Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
R63.25  Inc VAT
R74.90
R169.90  Inc VAT
R179.90  Inc VAT
ATMEGA8 ATMEGA8A-PU DIP28 (Arduino IC)
Description:

The ATMEGA8A-PU is a high-performance, low-power 8-bit AVR RISC-based Microcontroller combines 8kb ISP flash memory with read-while-write capabilities, 512B EEPROM, 23 general purpose I/O lines, 32 general purpose working registers, three flexible timer/counters with compare modes, internal and external interrupts, serial programmable USART, a byte oriented two-wire serial interface, 6-channel 10-bit A/D converter (8-channel in TQFP and QFN/MLF packages), programmable watchdog timer with internal oscillator, SPI serial port and five software selectable power saving modes. The device operates between 2.7 to 5.5V. By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and processing speed.

  •     High-performance, Low-power AVR® 8-Bit Microcontroller
  •     Advanced RISC Architecture
  •     High Endurance Non-volatile Memory Segments
  •     Atmel QTouch® Library Support
  •     Power-on Reset and Programmable Brown-out Detection
  •     Internal Calibrated RC Oscillator
  •     External and Internal Interrupt Sources
  •     Idle, ADC Noise Reduction, Power-save, Power-down and Standby Sleep Modes
  •     2.7 to 5.5V, 0 to 16MHz Operating Voltage
  •     3.6mA Active, 1.0mA Idle Mode and 0.5µA Power-down Mode Power Consumption

Applications:

Building Automation, Consumer Electronics, Motor Drive & Control, Industrial, Automation & Process Control, Metering
R63.25  Inc VAT
R74.90
Raspberrry Pi RP2040 microcontroller (RPi RP2040 microcontroller)
Raspberry Pi RP2040 is the first microcontroller designed in-house at Raspberry Pi (“Raspberry Silicon”).

It features:
• Dual-core Arm Cortex-M0+ @ 133MHz
• 264KB of on-chip RAM
• Support for up to 16MB of off-chip Flash memory via a QSPI bus
• DMA controller
• Interpolator and integer divider peripherals
• 30 GPIO pins, 4 of which can be used as analogue inputs
• 2 × UARTs, 2 × SPI controllers, and 2 × I2C controllers
• 16 × PWM channels
• 1 × USB 1.1 controller and PHY, with host and device support
• 8 × Raspberry Pi Programmable I/O (PIO) state machines
• USB mass-storage boot mode with UF2 support, for drag-and-drop programming


Please see the RP2040 datasheet for more details

and Hardware Design with RP2040

To date, RP2040 has only been available on Raspberry Pi Pico, and as a component to a limited number of partners. We now cover the availability of RP2040 as a component to the broad market in single-unit quantities. Bulk quantities on reels of 500 and more available soon.

R16.05  Inc VAT
PGA2040 (PGA2040)
PGA2040


Description:

PGA2040 is a compact RP2040 breakout intended for the most svelte and embeddable of projects. It contains only the components necessary to run the RP2040 (that's the crystal, flash, regulator and essential support circuits) and it has no fripperies like LEDs, buttons and USB connectors - you'll need to attach your own USB connector to be able to program it.

The benefits of all this drastic pruning are a tiny, 21mm square footprint and lots of exposed RP2040 pins to play with! 30 of them can be used as general purpose I/O (that's four more I/O than on a Raspberry Pi Pico) and 4 are ADC-equipped. It also has the cutest little pin labels in the known 'verse, because space is tight on this board.

Header pins are sold separately - you can solder it to standard Pico pin headers (though bear in mind you'll need 48 pins if you want to populate it fully). If you want to fully commit to the aesthetic we also have custom PGA pin headers and sockets you can use to turn PGA2040 into a full faux-retro 486-era device that can be plugged into your projects.

Like our other RP2040 boards, PGA2040 is programmable with C++, MicroPython or CircuitPython - choose your fighter!


Specifications:

  • Powered by RP2040
  • Dual ARM Cortex M0+ running at up to 133Mhz
  • 264kB of SRAM
  • 8MB of QSPI flash supporting XiP
  • Crystal oscillator
  • On-board 3V3 regulator (max regulator current output 300mA)
  • 48 pins, arranged with 2.54mm (0.1") spacing in a Pin Grid Array
  • 30 multi-function General Purpose IO (4 can be used for ADC)
  • 8 GND pins
  • Input voltage range 3V - 5.5V (on VB pin only)
  • Measurements: approx 21mm x 21mm x 3mm (L x W x H)
  • Schematic
  • Eagle CAD part

What's in the box ?

1 x PGA2040








Getting Started :

PGA2040 is firmware agnostic! You can program it with C/C++ or MicroPython in the same way as you would a Raspberry Pi Pico. You can find (lots) more information on how to do that (as well as download links for the firmware/SDK) on the RP2040 landing page.

You can also use CircuitPython on your PGA2040! CircuitPython is an easy to use, well-established ecosystem with lots of example code and drivers for interfacing with different kinds of hardware. Click here to download the CircuitPython firmware for PGA2040 and click here for a getting started guide.

To program PGA2040 via USB you will need to hook wires up to VB, GND, U+ and U-. Make sure that the 5v only goes to VB on PGA2040, if it ends up elsewhere it will result in a bad time. A USB breakout board is a convenient way of getting at the wires in your USB cable, check out the extras tab for some options!

To get into BOOTSEL mode so you can flash firmware to your PGA2040, connect the BS pin to ground whilst plugging the USB into your computer.



About RP2040

Raspberry Pi's RP2040 microcontroller is a dual core ARM Cortex M0+ running at up to 133Mhz. It bundles in 264kB of SRAM, 30 multifunction GPIO pins (including a four channel 12-bit ADC), a heap of standard peripherals (I2C, SPI, UART, PWM, clocks, etc), and USB support.

One very exciting feature of RP2040 is the programmable IOs which allow you to execute custom programs that can manipulate GPIO pins and transfer data between peripherals - they can offload tasks that require high data transfer rates or precise timing that traditionally would have required a lot of heavy lifting from the CPU.


 

R169.90  Inc VAT
Monkmakes SSR (Monkmakes SSR)
Description:

The MonkMakes SSR is a low voltage solid state relay (no moving parts). This makes it super-easy to control loads of up to 2A at 16V from an Arduino, Raspberry Pi or other 3 or 5V microcontroller or single board computer.

This modern take on the electro-mechanical relay can even be used for low frequency PWM to control the power to its load.


Specifications:

This relay can be used to switch low voltage devices such as light bulbs, a motor, a small heating element or even a string of 12V LED lighting. The voltage needs to be kept under 16V, but the relay will automatically protect itself against too much current.

• Solid-sate relay up to 2 Amp Peak 1A continuous AC/DC
• Active LED indicator
• Resettable ‘polyfuse’ to protect against over-current
• Great for Arduino and Raspberry Pi
• Suitable for low frequency PWM





What's in the box ?

1 x Monkmakes SSR board



Resources:

Datasheet(PDF)








(* ONLY SSR -Solid State Relay - Included - all other products are for reference use only*)
R179.90  Inc VAT
Per Page      1 - 4 of 4
  • 1