Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
R110.50  Inc VAT
R153.90
These VESA mounting brackets enable you to mount a oneninedesign Raspberry Pi 3 case to the back of a display or monitor using the VESA attachment points
R59.90  Inc VAT
The Flirc Raspberry Pi case was designed to not only be functional for your Raspberry Pi, but to be drop dead gorgeous with built in heatsink.
R267.10  Inc VAT
R309.90
This case brings together the Raspberry Pi, and IQAudio Pi-DAC+ Audio Board into one simple, neat package.
R150.31  Inc VAT
The Quattro case is designed to house the Raspberry Pi B+/2/3 and a 2.5" hard drive! The case has a square form factor, pop-off top panel and includes 100mm square VESA mounting.
R152.15  Inc VAT
R199.90
This is a NES inspired enclosure for your Raspberry Pi system. It can turn your bare Raspberry Pi PCB into an elaborate gaming console.
R429.90  Inc VAT
Acrylic Case Enclosure for Arduino UNO R3 - Transparent (1B4 Uno Clear Case)
Transparent Acrylic Clear Case For Arduino UNO R3

Features:


Material: Acrylic clear
For Arduino UNO R3 and compatibles
Assembly required

Package includes:

1 x DIY Acrylic Case with screws
R39.90  Inc VAT
Discontinued: Official Raspberry Pi 3B and Pi3B+ Black & Grey Case (AW C4 official case Pi 3 Black/Grey)

PLEASE NOTE: Rapsberry Pi not included.

The Official Raspberry Pi 3 Model B Case is now available! Specially made and beautifully crafted, this nifty and tactile snap-together case is designed to protect your RPi 3! Side pieces can be individually removed to enable access to the GPIO, and the top can also be removed to enable the addition of HATs or other GPIO periphery! There's even LED lights pipes to top it all off!

Features of the Official Raspberry Pi Case

  • Fabulous Raspberry Black and Grey Colour Combination

  • 5 Part "Snap-Fit" Enclosure

  • Cut-outs for all connection points

  • Micro SD card cut-out

  • Plastic LED light protector

  • Stick on rubber feet for case stability

R87.58  Inc VAT
R109.90
Discontinued: Multicomp Pi-BLOX Case - Black (AW C4 Pi-Blox black)

Please Note: Raspberry Pi and camera not included.

The Pi-Blox Lego® Compatible Case for Raspberry Pi and camera is a great addition to your Raspberry pi arsenal. This enclosure is not only a good way of protecting your Raspberry Pi board but it is fully compatible with the Lego® building block system!!

It stacks top and bottom (standard Lego® fixings on base and lid) and features all the necessary openings for connectors and ports and includes mounts for the Pi camera, which can be fitted inside of the case with holes in the lid for the camera lens and flash.

  • Designed for Raspberry Pi B+, Pi 2 or Pi3 and Pi Camera
  • Studs for construction blocks fitting on enclosure
  • All cut-outs are pre-cut into the case
  • I/O Connector accessed via slot in side of enclosure
  • Internal mount points for Pi camera
  • Camera lens and flash holes included
  • Gloss finish
R69.90  Inc VAT
R89.90
VESA-Pi+ Raspberry Pi B+/2/3 VESA Case (AW C4 vesa case)
Please note: The Raspberry Pi is not included

This VESA-Pi+ allows you to attach a Raspberry Pi computer to the back of most 75mm & 100mm HDMI monitors! Its low profile, sleek design is tamperproof and features black sides with clear top and bottom for some added zing! This case is compatible with the Raspberry Pi models B+,2 and 3.
 
The Pi is held in place with screws and stand-offs for a solid connection, and the mount is compatible with both 75mm and 100mm spacing options. The case is sealed on all sides to prevent dust and dirt getting into your Pi!
 
The VESA-Pi+ is an all in one case and mount, and requires no additional components to attach your Pi to your Monitor or TV.
 
VESA-PI+ Features:
  • 6 x Perpex Sheets
  • Mounting Hardware
  • Clear Top & Bottom, so you can see your Pi whirring away!
  • Black side plates
  • VESA 75mm & 100mm M4 Mounting Compatible (Nylon mounting bolts included!)
 
Assembly is super easy, just follow our Assembly Guide!
R110.50  Inc VAT
R153.90
Transparent Acrylic Laminated Case with Cooling System External Fan Raspberry Pi 4/3/2/B/B+ (AW C4 laminated case + fan)
Description:
 
Notice: this acrylic case is a DIY item with loose parts. Assembly required
 
This durable plastic raspberry pi case is a perfect fit for your Raspberry Pi 3/2 Model B and Raspberry Pi Model B +. 
This case comes with a Cooling Fan on top for your cooling needs.
Open ventilation cooling sides provide extreme heat reduction.
 
 
Notice: 
 
Please REMOVE the PROTECTIVE FILM from both sides of the pieces.
Raspberry Pi main board not included!!!!
 
Installation Guide:  
 
1. Mount the bottom cover to the Raspberry Pi 
2. Install the cooling fan onto the top cover 
3. Plug the power cable onto the GPIO port (follow instructions on photo) 
4. Install the top cover 
5. Red cable connects to pin 2(5V)
6. Black cable connects to pin 6(ground)
 
Package includes: 
 
1 x Raspberry Pi case 
1 x Small Screwdriver 
1 x Screw Set 
1 x Raspberry Pi Fan
1 x Fan cover plate
R111.30  Inc VAT
R139.90
Discontinued: SmartiPi Touch Case for the Official Raspberry Pi Display Pi 3B+ (AW C55 smartipi displ case black)

The fabulously designed SmartiPi Touch case provides a neat, sleek and sturdy look for the official Raspberry Pi 7" touch display and Raspberry Pi. The case features a LEGO®* mountable front, camera mount, wall mounts and is fully HAT compliant.

The display is secured into the case with four screws, and a Raspberry 3, Pi 2, B+ or A+ can then be enclosed in the compartment on the back of the case. A simple door covers the the Pi when it is in the compartment and the ribbon cable that comes with the display connects into the Raspberry Pi DSI port. The stand has a pivot that allows you to adjust the angle of the screen, and includes a dual split micro USB cable for powering.

The SmartiPi Touch Case Features

  • A large base with rubber feet to prevent slipping on smooth surfaces.
  • 125° smooth pivot that allows you to adjust the angle of the screen
  • Base holes for stand or wall mounting
  • 75mm M4 VESA mount points on the back in a square pattern
  • The micro USB Y power cable (included) will allow you to power the display and Raspberry Pi simultaneously
  • Includes the popular LEGO® compatible camera case that works with Pi camera version 1 and 2.
  • It has a LEGO® compatible back and can attach to the case on the LEGO® plate on the back or the front.
  • You can even cut out the knockout in the door with a razor blade and use heat sinks with the door.
  • HAT boards can be added to the Pi whilst in situ

*LEGO® is a trademark of the LEGO Group of companies which does not sponsor, authorize or endorse this product.

R512.29  Inc VAT
WS HDMI 10.1" 1280x800 (IPS) (B) Touch Screen & Case (1B3 10.1 Capacitive(B)touch display stand)

New to ModMyPi, Wareshare's 10.1" 1280x800 IPS Touch Screen & Case! It's easy to set up, features a great resolution, comes complete with a black acrylic stand, and has touch by default!

Recent upgrades:
If you were used to seeing the Self Test at power on, this has now been removed. However if you remove the jumper located on the controller board you can re-enable this feature.

This device uses the Pi's HDMI output for display, and the Pi's USB port for touch control. Assembly of the Waveshare 10.1" screen is easy, just follow our simple guide here. Please Note. This device does require some simple set up. You will need a UK to EU power adapter.

The LCD Screen Features:

  • 10.1inch HDMI LCD (B)
  • 1280x800 Resolution
  • UK 5V 2A Power Supply Included
  • Capacitive touch control
  • Supports Raspberry Pi, Ubuntu, Windows 10 IoT driver free
  • Can also be used as a computer monitor, supports Windows 10/8.1/8/7/XP etc.
  • Supports BB Black, comes with Angstrom image
  • HDMI interface for displaying, USB interface for touch control
  • Input interfaces: HDMI
  • Multi languages OSD menu, for power management, brightness/contrast adjustment, etc.
  • Firmware is upgradable to support more new features (continually updated)

The Case Features:

  • Material : High quality black and clear Acrylic
  • Comes with bottom holder, 45° tilt angle
  • Features mounting holes for Raspberry Pi 3B/2B/B+/A+/B, and BB Black


Troubleshooting:


For the Windows OS on PC, the resolution of the LCD is automatically identified. Hence, you do not need to make the relative settings. When working with Raspberry Pi, you should set the resolution of the LCD by yourself, or else the LCD screen will not work.


If the display in not working correctly or not displaying at all, you may need to edit setting in the config file.
    sudo nano /boot/config.txt

And add the following to the end of the file:
    max_usb_current=1
    hdmi_group=2
    hdmi_mode=87
    hdmi_cvt 1280 800 60 6 0 0 0
    hdmi_drive=1

If this does not ressolve the problem then use the following instead:
    max_usb_current=1
    hdmi_group=2
    hdmi_mode=27
    hdmi_drive=1



Downloads

User Manual
Quick Assembly Guide

Wiki


R1,659.90  Inc VAT
VESA Mount for use with oneninedesign Raspberry Pi 3 Case (1B4 19 VESA bracket black)
These VESA mounting brackets enable you to mount a oneninedesign Raspberry Pi 3 case to the back of a display or monitor using the VESA attachment points. Note: Pi case not included.

Each bracket includes a locking clip which can be used to prevent the SD card from being removed from the Raspberry Pi.

Within the mounting bracket there is space to add a 2.5 inch hard drive for additional memory for your Raspberry Pi project.

Includes two M3 screws to attach the oneninedesign case to the mounting bracket as well as the four screws needed to attach to your display.

Suitable for VESA mounting type 100 x 100 mm only. Please ensure that is what your display has available for mounting.
These VESA mounting brackets enable you to mount a oneninedesign Raspberry Pi 3 case to the back of a display or monitor using the VESA attachment points
R59.90  Inc VAT
Discontinued: Raspberry Pi Flirc Case (AW C4 Flirc Case)

New and improved! The Flirc Raspberry Pi 3 case was designed to not only be functional for your Raspberry Pi, but to be drop dead gorgeous. It’s made of beautiful aluminum core that is sandwiched between two black, soft touch shells that feel amazing in your hands. But once it’s out of your hands, it’s deserving to be proudly on display running your favorite media center software!

This is the first affordable Raspberry Pi case made out of aluminum. We wanted to ensure we didn’t sacrifice form over function, so we used the aluminum housing of the case to provide a built in heat sink. Supplied with the case is a thermal pad and 4 screws for the simplest Raspberry Pi case assembly on the market. It only takes seconds to drop your Raspberry Pi into it’s amazing new home and show it off on your counter top.

We included rubber feet to raise the enclosure so it just hovers underneath your television. In addition to the built in heat sink, small ventilation slots on the bottom help keep the Raspberry Pi cool. GPIO pins are accessible through the slot on the bottom of the case and there is no need for disassembly to get to the SD card. We know you will love the attention to detail we put in throughout the case.

The Flirc Raspberry Pi 3 Case Features:

  • Supports the Raspberry Pi B+/2/3/3B+
  • Built in Heat Sinks
  • Raspberry Pi 3 LED Holes
  • Easy Assembly: Place the thermal pad on your Pi, drop your Pi inside the case, and screw the bottom of the case on!
  • SD Card Access
  • Includes Thermal Pad & Rubber Feet
The Flirc Raspberry Pi case was designed to not only be functional for your Raspberry Pi, but to be drop dead gorgeous with built in heatsink.
R267.10  Inc VAT
R309.90
Discontinued: Pibow 3 Coupé Raspberry Pi 3B+ 3B, 2, & Pi 1B+ Ninja (AW C4 Pi 3 Coupe Ninja)

Pibow Coupé. The slim, hackable, and attractive case for the Raspberry Pi!

Replacement layers included for the Pi 3B+

Note: We've redesigned Pibow to be compatible with both the Raspberry Pi 3, 2 and B+. Due to changes in the layout of the Raspberry Pi 3 older Pibows (one's with a 2/B+ label) will not work ideally with Raspberry Pi 3!

Features:

  • Compatible with Raspberry Pi 3, 2 and B+
  • extra venting, and a place for installing a heatsink if you really want to push your Pi
  • Super-slimline profile
  • Fully HAT compatible
  • Protects your beloved Pi!
  • Clear top and base leave Raspberry Pi visible
  • GPIO cut-out with laser-etched pin labels
  • Leaves all ports accessible
  • Made from lightweight high-quality cast acrylic
  • Great for hacking and tinkering!
  • Made in Sheffield, UK

Crafted out of five unique layers including a transparent top and base that leave your beautiful Pi visible inside. Each layer is laser-cut from colourful high-quality cast acrylic and once stacked they securely contain a Raspberry Pi 3, 2 or B+ while leaving the primary ports, including the camera port, display port, and GPIO accessible.

Weighing only 61 grams the case is lightweight and ideal for mounting to any surface. No tools are required for assembly or disassembly.

R144.90  Inc VAT
Discontinued: IQAudio Pi-DAC+ Case for Pi 2 B and Pi 3 B (Clear) (AW C3 Pi-DAC+ clear case)

Raspberry Pi and Pi-DAC+ boards not included

We're pleased to annouce the release of ModMyPi's Pi-DAC+ Case. Specially manufacturer in the UK, this case brings together the Raspberry Pi, and Pi-DAC+ Audio Board into one simple, neat package. Designed to be stylish and functional, the Pi-DAC+ Case enables access for all Pi-DAC+ and Raspberry Pi Ports whilst keeping both boards safe and sound!

The Pi-DAC+ Case Features:

  • Laser Cut Acrylic
  • Easy Assemble Case
  • Manufactured in the UK
  • GPIO Slot
  • Enables Access to all Raspberry Pi & Pi-DAC+ Ports
  • Available in Matt Black or Clear
  • Compatible with the Raspberry Pi 3 Model B, Pi 2 Model B, Raspberry Pi B+ & A+

Pi-DAC+ Case Assembly Guide

R140.22  Inc VAT
Discontinued: IQAudio Pi-DAC+ Case for Pi 2 B and Pi 3 B (Matte Black) (AW C3 Pi-DAC+ black case)

Raspberry Pi and Pi-DAC+ boards not included

We're pleased to annouce the release of ModMyPi's Pi-DAC+ Case. Specially manufacturer in the UK, this case brings together the Raspberry Pi, and Pi-DAC+ Audio Board into one simple, neat package. Designed to be stylish and functional, the Pi-DAC+ Case enables access for all Pi-DAC+ and Raspberry Pi Ports whilst keeping both boards safe and sound!

The Pi-DAC+ Case Features:

  • Laser Cut Acrylic
  • Easy Assemble Case
  • Manufactured in the UK
  • GPIO Slot
  • Enables Access to all Raspberry Pi & Pi-DAC+ Ports
  • Available in Matt Black or Clear
  • Compatible with the Raspberry Pi 3 Model B, Pi 2 Model B, Raspberry Pi B+ & A+

Pi-DAC+ Case Assembly Guide

This case brings together the Raspberry Pi, and IQAudio Pi-DAC+ Audio Board into one simple, neat package.
R150.31  Inc VAT
Official Raspberry Pi 2 Red & White Case (AW C4 official case Pi2)

PLEASE NOTE: This case is for the Pi2 and not the Pi3

The Official Raspberry Pi Foundation's Raspberry Pi Case is now available! Specially made and beautifully crafted, this nifty and tactile snap-together case is designed to to protect both the Pi B+ and Pi 2 B! Side pieces can be individually removed to enable access to the GPIO, and the top can also be removed to enable the addition of HATs or other GPIO periphery! There's even LED lights pipes to top it all off!

Designed by Kinneur Dufort you can read all about the design process from the Raspberry Pi Foundation's blog here

Features of the Official Raspberry Pi Case

  • Fabulous Raspberry Red and White Colour Combination

  • 5 Part "Snap-Fit" Enclosure

  • Cut-outs for all connection points

  • Micro SD card cut-out

  • Plastic LED light protector

  • Stick on rubber feet for case stability

R49.90  Inc VAT
Discontinued: Pibow 3 Coupé (Raspberry Pi 3B+ 3B, 2, & Pi 1B+) Red (AW C4 Pi 3 Coupe Red)

Pibow Coupé. The slim, hackable, and attractive case for the Raspberry Pi!

Replacement layers included for the Pi 3B+

Note: We've redesigned Pibow to be compatible with both the Raspberry Pi 3, 2 and B+. Due to changes in the layout of the Raspberry Pi 3 older Pibows (one's with a 2/B+ label) will not work ideally with Raspberry Pi 3!

Features:

  • Compatible with Raspberry Pi 3, 2 and B+
  • extra venting, and a place for installing a heatsink if you really want to push your Pi
  • Super-slimline profile
  • Fully HAT compatible
  • Protects your beloved Pi!
  • Clear top and base leave Raspberry Pi visible
  • GPIO cut-out with laser-etched pin labels
  • Leaves all ports accessible
  • Made from lightweight high-quality cast acrylic
  • Great for hacking and tinkering!
  • Made in Sheffield, UK

Crafted out of five unique layers including a transparent top and base that leave your beautiful Pi visible inside. Each layer is laser-cut from colourful high-quality cast acrylic and once stacked they securely contain a Raspberry Pi 3, 2 or B+ while leaving the primary ports, including the camera port, display port, and GPIO accessible.

Weighing only 61 grams the case is lightweight and ideal for mounting to any surface. No tools are required for assembly or disassembly.

R114.64  Inc VAT
R150.31
Discontinued: Pibow 3 Coupé (Raspberry Pi 3B+ 3B, 2, & Pi 1B+) Flotilla (AW C4 Pi 3 Coupe Flotilla)

Pibow Coupé. The slim, hackable, and attractive case for the Raspberry Pi!

Replacement layers included for the Pi 3B+

Note: We've redesigned Pibow to be compatible with both the Raspberry Pi 3, 2 and B+. Due to changes in the layout of the Raspberry Pi 3 older Pibows (one's with a 2/B+ label) will not work ideally with Raspberry Pi 3!

Features:

  • Compatible with Raspberry Pi 3, 2 and B+
  • extra venting, and a place for installing a heatsink if you really want to push your Pi
  • Super-slimline profile
  • Fully HAT compatible
  • Protects your beloved Pi!
  • Clear top and base leave Raspberry Pi visible
  • GPIO cut-out with laser-etched pin labels
  • Leaves all ports accessible
  • Made from lightweight high-quality cast acrylic
  • Great for hacking and tinkering!
  • Made in Sheffield, UK

Crafted out of five unique layers including a transparent top and base that leave your beautiful Pi visible inside. Each layer is laser-cut from colourful high-quality cast acrylic and once stacked they securely contain a Raspberry Pi 3, 2 or B+ while leaving the primary ports, including the camera port, display port, and GPIO accessible.

Weighing only 61 grams the case is lightweight and ideal for mounting to any surface. No tools are required for assembly or disassembly.

R107.27  Inc VAT
R144.82
Discontinued: Quattro Case - Raspberry Pi VESA & HDD Case (Black) (AW C5 Quattro case black vesa)

The Quattro case is designed to house the Raspberry Pi B+/2/3 and a 2.5" hard drive! The case has a square form factor, pop-off top panel and includes 100mm square VESA mounting.

The Quattro Case Features:

  • Media server function with space for internal 2.5” HDD
  • Various mount options including VESA 100
  • Non-slip rubber feet
  • Removable top panel for access
  • LEDs guides for Power & Action on Pi B+ / Pi 2 / Pi 3 PCBs
  • Internal space for addition of Pi HAT PCBs
  • Internal space for hidden Pi camera (front facing)
  • Removable panel for SD card access
  • Lockable top cover with 4 security screws
  • Top cover with easy clip system for PCB access if required
  • Excellent ventilation with space for on-board heatsinks
  • Recessed pockets for access to all external connectors
The Quattro case is designed to house the Raspberry Pi B+/2/3 and a 2.5" hard drive! The case has a square form factor, pop-off top panel and includes 100mm square VESA mounting.
R152.15  Inc VAT
R199.90
Discontinued: Mini Retroflag NESPi NES Style Case For Raspberry Pi 3, 2, B+ (AW Nespi retro case)
Specifications:

This is a NES inspired enclosure for your Raspberry Pi system. It can turn your bare Raspberry Pi PCB into an elaborate gaming console.

NES Style:
We created this Pi case applying the most iconic element in the retro game world as a homage to the most classic console ever made.

POWER button, RESET button and LED all functional:
Front loading cartridge cover
Behind the small, hinged door, there are two USB ports and one standard RJ-45 connector.


Improved HDMI and Audio Ports
This is done to enhance the experience of using your HDMI and audio out-put cables.

Micro SD card slot on the Side
We put the slot for your Micro SD card on the side to allow more space for you to operate more freely.

Compatibility:
RASPBERRY PI 3 MODEL B, RASPBERRY PI 2 MODEL B, RASPBERRY PI 1 MODEL B+

Customization:
We tailor made this enclosure to fit your Raspberry Pi PCB perfectly so that you can use it like a NES console the way you remember it.

  You can view the manual at http://retroflag.com/download/NESPi_CASE_Manual.pdf

Package Includes:

1 x NESPi Case
4 x Adapter PCB(power,usb,lan)
1 x Screw driver
1 x Instruction manual

Grab yourself one or two retro controllers to complete the retro look and feel.
Add a fan and heat sinks to further cool down your Raspberry Pi



This is a NES inspired enclosure for your Raspberry Pi system. It can turn your bare Raspberry Pi PCB into an elaborate gaming console.
R429.90  Inc VAT
Discontinued: WS Budget Black case for Raspberry Pi (AW C7 Pi 3 Budget black case(J))

Please note: Raspberry Pi not included

Case J for RPi
specification:

R24.90  Inc VAT
R49.43
Discontinued: WS Budget Clear case for Raspberry Pi (AW C7 Pi 3 Budget clear case)

Please note: Raspberry Pi not included

Case G for RPi specification:

For use with:
R24.90  Inc VAT
R49.43
Clear Acrylic Case For Raspberry Pi Zero (3B2 Zero acrylic case 2 layer)
Features:

1. Easy to assemble
2. 2 layers, 4 bolts, spacers and nuts included
3. Will fit Raspberry Zero & Zero W

Notes:
Only includes the case. RPi Zero is not included.
Don't forget to remove the protective film from the acrylic.

Package Includes:

1x Clear Acrylic Case + heat sink
R49.90  Inc VAT
Per Page      81 - 100 of 119