Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
This neat little adapter board is designed to join two Raspberry Pi Camera board cables together, allowing you to extend the length of the camera cable.
R64.90  Inc VAT
This panel mount HDMI (Male to Female) extension cable will allow you to extend an HDMI connection and secure it to an enclosure!
R99.90  Inc VAT
This Pi Zero USB Adaptor converts the Zero's Micro USB B Port to a full sized USB A port
R19.90  Inc VAT
Want to add three extra USB ports and ethernet connection to your Raspberry Pi Zero?
R126.90  Inc VAT
Need to send your Raspberry Pi USB signals over a longer distance?
R139.90  Inc VAT
2M GT2 20 Teeth Belt with Aluminium Timing Pulleys (2m belt 4 pulleys,tensioners)
GT2 Pulley:

Teeth: 20
Groove width: 5mm
Total width: 15mm
Diameter of bore: 5mm
Flange: Dual
Material: Aluminium

GT2 Belt:

Pitch: GT2
Width: 6mm
Length: 2m

Idler:

Teeth: 20
Diameter of bore: 5mm
Total width: 8mm
Material: Aluminium

Features:

Durable and practical
Designed specifically for linear motion
GT2 Pulley and GT2 Belt are used together
Round tooth profile guarantees that the belt tooth fits smoothly
20 Teeth contact with the belt minimizes the chance of the belt slipping

Package includes:

1 x GT2 Belt  
2 x GT2 Pulley
2 x Idler
4 x Tensioner
1 x Allen key
R169.90  Inc VAT
RJ45 Network Cable Lead Connector Boot for Cat 5 5e 6 (10 pack) (RJ45 boots grey(10))
Features:
1.Make Your Own Ethernet Cables
2 Protect your cable ends with these snag free boots for RJ-45
3.Helps to Keep Cables from Snags and Rips
4.Extend the Life of your Cable

Specifications:
1. Material: Rubber
2. Dimensions: 27.5×15×15mm (L × W × H)
3. Color: Gray

Package Included:
10 x RJ45 Cat 5e 6 Connector Boots
R16.90  Inc VAT
Raspberry PI Camera Cable Joiner/Extender (Cam cable joiner/extender)

PLEASE NOTE: Pic is for demonstration purposes only
Ribbon Cables are NOT included, this is the adaptor board only!


This neat little adapter board is designed to join two Raspberry Pi Camera board cables together, allowing you to extend the length of the camera cable on Raspberry Pi B/B+/2/3 and Pi Zero using multiple cables!

The Raspberry Pi camera module comes with its own 30cm cable to connect to the Pi, but sometimes that's simply not long enough. This lovely little board lets you add extension cables to your existing camera cable, giving you as much range as you'll need!

Features:

  • 1mm Pitch
  • 15 Way Flat Cable Connector Female to Female
  • Designed for Raspberry Pi Camera Cables

Raspberry Pi B/B+/2/3 - You will need 2 standard Raspberry Pi Camera Cables + One Extender Board.

Raspberry Pi Zero -You will need one Pi Zero Camera Cable + Standard Raspberry Pi Camera Cable + One Extender Board.

This neat little adapter board is designed to join two Raspberry Pi Camera board cables together, allowing you to extend the length of the camera cable.
R64.90  Inc VAT
Panel Mount HDMI Cable 0.4m (panel mount hdmi)

This panel mount HDMI (Male to Female) extension cable will allow you to extend an HDMI connection and secure it to an enclosure!

Perfect for placing your Raspberry Pi in a secure box, the panel mount uses two #4-40 (M3) screws to attach the female socket end! The panel mount screw holes are 26.9mm apart.

This cable is 0.4m long (about 16 inches), and is a V1.4 CEC enabled cable.

This panel mount HDMI (Male to Female) extension cable will allow you to extend an HDMI connection and secure it to an enclosure!
R99.90  Inc VAT
RJ45 Cat5e Straight Network Cable Ethernet LAN Coupler Joiner Connector (RJ45 coupler straight)
Specifications:
Quantity: 1 Pcs
Color: As per pic
Single Size: Approx.34x21x16mm

Features:
Quick and economical.
Straight through configuration.
This coupler allows two ethernet cables with RJ45 connectors to be connected together so that the signal will pass straight through.
It is a cheap and simple way to extend network cables and is ideal for moving networked computers without uprooting existing cables.

Package Included:
1 x RJ45 Straight Through Ethernet LAN Cable coupler
Cables are not included
R16.90  Inc VAT
4Pcs Speaker Terminal Binding Post Banana Plug Socket Connector (4 x speaker binding posts)
Description :

Type : Banana plug or lug
Solid hard plastic shell
Quantity : 4pcs ( 2 x red and 2 x black )
Easy installation with screws and nuts
Suitable for :  4mm banana plugs, lugs or bare wire

Package Included :

  2 pair of speaker binding posts (2 x red and 2 x black)
R59.90  Inc VAT
PLCC IC Chip Extractor Motherboard Circuit Board Component Puller (chip extractor tool black)
Description:

Appropriate for extracting PLCC, PGA, PCLL and IC packed by DIP from SOCKET or PCB
With gripping your hand you can extract the IC vertically and perfectly
Great for extracting dense IC
Metal and shielded plastic to avoid static charge damage to IC components
Small hook for easy extracting IC and installation
Perfect for repair man, such as TV / DVD / PC technicians or IC workers

Specifications:

Dimension: extractor L100mm, small hook L4 to 9mm (when you grip the extractor the hook will shorten to 4mm)
Material: stainless steel and plastic

Package includes:

1 x IC chip extractor
R39.92  Inc VAT
R54.90
500Pcs 5MM LED Diode Kit Mixed Color Red Green Yellow Blue White (500 5mm LED kit)
Description:

There are 5 colours 5MM Red Green Yellow Blue White each 100Pcs, total 500Pcs

Parameter:

Working current: 20 (mA)
Working voltage:
  • Red: 1.9V-2.1V
  • Yellow: 1.9V-2.1V
  • Blue:3.0V-3.2V
  • Green: 3.0V-3.2V
  • White:3.0V-3.2V
MCD:
  • Red:300
  • Yellow: 300
  • Blue:700-900
  • Green: 400-500
  • White:12000-14000
Wave length:
  • Red: 630-635
  • Yellow: 588-590
  • Blue:460-465
  • Green: 567-570
  • White:Color temperature 8000

Package includes:

500 x 5MM LED Diode

Specification:
ColorSizeWavelength(nm)Voltage(V)MCDLens color
Red5mm620-6301.8-2.3800-1000Red diffused
Yellow5mm580-5901.8-2.3800-1000Yellow diffused
Green5mm520-5302.8-3.6800-1000Green diffused
White5mm6000-6500k2.8-3.614000-16000Clear
Blue5mm460-4702.8-3.6800-1000Blue diffused

Resources:
Python library
Introduction
R299.90  Inc VAT
Battery Box 2xAA (3V) No Switch (3V AA switch battery box)

This battery box is designed for use as a nice switchable, portable power pack, and fits any two alkaline or rechargeable AA batteries in series. The body is moulded in black ABS Resin and has a slide on detachable lid which can be locked for extra security through use of a small provided screw. Connection is via two flexible stranded red (positive) & black (negative) 26AWG wire leads, which are approximately 150mm in length.

The two batteries are held in series, for a nominal output of 3V DC (AA Batteries @ 1.5V each).
 
Specification
  • Battery Cell Size AA
  • Number of Cells 2
  • Body Material ABS Resin
  • Height 19.0 mm, Length 68.0 mm, Width 33.0 mm
  • Terminal Type Wire Lead
  • Type Battery Box
  • Weight 0.01900 kg
R34.90  Inc VAT
SNES USB Famicom Colored Super Nintendo Style Controller (Retro controller SNES)

Get your retro on with the Raspberry Pi compatible SNES style USB gamepad! This is not an official Nintendo product, but a 3rd party USB type replica of the Super Nintendo/Famicom unit produced in the early 90's!

We tested quite a few from different suppliers, and these were the best - with nice snappy, clicky buttons, and the traditional blue, red, green, yellow layout.

Features:

  • USB Connector
  • Raspberry Pi Compatible
  • D-Pad
  • Buttons: Start, Select, X, Y, A, B, R, L
  • Cable Length: 1.4m
R49.90  Inc VAT
328pcs 2:1 Polyolefin Halogen-Free Heat Shrink Tube Sleeving 5 Colours 8 Sizes kit (heat shrink colours kit)
This is a huge collection of useful heat shrink tubing, 8 sizes, 5 colours, 328 pieces in total.
Supplied internal diameter : 1.0mm, 2.0mm, 3.0mm, 4.0mm, 6.0mm , 8.0mm, 10.0mm, 14.0mm minimum,
Fully shrunk internal diameter : 0.5mm, 1.0mm, 1.5mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm, 7.0mm maximum
Color : Black, Red, Yellow, Blue, Green.

Shrinkage Ratio : 2:1 (will maximum shrink to 1/2 its supplied diameter)
Material : Polyolefin
Minimum Shrinkage Temp : +70°C
Maximum Shrinkage Temp : +110°C
Operating Temperature : -55°C to +125°C
Tensile strength : 10.4 Mpa
Dielectric strength : 15kV/mm

RoHS Compliant.

Package Includes :

( Quantity x Supplied internal diameter x Single length )
120pcs x φ1.0 x 40mm
60pcs x φ2.0 x 40mm
32pcs x φ3.0 x 40mm
32pcs x φ4.0 x 40mm
32pcs x φ6.0 x 40mm
20pcs x φ8.0 x 80mm
16pcs x φ10.0 x 80mm
16pcs x φ14.0 x 80mm
R149.90  Inc VAT
Switched Battery Box 4xAA (6V) (switch batt box 4xAA)

This battery box is designed for use as a nice switchable, portable power pack, and fits any four alkaline or rechargeable AA batteries in series. The body is moulded in black ABS Resin and has a slide on detachable lid which can be locked for extra security through use of a small provided screw. It even includes a very useful miniature on-off slide switch which is very handy for wiring to projects that don't have a switch! Connection is via two flexible stranded red (positive) & black (negative) 26AWG wire leads, which are approximately 150mm in length.

The four batteries are held in series, for a nominal output of 6V DC (6.4V when fresh, 4V when dead), and 4.8V DC for rechargeables (5.2V when fully charged, 4.4V when discharged). Using rechargeables will make this work nicely with nearly any 5V project, with alkalines you may want to put a 1N4001 in series to drop the voltage from 6V down to 5.3V.
 
Specification
  • Battery Cell Size AA
  • Number of Cells 4
  • Body Material ABS Resin
  • Height 19.0 mm, Length 69.0 mm, Width 64.5 mm
  • Terminal Type Wire Lead
  • Type Battery Box
  • Weight 0.03300 kg
R41.90  Inc VAT
Raspberry Pi Camera Board Replacement Cable 1000mm (Cam cable 1000mm)
The Raspberry Pi Camera Module comes fully assembled with a 15-Way 1000mm flat, flex cable that plugs directly in the Raspberry Pi CSI port. Unfortunately the included cable is quite fragile, and can break if twisted or bent too far.
 
Don't worry though, not all is lost if that cable does happen to break! Replacement raspberry pi camera board cables are available and it's very easy to swap them over!
 
This replacement cable is 1000mm long.
 
The Raspberry Pi Camera Board Replacement Cable Features:
  • Direct Replacement for the Raspberry Pi Camera Board Cable
  • 1000mm Overall Length
  • 1mm Pitch
  • 15 Way Flat Cable
  • Conductor: Tin plated copper
  • Insulation: White PVC
  • Supporting tape: Blue polyester
  • UL rating: UL2896
  • Temperature rating: +80°C
  • Voltage: 30V
  • Flame test: VW-1, FT1, FT2
  • CSA Standard: CAN/CSA-22.2 No.210.2 
R34.90  Inc VAT
SparkFun Logic Level Converter Bi-Directional (Sparkfun logic level converter )

If you’ve ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The SparkFun bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time.

This level converter also works with 2.8V and 1.8V devices. What really separates this Logic level converter from our previous versions is that you can successfully set your high and low voltages and step up and down between them safely on the same channel. Each level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side.

The level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the ‘HV’ pin, low voltage (3.3V for example) to ‘LV’, and ground from the system to the ‘GND’ pin.

Dimensions: 0.63 x 0.52" (16.05 x 13.33mm)

Documents:

R59.90  Inc VAT
Adafruit ADS1015 12-Bit ADC (ADS1015 12-Bit ADC)

The Raspberry Pi does not feature an Analog-to-Digital Converter (ADC), so if you want to measure analogue singals, you'll need this 12-Bit ADC!

The Adafruit 4-Channel I2C 12-Bit ADC is a high-precision ADC and features the ADS1015 chip, which provides 12-bit precision at 3300 samples/second over I2C. The chip can be configured as 4 single-ended input channels, or two differential channels. As a nice bonus, it even includes a programmable gain amplifier,with up to x16, to help boost smaller single/differential signals to the full range. We like this ADC because it can run from 2V to 5V power/logic, can measure a large range of signals and its super easy to use. It is a great general purpose 12 bit converter. 

The chip's fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet and interfacing is done via I2C. The address can be changed to one of four options (see the datasheet table 5 in downloads below) so you can have up to 4 ADS1015's connected on a single 2-wire I2C bus for 16 single ended inputs. 
 
To get you started, we have example code for the Raspberry Pi - Simply connect GND to ground, VDD to your logic power supply, and SCL/SDA to your microcontroller's I2C port and run the example code to start reading data.
 
The Adafruit 4-Channel I2C 12-Bit ADC Features:
  • Wide Supply Range: 2.0V to 5.5V
  • Low Current Consumption: Continuous Mode: Only 150µA Single-Shot Mode: Auto Shut-Down
  • Programmable Data Rate: 128SPS to 3.3kSPS
  • Internal Low-Drift Voltage Reference
  • Internal Oscillator
  • Internal PGA
  • I2C Interface: Pin-Selectable Addresses
  • Can run from 2V to 5V power/logic
  • Measures a large range of signals and is super easy to use.
  • 12-bit precision at 3300 samples/second over I2C.
  • Configurable as 4 single-ended input channels, or two differential channels.
  • Includes a programmable gain amplifier, up to x16, to help boost up smaller single/differential signals to the full range.
  • Breakout Board equipped with ferrites to keep the AVDD and AGND quiet

Tutorials

Four Channel ADC Breakout

Example Code for the Raspberry Pi

R249.90  Inc VAT
HDMI to HDMI Cable 5m V1.4 (Gold Plated) (HDMI 5m)

    This extra long 5m Gold Plated HDMI to HDMI cables are the perfect low cost solution to connecting your Raspberry Pi to your HDMI monitor or TV. This is the latest high speed version V1.4 with Ethernet, 3D and CEC support!

    The 5m HDMI to HDMI Cable Features:

    • Tested for Compatibility with the Raspberry Pi
    • HDMI Male (19 Pin) to HDMI Male (19 Pin)
    • 5m Long
    • 24k Gold-Plated Contacts Prevents Corrosion for Life-Long Optimum Signal-Transfer
    • Fully CEC, Ethernet and 3D over HDMI enabled (V1.4 Connection)
    • Supports 4K2K, 2160p, 1440p, 1080p, 720p and 480p Resolutions
    • Supports 3D Content, Supports Audio Return Channel, Supports True HD Dolby 7.1 and DTS-HD Master Audio
    • 30AWG Wire
    • 3 Year Warranty
    • Dimensions 22.4 x 15.2 x 2.8 cm
    • Weight 206 g


      R109.90  Inc VAT
      Pi Zero micro USB to USB A Adapter White (Zero USB adapter)

      This Pi Zero USB Adaptor converts the Zero's Micro USB B Port to a full sized USB A port so you can plug in your mouse, keyboard or any other required peripherals! It's an OTG (on-the-go) host cable, which means your Zero can act as a host (master) or client (slave) device! This one's in white!

      Features:

      • Micro USB B (Male) to USB A (Female)
      • OTG On-The-Go Host Cable
      • CE and ROHS Compliant
      • For the Raspberry Pi Zero
      This Pi Zero USB Adaptor converts the Zero's Micro USB B Port to a full sized USB A port
      R19.90  Inc VAT
      3 Port USB Hub w/ Ethernet - Micro USB (Pi Zero) (3 port zero hub ethernet)

      Want to add three extra USB ports and ethernet connection to your Raspberry Pi Zero? You need one of these adaptors! This one comes with a Micro USB B input, so it plugs directly into your Raspberry Pi Zero without the need for adaptors or shims!

      The hub has three full size USB inputs, so you can easily add USB peripherals like mice, keyboards and WiFi to your Zero! There's even a plug and play RJ45 Ethernet port, so you can get direct network connectivity for your Zero using this hub!

      3 Port USB Hub with Ethernet - Micro USB Features:

      • Fully compatible with the Raspberry Pi Zero
      • Micro USB 2.0 Input Port
      • 3 x USB Ports
      • 1 x RJ45 Ethernet Port (10/100)
      Want to add three extra USB ports and ethernet connection to your Raspberry Pi Zero?
      R126.90  Inc VAT
      M3 Delta Adjustable Pulley 3D Printer Injection Molded Piece (M3 delta belt coupler)
      Features:

      Bore distance: 20mm x 20mm
      For: M3 (Both sides of the screw)
      Suitable belt: GT2 / MXL 6mm (note: belt not included)
      Material: High strength nylon

      Package includes:

      1 x M3 Delta Adjustable Pulley


      M3 Delta Adjustable Pulley 3D Printer Injection Molded Piece
      R99.90  Inc VAT
      USB Over Ethernet Extender (usb over ethernet extender)

      Need to send your Raspberry Pi USB signals over a long distance? You need one of these USB over Ethernet Booster sets! This USB booster allows you to connect a USB device to your Pi at a distance of up to 45 meters via the use of a Cat5e (or greater) RJ45 Ethernet Patch cable.

      The kit consists of two USB to RJ45 extension adapters, one male one female, and it's bus powered, so requires no external power! Works best on longer distances.

      USB Over Ethernet Booster Features:

      • USB Extension Adapter Pair
      • Extend USB signal up to 45 meters via RJ45 (CABLE NOT INCLUDED)
      • No additional drivers required - Plug n Play
      Need to send your Raspberry Pi USB signals over a longer distance?
      R139.90  Inc VAT
      Per Page      141 - 160 of 796