Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
Mega2560 + WiFi R3 ATmega2560+ESP8266 32Mb memory USB-TTL CH340G. Compatible for Arduino Mega NodeMCU For WeMos ESP8266 (Mega2560 + wifi)

Features:

Full integration on one board: Mega R3 ATmega2560 and WiFi ESP8266 with memory 32Mb (megabyte)
All of the modules can work together or each separately. And everyone has their own pinout headers
The convenient solution for the development of new projects requiring Uno and WiFi
Via USB you can update sketches and firmvare for ATmega2560 and for ESP8266. For this on board have the USB-serial converter CH340G
Use this board is very simple
The board has DIP-switch, to connect the modules
For example, to: USB and ATmeg2560, USB and ESP8266, ATmega2560 and ESP8266
 
Table DIP- Switch:
 
Connection                                                                                       DIP
ATmega2560<->ESP8266 
1            2           3             4           5             6              7
ON         ON        OFF       OFF          OFF        OFF          OFF
USB <->ATmega2560                               
OFF        OFF       ON        ON         OFF        OFF          OFF
USB<->ESP8266 (Update firmware or sketch)
OFF        OFF       OFF       OFF        ON         ON           ON
USB<->ESP8266 (communication)           
OFF        OFF       OFF       OFF        ON         ON           OFF
All independent                                       
OFF        OFF       OFF       OFF        OFF        OFF          OFF
 
Special solution:
USB <->ATmega328<-> ESP8266
                                                                                       DIP                                        SWITH 2
Connection                                        1       2       3      4      5         6           7
 
USB <-> ATmega2560<-> ESP8266    ON    ON    ON      ON   OFF    OFF      OFF          To RXD3/TXD3
 
 
USB converter CH340G connect to RX0/TX0 of ATmega2560
ESP8266 connect to RX3/TX3 of ATmega2560

Documents

Dimensional drawing

Dimensions MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USBDimensions MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USB

Pinout

Pinout MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USBPinout MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USB

Schematic

Schematic of MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USB

Drivers

Windows driver for MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USBLinux driver for MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USBMac OS driver for MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USBAndroid driver for MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USB

 
Package Contents:
1 x Mega + WiFi Board
R329.90  Inc VAT
ESP8266 ESP-12F Remote Serial Port WIFI Transceiver Wireless Module (ESP-12F Wireless Module)
Description: 
 
ESP-12F: breakthrough design. The new four-layer board design, the new revision antenna RF performance optimization, compared to the communication from the ESP-12E increased by 30% to 50%! Semi-hole chip technology, the whole IO leads, with metal shielding shell, has passed FCC & CE & RoHS certification, built-board PCB antenna, 4M bytes Flash.
 
Compatible with Adapter plate - not included

Note:
 
We can not offer any support at this stage on this item, sorry for the inconvenience.
 
Package includes:
 
1 x ESP8266 ESP-12F Remote Serial Port WIFI Transceiver Wireless Module

Resources:

Wikipedia
espressif resources
R59.90  Inc VAT
NodeMCU-32S ESP32 WiFi+Bluetooth Development Board (ESP32)

Overview

This is the NodeMCU development board based on ESP32, features WiFi+Bluetooth connectivity, onboard CP2102 and keys. What's more, all the I/O pins of ESP-WROOM-32 module are accessible via the extension headers.

Thanks to the rich open-source resources, it supports development in various ways such as Lua/AT commands/MicroPython/Arduino/IOT source code, etc. helps you to fast prototype IoT applications.

Features

  • Onboard ESP-WROOM-32 module
  • Onboard CP2102, USB to UART converter
  • USB port for power input, firmware programming, or UART debugging
  • 2x19pin extension headers, breakout all the I/O pins of the module
  • 2x keys, used as reset or user-defined

Specifications

  • WIFI module: ESP-WROOM-32
    • Processor: ESP32-D0WDQ6
  • Built-in Flash: 32Mbit
  • Antenna: Onboard PCB antenna
  • Peripheral interface: UART/GPIO/ADC/DAC/SDIO/PWM/I2C/I2S
  • WiFi protocol: IEEE 802.11 b/g/n
  • Bluetooth: Bluetooth 4.2
  • Frequency range: 2.4G ~ 2.5G (2400M ~ 2483.5M)
  • WIFI mode: Station / SoftAP / SoftAP+Station
  • Power supply: 5V
  • Logic level: 3.3V
  • Dimensions: 48.26mm x 25.4mm

Applications

The NodeMCU-32S suit for IOT applications such as:

  • Smart home
  • Intelligent building
  • Industrial automation
  • Wearable devices
  • IP camera
  • Intelligent agriculture

Pinouts

R199.90  Inc VAT
Wemos® Lolin ESP32 + WiFi + Bluetooth Dual ESP-32 ESP-32S ESP8266 OLED Module (ESP32 with OLED display)
Description:
 
ESP32 is already integrated with antenna and RF, power amplifier, low noise amplifiers, filters and the power management module.
An entire solution on the least amount of PCB area. This board is a 2.4 GHz dual mode WiFi and bluetooth chip by tsmc 40nm low power technology, power and optimized RF characteristics for a wide range of applications.
 
Features:
 
High performance
Small volume, easily embeded to other products
Strong function, with the support of lwIP protocol, freertos
Support three modes: AP, STA and AP+STA
Support for lua program, easy to develop

Package includes:

1 x Wemos® Lolin ESP32 OLED Module

R299.90  Inc VAT
Serial Port WIFI ESP8266 Module Adapter Plate With IO Lead Out For ESP-07 ESP-08 ESP-12 (ESP breakout board)
This Adapter Plate is for ESP07 ESP08 ESP12, a test board with IO lead out.

Please Note:


You will need to solder 3V regulator by yourself.
  ESP07, ESP08, ESP12 module boards are not included.

Package includes:

1 x Serial Port WIFI ESP8266 Module Adapter Plate
2 x Pin headers
R24.90  Inc VAT
Wemos® Higrow ESP32 WiFi + bluetooth Battery + DHT11 Soil Temperature And Humidity Sensor Module (Wemos Higrow)
Description:
 
More details available at:https://github.com/LilyGO/higrowopen


A LG 3000mAH 18650 battery could make ESP32 run 17 hours or more.
This capacitive soil moisture sensor differs from most of the resistive sensors on the market, using capacitive sensing principle to detect soil moisture. It avoids the problem that the resistance sensor is easy to corrode and greatly prolongs its working life.
Size: 193.5mm x 29.4mm
 
Package includes:
 
1 x Wemos® Higrow ESP32 WiFi + bluetooth Battery + DHT11 Soil Temperature And Humidity Sensor Module
R329.90  Inc VAT
ESP32-WROVER 4MB Module with Bluetooth and WiFi (ESP32-WROVER)
 Description:

ESP32-WROVER is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding. At the core of this module is the ESP32-D0WDQ6 chip*, same as ESP-WROOM-32 module. Compared to ESPWROOM-32, ESP32-WROVER has an additional SPI Pseudo static RAM (PSRAM) of 32 Mbits. As such, ESP32- WROVER features both 4 MB external SPI flash and 4 MB external PSRAM. The ESP32-WROVER module has a PCB antenna, while the ESP32-WROVER-I uses an IPEX antenna. The information in this datasheet is applicable to both of the two modules. The chip embedded is designed to be scalable and adaptive. There are two CPU cores that can be individually controlled, and the clock frequency is adjustable from 80 MHz to 240 MHz. The user may also power off the CPU and make use of the low-power coprocessor to constantly monitor the peripherals for changes or crossing of thresholds. ESP32 integrates a rich set of peripherals, ranging from capacitive touch sensors, Hall sensors, low-noise sense amplifiers, SD card interface, Ethernet, high-speed SPI, UART, I2S and I2C.

The integration of Bluetooth, Bluetooth LE and Wi-Fi ensures that a wide range of applications can be targeted, and that the module is future proof: using Wi-Fi allows a large physical range and direct connection to the internet through a Wi-Fi router, while using Bluetooth allows the user to conveniently connect to the phone or broadcast low energy beacons for its detection. The sleep current of the ESP32 chip is less than 5 µA, making it suitable for battery powered and wearable electronics applications. ESP32 supports a data rate of up to 150 Mbps, and 22 dBm output power at the antenna to ensure the widest physical range. As such the chip does offer industry-leading specifications and the best performance for electronic integration, range, power consumption, and connectivity. The operating system chosen for ESP32 is freeRTOS with LwIP; TLS 1.2 with hardware acceleration is built in as well. Secure (encrypted) over the air (OTA) upgrade is also supported, so that developers can continually upgrade their products even after their release.

Package includes:

1 x ESP32-WROVER 4MB Module









R129.90  Inc VAT
NodeMCU ESP8266 WiFi Development Board (NodeMcu Lua WIFI board)

Overview

This is the NodeMCU development board based on ESP8266, features WiFi connectivity, onboard CP2102 and keys. What's more, all the pins of ESP-12E module are accessible via the extension headers.

Thanks to the rich open-source resources, it supports development in various ways such as Lua/AT commands/MicroPython/Arduino/IOT source code, etc. helps you to fast prototype IoT applications.

Features

  • Onboard ESP-12E module
  • Onboard CP2102, USB to UART converter
  • USB port for power input, firmware programming, or UART debugging
  • 2x15pin extension headers, breakout all the pins of ESP-12E module
  • 2x keys, used as reset or user-defined

Specifications

  • WIFI module: ESP-12E
    • Processor: ESP8266
  • Built-in Flash: 32Mbit
  • Antenna: Onboard PCB antenna
  • Peripheral interface: UART/SPI/I2C/SDIO/GPIO/ADC/PWM
  • WiFi protocol: IEEE 802.11 b/g/n
  • Frequency range: 2.4G ~ 2.5G (2400M ~ 2483.5M)
  • WIFI mode: Station / SoftAP / SoftAP+Station
  • Power supply: 5V
  • Logic level: 3.3V
  • Dimensions: 48.26mm x 25.4mm

Applications

The NodeMCU suit for IOT applications such as:

  • Smart home
  • Intelligent building
  • Industrial automation
  • Wearable devices
  • IP camera
  • Intelligent agriculture

Pinouts

Development Resources

Wiki : www.waveshare.com/wiki/NodeMCU

R129.90  Inc VAT
ReSpeaker 2-Mics Pi pHAT (respeaker 2 microphones)

ReSpeaker 2-Mics Pi HAT is a dual-microphone expansion board for Raspberry Pi designed for AI and voice applications! This means that you can build a more powerful and flexible voice product that integrates Amazon Alexa Voice Service, Google Assistant, and so on with your Raspberry Pi B+/2/3/Zero/ZeroW!

The ReSpeaker is based on the Cirrus Logic WM8960, a low power stereo codec and features 2 microphones on both sides of the board for collecting sounds. It also provides 3 x APA102 RGB LEDs, 1 x User Button and 2 x on-board Grove interfaces for expanding your applications. What is more, 3.5mm Audio Jack or JST 2.0 Speaker Out are both available for audio output.

Note: This product does not include the Pi Zero board!

Features

  • Raspberry Pi compatible (Supports Raspberry Pi Zero/Zerow/B+/2/3)
  • pHAT Size
  • Dual-Microphones
  • 2 Grove Interfaces: Supports GPIO and I2C
  • Programmable Button and LED: 1 x button and 3 x LEDs
  • Cirrus Logic WM8960 Audio Codec
  • Two types audio output socket : 3.5mm Audio Jack, JST2.0 Speaker Out
  • Far field support (up to 3 meters)

Usage

1.Get started with Google Assistant

2.How to use button to trigger Google Assistant

Documentation

Please visit Seed Studio's wiki page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to Seed Studio's forum.

R249.90  Inc VAT
ReSpeaker 4-Mic Array HAT (respeaker 4 microphones)

ReSpeaker 4-Mic Array for Raspberry Pi is a quad-microphone expansion board for Raspberry Pi designed for AI and voice applications. This means that you can build a more powerful and flexible voice product that integrates Amazon Alexa Voice Service, Google Assistant, and so on.

Different from ReSpeaker 2-Mics Pi HAT, this board is developed based on AC108, a highly integrated quad-channel ADC with I2S/TDM output transition for high definition voice capture. Besides, this 4-Mics version provides a super cool LED ring, which contains 12 APA102 programmable LEDs. With that 4 microphones and the LED ring, Raspberry Pi would have ability to do VAD (Voice Activity Detection), estimate DOA (Direction of Arrival) and show the direction via LED ring, just like Amazon Echo or Google Home.

Please note that the package does not contain Raspberry Pi.

Please note that there are no any audio output interfaces on ReSpeaker 4-Mic Array for Raspberry Pi. It is only for voice capture. And you could use the headphone jack on Raspberry Pi for audio output.

Here is a video from Parvinder Yadav, it teaches how to use ReSpeaker 4-Mic Array for Raspberry Pi  to make google assistant. We really appreciate Parvinder's contribution to the community and hope this video can be a good help for you.

https://youtu.be/uAQf0RKBNHo

Technical Details

  • Dimensions 65mm x 65mm x 9mm
  • Weight G.W 20g    
  • Battery Exclude
  • MIC 4 analog microphones
  • LED 12 APA102 programable RGB LEDs, connected to SPI interface
  • Raspberry Pi 40-Pin Headers support Raspberry Pi Zero, Raspberry Pi 1 B+, Raspberry Pi 2 B and Raspberry Pi 3 B
  • AC108 highly integrated quad-channel ADC with I2S/TDM output transition
  • Software Algorithm VAD(Voice Activity Detection), DOA(Direction of Arrival) and KWS(Keyword Search)
  • Grove 2 Grove Interfaces
  • Voice Capture Distance 3 meters radius voice capture

Documents

ReSpeaker 4-Mic Array for Raspberry Pi is a quad-microphone expansion board for Raspberry Pi designed for AI and voice applications. This means that you can build a more powerful and flexible voice product that integrates Amazon Alexa Voice Service, Google Assistant, and so on.
R419.90  Inc VAT
WeMos® D1 R2 V2.1.0 WiFi Uno Module Based ESP8266 Arduino Nodemcu Compatible (Wemos V2 ESP Uno board)
Description:

11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)
1 analog input(3.3V max input)
Micro USB connection
9-24V power input jack.
Compatible with Arduino
Compatible with nodemcu

For more info go to http://www.wemos.cc/
Getting started with Arduino products

Package includes:

1 x WeMos D1 WiFi UNO ESP-12E Based ESP8266 Arduino Compatible
Arduino compatible
R129.90  Inc VAT
ESP32-CAM WiFi Module ESP32 serial Development Board 5V Bluetooth with OV2640 Camera Module (ESP32 CAM)
Product Features

Low-power dual-core 32-bit CPU for application processors
Main frequency up to 240MHz, computing power up to 600 DMIPS
Built-in 520 KB SRAM, external 4M PSRAM
Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
Support OV2640 and OV7670 cameras, built-in flash
Support image WiFi upload
Support TF card
Support multiple sleep modes
Embedded Lwip and FreeRTOS
Support STA/AP/STA+AP working mode
Support Smart Config/AirKiss one-click distribution network
Support secondary development
R199.90  Inc VAT
Per Page      1 - 12 of 12
  • 1