Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT.
R139.90  Inc VAT
R34.90  Inc VAT
pin:bit breaks out all of the useful pins from your micro:bit into breadboard format while providing handy-dandy labels to make your builds go smoothly.
R129.90  Inc VAT
This pre-built Edge Connector Breakout Board for the micro:bit gives access to all the important pins on the bottom edge of the micro:bit.
R112.90  Inc VAT
Dedicated 40-Pin Rainbow Female to Female ribbon Cable for Raspberry Pi (20cm) (40 pin ribbon F2F)

Description:

Raspberry pi 40 pin Female to female flat ribbon cable specifically designed to fit directly onto the GPIO Headers pins of the Raspberry Pi.

Specifications:

  • 40 pin
  • Female to female
  • GPIO Header connector
  • 20cm long

Contents:

1 x Female to Female ribbon Cable
R54.90  Inc VAT
GPIO Reference Board (Model B+,A+,2B and 3B) (gpio ref 40pin board)

RASPBERRY PI NOT INCLUDED(Neither the key-ring and keys for those who wondered)

This cute little GPIO reference board from allows you to quickly and easily distinguish between the different pins of the Raspberry Pi Model B+, Raspberry Pi 2B, Pi 3B and Pi 3B+. It's even got a key chain hole, so you can carry it around and keep it handy - you'll never know when you need to hack a Pi!

The GPIO reference board features BCM numbering on one side and the pin names on the other. It can be soldered for permanent referencing, or slipped on and off when required.

Dimensions:
 
Width = 67mm
Height = 19mm
Thickness = 0.8mm

On the RPi3 and later you'll have to snip off a little bit of the corner closest to pin 39 thanks to the new POE pins on the board
R32.90  Inc VAT
GPIO Breadboard Breakout Kit (GPIO breakout kit)
We created this bundled breakout kit for easy connection from your Raspberry Pi GPIO to the breadboard.
The bundle is discounted to save you some hard earned cash rather than paying full price for loose components.

Package includes:

1 x BreadBoard 400 tie points
1 x 40-Pin Gray Ribbon Cable (29cm)
1 x GPIO T Board for easy breadboard connection
R99.90  Inc VAT
GPIO Hammer Header Jig Kit(Solderless) (hammer header jig kit)

Raspberry Pi Zero not included!

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT.

Male + Female + Installation Jig

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers might be just the job. They come in male and female flavours, and use crafty little retaining nubbins to grip tightly into the holes on the PCB.

The installation jig kit contains two acrylic base pieces, onto which your Pi Zero or pHAT sits, two nylon bolts, an acrylic top piece onto which you hammer, and both a male and female header. Make sure you carefully read our guide for fitting hammer headers.

We strongly recommend using our installation jig! If you want to try without it then godspeed to you but it is a delicate and tricky process! The female headers are simpler to insert than the male headers as you can hammer straight onto the plastic of the header, but the male ones are particularly tricky without the jig.

Please note: we can't be held responsible for any damage that you may cause to your Pi Zero, pHAT, fingers, or headers while fitting them. If you follow our guide carefully then you should be fine. If this worries you, then get yourself a soldering iron instead!

Loose Male hammer headers are also available.

Tutorial on using the jig

Watch our demo of how to fit the hammer headers on Bilge Tank, below.

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT.
R139.90  Inc VAT
T Style 40-Pin GPiO Breakout Board for Raspberry Pi (T Board blue)

Description:

Pic is for illustration purposes only.

Colour might differ between blue and red as per manufacturer stock availability.

This T shaped breakout board makes it easier to use the GPIO pins as it is bigger in size and labeled.

The board also tightly fits on to a breadboard making electronic experiments much easier.

Specifications:

  • 40 Pins means it's ready for use on the Pi3B,Pi2B and B+

Contents:

  • 1 x T Style 40-Pin GPiO Breakout Board

Resources:


R74.90  Inc VAT
GPIO Hammer Header Male (Hammer Header Male only)

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! your header is securely attached to your Pi Zero or pHAT.

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers might be just the job. They come in male and female flavours, and use crafty little retaining nubbins to grip tightly into the holes on the PCB.

The installation jig kit contains two acrylic base pieces, onto which your Pi Zero or pHAT sits, two steel bolts, an acrylic top piece onto which you hammer, and both a male and female header. Make sure you carefully read our guide for fitting hammer headers.

We strongly recommend using our installation jig! If you want to try without it then godspeed to you but it is a delicate and tricky process! The female headers are simpler to insert than the male headers as you can hammer straight onto the plastic of the header, but the male ones are particularly tricky without the jig.

Please note: we can't be held responsible for any damage that you may cause to your Pi Zero, pHAT, fingers, or headers while fitting them. If you follow our guide carefully then you should be fine. If this worries you, then get yourself a soldering iron instead!

R34.90  Inc VAT
Colour-coded GPIO Header for Pi Zero (Colour coded header 40 pin)

Colour-coded GPIO pins that make locating that ground or power connection you need super simple!

These 40-pin 2x20 male headers from our friends at The Pi Hut can be used on a Raspberry Pi Zero and are colour-coded for your prototyping convenience.

You'll never have to search for a ground pin again!

The colour coding is nice and simple:

  • Red = 5V
  • Yellow = 3V3
  • Black = GND
  • Blue = DNC (Reversed I2C)

For hard-mode try installing the header the wrong way round and throwing away your normal pin reference! ;-)

R34.90  Inc VAT
pin:bit for micro:bit (pin:bit )

pin:bit breaks out all of the useful pins from your micro:bit into breadboard format while providing handy-dandy labels to make your builds go smoothly.

It's ideal for building small circuits on a breadboard, and for exploring what different types of components like LEDs, buttons, and analog sensors do and how they work.

Just slot in your micro:bit and then hook up to its pins with a breadboard or by connecting jumpers directly. We've broken out every spare pin on the micro:bit that isn't shared with the LED matrix, so your projects won't interfere with the built-in functionality.

Features

  • Comes fully-assembled and ready to use
  • Pins exposed:
    • 3V and GND
    • Analog channels 0, 1, and 2 (these are the large pads on your micro:bit)
    • I2C bus interface
    • SPI bus interface
    • GPIO pins 0, 1, 2, 5, 8, 11, 13, 14, 15, 16, 19, and 20
  • Plugs straight into your breadboard (not included)
  • Compatible with micro:bit (not included)
  • No soldering required!
pin:bit breaks out all of the useful pins from your micro:bit into breadboard format while providing handy-dandy labels to make your builds go smoothly.
R129.90  Inc VAT
GPIO Expansion Board for Raspberry Pi 2/3 (Blue/yellow GPIO expansion board)
Features:
 
Universal GPIO expansion board,compatible with raspberry Pi 3, Pi 2 & Pi 1 Model B+
Make your project easier to build and less messy.

This board simply clones the GPIO into 3 ports. It does not create extra GPIO pins.

Note: Raspberry Pi is not included
 
Package Includes:
 
1 X Raspberry Pi GPIO Expansion Board
4 X Screws
4 X Nuts
4 X Nylon fixed standoffs
R109.90  Inc VAT
Infinity Cascade GPIO Expansion Board 32 IO Extend Adapter Module For Raspberry Pi (Infinity Cascade board)
Description:

This module is designed specifically for the Raspberry Pi IO expansion Modules, which can effectively solve the issue of Raspberry send IO port. Module uses four 74HC595 chips to expand 32 IO ports, the top of the module will expand the IO of Raspberry Pi again that can be cascaded for more IO expansion modules with theoretically unlimited expansion.

Features:
 
--Expanded 32 GPIO
--Infinity expansion by adding more modules
--Use wiring PI API,sample code
 
Port:
--Raspberry Pi 2*13port
--Raspberry Pi 2*13 cascade port
--Q0-Q31 expanded IO port
 
Product Parameters:

--Working voltage:2.4v-5v
--IO voltage:3.3v
--Expanded 32 unidirectional IO
--Connection through SPI
--100 MHz (typical) shift out frequency
--8-bit serial input
--8-bit serial or parallel output
--Specified from -40C to +85C and from -40C to +125C

Typical Application:
 
--Drive a lattice screen
--Driver numeric display
--Drive matrix LED


How to Use:

Insert the module that the silk screen says 'RPI IN'. Pay attention don’t make the direction reversed! The correct direction of insert module is above the Raspberry Pi’s PCB; The 8*4header in the module are Q0-Q31 expanded GPIO, they can connect to the peripheral through the Dupont Line. The header which near silk screen write 'EXT' expand GPIO of Raspberry Pi, user can cascade the other module or the same module.

Package Includes:


1x Raspberry pi IO expansion board
R149.90  Inc VAT
Raspberry Pi 3 Model B+ GPIO-232 Expansion Board LED Nixie Tube 485 232 UART Keys Multifunction GPIO Extension Board (GPIO training board)

Description:


1. RS485 module
2. RS232 module(green DB9)
3. EEPROM (24 c16)
4. Three LEDs
5. Three buttons
6. A buzzer
7. 4 in 1 digital tube
8. The rest of the IO mouth raises
9. TF card module (SPI)

 

 

Package Includes:

1 X GPIO Expansion Board

R379.90  Inc VAT
Raspberry Pi Zero W Case Red ABS with GPIO Reference (Red Zero ABS case)
Introduction :

This case is suitable for the Raspberry Pi ZERO range. There is GPIO references on the cover making it a very useful case . This case is available in red, blue, transparent and black.

Features:

1. GPIO reference on the the top of case - you needn't search for the references online.
2. Hole on the buttom of case -   you can mount the case on the wall
3. Translucent color design - make the case more beautiful and you can see the pi in the case
4. Use for Raspberry Pi ZERO range

Specifications :

1. Material : ABS
2. Weight : 17 g approx
3. Size ( L x W x H) : 72mm x 34mm x 17mm approx

Package Includes :

1 x Raspberry Pi Zero Case
R59.90  Inc VAT
Raspberry Pi Zero W Case Black ABS with GPIO Reference (Black Zero ABS case)
Introduction :

This case is suitable for the Raspberry Pi ZERO range. There is GPIO references on the cover making it a very useful case . This case is available in red, blue, transparent and black.

Features:

1. GPIO reference on the the top of case - you needn't search for the references online.
2. Hole on the buttom of case -   you can mount the case on the wall
3. Translucent color design - make the case more beautiful and you can see the pi in the case
4. Use for Raspberry Pi ZERO range

Specifications :

1. Material : ABS
2. Weight : 17 g approx
3. Size ( L x W x H) : 72mm x 34mm x 17mm approx

Package Includes :

1 x Raspberry Pi Zero Case
R59.90  Inc VAT
Raspberry Pi Zero W Case Blue ABS with GPIO Reference (Blue Zero ABS case)
Introduction :

This case is suitable for the Raspberry Pi ZERO range. There is GPIO references on the cover making it a very useful case . This case is available in red, blue, transparent and black.

Features:

1. GPIO reference on the the top of case - you needn't search for the references online.
2. Hole on the buttom of case -   you can mount the case on the wall
3. Translucent color design - make the case more beautiful and you can see the pi in the case
4. Use for Raspberry Pi ZERO range

Specifications :

1. Material : ABS
2. Weight : 17 g approx
3. Size ( L x W x H) : 72mm x 34mm x 17mm approx

Package Includes :

1 x Raspberry Pi Zero Case
R59.90  Inc VAT
Raspberry Pi 400 GPIO Header Expansion Adapter 2x 40PIN (pi400 GPIO board)
*images are for reference only, RPi400 and expansion boards are NOT included.


Colour-coded header, easy expansion



Outline Dimensions


R79.90  Inc VAT
Dual GPIO Expander for Raspberry Pi Pico, Two Sets of Male Headers (ws pico expander dual)
Two sets of standard Raspberry Pi Pico GPIO male headers

Features at a glance
  • Standard Raspberry Pi Pico female header for direct attaching Raspberry Pi Pico (if male header soldered), or just through jumper wires
  • Two sets of 2x20 male header, allows connecting more Raspberry Pi Pico expansion modules
  • Clear pinout labels on the front side, easy to use
  • Immersion gold process, beautiful & practical, stunning aesthetic looking
Raspberry Pi Pico header compatibility

Center female pin header for direct attaching the Raspberry Pi Pico



Two sets of 2x20 male header

Allows connecting more Raspberry Pi Pico expansion modules


Please make sure there are no pin conflicts between the modules you want to use together before connecting.

Raspberry Pi Pico and expansion modules are NOT included.

Immersion gold process

Black base panel, white pinout labels, golden rounded outline, stunning aesthetic



Outline dimensions

R109.90  Inc VAT
Quad GPIO Expander for Raspberry Pi Pico, Four Sets of Male Headers, USB Power Connector (ws pico expander quad)
Four sets of standard Raspberry Pi Pico GPIO male headers, USB-powered support

Features at a glance
  • Standard Raspberry Pi Pico female header for direct attaching Raspberry Pi Pico (if male header soldered), or just through jumper wires
  • Four sets of 2x20 male header, allows connecting more Raspberry Pi Pico expansion modules
  • USB power input connector, ensures sufficient power supply for multiple expansion modules
  • Clear pinout labels on the front side, easy to use
  • Immersion gold process, beautiful & practical, stunning aesthetic looking
Raspberry Pi Pico header compatibility

Center female pin header for direct attaching the Raspberry Pi Pico



Four sets of 2x20 male header

Allows connecting more Raspberry Pi Pico expansion modules
Extra USB connector for external power supply



Please make sure there are no pin conflicts between the modules you want to use together before connecting.

Raspberry Pi Pico and expansion modules are NOT included.

Immersion gold process

Black base panel, white pinout labels, golden rounded outline, stunning aesthetic



Outline dimensions

R159.90  Inc VAT
40 Pin GPIO Connector Extra tall Header Extender (extra tall header)
Stack multiple plates, breakouts etc onto your Raspberry Pi with this custom-made extra-tall and extra-long 2x20 female header.
 
Features:
  • 40 Pin Double Row (2x20) Socket Connector
  • Extension for the Raspberry Pi GPIO Connectors
  • Pitch 2.54mm
  • Fully Tested on the Raspberry Pi Model B
R34.90  Inc VAT
Kitronik Edge Connector Breakout Board for micro:bit (Edge connector micro:bit)

This pre-built Edge Connector Breakout Board for the micro:bit gives access to all the important pins on the bottom edge of the micro:bit.

Looking to do more with your micro:bit? Unlock its potential with this pre-built version of our Edge Connector Breakout Board! This breakout board has been designed to offer an easy way to connect additional circuits and hardware to the pins on the edge of the micro:bit. It provides access to all of the micro:bit processor pins allowing a lot of extra functionality to be added. The datasheet (below) includes a helpful diagram explaining the function of every pin on the micro:bit.

This Edge Connector Breakout Board for the micro:bit gives access to all of the important pins on the bottom edge of the micro:bit. 21 pins are broken out in total; providing additional I/O lines, direct access to buttons A and B, the LED matrix outputs and the I2C bus. Please refer to the datasheet below for more details.

The micro:bit pins are broken out to a row of pin headers. These provide an easy way of connecting circuits using jumper wires. The SCL and SDA pins are separated at the edge of the board (solder pads) providing easy identification. The PCB includes a prototyping area with 3V, 0V and unconnected rows that can be soldered to. This allows the easy connection of switches, sensors and any pull-up or pull-down resistors etc. as required.

To use the breakout board the micro:bit should be inserted firmly into the connector as shown below:

Note:

  • This product is supplied with straight double row PCB pin headers already soldered to the breakout board

Features:

  • Features a dedicated pin strip for quick and easy prototyping
  • Breaks out 21 pins from the edge of the micro:bit
  • Dedicated prototyping area with 3V and 0V rows
  • Labelled pins and clear, straightforward documentation

Contents:

  • 1 x Edge Connector Breakout Board for the micro:bit, pre-built

Dimensions:

  • Length: 60mm
  • Width: 40mm
  • Height: 11.8mm

Video available at https://youtu.be/bzm4zepbGAc

Requires:

Resources:

This pre-built Edge Connector Breakout Board for the micro:bit gives access to all the important pins on the bottom edge of the micro:bit.
R112.90  Inc VAT
The MagPi Simple Electronics with GPIO Zero (book simple electronics)

Create stunning electronics projects with your Raspberry Pi using our 100 page GPIO Zero Essentials guide.

Using the GPIO pins on your Raspberry Pi opens up a whole new world of possibilities. While it might seem daunting at first glance, with our help you’ll be creating electronic circuits and controlling them with the Python programming language within minutes. Grab your breadboard and start taking control of the real world with your Raspberry Pi today!

Learn from simple electronics projects across 12 chapters:

  • Program LED lights
  • Add a push button to your project
  • Build a motion sensing alarm
  • Create your own distance rangefinder
  • Make a laser-powered tripwire
  • Build a Raspberry Pi robot
  • and much more
R109.90  Inc VAT
Per Page      1 - 20 of 21