Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
XTC-3D 680g protective coating for smoothing and finishing 3D printed parts (WH XTC 3D 680g)

Description

XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.

How To

Features

Inexpensive to Use – 1 oz covers 100+ square inches (see coverage information below).

90% Time & Labor Savings: XTC-3D® fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated.

Coat any 3D Print Surface - XTC-3D® can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.

XTC-3D® does not contain VOC’s, phthalates or phosphates.

Pack Size

680g

Need more info? You can watch MatterHackers video at https://www.youtube.com/watch?v=ChkHuFU90WE



R457.90  Inc VAT
Drillpro 3Pcs 1/4 Inch Hex Shank HSS Titanium Coated Step Drill Bit Set 3-12/4-12/4-20mm (3B4 Shank drill bit set)
Specifications:
Brand: Drillpro
Material: HSS / High Speed Steel
Surface Treatment: Titanium Coated
Shank Size: 1/4" Hex Shank
Includes a five-step bit, nine-step bit and ten-step bit.
Quantity: 3pcs
 
The 3 Cutters Come in the Following Sizes:
4-12mm: 4mm,6mm,8mm,10mm,12mm
4-20mm: 4mm,6mm,8mm,10mm,12mm,14mm,16mm,18mm,20mm
3-12mm: 3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm
 
Features:
This is the New HSS Steel Large Step Cone Drill Titanium Bit Set Hole Cutter, which is made from high quality HSS steel, Titanium coated to reduce friction and heat
It is very suitable to cut holes in a variety of materials including steel, brass, wood, plastic, etc
 
Package Includes:
1x Set (3pcs) HSS Step Drill Bit
R119.90  Inc VAT
XTC-3D 180g protective coating for smoothing and finishing 3D printed parts (WH XTC 3D 180g)

Description

XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.

How To

Features

Inexpensive to Use – 1 oz covers 100+ square inches (see coverage information below).

90% Time & Labor Savings: XTC-3D® fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated.

Coat any 3D Print Surface - XTC-3D® can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.

XTC-3D® does not contain VOC’s, phthalates or phosphates.

Pack Size

180g

Need more info? You can watch MatterHackers video at https://www.youtube.com/watch?v=ChkHuFU90WE


R199.90  Inc VAT
Drillpro DB-M1 10pcs 0.8-3mm Titanium Coated Engraving Milling Cutter Carbide Bits (1C3 10 0.8-3mm routor bit case set)
Specifications:
Brand: Drillpro
Model: DB-M1
Material: Carbide (tungsten steel)
Surface Treatment: Titanium Coated
Shank Diameter: 3.175mm
Cutting Edge Diameter: 0.8-3mm ( 0.8,1.0,1.2,1.4,1.6,1.8,2.0,2.2,2.4,3.0mm)
Cutting Edge Length: 12mm
Overall Length: 37mm
Quantity: 1set (10pcs)
 
Features:
1. use of ultra-fine grain carbide material with good milling, cutting performance, ensure high work efficiency;
2. have sufficient bending strength and wear resistance; High hardness, high wear resistance, high strength;
3. sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches.
 
Application:
PCB,SMT, CNC, Mould, pastic fiber, carbon fiber, super hard wood, printed circuit board, other precision parts processing.
 
Package Includes:
10 x bits
R129.90  Inc VAT
Per Page      1 - 4 of 4
  • 1