Search

If you're using this tripod stand with a camera, its versatility also allows you to get shots from various angles. The stand comes with adjustable socket joints and flexible feet. You can bend the feet at your will for perfect photos!

This octopus tripod stand is compatible with the Raspberry Pi HQ camera module.(Cam included)

Features:

• A unique all-in-one bracket shell.
• Supports the Raspberry Pi official HQ cameras.(INCLUDED)
• Compatible with Raspberry boards:(BOARD NOT INCLUDED)
  
  • Raspberry Pi 4 Model B 2GB
  • Raspberry Pi 4 Model B 4GB
  • Raspberry Pi 4 Model B 8GB
  • Raspberry Pi 3 Model B
  • Raspberry Pi 3 Model B
• Suitable holes for cooling fans, cameras, display screens, and 40Pin pin headers.

• Raspberry Pi 4 (preferred) with power supply and cables or a Raspberry Pi kit
• uSD card
• Lens of your choice(Find lenses here)

• Calibration programmable registers can directly read its unit of measure is the ampere current, and power in watts per read.
• For as many as 128 sampling averaging, in order to realize filter in noise environment.
• The I2C interface has a timeout, not only can avoid the bus lock, but also can provide high-speed mode, meet the communication requirements of up to 3.4 MHz.
• All features are support software programmable INA219.
• Using single power supply, the working voltage between 3.0 to 5.5 V. 

• 480x320 hardware resolution
• Resistive touch control
• Supports any revision of Raspberry Pi (directly-pluggable)
• 125MHz High-Speed SPI signal transmission, clear & stable display effect
• Drivers provided (works with your own Raspbian/Ubuntu/Kali/Retropie)
• Supports FBCP software driver as well, allows to config software resolution and set up dual-display
• Size perfectly fits the Pi (Raspberry Pi B /2B/3B/3B )
• High quality immersion gold surface plating
• Combined with the Raspberry Pi (refresh rate up to 50Hz), allows you to:
  • Watch videos (multi formats like MP4)
  • Play video games (RetroPie, take a bite)
  • Take photos by touching (up to 17 camera modes)
  • Use software keyboard (system interaction without keyboard/mouse)

External Dimensions

Wiki : www.waveshare.com/wiki/3.5inch_RPi_LCD_(C)

Note: The Raspberry Pi, High Quality Camera and flexible tripod not included)

Note: The Raspberry Pi, High Quality Camera and flexible tripod not included)

25mm C-mount Telephoto lens for Raspberry Pi High Quality Camera

25mm focal length high definition telephoto lens, capturing every tiny details

Brings the beautiful world into your vision

Fitting the lens to Raspberry Pi High Quality Camera




Working with Raspberry Pi

35mm C-mount Telephoto lens for Raspberry Pi High Quality Camera

35mm focal length high definition telephoto lens, capturing every tiny details

Brings the beautiful world into your vision

Fitting the lens to Raspberry Pi High Quality Camera




Working with Raspberry Pi

The HighPi case sets the standard for ease of use and versatility in Raspberry Pi cases. Installing or removing the Raspberry Pi PI3B board is astonishingly quick, simple, and secure; all without tools or assembly. One snap action locks the Pi board into the case; the second secures the lid, rattle free. Remove the Pi board and the lid with one-finger-releases for each. Genius! Customers assembling large volumes of Pi boards in cases love how much time and effort this case saves them.

The HighPi case can be wall mounted horizontally with two screws for easy removal, or mounted in any orientation including upside-down with four screws from inside the case. When wall mounted horizontally, the A/V and audio cables hang downward from the Pi, improving visual tidiness and reducing the need for support of heavy cables.

Whether you’re running a plain Pi4 board or modding it to the max, the HighPi case has your Pi covered. The generous internal room allows HATs, break-out boards, or heat sinks. Vents on three sides double as fly-through cable ports for the GPIO and whatever else you need to connect to. A two-section break-out allows you to choose how much of the A/V side of the case to open up for connectors on attached boards. Here are just a few examples of the HATs that fit perfectly in the HighPi.

	RASPBERRY PI POE HAT The HighPi case holds the PoE HAT perfectly, fully securing both the Pi and HAT boards. Many competing cases cannot secure the Pi board to the case once a HAT is added to it. The side and bottom ventilation slots allow the fan to move air in and out of the case.
	HIFIBERRY HATS This case perfectly accommodates the full line of HiFiBerry audio boards. Use one break-out section for DAC and Digi , and both for the Amp or DAC DSP. There is generous clearance around the RCA connectors for bulky, high-end cables.
	SERIAL HAT Do you need to ensure power to your Pi or communicate via serial? Our serial HAT can be enclosed tidily along with the Pi board.
	UPS HAT The UPS HAT and Pi board are both enclosed easily in the HighPi case, with significant space for larger batteries. The GPIO connector pins remain accessible, and a GPIO ribbon cable can be run out of the case while fully assembled.

• High quality ABS plastic case, designed and made in Canada
• Industry-leading ease of use, rapid tool-free assembly and disassembly
• Large internal volume for HATs, break-out boards, or heat sinks
• Vents on three sides double as fly-through cable ports
• Two-section breakout on A/V side for HAT board I/O
• Large vent opposite A/V side allows GPIO ribbon cable pass-through
• Micro SD card access port
• Mounting option 1: two M3.5/M3/#6 screws slide into wall mounts
  for easy removal, horizontal orientation with A/V side down, 40mm spacing
• Mounting option 2: four M3.5/M3/#6 screws through feet from inside for
  secure mounting in any orientation, 68.3 x 38.8mm spacing
• Self-adhesive rubber feet included, set of 4
• Matte finish hides fingerprints

• External dimensions: 97 x 66 x 41mm
• Internal volume for breakout boards: 90 x 60 x 28.8mm

 with a maximum stall torque of 11 kg/cm. Like other RC servos the motor rotates from 0 to 180 degree based on the duty cycle of the PWM wave supplied to its signal pin.

• Product: MG996R Servo
• Torque: 9kg/cm(4.8V), 11kg/cm(6V)
• Speed: 0.19s/60°(4.8V), 0.18s/60°(6V)
• Rotate angle: 180°
• Operating voltage: 4.8 ~ 6V
• Gear: metal
• Dead band: 5us
• Weight: 55g
• Dimension: 40.7mm × 19.7mm × 42.9mm

• Model: B900M-T
• Weight: 41g
• Type: Lead-free soldering iron tips
• Point: 0.2mm
• Material: Oxygen free copper

• Model: B900M-T
• Weight: 20.7g
• Type: Pure Copper soldering tips
• Material: Pure copper

The IMX477 12.3MP Camera is a high quality camera module which adopts the IMX477R sensor, and requires a C- or CS-mount lens to work. It is compatible with Raspberry Pi Compute Module and NVIDIA Jetson Nano, offers higher resolution (12.3MP) and higher sensitivity (nearly 50% greater area per pixel for improved low-light performance) than IMX219 cameras.

The IMX477 12.3MP Camera is suitable for industrial and consumer applications like security camera, and other specialist optical devices which require higher level of visual fidelity.



Specifications:

What's in the box ?

1. IMX477 12.3MP Camera main unit
2. C-CS adapter
3. Dust cap
4. FFC ribbon

It features a knurled adjustment ring to move the main lens for zoom-factor, you then focus by changing the distance to the subject. Kinda the opposite way to the human eye. Spooky!

The satin-black main barrel has a diameter of 39mm nominal for the most part, if you want to build a mount and it comes with 2 lens caps for the top and base. The whole lens is 107mm long.

We recommend plenty of supplementary light on the subject when using this lens. A simple LED torch or maybe a Unicorn HAT on full-beam will usually do the trick.

Specifications:

• zoom - 0.12 - 1.8x 
  
• 39mm Diameter
• Top and bottom base caps
• Length - 107mm

• High temperature masking tape
• Frequency conversion power supply in the electronics industry. Also use as perfect heat resistance ribbon on 3d printing, powder coating, etc
• PCB protection during wave soldering
• Insulation on transformers, motors and coils
• Fiber Optic Cables
• Solar panels

• 100% new and high quality
• Material: Polyimide
• Color: Brown Metallic
• Width: 3/5/8/10/15/20/25/30/35 / 40mm
• Length: 30 M
• Long term temperature: 260 ° C degrees
• Short term temperature: 300 ° c.

polysilicon solar panel, widened chips, larger receiving area, capturing trivial source

anodic oxidation aluminum alloy material, multi layers structure, waterproof and durable

for reference ONLY, the Raspberry Pi, display, solar power manager are NOT included. 

Outline Dimensions