Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
R1,089.90  Inc VAT
R519.90  Inc VAT
OS releases from Bullseye onwards will no longer support the older camera system and applications. There is no Python interface yet. An alternative to the old Picamera, imaginatively named Picamera2, is in development. Raspberry Pi OS Buster is still available to download if you’re not ready to use Bullseye
R379.90  Inc VAT
Wide Angle – Camera Module for Raspberry Pi Zero (zero cam wide angle)

How to use Picamera with Raspberry Pi OS Bullseye: https://www.youtube.com/watch?v=E7KPSc_Xr24&list=WL&index=2

Description:

This minimal camera for the Pi Zero (or Pi Zero W, WH, 2W) is perfect for small camera projects where space is at a premium.

The sensor is 5MP, and the whole shebang is mounted on a flexible circuit board. As such, a little care is needed when handling, just like the connector on the Pi Zero. Easy there, Lennie!

Otherwise it's an economical and svelte solution for bird box cameras, body-cams, home security, and simple computer vision projects.

Now with 160 degree wide angle lens

Features

  • 5MP sensor, 2592x1944 pixels (same as version 1 official Pi camera)
  • 1080p video at 30 FPS (or 60 FPS at 720p, 90 FPS at 480p)
  • f2.9 lens, 3.60 mm focal length
  • 53.50 degrees horizontal, 41.41 degrees vertical field of view
  • Approx. dimensions of circuit and camera: 60 x 11.4 x 5.1mm

Notes

  • Only for Raspberry Pi Zero or Zero W with CSI camera port
  • Raspberry Pi Zero not included
What's in the box:

1 x Camera module

Getting started with PiCamera
R329.90  Inc VAT
R359.90
Raspberry Pi Camera Board Replacement Cable 150mm (Cam cable 150mm)
Description:

The Raspberry Pi Camera Module comes fully assembled with a 15-Way 150mm flat, flex cable that plugs directly in the Raspberry Pi CSI port. Unfortunately the included cable is quite fragile, and can break if twisted or bent too far.
 
Don't worry though, not all is lost if that cable does happen to break! Replacement raspberry pi camera board cables are available and it's very easy to swap them over!
 
This replacement cable is 150mm long.
 
The Raspberry Pi Camera Board Replacement Cable Features:
  • Direct Replacement for the Raspberry Pi Camera Board Cable
  • 150mm Overall Length
  • 1mm Pitch
  • 15 Way Flat Cable
  • Conductor: Tin plated copper
  • Insulation: White PVC
  • Supporting tape: Blue polyester
  • UL rating: UL2896
  • Temperature rating: 80°C
  • Voltage: 30V
  • Flame test: VW-1, FT1, FT2
  • CSA Standard: CAN/CSA-22.2 No.210.2 
R14.90  Inc VAT
16mm telephoto camera lens (16mm telephoto lens)
16mm telephoto camera essential lens for Raspberry Pi HQ Camera. It has a wide field of view and a variety of uses, like CCTV applications, or of course, cat photos.

ModelPT3611614M10MP
Image format1"
Focal length16mm
ApertureF1. 4-16
MountC
Field angle1"       44.6°  x 33.6°
2/3"    30.0° x 23.2°
1/1.8" 24.7° x 18.6°
1/2"    21.8° x 16.4°
Back focal length17.53mm
Optical length67.53mm
M.O.D.0.20m
Dimensions39.00 x 50.00mm
Weight133.7g
R1,089.90  Inc VAT
6mm wide angle camera lens (6mm wide lens)
Description:

6mm Wide angle camera lens for Raspberry Pi HQ camera
The Raspberry Pi High Quality Camera is the latest camera accessory. This is the 6mm wide angle camera Lens, an essential for the Raspberry Pi High Quality Camera. No lens shading, no dark corners, decent image quality, it just works.

Specifications:

ModelPT361060M3MP12
Focal length6mm
Resolution3 MegaPixel
ApertureF1.2
MountCS
Field angle DxHxV(°)63°
M.O.D.0.2m
Back focal length7.53mm
Dimensions30 x 34mm
Weight53g
OperationManual
R519.90  Inc VAT
The Official Raspberry Pi Camera Guide (cam guide)
Synopsis

One of the most popular add-ons for the Raspberry Pi, the official Camera Module – or the new High Quality Camera – turns your favourite single-board computer into a powerful digital camera.
Launched back in 2013, the original Camera Module was succeeded by the higher-spec v2 in April 2016. The High Quality Camera, due to launch on 30 April 2020, offers Ultra HD image resolution and enables you to attach any standard C- or CS-mount lens.

In this book we show readers how to get started with their Raspberry Pi camera, taking photos and videos from the command line and writing Python programs to automate the process. We’ll reveal how to create time-lapse and slow-motion videos, before moving on to a range of exciting
projects. There are just so many things that can be done with a Raspberry Pi camera!

• Learn how to set up the new High Quality Camera, attach a
lens, and start capturing images
• Take selfies and shoot stop-motion videos
• Build a wildlife camera and also an underwater one
• Make a smart door with a video doorbell
• Set up a security camera to monitor your home
• And much more!
R219.90  Inc VAT
Raspberry Pi4 Mounting Plate for High Quality Camera (HQ pi4 mount plate)

Note: The Raspberry PiHigh Quality Camera and flexible tripod not included)

Description

An affordable, simple solution to mounting your Raspberry Pi to your Raspberry Pi High Quality Camera.

Easy to assemble, the plate attaches to your High Quality Camera on one side, and your Raspberry Pi mounts to the other side – spacers and fixings are included in the pack.

Available for different Raspberry Pi models

It’s a lightweight and minimal way to keep your Raspberry Pi and High Quality Camera together, which saves any fuss with camera cable lengths and cases.

HATs and pHATs can still be mounted to your Raspberry Pi, meaning you can create amazing projects with screens, buttons, RTCs or any others.

Combine with our affordable flexible tripod for a great project foundation!

 Kit contents:

  • 1x Mount plate
  • 4x 6mm female-female nylon spacers
  • 8x M2.5 nylon nuts
  • 8x 5mm M2.5 nylon screws
  • 4x 10mm M2.5 nylon screws

Assembly:

Assembly guide available here!

R69.90  Inc VAT
Raspberry Pi ZERO Mounting Plate for High Quality Camera (HQ ZERO mount plate)

Note: The Raspberry PiHigh Quality Camera and flexible tripod not included)

Description

An affordable, simple solution to mounting your Raspberry Pi to your Raspberry Pi High Quality Camera.

Easy to assemble, the plate attaches to your High Quality Camera on one side, and your Raspberry Pi mounts to the other side – spacers and fixings are included in the pack.

Available for different Raspberry Pi models

It’s a lightweight and minimal way to keep your Raspberry Pi and High Quality Camera together, which saves any fuss with camera cable lengths and cases.

HATs and pHATs can still be mounted to your Raspberry Pi, meaning you can create amazing projects with screens, buttons, RTCs or any others.

Combine with our affordable flexible tripod for a great project foundation!

 Kit contents:

  • 1x Mount plate
  • 4x 6mm female-female nylon spacers
  • 8x M2.5 nylon nuts
  • 8x 5mm M2.5 nylon screws
  • 4x 10mm M2.5 nylon screws

Assembly:

Assembly guide available here!

R69.90  Inc VAT
WS 25mm Telephoto Lens for Raspberry Pi High Quality Camera (WS 25mm Lens)
Description:

25mm C-mount Telephoto lens for Raspberry Pi High Quality Camera

Shorten the distance

25mm focal length high definition telephoto lens, capturing every tiny details



Multi field angle options

Brings the beautiful world into your vision



Fitting to the Camera

Fitting the lens to Raspberry Pi High Quality Camera




Working with Raspberry Pi







R769.90  Inc VAT
WS 35mm Telephoto Lens for Raspberry Pi High Quality Camera (WS 35mm Lens)
Description:

35mm C-mount Telephoto lens for Raspberry Pi High Quality Camera

Shorten the distance

35mm focal length high definition telephoto lens, capturing every tiny details



Multi field angle options

Brings the beautiful world into your vision



Fitting to the Camera

Fitting the lens to Raspberry Pi High Quality Camera




Working with Raspberry Pi









R969.90  Inc VAT
ESP32-CAM WiFi Module ESP32 serial Development Board 5V Bluetooth with OV2640 Camera Module (ESP32 CAM)
Description:

The ESP32-CAM is a small size, low power consumption camera module based on ESP32. It comes with an OV2640 camera and provides onboard TF card slot. The ESP32-CAM can be widely used in intelligent IoT applications such as wireless video monitoring, WiFi image upload, QR identification, and so on.

Specifications:

Low-power dual-core 32-bit CPU for application processors
Main frequency up to 240MHz, computing power up to 600 DMIPS
Built-in 520 KB SRAM, external 4M PSRAM
Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
Support OV2640 and OV7670 cameras, built-in flash
Support image WiFi upload
Support TF card
Support multiple sleep modes
Embedded Lwip and FreeRTOS
Support STA/AP/STA AP working mode
Support Smart Config/AirKiss one-click distribution network
Support secondary development

What's in the box?

1 x ESP32-cam board
1 x pigtail
1 x antenna
R169.90  Inc VAT
1080p Full-HD USB Webcam with Built-in Microphone (1080p Webcam)
Description

This 1080p Full-HD USB webcam is the perfect add-on if you want to use your Raspberry Pi for video calls using popular services such as Zoom, Skype and Google Hangouts (Google Meet).

This article from Raspberry Pi shows you how to easily use a USB webcam with these popular services, which we've tested ourselves in the office with great results. Combined with the small, light and mobile Raspberry Pi, you can now meet with friends and colleagues in any room in the house!

Simply plug this into your Raspberry Pi's USB port and enjoy high-definition work video calls, chats with friends...or simply take some simple photography or video clips.

The camera has a built-in microphone with noise-cancelling technology for clearly capturing your voice, so no additional audio capture device is necessary. It also features an anti-glare lens and a 360-degree swivel on top of a stable mounting clip which fits on top of desks, laptops and monitors.

Features

  • Model number: A4Tech PK-910H
  • 1080p Full-HD Webcam
  • Still images: Up to 16 Megapixels (4608x3456 software interpolated)
  • Video resolution: Up to 2 Megapixels
  • Frame rate: 30fps
  • Interface: USB 2.0
  • Microphone: Built-in
  • Cord length: 150cm
  • Power rating: 5V 230mA
  • Works with Raspberry Pi, Windows and Mac

Raspberry Pi board not included

R699.90  Inc VAT
Raspberry PI camera adjustable mounting bracket for camera V2 (V2 camera mount plates)
Please note: The camera and cable is not included

Description:

Designed for the hole pattern of the RPi Camera Module v2.
Adjustable Pi Camera mount is a great accessory for Pi shutterbugs. Little screws attach the Pi Camera solidly and the design allows for multiple positions. 





  • Allows four different angles of repose
  • Four Screws to secure your camera
  • Made from black acrylic
  • hole for tripod mounting

R69.90  Inc VAT
IMX219-77 Camera 77° FOV for Jetson Nano (Jetson camera imx219-77)

IMX219-77 Camera Features

  • Supports NVIDIA Jetson Nano Developer Kit, Compute Module 3/3
  • 8 Megapixels
  • Sensor: Sony IMX219
  • Resolution: 3280 × 2464
  • Lens specifications:
    • CMOS size: 1/4inch
    • Aperture (F): 2.0
    • Focal Length: 2.96mm
    • Angle of View (diagonal): 77 degree
    • Distortion: < 1%
    • Lens dimensions: 6.5mm × 6.5mm
  • 4 screw holes
    • Used for attachment
    • Provides 3.3V power output
  • Dimension: 25mm × 24mm

Applications

Combined with the Jetson Nano AI computer, this camera suits for AI projects such as:

  • Face recognition
  • Road mark detection
  • License plate recognition

Development Resources

Wiki: www.waveshare.com/wiki/IMX219-77_Camera

OS releases from Bullseye onwards will no longer support the older camera system and applications. There is no Python interface yet. An alternative to the old Picamera, imaginatively named Picamera2, is in development. Raspberry Pi OS Buster is still available to download if you’re not ready to use Bullseye
R379.90  Inc VAT
Raspberry Pi Camera Board Replacement Cable 2000mm (Cam cable 2000mm)
Description:

The Raspberry Pi Camera Module comes fully assembled with a 15-Way 2000mm flat, flex cable that plugs directly in the Raspberry Pi CSI port. Unfortunately the included cable is quite fragile, and can break if twisted or bent too far. 
Don't worry though, not all is lost if that cable does happen to break! Replacement raspberry pi camera board cables are available and it's very easy to swap them over!

This replacement cable is 2000mm long.

The Raspberry Pi Camera Board Replacement Cable Features:
  • Direct Replacement for the Raspberry Pi Camera Board Cable
  • 2000mm Overall Length
  • 1mm Pitch
  • 15 Way Flat Cable
  • Conductor: Tin plated copper
  • Insulation: White PVC
  • Supporting tape: Blue polyester
  • UL rating: UL2896
  • Temperature rating: 80°C
  • Voltage: 30V
  • Flame test: VW-1, FT1, FT2
  • CSA Standard: CAN/CSA-22.2 No.210.2
What's in the box:

1 x 2000 mm Raspberry Pi Camera cable
R34.90  Inc VAT
8-50mm Zoom Lens for Raspberry Pi High Quality Camera (8-50mm zoom lens )
Description:

Quality Industrial Zoom Lens, 8-50mm Adjustable Focal Length, Adjustable Angle of View, C-mount, Compatible with Raspberry Pi High Quality Camera
8-50mm Zoom Lens

8-50mm C-mount Zoom lens for Raspberry Pi High Quality Camera

Flexible zoom in & out

8-50mm adjustable focal length, flexible photo composition at your will

Adjustable focal length
Fitting to the Camera

Fitting the lens to Raspberry Pi High Quality Camera (C-CS adapter required)

Working with Raspberry Pi
Outline Dimensions

Resources:


What's in the box:

1 x 8-50mm Zoom Lens
R839.90  Inc VAT
PIR Camera Case for Raspberry Pi 4 (Pi4 cam case pir)
Description

The PIR Camera Case makes it easy to create a motion-sensing camera project with your Raspberry Pi 4.

It's the perfect case for anyone wishing to make an indoor security camera, pet monitor, baby monitor, office cam or any other project where you'd like to use a camera module to record whoever (or whatever!) moves in front of your camera. The case comes with the PIR module and wires.

Please note:
Only compatible with the official Raspberry Pi Camera Module Raspberry Pi and camera module not included!

Mounted PIR and Camera Module
The case comes with the PIR module and wires included. The PIR module is neatly mounted to the front of the case and the three PIR wires connect directly to the Raspberry Pi GPIO pins (5V, GND and GPIO 17). The camera module (not included) is also mounted to the front of the case, and connected in the usual way (CSI connector), with the ribbon cable neatly tucked into the case. A clear lens ring protects your camera from any unexpected knocks or bumps.

Easy to Code
Coding the project is super-simple, and to help you get started we've created a GitHub repository dedicated to this case. The GitHub repository takes you through setup, basic commands and full Python project examples showing the PIR module and camera working together.

You can expand on these however you like, adding other functions such as cloud storage upload, video effects, alerts and more!

Please remember PIR sensors can be temperamental (and can also be impacted by WiFi, heat and other interference) so will need some tweaking to reduce excessive false triggers.

Compatability

We include two sets of side panels to make this case compatible with both the Raspberry Pi 4.

In the box

  • Case panels
  • Lens protector ring
  • Fixings pack
  • PIR sensor
  • PIR cable

Example Scripts and Resources

Case Assembly Guide

Features

  • Compatible with the Raspberry Pi 4
  • Laser-cut high quality "stealth" matt black perspex
  • PIR module and wires included
  • Camera protection ring
  • Example code available
  • Easy assembly
  • Enables access to all Raspberry Pi ports
  • Includes all required fixings
  • Manufactured in the UK

Please note: Raspberry Pi and Camera Module not included. Wall mounting bracket not included.

R319.90  Inc VAT
Pro Mini Camera Mount for Raspberry Pi Zero (pro mini cam mount zero)
Description:

Raspberry Pi, Camera, cables and tripod not included!

We designed this mount to create an affordable, tripod-compatible solution to help you monitor "things" with your Pi Zero and Official Raspberry Pi Camera Module - great for keeping an eye on 3D prints, monitoring rooms, access points, timelapsing plants and more!

You don't need to mount it on a tripod as it will happily sit on a desk or shelf, but it has a 1/4" hole ready in case you do (you'll need a nut as this isn't threaded).

There are some great ready-to-go software/OS options out there for these kinds of projects, such as OctoPrint for 3D printers and MotionEyeOS for turning your Pi and camera module into an IP camera. Both of these options allow viewing on your smartphone too!

The mount comes as a kit which requires some simple assembly.

Other Parts Required

This listing is for the mount only which includes the laser-cut Perspex parts and fixings. You will also need:

Optional Parts

Fancy mounting this on a tripod? You'll need the following parts:


What's in the box:

2 Perspex layers and a bag of fixings

Resources
R89.90  Inc VAT
The Essential Guide To Landscapes (book landscapes)
Description

From the makers of Digital SLR Photography magazine, The Essential Guide To Landscapes is the complete guide to shooting your best ever landscape images. It’s 164 pages of essential photo technique, expert advice, and inspiration.



From learning the basics through to more involved techniques, The Essential Guide To Landscapes is packed with expert advice, photo workshops, and stunning photography to help photographers of all levels achieve their best ever results.



• Achieve maximum levels of image quality and detail
• Master camera controls and shoot like the pros
• Essential photo kit: our pick of the best ND filters and carbon tripods
• Location workshops, composition and lighting, coastal landscapes, and more!



What's in the box?

1 x Guide to landscapes photography book
R109.90  Inc VAT
ArduCam 16MP IMX519 Autofocus Camera Module for RPi and Jetson (Arducam 16MP)
Description

Arducam High-Resolutions Autofocus camera is an exclusive camera board that takes what Raspberry Pi V1, V2, and HQ have to offer, and excels in every single aspect.

It takes zero compromises in specs. With a resolution of 16 megapixels (compared to 8MP and 12MP), an autofocus lens, a V2-like form factor, and boatloads of improvements, the camera provides a better choice for a whole world of industrial/consumer/etc. applications, it’s compatible with any existing Pi models, works with the latest software from the foundation, and leverages the same tuning algorithms used in the official camera modules.



Check out this  review by Jeff Geerling and his video https://youtu.be/j2S8sZoH36Y

16MP Camera Module for All Pis.

2 times higher resolution than the v2 camera, 40% higher than the HQ camera. Based on the 16MP Sony IMX519 sensor, this new camera module gives all Raspberry Pi hackers every bit of power they need to build future-proof projects.



V1/V2 Size, with Autofocus.

The community has been craving autofocus in Pi cameras, so Arducam took the advice. This camera has the classic V1/V2 form-factor so you can add hassle-free upgrades to your existing projects, or build new applications with the best flexibility on cameras.



Crisper Images/Videos Than The HQ Camera.

It’s not just the resolution bump, the “quality” is way higher than the HQ Camera too. With the same camera tuning algorithms from the foundation, this module beats the Raspberry Pi HQ camera in every aspect. (sharpness/saturation/exposure/etc.)



Safety instructions:

  • Before connecting, you should always power the Raspberry Pi off and remove the power supply first.
  • Make sure the cable on the camera board is locked in place.
  • Make sure the cable is correctly inserted in the Raspberry Pi board’s MIPI CSI-2 connector.
  • Avoid high temperatures.
  • Avoid water, moisture, or conductive surfaces while in operation.
  • Avoid folding, or straining the flex cable.
  • Avoid cross-threading with tripods.
  • Gently push/pull the connector to avoid damaging the printed circuit board.
  • Avoid moving or handling the printed circuit board excessively while it’s in operation.
  • Handle by the edges to avoid damages from electrostatic discharge.
  • Where the camera board is stored should be cool and as dry as possible.
  • Sudden temperature/humidity changes can cause dampness in the lens and affect the image/video quality.

 

Specifications:

  • Sensor: Sony IMX519 stacked, back-illuminated sensor 16 megapixels 1.22 µm × 1.22 µm pixel size7.103 mm diagonal (Type 1/2.534)
  • Output: RAW10/8, COMP8
  • Lens: Autofocus;  f/1.75; EFL: 4.28; FoV: 80°; Focus Range: 10 cm ~ infinite
  • IR cut Filter: Integrated
  • Tripod mount: 1/4”-20
  • Enclosure: ABS, also compatible w/ camera module v1 & v2.
  • Ribbon Cable Length: 150mm

 

What's in the box?

  • 1 x ArduCam 16MP IMX519 Autofocus Camera Module for RPi with case
  • 1 x 15cm ribbon cable

 

Resources:

R689.90  Inc VAT
3 in 1 Clip-On Camera Lens Set (camera lens clip-on kit)

Description

This lovely little lens set is the best way to easily expand the field of view of your Raspberry Pi camera!
 

This lens kit means that you can use your camera module in many exciting ways:

  • 1x Wide-angle lens: Ideal for capturing those landscape shots/night sky time-lapses
  • 1x Macro lens: Beautiful close-up images of anything from insects to circuit boards
  • 1x Fish-eye lens: Security systems and crazy 180° FOV shots

Perfect for taking shots from anywhere from your desk to the edge of space this lens comes with a back splint which means you can also use it with other camera devices such as your mobile phone.

Each lens screws into the clip which fits perfectly onto your camera module.

Features

  • Compatible with the known universe *
  • High-class glass lens, high clarity.
  • No vignetting or dark circle.
  • Lens covers to protect the camera lenses
  • Material: ABS & aluminum alloy
  • Compatible with most of the official Raspberry Pi Camera Modules

What's in the box?

1 x camera clip
3 x screw on lenses

R199.90  Inc VAT
Per Page      21 - 40 of 47