Search
Search Criteria
Products meeting the search criteria
Description:
These premium jumper cables are a little over 200mm long.
Ribbon of 40 mate to female
Specification:
- 40 x 200mm
- Male to Female
Features:
- Tested for Compatibility with the Raspberry Pi
- Breadboard compatible
- Colour: Multi-coloured
Contents:
- 40 x 200mm Male to Female Jumper cables
Description:
These male to male breadboard jumper wires provide an easy way for you to build your own circuitry on a breadboard. These cables are flexible with both ends of a prototyping board connector. The jumper wire is ideal for creating circuits between your microcontroller and breadboard.
Specifications:
- Random colours: white, yellow, orange, blue, black and red (as shown in picture)
- Material: plastic + tin plated copper
- Outer Diameter: 0.643mm
- Nominal Wire Area: 0.3247 sq. mm
Pack consists of:
- 4 x 175mm wires
- 4 x 230mm wires
- 8 x 125mm wires
- 49 x 95mm wires
Contents:
- 1 x Pack of 65 x Jumper Wires for MB102 Solderless Breadboard
Resources:
Description:
Female to Female Jumper Wire Cable Line Multicolored 300mm
Specifications:
- Multicolored
- 300mm
- Female to Female
Contents:
- 1 x Ribbon of 40 lines
Resources:
This bundle contains ten leads with crocodile clips at each end
Two of each of five colour cords: black, green, red, white and yellow
The PVC sleeves on the crocodile clips match the colour of the cables
This bundle is ideal for use with your micro:bit
Total length: about 150M (1 pc)
Wire type: 30AWG
Single core wire outer diameter: 0.55mm
Copper core diameter: 0.25mm.
Temperature: 80 degrees, single-strand copper core crossing tin, with antioxidant effects.
Color: Black
Package includes:
1 x Black wire wrap
Total length: about 150M (1 pc)
Wire type: 30AWG
Single core wire outer diameter: 0.55mm
Copper core diameter: 0.25mm.
Temperature: 80 degrees, single-strand copper core crossing tin, with antioxidant effects.
Color: Red
Package includes:
1 x Red wire wrap
10 x 2.54mm jumper cap
PLEASE NOTE: RASPBERRY PI IS NOT INCLUDED
The ModMyPi Paddle Breakout HAT enables you to bring the Raspberry Pi B+/2/3 GPIO out from your Raspberry Pi to 'push wire' paddle terminal points in the form of a neat HAT! This kit requires absolutely no soldering, but will allow you to jump straight from the Pi to your project or breadboard without the use of a cobbler kit. All terminals are labelled on the PCB silkscreen, and have been re-ordered in a simple to use format.
The 'push wire' terminals can be utilised with solid core wire stripped to around 10mm of exposed copper.
The ModMyPi Paddle Breakout HAT Features:
- Fully Labelled Silkscreen for Easy Identification
- Push Wire Terminals for Quick & Easy Connections
- Pre-assembled HAT - No Soldering Required
- Includes 40 Pin HAT Header - Plug & Play
- Includes M2.5 Stand-Off's for Mounting
- Manufactured in the UK!
Description:
- Material: Plastic and Metal
- Total length of about 280M Line: 30AWG
- Single sheath outer diameter of about: 0.55mm, copper core diameter of about 0.25mm.
- Temperature: 80 degrees, single-strand copper crossing tin, have antioxidant effects.
Packaging:
- 1 x PCB Test Core Line Single Tinned Copper Wire 8-color Board Cable Roll
- Solid and durable.
- Ensures high-amp connection.
- Low resistance for high current capacity.
- Superior technology suited to today's high power applications.
- Ergonomically designed and easy to grip.
- Easy to un-solder and reuse.
- Used in RC battery and motor projects
Specifications:
- Model: XT60
- Color: Yellow (as picture)
- Size: Approx. 23mm x 16mm
- Material: Copper+PA66
1 x pair XT60 Bullet Connector Plugs(1 x Male + 1 x Female)
4 Pin Grove cables designed for use with the Grove System. They are used for connecting a Base Shield to a Grove sensor, actuator, or device. Since Grove Shields support connections to multiple devices at the same time, projects may require more than one Grove Cable.
These cables are compatible with all modules included in the Grove system. This pack includes 5 grove cables, all 20cm in length
Features:
- Grove - Universal 4 Pin 20cm Unbuckled Cable
- 200mm Length
- 4 Pin "Grove" Connector
- User Guide
Dimension: 16.7 x 5.7 x 1cm
Tie Points: 830 tie points (consists of: 630 tie-point terminal strips, 200 tie-point distribution strips)
Matrix: 126 separate 5 point terminals, plus 4 horizontal bus lines (Power Lines) of 50 test points each
Jumper size: Suitable for 20~29 AWG (0.3mm ~ 0.8mm) wires
MB-102 Power Supply Module:
Input voltage: 6.5V ~ 12 V DC / USB power supply
Output voltage: 3.3V / 5V select with jumpers
Maximum output current: <700mA
Fluctuation two road independent control, can switch over to 0V, 3.3V, 5V
On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use
Size: 5.3 x 3.2 x 2.5cm
Jumper Cables:
Breadboard jumper cable male to male
Typically used for electronics projects
Wires are flexible, durable, reusable, easy to trace
Easy to connect and disconnect
Kit includes:
1 x 830 tie point Solderless Breadboard
1 x MB-102 Breadboard Power Supply
65 x Breadboard Jumper Cables male to male
40pcs chromatic male to male color jumpers
40pcs chromatic color female to female jumpers
40pcs chromatic male to female color jumpers
Durable and reusable
Easy to use
A popular choice for constructing electronic projects
Use for electronic projects as including Raspberry Pi and Arduino projects
Specifications:
Length :10cm
Compatible with 2.54mm spacing pin headers and breadboards
Kit includes:
1 x ribbon of 40pcs male to male jumpers
1 x ribbon of 40pcs female to female jumpers
1 x ribbon of 40pcs male to female jumpers
Great for electronics prototyping.
Compatible with Arduino and Raspberry Pi projects.
Box size(L*W*H): 17 x 10 x 2.2 cm
Package includes:
1 x Plastic Box (Contains 610 PCS Connector Kit)
Note:
Artificial pick, please allow an error of 2%, thank you.
- 1