Inc VAT
Official Raspberry Pi3B and Pi3B Red & White Case (official case Pi3 Red/White)

PLEASE NOTE: Raspberry Pi not included.
Description:


The Official Raspberry Pi 3 Model B Case is now available! Specially made and beautifully crafted, this nifty and tactile snap-together case is designed to protect your RPi 3! Side pieces can be individually removed to enable access to the GPIO, and the top can also be removed to enable the addition of HATs or other GPIO periphery! There's even LED lights pipes to top it all off!

Features of the Official Raspberry Pi Case

  • Fabulous Raspberry Red and White Colour Combination

  • 5 Part "Snap-Fit" Enclosure

  • Cut-outs for all connection points

  • Micro SD card cut-out

  • Plastic LED light protector

  • Stick on rubber feet for case stability

    R159.90  Inc VAT
    BMP180 Digital Barometric Pressure Sensor Board Module (Barometric sensor)
    Description:

    This digital barometer has some interesting applications. By measuring the absolute pressure of the environment and converting this into altitude. you will have a reliable sensor for determining the height of your robot, plane or projectile. This sensor is capable of achieving an accuracy of 1m, with noise of only 17cm in ultra-high resolution. The device will operate at only 0.3uA meaning low current draw for battery powered applications.

    Specifications:


    1.8V to 3.6V Supply Voltage
    Low power consumption - 0.5uA at 1Hz
    I2C interface
    Max I2C Speed: 3.5 MHz
    Very low noise - up to 0.02hPa (17cm)
    Fully calibrated
    Pressure Range: 300hPa to 1100hPa ( 9000m to -500m)
    Weight: 1.18g
    Size: 21mm x 18mm

    Package includes:

    1 x BMP180 Digital Barometric Pressure Sensor Board Module
    1 x Male to Male 4 pin header

    Resources:

    Using the BMP180 with Raspberry Pi
    R29.90  Inc VAT
    IIC / I2C 1602 Blue Backlight LCD Display Module For Arduino (Blue backlight display)
    Description:

    Comes with an I2C breakout board at the back. This allows you to use only 2 of your controller pins to be able to communicate with your screen, leaving the rest for other things.

    Specifications:

    Power supply voltage: 2.5 - 6V
    Supports I2C
    Blue back light, contrast can be adjusted
    Two line output
    Four wire connection

    Package included:

    1 x LCD Display Module

    Resources:

    Setup Guide
    R75.90  Inc VAT
    Raspberry Pi Camera Board Replacement Cable 300mm (Cam cable 300mm)
    Description:

    The Raspberry Pi Camera Module comes fully assembled with a 15-Way 150mm flat, flex cable that plugs directly in the Raspberry Pi CSI port. Unfortunately the included cable is quite fragile, and can break if twisted or bent too far.
    Don't worry though, not all is lost if that cable does happen to break! Replacement raspberry pi camera board cables are available and it's very easy to swap them over!
    This replacement cable is 300mm long.

    The Raspberry Pi Camera Board Replacement Cable Features:
    • Direct Replacement for the Raspberry Pi Camera Board Cable
    • 300mm Overall Length
    • 1mm Pitch
    • 15 Way Flat Cable
    • Conductor: Tin plated copper
    • Insulation: White PVC
    • Supporting tape: Blue polyester
    • UL rating: UL2896
    • Temperature rating: 80°C
    • Voltage: 30V
    • Flame test: VW-1, FT1, FT2
    • CSA Standard: CAN/CSA-22.2 No.210.2


    What's in the box?:


    1 x Camera Board Replacement Cable
    R26.90  Inc VAT
    Potentiometer single turn carbon linear PCB 2K (potentio 2k)
    Description:

    Mainly used to control electrical devices such as volume controls on audio equipment.
    Creates a variable resistance that you can change by turning the knob

    Specifications:
    • Single turn 2K
    • Linear
    • Carbon
    • PCB type
    • 5mm pitch pin
    • Spline shaft
    • 17mm diameter
    • 0.2W
    • Shaft length 10mm
    • Shaft diameter 6mm

    What's in the box?:

    1 x Potentiometer

    Resources:

    Python Library
    Definition, Types, And Working Principle
    R9.90  Inc VAT
    L9110S H Bridge Stepper Motor Dual DC Driver Controller Module (L9110S small H Bridge)

    Description:

    There are two L9110S motor controller chips onboard
    This module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor

    Feature:

    Work under low static current
    Power supply voltage: DC 2.5V - 12V
    Each channel has 800mA continuous current output
    Low saturation pressure drop
    TTL / CMOS output level compatible, can be connected directly to the CPU
    Output built-in clamping diode, apply to the perceptual load
    Control and drive integrate in IC
    Pin high pressure protection function
    Working temperature: 0°C - 80°C
    Size: 29 x 21mm(L x W)

    Circuit diagram:

     


    Package includes:

      1x L9110S stepper motor driver

    Robot control with Python

    This module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor
    R29.90  Inc VAT
    Raspberry Pi Camera Board V2 (8MP,1080p) (RPi Cam 8MP V2)

    How to use Picamera with Raspberry Pi OS Bullseye: https://www.youtube.com/watch?v=E7KPSc_Xr24&list=WL&index=2

    Description:

    The Raspberry Pi Camera Module V2 is the new and improved official camera board from the Raspberry Pi Foundation! Custom designed and manufactured by the Raspberry Pi Foundation in the UK, the Raspberry Pi Camera Board V2 features an ultra-high quality 8 megapixel Sony IMX219 image sensor (up from 5MP on the V1 camera board), and a fixed focus camera lens. The V2 camera module is capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p90 video.

    The module attaches to Raspberry Pi by way of a 15 Pin Ribbon Cable, to the dedicated 15-pin MIPI Camera Serial Interface (CSI), which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data to the BCM2835 processor. A 150mm CSI cable is included with every camera.

    The board itself is tiny, at around 25mm x 23mm x 9mm, and weighs just over 3g, making it perfect for mobile or other applications where size and weight are important. 

    The Raspberry Pi Camera Board V2 Features:

    • Fixed focus lens on-board
    • 150mm CSI camera cable included
    • 8 megapixel native resolution sensor-capable of 3280 x 2464 pixel static images
    • Supports 1080p30, 720p60 and 640x480p90 video
    • Size 25mm x 23mm x 9mm
    • Weight just over 3g
    • Connects to the Raspberry Pi board via a short ribbon cable (supplied)
    • Camera v2 is supported in the latest version of Raspbian, Raspberry Pi's preferred operating system

    Note: to use the camera with Raspberry Zero, you need to buy a specific cable: Raspberry Pi Zero Camera Cable

    Getting started with PiCamera
    This is the V2.1 camera. OS releases from Bullseye onwards will no longer support the older camera system and applications. There is no Python interface yet. An alternative to the old Picamera, imaginatively named Picamera2, is in development. Raspberry Pi OS Buster is still available to download if you’re not ready to use Bullseye
    R479.90  Inc VAT
    Raspberry Pi "NoIR" Infrared Camera Board V2 (8MP,1080p) (camera NOIR 8MP)

    How to use Picamera with Raspberry Pi OS Bullseye: https://www.youtube.com/watch?v=E7KPSc_Xr24&list=WL&index=2

    The NoIR Camera V2 is the “night vision” version of the official camera board released by the Raspberry Pi Foundation. The Raspberry Pi NoIR Camera Board V2 has no Infrared filter, which makes it perfect for taking Infrared photographs or photographing objects in low light (twilight) conditions! Custom designed and manufactured by the Raspberry Pi Foundation in the UK, the Raspberry Pi  NoIR Camera Board V2 features an ultra-high quality 8 megapixel Sony IMX219 image sensor (up from 5MP on the V1 camera board), and a fixed focus camera lens. The V2 camera module is capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p90 video.

    The module attaches to Raspberry Pi by way of a 15 Pin Ribbon Cable, to the dedicated 15-pin MIPI Camera Serial Interface (CSI), which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data to the BCM2835 processor.

    The board itself is tiny, at around 25mm x 23mm x 9mm, and weighs just over 3g, making it perfect for mobile or other applications where size and weight are important. 

    The Raspberry Pi NoIR Camera Board V2 Features:

    • No IR Filter - Great for Low Light Conditions
    • Includes Blue Filter
    • Fixed focus lens on-board
    • 150mm CSI camera cable included
    • 8 megapixel native resolution sensor-capable of 3280 x 2464 pixel static images
    • Supports 1080p30, 720p60 and 640x480p90 video
    • Size 25mm x 23mm x 9mm
    • Weight just over 3g
    • Connects to the Raspberry Pi board via a short ribbon cable (supplied)
    • NoIR Camera v2 is supported in the latest version of Raspbian, Raspberry Pi's preferred operating system
    Getting started with PiCamera

    Note: to use the camera with Raspberry Zero v1.3, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera Cable
    R499.90  Inc VAT
    Set with 10 cables 42cm 5 colours with booted crocodile clips (croc jumpers set 10)
    Description:

    This bundle contains ten leads with crocodile clips at each end
    Two of each of five colour cords: black, green, red, white and yellow
    The PVC sleeves on the crocodile clips match the colour of the cables

    This bundle is ideal for use with your micro:bit

    Specifications:

    • Material: 304 Stainless Steel.
    • Length: 40 mm.
    • Jaws Open: 6.2 mm.
    • Socket: 2 mm banana plug.


    What's in the box?:

    10 x booted crocodile clips

    R79.90  Inc VAT
    LED RGB Common Cathode 4-Pin F5 5MM Diode (5 pack) (LED RGB (5))
    Description:

    Convenient for DIY projects
    Perfect use for home, office and industry electrical equipment and electrical appliances


    Features:
     
    Current : 3V
    Voltage: 20 mA
    Size: 5mm 
    Light Color: RED, BLUE, GREEN

    What's in the box:

    5 x RGB LED Diodes

    Resources:

    Read the docs
    R8.90  Inc VAT
    L298N Dual H-Bridge Stepper Motor Driver Board (H Bridge big red dual stepper)
    Description:

    The L298N is a dual H-Bridge motor driver which allows speed and direction control of two DC motors at the same time. The module can drive DC motors that have voltages between 5 and 35V, with a peak current up to 2A.

    Specifications:

    Double H bridge drive
    Chip: L298N (ST NEW)
    Logical voltage: 5V
    Drive voltage: 5V-12V
    Logical current: 0mA-36mA
    Drive current: 2A (MAX single bridge)
    Storage temperature: -20 to 135
    Max power: 25W
    Weight: 30g
    Size: 43 x 43 x 27mm

    Note:

    This module has a built-in 5v power supply, when the driving voltage is 7v-12v, this supply is suitable as a power supply.
    DO NOT connect input voltage to 5v on controller interface.
    When ENA is enabled IN1 IN2 control OUT1 OUT2
    When ENB is enabled IN3 IN4 control OUT3 OUT4

    Note:  Package does not include the board mounting screws.

    Package includes:

    1 x  L298N Module

    Resources:

    Robotic control with python



    R39.90  Inc VAT
    Raspberry Pi MF Standoff HAT Mounting Kit(11mm) (MF hat mounting kit)
    Description:

    Need to securely mount your Raspberry Pi HAT to your Raspberry Pi? You need our HAT mounting kit!

    The 11mm spacers in the kit fit between the Pi PCB and the HAT, and can be secured using the included M2.5 bolts and nuts.

    What's in the box?:

    • 4 x M2.5 x 11mm Male to Female Standoffs
    • 4 x M2.5 +5 Bolts
    • 4 x M2.5 Nuts
    R19.90  Inc VAT
    13.56MHz RFID Tag For Access System Blue (13.56 RFID tag blue)
    Description:

    This is a basic 13.56MHz RFID tag great for all your security and access control needs.

    RFID is an acronym for “radio-frequency identification” and refers to a technology whereby digital data encoded in RFID tags or smart labels

    Features :

    Small and durable
    Waterproof, shockproof, anti-corrosive.
    Keyring for easy carrying.

    Specifications :


    Main Chip : Fudan F08 compatible S50
    Colour : Blue,Yellow, Black, Green, Red
    Size : Approx. 40.5×32×4.2mm
    Operating Frequency : 13.56 MHz
    Communication speed : 106K Boud
    Read and write distance : 2.5 ~ 10cm
    Read and write time : 1 ~ 2ms
    Operating Temperature : -20 ℃ ~ 85 ℃
    Endurance :> 100,000 times
    Storage capacity : 8Kbit, 16 partitions, each partition with 2 group passwords

    Typical applications :
    Enterprise / campus access cards, parking, district management,attendance systems, patrol systems, enterprise systems, access control systems, radio frequency identification field etc.


    Package includes :

    1 x 13.56MHz RFID Keyfob
    R12.90  Inc VAT
    Arcade Kit DIY Replacement Parts USB Encoder to PC Joystick and Buttons (Arcade kit)
    Description :

    Each encoder can support one joystick. Use them to DIY your own Arcade game machine. The Zero Delay USB Arcade Encoder is a fully compatible plug and play solution, simply plug in your joystick and buttons into the encoder, plug the USB cable into the Pi, map your buttons in RetroPi and away you go - it really is that easy! You can use multiple encoders at the same time, so they're great for multiplayer arcade machines!
     
    Specifications :

    Joystick Size: Approx. 95x60x100mm
    Encoder Board Size: Approx. 85x35mm
    USB Cable Length: Approx. 1.8m
    Colour: Red

    We have tested this unit on Raspberry Pi using Retropie and a Windows 7 PC using MAME.
     
    Package includes :

    1 x Encoder Board
    1 x USB Cable
    1 x 5 pin Cable for Joystick
    1 x 5 Pin Joystick
    8 x 30mm Push Buttons
    2 x 24mm Push Buttons
    13 x Cables for Buttons

    Get Retropie on the Raspberry Pi
    ModMyPi setup guide
    R449.90  Inc VAT
    Arcade Kit DIY Replacement Parts USB Encoder to PC Joystick and Buttons ( BLUE) (Arcade kit BLUE)
    Description :

    Each encoder can support one joystick. Use them to DIY your own Arcade game machine. The Zero Delay USB Arcade Encoder is a fully compatible plug and play solution, simply plug in your joystick and buttons into the encoder, plug the USB cable into the Pi, map your buttons in RetroPi and away you go - it really is that easy! You can use multiple encoders at the same time, so they're great for multiplayer arcade machines!
     
    Specifications :

    Joystick Size: Approx. 95x60x100mm
    Encoder Board Size: Approx. 85x35mm
    USB Cable Length: Approx. 1.8m
    Colour: Blue

    We have tested this unit on Raspberry Pi using Retropie and a Windows 7 PC using MAME.
     
    Package includes :

    1 x Encoder Board
    1 x USB Cable
    1 x 5 pin Cable for Joystick
    1 x 5 Pin Joystick
    8 x 30mm Push Buttons
    2 x 24mm Push Buttons
    13 x Cables for Buttons

    Get Retropie on the Raspberry Pi
    ModMyPi setup guide
    R449.90  Inc VAT
    Raspberry Pi Camera Board Replacement Cable 500mm (Cam cable 500mm)
    Description:

    The Raspberry Pi Camera Module comes fully assembled with a 15-Way 500mm flat, flex cable that plugs directly in the Raspberry Pi CSI port. Unfortunately the included cable is quite fragile, and can break if twisted or bent too far.
     
    Don't worry though, not all is lost if that cable does happen to break! Replacement raspberry pi camera board cables are available and it's very easy to swap them over!
     
    This replacement cable is 500mm long.
     
    The Raspberry Pi Camera Board Replacement Cable Features:
    • Direct Replacement for the Raspberry Pi Camera Board Cable
    • 500mm Overall Length
    • 1mm Pitch
    • 15 Way Flat Cable
    • Conductor: Tin plated copper
    • Insulation: White PVC
    • Supporting tape: Blue polyester
    • UL rating: UL2896
    • Temperature rating: 80°C
    • Voltage: 30V
    • Flame test: VW-1, FT1, FT2
    • CSA Standard: CAN/CSA-22.2 No.210.2 
    R29.90  Inc VAT
    FR-4 Double Side Prototype PCB Printed Circuit Board kit (prototype board kit)
    Description:

    Standard Prototype PCB is great for prototyping and building circuits but it can be time consuming to use with components with certain pin configurations such as IC's.

    These boards are especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering all the pieces in place.

    Specifications:

    Grid : 0.1" (2.54mm)
    Thickness : 1.6mm(5pcs)
    Hole diameter : about 1mm
    Material : FR-4 (glass fiber)
    All holes are plated through
    Both sides are identical
     
    Dimensions                           Hole(column x  row)   
    50 x 70mm, 1.97" x 2.76"      24 x 18                          
    40 x 60mm, 1.57" x 2.36"      20 x 14                          
    30 x 70mm, 1.18 x 2.76"        24 x 10                          
    20 x 80mm, 0.79" x 3.15"      28 x 6                            
     
    Package Includes:
     
    4 x FR-4 Double Side Prototype PCB Printed Circuit Board

    Resources:
    Introduction to soldering
    Video: How to solder properly
    The secrets to good soldering
    R24.90  Inc VAT
    GPIO Breadboard Breakout Kit (GPIO breakout kit)
    Description:

    This bundled breakout kit made for easy connection from your Raspberry Pi GPIO to the breadboard.
    The bundle is discounted to save you some hard earned cash rather than paying full price for loose components.

    What's in the box?

    1 x BreadBoard 400 tie points
    1 x 40-Pin Gray Ribbon Cable (29cm)
    1 x GPIO T Board for easy breadboard connection
    R106.90  Inc VAT
    Per Page      101 - 120 of 819