Search
Search Criteria
Products meeting the search criteria
The Raspberry Pi Camera Module comes fully assembled with a 15-Way 150mm flat, flex cable that plugs directly in the Raspberry Pi CSI port. Unfortunately the included cable is quite fragile, and can break if twisted or bent too far.
- Direct Replacement for the Raspberry Pi Camera Board Cable
- 150mm Overall Length
- 1mm Pitch
- 15 Way Flat Cable
- Conductor: Tin plated copper
- Insulation: White PVC
- Supporting tape: Blue polyester
- UL rating: UL2896
- Temperature rating: 80°C
- Voltage: 30V
- Flame test: VW-1, FT1, FT2
- CSA Standard: CAN/CSA-22.2 No.210.2
Application: Build CNC routers, 3D printers, CNC laser cutters, CNC plasma cutters, robotics projects, 3D carvers, machine guards, workstations, etc.
Compatible with: 80/20 20 Series, Misumi 5 Series, Openbuilds V-Slot, Openbuilds C-Beam, and other standard v-slot/t-slot 20mm aluminum extrusions
Specifications:
For the 2020 the size is 60mm x 60mm x 4mm, recommend to use M5 x10mm screw and M5 T nut
Material: Aluminium
Colour: Silver
Aperture:M5
Holes Spaced:20mm / 0.79 inch
Thickness:4mm / 0.16 inch
Dimensions: 60mm x 60mm /2.36 x 2.36 inch

What's in the box?
1 x bracket
Robotbit is a robotic expansion board specially designed for micro:bit by the KittenBot team.
It has a powerful ability to drive DC motors, stepper motors, and servos. It also comes with an onboard buzzer, four RGB pixels and releases all valid IO from micro:bit, with support for the most common electronics module in the market.
It comes with an 18650 battery holder, integrated lithium battery boost, charging and protection chip. Support for external power input. Mechanical support for a robotic chassis and LEGO technical slots.
For more details and tutorials please click here
micro:bit, 18650 battery and Kitty case not included, but we have them all on the store!
SUPPORTED SOFTWARE- Kittenblock (based on Scratch3.0)
- Makecode and python(Mu editor in microbit mode)


- 5V external power input(with anti-reverse protection)
- Power switch
- Power Indicator
- Battery Indicator
- Micro USB charging port
- 4-channel DC motor / 2-channel stepper motor
- Jumper for buzzer selection
- 8 channel IO(corresponding to Micro:bit P0-P2、P8、P12-P15)
- 5V and GND port
- Buzzer
- 8 channel servo port
- I2C interface (expandable I2C module)
- 18650 battery case
- Battery protection recovery push button
- Micro:bit edge connector
- 4x RGB pixel
- Servo driver (PCA9685)
- 2xDc/Stepper driver (DRV8833)
- KittenBot robot chassis mounting hole
- Standard LEGO hole
- Dimensions: 78mm x 57mm x 23mm
- PCB Thickness: 1.5mm
- Small mechanical hole: 3.0mm
- Big mechanical hole: 4.8mm
- Net weight (without packaging): 37.5g
- 18650 battery voltage: 3.7V
- USB input voltage: 5V
- VM pin max output: 1A (with onboard battery)
- External Voltage Input (the green terminal): 5V (only supports 5V input, do not connect over 5V, maximum current supports 3A)
Standard Raspberry Pi 40PIN GPIO header, customized for Raspberry Pi series boards
- PCA9685 PWM driver as the fan controller, powerful driving capability, auto PWM adjustment
- 0.91" OLED, 128x32 pixels, displays board temperature or other user-defined content in real time
- Adopts 3007 size PWM controlled fan, up to 8000rpm speed, brings strong airflow
- Supports retrieving temperature data in real time, and then adjusting the speed automatically, programmable configuration
- I2C pins, for connecting other host control boards
- 16-ch PWM outputs, for driving other external PWM devices
- Comes with heat sinks, better cooling effect
Up to 16-ch PWM outputs, powerful driving capability, auto PWM adjustment combined with the included heat sinks, achieving better cooling effect
- 128×32 pixels, I2C controlled
- displays board temperature or other user-defined content in real time

What's On Board

- Standard Raspberry Pi 40PIN GPIO header
- PCA9685 PWM driver
- 3007 size PWM controlled adjustable fan
- PCA9685 I2C address configuration
- Reserved I2C control pins
- Reserved PCA9685 output channels
- 0.91" OLED display
Pinout definition

Outline dimensions(mm)

Resources & Services
Build CNC routers, 3D printers, CNC laser cutters, CNC plasma cutters, robotics projects, 3D carvers, machine guards, workstations, etc.
Compatible with:
80/20 20 Series, Misumi 5 Series, Openbuilds V-Slot, Openbuilds C-Beam, and other standard v-slot/t-slot 20mm aluminum extrusions
Specifications:
Recommend to use M5 x10mm screw and M5 T nut
Material: Mild Steel
Thickness:3mm
These plates are laser cut from 3mm mild steel and still needs to be painted/powder coated.
What's in the box?
1 x bracket
Build CNC routers, 3D printers, CNC laser cutters, CNC plasma cutters, robotics projects, 3D carvers, machine guards, workstations, etc.
Compatible with:
80/20 20 Series, Misumi 5 Series, Openbuilds V-Slot, Openbuilds C-Beam, and other standard v-slot/t-slot 20mm aluminum extrusions
Specifications:
Recommend to use M5 x10mm screw and M5 T nut
Material: Mild Steel
Thickness:3mm
These plates are laser cut from 3mm mild steel and still needs to be painted/powder coated.
What's in the box?
1 x bracket
The ESP32-CAM is a small size, low power consumption camera module based on ESP32. It comes with an OV2640 camera and provides onboard TF card slot. The ESP32-CAM can be widely used in intelligent IoT applications such as wireless video monitoring, WiFi image upload, QR identification, and so on.
Specifications:
Low-power dual-core 32-bit CPU for application processors
Main frequency up to 240MHz, computing power up to 600 DMIPS
Built-in 520 KB SRAM, external 4M PSRAM
Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
Support OV2640 and OV7670 cameras, built-in flash
Support image WiFi upload
Support TF card
Support multiple sleep modes
Embedded Lwip and FreeRTOS
Support STA/AP/STA AP working mode
Support Smart Config/AirKiss one-click distribution network
Support secondary development
What's in the box?
1 x ESP32-cam board
1 x pigtail
1 x antenna
Raspberry Pi 400 is a complete Raspberry Pi 4-based personal computer, fully integrated into a keyboard for ease of setup and use.

What is in this box?
- The Raspberry Pi 400 with US keyboard
- The Official Raspberry Pi 3A USB type C Power Supply
- The Official Raspberry Pi micro USB to USB 1m HDMI cable
- The Official Raspberry Pi Beginner's Guide
- The Official Raspberry Pi Red/White USB mouse
- Sandisk uSD with Raspberry Pi OS pre-installed

Overview
Featuring a quad-core 64-bit processor, wireless networking, dual-display output and 4K video playback, Raspberry Pi 400 is a complete personal computer, built into a compact keyboard.
Raspberry Pi 400 is ideal for surfing the web, creating and editing documents, watching videos, and learning to program using the Raspberry Pi OS desktop environment.
Raspberry Pi 400 is available in a number of different regional variants and as either a computer kit, containing everything you need to get started (except for a TV or monitor), or a computer unit only.
Raspberry Pi 400 for working and learning at home

Specifications
Processor: Broadcom BCM2711 quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.8GHz
RAM: 4GB LPDDR4-3200
Connectivity: Dual-band (2.4GHz and 5.0GHz) IEEE 802.11b/g/n/ac wireless LAN, Bluetooth 5.0, BLE Gigabit Ethernet
2 × USB 3.0 and 1 × USB 2.0 ports
GPIO Horizontal 40-pin GPIO header
Video & sound: 2 × micro HDMI ports (supports up to 4Kp60)
Multimedia: H.265 (4Kp60 decode);
H.264 (1080p60 decode, 1080p30 encode);
OpenGL ES 3.0 graphics
SD card support: MicroSD card slot for operating system and data storage
Keyboard: 78- or 79-key compact keyboard (depending on
regional variant)
Power: 5V DC via USB type C connector
Operating temperature: 0°C to 50°C
Dimensions: 286 mm × 122 mm × 23 mm (maximum)
Compliance: For a full list of local and regional product approvals, please visit
www.raspberrypi.org/documentation/hardware/raspberrypi/conformity.md

WARNINGS
• Any external power supply used with Raspberry Pi 400 shall comply with relevant regulations and
standards applicable in the country of intended use.
• This product should be operated in a well-ventilated environment and should not be covered when
being operated.
• The connection of incompatible devices to Raspberry Pi 400 may affect compliance, result in damage to the unit, and invalidate the warranty.
• There are no user-serviceable parts inside Raspberry Pi 400, and opening the unit is likely to damage the product and will invalidate the warranty.
• All peripherals used with this product should comply with relevant standards for the country of use
and be marked accordingly to ensure that safety and performance requirements are met. These
articles include, but are not limited to, mice, monitors and cables when used in conjunction with
Raspberry Pi 400.
• The cables and connectors of all peripherals used with this product must have adequate insulation so that relevant safety requirements are met.
• Prolonged exposure to direct sunlight may cause discoloration.
SAFETY INSTRUCTIONS
To avoid malfunction or damage to this product please observe the following:
• Do not expose to water or moisture whilst in operation.
• Do not expose to heat from any source; Raspberry Pi 400 is designed for reliable operation at normal ambient temperatures.
• Take care whilst handling to avoid mechanical or electrical damage to the computer.
Accreditation

POE | integrates 802.3af-compliant PoE circuit (5V/2.5A) | |
---|---|---|
USB | 4x USB 3.2 Gen1 ports Micro USB port | |
Ethernet | Gigabit Ethernet RJ45 with PoE support | |
Header | Color-coded 40PIN GPIO header | |
Fan | 5V / 12V standard fan connector | |
Power Input | 7V~36V | |
CM4 Socket | suitable for all variants of Compute Module 4 | |
RTC | Real-time clock with battery socket and ability to wake Compute Module 4 | |
Video | 2x MIPI DSI display FPC connectors (22-pin 0.5 mm pitch cable) | |
Camera | 2x MIPI CSI-2 camera FPC connectors (22-pin 0.5 mm pitch cable) | |
SD card slot | MicroSD card socket for Compute Module 4 Lite (without eMMC) variants | |
Dimensions | 160 × 90mm |
Standard CM4 socket and color-coded Raspberry Pi 40PIN GPIO header suitable for all variants of Compute Module 4
Onboard connectors including CSI/DSI/RTC/HDMI/USB/ETH/TF card
What's On Board?
- CM4 socket
suitable for all variants of Compute Module 4 - Power input
7~36V wide range power supply - Gigabit Ethernet connector
Gigabit Ethernet RJ45 with PoE support - USB SLAVE port
allows burning system image into Compute Module 4 eMMC variants - USB3.2 ports
4x USB 3.2 Gen1 ports, for connecting sorts of USB devices - HDMI ports
2x HDMI ports, supports dual 4K 30fps output - RTC
RTC battery holder, allows RTC-related functions like wakeup, shutdown, reboot, and more - CAM
2x MIPI CSI camera ports - DISP
2x MIPI DSI display port
- FAN
for connecting cooling fan, allows speed adjustment and measurement - FAN power selection
5V or 12V voltage to drive the fan - IO-VREF/PoE selection
CM4 IO logic level: 3.3V or 1.8V
PoE: enable (EN) or disable (DIS) - 40PIN GPIO header
- CAM0 and DISP0 I2C bus
fit the jumpers when using CAM0 or DISP0 - Misc configurations
- Dual LED indicators
red: Raspberry Pi power indicator
green: Raspberry Pi operating statusindicator - TF card slot (bottom side)
insert a Micro SD card with pre-burnt system, to start up Compute Module 4 Lite
Outline dimensions

Description:
Metal Box for CM4 IO Board Type A
- Designed for Raspberry Pi Compute Module 4 IO Board
- Mini computer chassis, robust and dust-proof, professional look
- Make it easy to build your own Raspberry Pi CM4 mini PC
- Precise cut-out with clear label
- Each cut-out is completely aligned with the connector


Comes with cooling fan, combined with the airflow vent, better heat dissipation

Wall mount support on two sides

Outline dimensions

The Pico-RTC-DS3231 is a RTC expansion module specialized for Raspberry Pi Pico. It incorporates high precision RTC chip DS3231 and uses I2C bus for communication. More external sensors are allowed to be connected thanks to the stackable design.
- Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series
- Onboard high precision RTC chip DS3231, with backup battery holder
- Real-Time Clock Counts Seconds, Minutes, Hours, Date of the Month, Month, Day of the Week, and Year with Leap-Year Compensation Valid Up to 2100
- Optional format : 24-hour OR 12-hour with an AM/PM indicator
- 2x programmable alarm clock
- Comes with development resources and manual (Raspberry Pi Pico C/C and MicroPython examples)
Operating voltage | 3.3V |
---|---|
Backup battery voltage | 2.3V ~ 5.5V |
Operating temperature | -40°C ~ 85°C |
Power consumption | 100nA (sustains data and clock information) |
Raspberry Pi Pico header compatibility
Onboard female pin header for direct attaching to Raspberry Pi Pico Stackable design

Raspberry Pi Pico is NOT included.
What's On Board

- DS3231
high precision RTC chip, I2C bus - RTC backup battery
supports CR1220 button cell - Power indicator
enabled by soldering a 0Ω resistor on the jumper, disabled by default
Pinout definition

Outline dimensions

Resources & Services
The Pico-10DOF-IMU is an IMU sensor expansion module specialized for Raspberry Pi Pico. It incorporates sensors including gyroscope, accelerometer, magnetometer, baroceptor, and uses I2C bus for communication.
Combined with the Raspberry Pi Pico, it can be used to collect environment sensing data like temperature and barometric pressure, or to easily DIY a robot that detects motion gesture and orientation.
- Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series
- Onboard ICM20948 (3-axis gyroscope, 3-axis accelerometer, and 3-axis magnetometer) for detecting motion gesture, orientation, and magnetic field
- Onboard LPS22HB barometric pressure sensor, for sensing the atmospheric pressure of the environment
- Comes with development resources and manual (Raspberry Pi Pico C/C and MicroPython examples)
Operating voltage | 5V |
---|---|
accelerometer | resolution: 16-bit measuring range (configurable): ±2, ±4, ±8, ±16g operating current: 68.9uA |
gyroscope | resolution: 16-bit measuring range (configurable): ±250, ±500, ±1000, ±2000°/sec operating current: 1.23mA |
magnetometer | resolution: 16-bit measuring range: ±4900µT operating current: 90uA |
baroceptor | measuring range: 260 ~ 1260hPa measuring accuracy (ordinary temperature): ±0.025hPa measuring speed: 1Hz - 75Hz |
Raspberry Pi Pico header compatibility
Onboard female pin header for direct attaching to Raspberry Pi Pico
Stackable design

- ICM20948
9-axis motion sensor, I2C bus - LPS22HB
barometric pressure sensor, I2C bus - RT9193-33
3.3V linear voltage regulator - LSF0204PWR
4-ch voltage translator
- RT9193-18
1.8V linear voltage regulator - Power indicator
- Raspberry Pi Pico header
for attaching to Raspberry Pi Pico, stackable design
Two sets of standard Raspberry Pi Pico GPIO male headers
Features at a glance
- Standard Raspberry Pi Pico female header for direct attaching Raspberry Pi Pico (if male header soldered), or just through jumper wires
- Two sets of 2x20 male header, allows connecting more Raspberry Pi Pico expansion modules
- Clear pinout labels on the front side, easy to use
- Immersion gold process, beautiful & practical, stunning aesthetic looking
Center female pin header for direct attaching the Raspberry Pi Pico
Allows connecting more Raspberry Pi Pico expansion modules
Raspberry Pi Pico and expansion modules are NOT included.
Immersion gold process
Black base panel, white pinout labels, golden rounded outline, stunning aesthetic
Outline dimensions
What's in the box?:
1 x Dual GPIO Expander
Four sets of standard Raspberry Pi Pico GPIO male headers, USB-powered support
- Standard Raspberry Pi Pico female header for direct attaching Raspberry Pi Pico (if male header soldered), or just through jumper wires
- Four sets of 2x20 male header, allows connecting more Raspberry Pi Pico expansion modules
- USB power input connector, ensures sufficient power supply for multiple expansion modules
- Clear pinout labels on the front side, easy to use
- Immersion gold process, beautiful & practical, stunning aesthetic looking
Center female pin header for direct attaching the Raspberry Pi Pico
Allows connecting more Raspberry Pi Pico expansion modules
Extra USB connector for external power supply
Raspberry Pi Pico and expansion modules are NOT included.
Black base panel, white pinout labels, golden rounded outline, stunning aesthetic
Outline dimensions
Is it time to try your hand at making your own prototyping board? One Side Copper Clad are one of the most commonly produced boards as they are very simple to use.
Specifications:
- Panel Size: 100x150x0.8mm
- Thickness: 0.8mm
- Layers: Single Sided
- Operating Temperature: Up to 140 °C or 285°F
Package includes:
1 x One-Sided Copper Clad PCB Board
Resources:
Introduction to soldering
Video: How to solder properly
The secrets to good soldering
The CC2531 USB dongle is a fully operational USB device which provides a PC interface to IEEE802.15.4 / ZigBee applications, comes with a CC2531ZNP-Prod firmware, the dongle can be plugged directly into your PC/Raspberry etc used as a Zigbee packet sniffer.

Features:
Flashed with CC2531ZNP-Prod firmware for zigbee2mqtt application Lead out 8 IO connectors Debug interface Size: 5.6*1.6*0.7cm Two buttons and two LEDs for user interaction
Maker Pi Pico Base incorporates the most wanted Reset button for your Raspberry Pi Pico and gives you access to all GPIO pins on two 20 ways pin-headers, with clear labels. Each GPIO is coupled with an LED indicator for convenient code testing and troubleshooting. The bottom layer of this board even comes with a comprehensive pinout diagram showing the function of each pin.


It is a compact yet feature-packed board designed to sit at the heart of your STEM & robotics projects. Just use the jumper wires and/or Grove cables to connect any sensor and output modules to expand its capability. No soldering required!


Maker Pi Pico Base can be programmed with CircuitPython, MicroPython & C/C . Just connect to any computer (including Raspberry Pi SBC) via USB, then drag and drop the file onto it to upload the program. It's as easy as copying a file into your thumb drive!
Board Layout:

Features:
- Work out-of-the-box. No soldering!
- Access to all Raspberry Pi Pico's pins on two 20 ways pin headers
- LED indicators on all GPIO pins
- 3x programmable push button (GP20-22)
- 1x RGB LED - NeoPixel (GP28)
- 1x Piezo buzzer (GP18)
- 1x 3.5mm stereo audio jack (GP18-19)
- 1x Micro SD card slot (GP10-15)
- 1x ESP-01 socket (GP16-17)
- 6x Grove port
Dimensions:

- 1 x Maker Pi Pico
Note Raspberry Pi Pico NOT included. Please purchase separately here.
Ideal for controlling robotic arm or hexapod walker
- Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards
- Up to 16-Channel servo/PWM outputs, 16-bit resolution for each channel
- Integrates 5V regulator, up to 3A output current, allows battery power supply from the VIN terminal
- Standard servo interface, supports common used servo such as SG90, MG90S, MG996R, etc.
- Exposes unused pins of Pico, easy expansion
- Comes with development resources and manual (Raspberry Pi Pico C/C and MicroPython examples)
Operating voltage | 5V (Pico) or 6~12V (VIN terminal) | Servo voltage level | 5V |
---|---|---|---|
Logic level | 3.3V | Control interface | GPIO |
Mounting hole size | 3.0mm | Dimensions | 65 × 56mm |
Raspberry Pi Pico header compatibility
onboard female pin header for direct attaching to Raspberry Pi Pico
supports common used servo like: SG90, MG90S, MG996R
flexible power options: powered from Pico directly,
or from VIN battery input terminal with max 3A current output
Application example
What's in the box?
1 x Relay
1 x Grove connector