Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
Go on.....give away your age. You remember these?
R6,186.08  Inc VAT
R8,990.80
R804.60  Inc VAT
R899.90
R499.90  Inc VAT
This micro SD card to SD card extension cable is perfect for protecting your Raspberry Pi's micro SD card port.
R74.90  Inc VAT
Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT.
R139.90  Inc VAT
ATmega328P Arduino Compatible Nano V3 Improved Version (Arduino nano)
This Arduino Nano comes with the old bootloader

Specifications:

Microcontroller Atmel ATmega328
Operating Voltage (logic level): 5V
Input Voltage (recommended): 7V ~ 12V
Input Voltage (limits): 6V ~ 20 V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 8
DC Current per I/O Pin: 40mA
Flash Memory: 32KB (ATmega328) (of which 2 KB used by bootloader)
SRAM: 2KB (ATmega328)
EEPROM: 1KB (ATmega328)
Clock Speed: 16MHz

Package includes:

1 x Arduino Compatible Improved Version Nano V3.0 with headers pre-soldered

Getting started with Arduino products
R79.90  Inc VAT
Counter Top Arcade 2 player ****COLLECTION ONLY**** (arcade 2 player)
These arcades are available in different designs and colours. Please give us a call at 087 702 2764 for availability.

Pishop has created this pre-built beauty that will take you back to the good old days. We made them just a little bit smaller to fit on your lapa or kitchen table. 550mm x 540mm x 890mm with a 19.5 inch display.

Dual player controls with all the good 2D games you remember.
We also include a T16 remote control for easy use on Kodi as a media center.

Unfortunately we cannot offer the standard flat rate R100 shipping on these units as they are too heavy and bulky. Please also ask about shipping rates to your area. You are as always still welcome to collect at our premises.

Cabinet:

Proudly locally designed and manufactured 11 panel arcade case with high quality matt vinyl wrapping.
550mm x 540mm x 890mm (LxWxH)

Display:

Tech Specs

 

Product Description

Mecer LED monitor - 19.5"

Device Type

LED-backlit LCD monitor - 19.5"

Aspect Ratio

16:9

Native Resolution

1366 x 768 at 60 Hz

Brightness

250 cd/m²

Contrast Ratio

5000000:1 (dynamic)

Response Time

2 ms

Colour Support

16.7 million colours

Input Connectors

VGA/HDMI

Colour

Black

 

Sound system:

Tech Specs

 

Product Description

Logitech Z211 - speaker system

Product Type

Speaker system - 2.1-channel

Localisation

EMEA

System Components

2 speakers, subwoofer

Speaker Type

Active

Amplifier

Integrated

Power Options

USB powered


Power supply:

Specifications:
Input Voltage:AC 110/220V
Output Voltage:DC12V
Max Current:5A
Power:60W
Frequency:50/60Hz
Size:About 110mm x 79mm x 37mm

https://www.pishop.co.za/store/power-other/110220v-12v-5a-miniature-switching-power-supply

Zero delay controller x 2:

https://www.pishop.co.za/store/arcade/zero-delay-arcade-usb-encoder_1132

Features

  • "Zero Delay" Lag-Free USB Encoder
  • Plug and Play USB Encoder
  • Fully Compatible with Raspberry Pi (in addition to Windows/XP etc.)
  • Includes Wiring Loom
    • USB to Microcontroller
    • 1 x 5 Pin Joystick Loom
    • 16 x 2 Pin JST Button Wires 
  • Encoder Inputs
    • 1 x 5 Pin Joystick Input
    • 1 x 10 Pin Joystick Input
    • 12 x Unmapped Button Inputs
    • 4 x Hardware Preset Button Input
      • AUTO - For autofire
      • TURBO - For rapidfire
      • CLR - Clears AUTO/TURBO
      • MODE - Sets thumb-joystick mode
    • Dimensions: 85mm x 35mm x 10mm


Buttons x 16:

https://www.pishop.co.za/store/arcade/arcade-button-blade-type-red

LENGTH: 6,2 cm
WIDTH: 3,7 cm
CIRCUMFERENCE: 19 cm
WEIGHT : 40g

Joystick x 2:

https://www.pishop.co.za/store/arcade/round-8-way-joystick

LENGTH: 10cm
WIDTH: 9cm
CIRCUMFERENCE: 28cm
WEIGHT : 160g 

This joystick works using blades instead of switches.
The blades are replaceable and available as listed parts.

 

Pi 3 model B:

https://www.pishop.co.za/store/raspberry-pi-boards/raspberry-pi-3---model-b

Specifications

  • Processor
    • Broadcom BCM2387 chipset.
    • 2GHz Quad-Core ARM Cortex-A53 (64Bit)
    • 11 b/g/n Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE)
  • GPU
    • Dual Core VideoCore IV® Multimedia Co-Processor. Provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode.
    • Capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs with texture filtering and DMA infrastructure
  • Memory
    • 1GB LPDDR2
  • Operating System
    • Boots from Micro SD card, running a version of the Linux operating system or Windows 10 IoT
  • Dimensions
    • 85 x 56 x 17mm
  • Power
    • Micro USB socket 5V, 2.5A if you want to add some power hungry USB devices

Connectors

  • Ethernet
    • 10/100 BaseT Ethernet socket
  • Video Output
    • HDMI (rev 1.3 & 1.4)
    • Composite RCA (PAL and NTSC)
  • Audio Output
    • Audio Output 3.5mm jack
    • HDMI
    • USB 4 x USB 2.0 Connector
  • GPIO Connector
    • 40-pin 2.54 mm (100 mil) expansion header: 2x20 strip
    • Providing 27 GPIO pins as well as +3.3 V, +5 V and GND supply lines
  • Camera Connector
    • 15-pin MIPI Camera Serial Interface (CSI-2)
  • Display Connector
    • Display Serial Interface (DSI) 15 way flat flex cable connector with two data lanes and a clock lane
  • Memory Card Slot
    • Push/pull Micro SDIO ………………………………………………………………………………………………………………………………………..
    • Power Converter for sound and Pi:

SD card
Comes pre-loaded with the following software:

Software:


All games loaded are from “My abandon ware”:

https://www.myabandonware.com/browse/developer/A/

How to load new games:

https://www.youtube.com/watch?v=YDdN6HieYvA

Go on.....give away your age. You remember these?
R6,186.08  Inc VAT
R8,990.80
Dexter - BalanceBot Extension Kit (dexter balance kit)

Build a BalanceBot with the Raspberry Pi! 

The BalanceBot extension kit takes your GoPiGo3 and turns it into an upright balancing robot! Kit includes an IMU sensor, IR receiver, IR remote control and a set of 3 sensor mounts. Program examples provided in Raspbian for Robots in Python.

Please Note. The GoPiGo3, Raspberry Pi and other associated hardware are NOT included in this purchase.


What’s included:

  • BalanceBot Power Cable (longer than the original one that comes with the GoPiGo3 base kit)
  • IMU Sensor
  • Infrared Reciever Sensor
  • Infrared Remote Control
  • Sensor Mounts (s/3)

What else do I need:

NOTE: This expansion kit will not work with the GoPiGo2.

R804.60  Inc VAT
R899.90
The Official Raspberry Pi Beginners Guide 4th Edition (RPi beginner guide 4th)

Fully updated for Raspberry Pi 400, Raspberry Pi 4, and the latest software, this 252-page official Raspberry Pi book is crammed with projects and beginner’s guides containing all the information you need to get started using your new computer!

Learn how to set up your Raspberry Pi, install an operating system, and start using it. Follow step-by-step guides to code your own animations and games, using both the Scratch 3 and Python languages. Create amazing projects by connecting electronic components to Raspberry Pi’s GPIO pins. Plus much, much more!


• Set up your Raspberry Pi, install its operating system, and start using this fully functional computer.
• Start coding projects, with step-by-step guides using the Scratch 3 and Python programming languages.
• Experiment with connecting electronic components and have fun creating amazing projects.


R149.99  Inc VAT
GPIO Reference Board (Model B+,A+,2B and 3B) (gpio ref 40pin board)

RASPBERRY PI NOT INCLUDED(Neither the key-ring and keys for those who wondered)

This cute little GPIO reference board from allows you to quickly and easily distinguish between the different pins of the Raspberry Pi Model B+, Raspberry Pi 2B, Pi 3B and Pi 3B+. It's even got a key chain hole, so you can carry it around and keep it handy - you'll never know when you need to hack a Pi!

The GPIO reference board features BCM numbering on one side and the pin names on the other. It can be soldered for permanent referencing, or slipped on and off when required.

Dimensions:
 
Width = 67mm
Height = 19mm
Thickness = 0.8mm

On the RPi3 and later you'll have to snip off a little bit of the corner closest to pin 39 thanks to the new POE pins on the board
R32.90  Inc VAT
Soil Hygrometer Humidity Detection Moisture Sensor (moisture probe hygrometer)

This is a summary of the soil moisture sensor that can be used to detect moisture, when the soil is dry, the module outputs a high level. Use this sensor to build an automatic watering system.


Operating voltage: 3.3V~5V.
Adjustable sensitivity (blue digital potentiometer adjustment)
Dual output mode,analog output more accurate.
A fixed bolt hole for easy installation.
Power indicator (red) and digital switching output indicator (green).
LM393 comparator chip, stable.
PCB Dimension: 3cm x 1.5cm.
Soil Probe Dimension: 6cm x 2cm.
Cable Length: 21cm.

VCC: 3.3V-5V.
GND: GND.
DO: digital output interface (0 and 1).
AO: analog output interface.

Setup with Raspberry Pi

Package Includes:

1 x Soil moisture detector module
1 x Probe
5 x Jumper Cables

R19.90  Inc VAT
IQaudIO DigiAMP+ (IQaudio Digi Amp +)

DigiAMP+ is a HAT compliant add on accessory for the Raspberry Pi.
DigiAMP+ uses the Texas Instruments TAS5756M PowerDAC to deliver direct connection to
PASSIVE s tereo speakers at up to 2x35wpc with variable output. Ideal for a Pi based HiFi.
DigiAMP+ can be connected to the Raspberry Pi A+/B+/RPi2/RPi3 or RPi4's 40way pin header
without any additional soldering.
DigiAMP+ must be powered from an external supply and requires a 1 2 to 24DC power source to
operate. DigiAMP+ s barrel connector is 5.5mmx2.5mm. DigiAMP+ has been designed to provide
power to the Raspberry Pi and DigiAMP+ combination in parallel, delivering 5.1v 2.5Amp to the Pi.

DO NOT APPLY POWER TO THE RASPBERRY PI’s OWN POWER INPUT WHEN USING DIGIAMP+.

The amplifier is by default muted at power on (mute LED lit). The mute state LED is under software
control (Raspberry Pi GPIO22).


P5 Alternative power input for hard wired installations. POLARITY MUST BE OBSERVED!
P8 TAS5756m Internal GPIO1/2/3
R499.90  Inc VAT
Tracking Robot Car Electronic DIY Kit With Reduction Motor (DIY track robot kit)


Tracking Robot Car Electronic DIY Kit With Reduction Motor





The assembly steps:


Step 1: Welding circuit

Soldering part is simpler, welding sequence according to the principle of component level from low to high, the first welding eight resistance, is important to use multimeter to confirm resistance is correct, D4, D5 R13 R14 can temporarily not welding, integrated circuit chips can temporarily not inserted

Step 2: Mechanical assembly

The red line is connected to the 3V positive power supply, the yellow line grounding, excess wire can be used for motor wire.

Step 3: The installation of a photoelectric circuit

Photosensitive resistance and light-emitting diodes (note polarity) is reverse-mounted on the PCB, and the ground distance is about 5 mm, both photosensitive resistance and light-emitting diodes are 5 mm distance. Finally, you can power test.

Step 4: Vehicle debugging

The right direction is along the universal wheel direction, if you press and hold the left photoresistor, the wheels on the right side of the car should be rotated. Press and hold the right photoresistor, the wheels on the left side of the car should be rotated, if the car driving back, can also exchange the wiring of two motors, if the one side normal and the other side back up, as long as you can swap wiring of back side.

Note: We don't supply any manuals please note this before you buy it.

Package includes:

1 x Electronic DIY Kit (batteries are not included)





R219.90  Inc VAT
Sound Detection Sensor LM393 Chip (sensor sound detection)

Can be used for Acoustic control light; give sound and light alarm working with Photosensitive sensor
Note:The Maximum induction distance is 0.5M

Features
 
  • Main Chip: LM393, Electret condenser microphone
  • Working Voltage: DC 4-6V
  • Signal output indication
  • Single channel signal output
  • The output effective signal is low level
  • When there is sound,output low level and the signal lights
Find help with this sensor at https://www.instructables.com/id/Sound-Sensor-Raspberry-Pi/
R12.90  Inc VAT
Potentiometer single turn carbon linear PCB 2K (potentio 2k)

Single turn 2K

  • Linear
  • Carbon
  • PCB type
  • 5mm pitch pin
  • Spline shaft
  • 17mm diameter
  • 0.2W
  • Shaft length 10mm
  • Shaft diamter 6mm

Resources:
Python Library
Definition, Types, And Working Principle
R9.90  Inc VAT
LED RGB Common Cathode 4-Pin F5 5MM Diode (5 pack) (LED RGB (5))
Features:
 
Convenient for DIY projects
Perfect use for home, office and industry electrical equipment and electrical appliances
Current : 3V
Voltage: 20 mA
Size: 5mm 
Light Color: RED, BLUE, GREEN
Total Quantity: pack of 5

Read the Docs
https://gpiozero.readthedocs.io/en/stable/recipes.html#full-color-led
R8.90  Inc VAT
1N4001 Rectifier Diode 50V 1A (5 pack) (1N4001 Diode 1A(5))
Please note: Pic is for illustration purposes only

1N4001 Diode, rectifying, standard 1A 50V DO-41

Pack of 5 units
 

Resources:
Intoduction
Basics, Types, Characteristics, Applications & Packages
R4.03  Inc VAT
GPIO Breadboard Breakout Kit (GPIO breakout kit)
We created this bundled breakout kit for easy connection from your Raspberry Pi GPIO to the breadboard.
The bundle is discounted to save you some hard earned cash rather than paying full price for loose components.

Package includes:

1 x BreadBoard 400 tie points
1 x 40-Pin Gray Ribbon Cable (29cm)
1 x GPIO T Board for easy breadboard connection
R99.90  Inc VAT
Micro SD to SD Extension Cable 45cm (micro to SD ext cable)

This micro SD card to SD card extension cable is perfect for protecting your Raspberry Pi's micro SD card port! The flat flex cable is 45cm long, so it's perfect for mounting your SD card separately for easy access, or mounting your Raspberry Pi safely within an enclosure!

Micro SD to SD Extension Cable Features:

  • Micro SD Card Male to Full Size SD Card Female
  • SD Card Plastic Housing Case: 51mm x 35mm x 11mm
  • Flex Cable ~ 45cm
  • Supports SD Card Sizes: 16GB, 32GB 64GB 128GB
  • Supports SD/SDHC/SDXC Cards
  • Push/Push SD Card Slot
This micro SD card to SD card extension cable is perfect for protecting your Raspberry Pi's micro SD card port.
R74.90  Inc VAT
WS Raspberry Pi Night Vision Camera (IR-CUT) (Night Vision IR-CUT)

Features

  • Raspberry Pi Camera, supports all revisions of the Pi
  • Embedded removable IR-CUT filter, eliminating color distortion in the daylight
  • Comes with infrared LED, supports night vision
  • 5 megapixel OV5647 sensor
  • Adjustable focus distance
  • Camera specifications
    • CCD size : 1/4inch
    • Aperture (F) : 1.8
    • Focal Length : 3.6mm
    • Angle of View (diagonal) : 75.7 degree
    • Sensor best resolution : 1080p
  • 4 screw holes
    • Used for attachment
    • Provides 3.3V power output
    • Supports connecting infrared LED and/or fill flash LED
  • Dimension: 31mm × 32mm

Note: to use the camera with Raspberry Pi Zero / Zero W / Zero WH, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera Cable


Development Resources

Getting started with PiCamera
Wiki :
www.waveshare.com/wiki/RPi_IR-CUT_Camera

R379.90  Inc VAT
500Pcs 5MM LED Diode Kit Mixed Color Red Green Yellow Blue White (500 5mm LED kit)
Description:

There are 5 colours 5MM Red Green Yellow Blue White each 100Pcs, total 500Pcs

Parameter:

Working current: 20 (mA)
Working voltage:
  • Red: 1.9V-2.1V
  • Yellow: 1.9V-2.1V
  • Blue:3.0V-3.2V
  • Green: 3.0V-3.2V
  • White:3.0V-3.2V
MCD:
  • Red:300
  • Yellow: 300
  • Blue:700-900
  • Green: 400-500
  • White:12000-14000
Wave length:
  • Red: 630-635
  • Yellow: 588-590
  • Blue:460-465
  • Green: 567-570
  • White:Color temperature 8000

Package includes:

500 x 5MM LED Diode

Specification:
ColorSizeWavelength(nm)Voltage(V)MCDLens color
Red5mm620-6301.8-2.3800-1000Red diffused
Yellow5mm580-5901.8-2.3800-1000Yellow diffused
Green5mm520-5302.8-3.6800-1000Green diffused
White5mm6000-6500k2.8-3.614000-16000Clear
Blue5mm460-4702.8-3.6800-1000Blue diffused

Resources:
Python library
Introduction
R269.90  Inc VAT
SparkFun Logic Level Converter Bi-Directional (Sparkfun logic level converter )

If you’ve ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The SparkFun bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time.

This level converter also works with 2.8V and 1.8V devices. What really separates this Logic level converter from our previous versions is that you can successfully set your high and low voltages and step up and down between them safely on the same channel. Each level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side.

The level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the ‘HV’ pin, low voltage (3.3V for example) to ‘LV’, and ground from the system to the ‘GND’ pin.

Dimensions: 0.63 x 0.52" (16.05 x 13.33mm)

Documents:

R59.90  Inc VAT
GPIO Hammer Header Jig Kit(Solderless) (hammer header jig kit)

Raspberry Pi Zero not included!

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT.

Male + Female + Installation Jig

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers might be just the job. They come in male and female flavours, and use crafty little retaining nubbins to grip tightly into the holes on the PCB.

The installation jig kit contains two acrylic base pieces, onto which your Pi Zero or pHAT sits, two nylon bolts, an acrylic top piece onto which you hammer, and both a male and female header. Make sure you carefully read our guide for fitting hammer headers.

We strongly recommend using our installation jig! If you want to try without it then godspeed to you but it is a delicate and tricky process! The female headers are simpler to insert than the male headers as you can hammer straight onto the plastic of the header, but the male ones are particularly tricky without the jig.

Please note: we can't be held responsible for any damage that you may cause to your Pi Zero, pHAT, fingers, or headers while fitting them. If you follow our guide carefully then you should be fine. If this worries you, then get yourself a soldering iron instead!

Loose Male hammer headers are also available.

Tutorial on using the jig

Watch our demo of how to fit the hammer headers on Bilge Tank, below.

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT.
R139.90  Inc VAT
M3 Delta Adjustable Pulley 3D Printer Injection Molded Piece (M3 delta belt coupler)
Features:

Bore distance: 20mm x 20mm
For: M3 (Both sides of the screw)
Suitable belt: GT2 / MXL 6mm (note: belt not included)
Material: High strength nylon

Package includes:

1 x M3 Delta Adjustable Pulley


M3 Delta Adjustable Pulley 3D Printer Injection Molded Piece
R99.90  Inc VAT
SC8UU 8mm Aluminium Linear Motion Ball Bearing Slide Bushing For CNC (Linear 8mm Bearing Slide)
Features :

The universal Ball Bearings is great for you to replace the damaged Ball Bearings in your devices to improve efficiency and save energy.
Widely used in home appliances, industrial, low noise and high speed electric motors, construction machinery, automotive components, pumps, and machinery. Smooth moving, low friction, high rigidity and long life. Economical, easy to maintain replace.

Specifications :

Model : SC8UU
Material : Steel, Aluminum
Size : Approx. 34 x 30 x 22cm / 1.34 x 1.18 x 0.87"
Inner Diameter : Approx. 8mm / 0.31"

Package included :

1x SC8UU Linear Motion Ball Bearing
R109.90  Inc VAT
Per Page      1 - 20 of 167