Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
R109.90  Inc VAT
This neat little board plugs directly into the Raspberry Pi GPIO header and provides 2 or 4 connectors for small stepper motors
R299.90  Inc VAT
RPi Touch Keypad (RPi touch pad hat)
Features
  • Supports any revision of Raspberry Pi (directly-pluggable)
  • Provides your Pi with 16 touch keys
  • Features TONTEK TonTouch touch pad detector IC TTP229-LSF, supports up to 16 keys with adjustable sensitivity and built-in LDO
  • The system re-calibrates automatically when all keys are not detected touch more than about 4 seconds
Specifications
  • Interface : I2C
  • Keys : 16
  • Sampling rate : 8Hz
  • Human Body Mode : 6KV
  • Operating voltage : 2.4V-5.5V
  • Operating temperature : -40℃ to 85℃
  • Storage temperature : -50℃ to 125℃
  • Dimensions : 8.5CM × 5.6CM
How to Use
  • After power-on have about 0.5sec stable-time. During the time do not touch the key pad, and all functions are disabled
Pinouts
  • VCC : Power supply (2.4V-5.5V)
  • GND : Ground
  • SDA : I2C SDA
  • SCL : I2C SCL
Dimensions



Downloads/Development resources: 

schematic, demo code, datasheets, etc.
Download: www.waveshare.com/wiki/RPi_Touch_Keypad


R109.90  Inc VAT
ws 2-DOF Pan-Tilt HAT kit for Raspberry Pi (WS pan/tilt kit)
Overview

This is a 2-DOF pan-tilt kit designed for Raspberry Pi. With onboard PCA9685 PWM chip and TSL2581 ambient light sensor, it allows the Pi to control camera movement and sense light intensity through I2C interface.

Features
  • Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B
  • I2C interface, only 2 pins are required for moving and light intensity sensing
  • Onboard PCA9685 chip, provides 12-bit resolution PWM signal for moving control
  • Onboard TSL2581FN light-to-digital converter, with embedded ADC, provides a value that approximates the human eye response to assist the module
  • Onboard voltage level translator, compatible with 3.3V/5V operating voltage
  • Specific acrylic board to fix the Raspberry Pi camera, make it easy to install
  • Comes with development resources and manual (demo code, assembly guide)
Specifications
  • PWM driver: PCA9685
  • PWM resolution: 12-bit
  • Ambient light sensor: TSL2581FN
  • Ambient light resolution: 16-bit
  • Communication interface: I2C
  • Operating voltage: 3.3V/5V
  • Dimension: 56.6mm x 65mm
How to Assemble

A little assembly work is required to use the Pan-Tilt HAT, yet it's pretty easy to do, here's the assembly guide: https://www.waveshare.com/img/devkit/accBoard/Pan-Tilt-HAT/Pan-Tilt-HAT-assemble.jpg

Dimensions



Development Resources

Wiki : www.waveshare.com/wiki/Pan-Tilt_HAT

R329.90  Inc VAT
RPIZ_CT3T1 3 current and 1 Temperature 30A AC adapter for Raspberry Pi zero (lec zero 3 current 1 temp)

The RPIZ_CT3T1 is the same unit as the RPICT3T1 in the Raspberry pi Zero format.

Refer to the RPICT3T1 for full documentation.

Use with sct-013-000 split core current sensor and DS18B20 temp sensor

Please note: Raspberry Pi Zero and sensors are not included


R649.90  Inc VAT
RPIZ_CT3V1 3 current and 1 Volt 30A AC adapter for Raspberry Pi zero (lec zero 3 current 1 volt)

The RPIZ_CT3T1 is the same unit as the RPICT3V1 in the Raspberry pi Zero format.

Refer to the RPICT3V1 for full documentation.

Use with sct-013-000 split core current sensor and 230VAC to 9VAC power adapter

Please note: Raspberry Pi Zero and sensors are not included



R679.90  Inc VAT
LCD Keypad Shield LCD1602 LCD 1602 Module Display For Arduino ATMEGA328 ATMEGA2560 raspberry pi UNO blue screen (buttons blue backlight)
Description
  •     This is a basic 16 character by 2 line display.   
  •     Utilizes the extremely common HD44780 parallel interface chipset.   
  •     Interface code is freely available.   
  •     Blue Backlight with white words.   
  •     uses 4 Bit Arduin LCD Library.   
  •     Size:8cm x 5.9cm - 3.15inch x 2.32inch   


Package Content:

1 X Keypad Shield 1602 LCD

DFRobot WIKI
R87.90  Inc VAT
50cm HX2.54 4pin to 6pin White Terminal stepper Motor Connector cable (stepper cable 4 to 6pin 55cm)
Description:   

A collection of jumper cables with HX2.54 connectors on each side. Great for wiring your stepper motor to your driver board. Widely used on 3D printers, robotics and CNC machines.

Specifications:   

  • Four-lead motor connector XH2.54 white terminal 4pin-6pin motor line   
  • 3D Printer Stepper Motor Line   
  • Connector : 4pin to 6pin   
  • Length: 50cm  


What's in the box?

1 x 3D Printer Stepper Motor Line 50cm Length
R9.90  Inc VAT
Mini Round black 2 Pin SPST ON-OFF Rocker Switch (round black rocker switch round)
Description:

Rocker Switches house a button for operation that can be pressed on either end like a seesaw to connect or disconnect an electrical circuit. They are often used as ON/OFF switches on the main power supplies for electronic devices.

Features:

  • Rating: 3A 250V
  • Mounting hole: 20mm
  • Poles: SPST
  • Terminal: 2-Pin(ON-OFF)
  • Contact resistance: ≤30mΩ
  • Insulation resistance: ≥100MΩ at 500V DC
  • Dielectric strength: 1500V AC for 1 minute
  • Operating temperature: -25°C - 85°C
  • Electrical life: 10000 cycles
  • Color: black

    Package included:

    1 x Mini round black rocker switch



Resources:

Introduction to Buttons and Switches
Types of buttons and switches

R29.90  Inc VAT
PiStep2 Quad Stepper Motor Control Board for Raspberry Pi (PiStep2 stepper hat)
Description:

This neat little board plugs directly into the Raspberry Pi GPIO header and provides 2 or 4 connectors for small stepper motors

  • Fully Assembled - No Soldering Required
  • Raspberry Pi Zero Form Factor - works with all versions of Raspberry Pi with 40pin GPIO connector
  • Stepper motors and Raspberry Pi not included

Various Power Options:

  1. Powered from the Raspberry Pi 5V
  2. From the 2-pin Terminal (whatever voltage is required for the motors)
  3. Micro-USB - 5V only

Pinout is simple:

  • Physical pins 11, 12, 13, 15 for Motor A (GPIO 17, 18, 27, 22)
  • Physical pins 16, 18, 22, 7 for Motor B (GPIO 23, 24, 25, 04)
  • Physical pins 33, 32, 31, 29 for Motor C (GPIO 13,12,6,5)
  • Physical Pins 38, 37, 36, 35 for Motor D (GPIO 20,26,16,19)

Each pin has an associated white LED so you can see the stepper signals going through

Power Supply Alternatives

  • Jumper VCC-VSTP (default). Power from the motors is taken from the Raspberry Pi 5V line
    • Micro-USB into Raspberry Pi. 5V for the Pi and the stepper motors goes through a poly-fuse which can trip if 2 motors are used simultaneously
    • Micro-USB into the PiStep board. 5V for both the Pi and the stepper motors is provided directly from the 5V USB input so no problems with 2 motors at once
  • Jumper VSTP-VIN. Power for the motors is provided from the 2-pin screw terminal, so can be any voltage that the steppers can handle. Ensure you use the correct polarity! We recommend to keep it below 12V. You will find that the stepper motors can go up to 9V and will be able to step faster, the higher the voltage that is applied, but there will be some deterioration of the life of the stepper motor at a higher voltage.

Python Programming

Please see the excellent example here for some pointers. You will need to change the pin numbers as above and also change the speed so it steps at a visible rate. You may also want to remove the print statements to speed it up. The lines in Red below are changed from the original to operate Motor A.

# Use BCM GPIO references
# instead of physical pin numbers
GPIO.setmode(GPIO.BCM)

# Define GPIO signals to use
# Pins 18,22,24,26
# GPIO24,GPIO25,GPIO8,GPIO7
StepPins = [17,18,27,22]

# Set all pins as output
for pin in StepPins:
  print "Setup pins"
  GPIO.setup(pin,GPIO.OUT)
  GPIO.output(pin, False)

# Define some settings
StepCounter = 0
WaitTime = 0.01

ScratchGPIO Programming

These pins are identical to those required by ScratchGPIO and therefore can easily be driven using simple Scratch commands:

Set motor type for Scratch to be Stepper motor

Set the position of the stepper motor A

Set the speed of the stepper motor A

This neat little board plugs directly into the Raspberry Pi GPIO header and provides 2 or 4 connectors for small stepper motors
R299.90  Inc VAT
WS 5inch HDMI LCD Bi-colour case for Raspberry Pi (5 inch display and bi-colour case)
Please Note: Raspberry Pi not included.

Description:

5 inch Resistive Touch Screen LCD, HDMI interface, Designed for Raspberry Pi. Mid-sized Raspberry Pi or SBC 5 Inch Touch LCD with HDMI interface! Especially useful for those smaller embedded projects, such as adding LCD control to CNCs or 3D printers. 

Specifications:

The LCD
  • 800×480 high resolution, touch control
  • Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable)
  • Drivers provided (works with your own Raspbian/Ubuntu directly)
  • HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os)
  • Backlight can be turned off to lower power consumption
  • High quality immersion gold surface plating
The Case
  • Material : high quality bicolor Acrylic, black and white
  • Comes with bottom holder, optional tilt angle, 45° or 60°
  • Features mounting holes for Raspberry Pi A /B /2B/3B

Development Resources

How to install: instructions

Wiki : www.waveshare.com/wiki/5inch_HDMI_LCD

Package Includes:

  1. 5inch HDMI LCD x 1
  2. HDMI connector x 1
  3. Touch pen x 1
  4. RPi screws pack (4pcs) x 1
  5. Bicolor Case for 5inch LCD × 1
  6. Screws Pack × 1

R749.90  Inc VAT
Wide Angle – Camera Module for Raspberry Pi Zero (zero cam wide angle)

How to use Picamera with Raspberry Pi OS Bullseye: https://www.youtube.com/watch?v=E7KPSc_Xr24&list=WL&index=2

Description:

This minimal camera for the Pi Zero (or Pi Zero W, WH, 2W) is perfect for small camera projects where space is at a premium.

The sensor is 5MP, and the whole shebang is mounted on a flexible circuit board. As such, a little care is needed when handling, just like the connector on the Pi Zero. Easy there, Lennie!

Otherwise it's an economical and svelte solution for bird box cameras, body-cams, home security, and simple computer vision projects.

Now with 160 degree wide angle lens

Features

  • 5MP sensor, 2592x1944 pixels (same as version 1 official Pi camera)
  • 1080p video at 30 FPS (or 60 FPS at 720p, 90 FPS at 480p)
  • f2.9 lens, 3.60 mm focal length
  • 53.50 degrees horizontal, 41.41 degrees vertical field of view
  • Approx. dimensions of circuit and camera: 60 x 11.4 x 5.1mm

Notes

  • Only for Raspberry Pi Zero or Zero W with CSI camera port
  • Raspberry Pi Zero not included
What's in the box:

1 x Camera module

Getting started with PiCamera
R329.90  Inc VAT
R359.90
3.3V ADS1115 ADC Module for Raspberry Pi 3/2 / B I2C RPI ADS1115 ADC Analog to Digital Converter (ADS1115 ADC Module for RPi)
Description:

RPi-ADS1115-ADC Module is a precision analog-to-digital converter (ADC), one of them ADS1115 Is able to offer 16Bit sampling accuracy of the chip, using a very small sizeMSOP - 10Package.

Data passed I2C Compatible serial interface for transmission, owned 4 road I2C Address can be selected, work power only need3.3VYou can. Its main function is that it can be used to detect analog signals and convert them to digital signals.

You can put analog signals on joysticks or other analog sensors such as NTC, Temperature, dust sensors and other equipment through this RPi-ADS1115-ADC Module access raspberry faction, through the raspberry dispatch device to collect the analog signal.

parameter

value

size

65.0 mm 30.0 mm 18.0 mm

Operating voltage

3.3V

Analog input voltage

VDD,GND

Programmable data rate

8 sps To 860 sps

internal PGA

stand by

 

Sampling accuracy

16 Bit

I2c interface

Select the address by pin

Number of channels

4 Single-ended or 2
Differential input

Programmable Comparator (PGA)

2/3 ~ 16

internal NTC

R245.90  Inc VAT
XH-M229 Desktop PC Chassis Power ATX Transfer to Adapter Board Power Supply Circuit Outlet Module 24Pin (ATX power supply board)
Description:

Turn your ATX PC power supply into a handy test bench power supply.
  • -12V
  • 12V
  • 5V
  • 3.3V
Each output channel has replaceable 5A fuse and corresponding ground connection with binding post easy to connect
Provide quick access to the typical voltages needed including 3.3V, 5V, 12V and -12V.
The power indicator and power switch easy to control ideal to DIY low voltage power supply for developing physical computing projects (embedded systems)


Specifications:

  • Product name : ATX power supply board 
  • Model : XH - M229 
  • Compatible with port: ATX (compatible with partial BTX type) 
  • The PIN number: 24 pin 
  • Switch : Yes 
  • Number of sets of output : Four sets of different voltages 
  • Size:48mm x 128mm x 30 mm

What's in the box?

1 x Power Chassis
R119.90  Inc VAT
Raspberry Pi4 model B official red/white case (Pi4 official red/white case)

Please note: The Raspberry Pi 4 model B board is not included with the case

Description:

Need to cool your RPi4 down? You might like the official case fan and heatsink add on.

The official Raspberry Pi 4 Model B  case in a stunning red & white design (also available in black & grey)

  • Optional clip-on lid provides protection but can be removed if using a HAT
  • All primary ports (including microSD) accessible
  • Snug and secure fit protects your Pi while looking great!
  • Anti-slip feet keep your Raspberry Pi stable
  • Power and activity lights still visible through the end of the case
  • High-quality, two-part ABS construction
  • Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card.

What's in the box?

1 x Raspberry Pi Official Pi4 Case
R89.90  Inc VAT
Raspberry Pi4 model B official black/grey case (Pi4 official black/grey case)

Please note: The Raspberry Pi 4 model B board is not included with the case

Need to cool your RPi4 down? You might like the official case fan and heatsink add on.

Description:

The official Raspberry Pi 4 Model B  case in a stunning black & grey design (also available in red & white)

  • Optional clip-on lid provides protection but can be removed if using a HAT
  • All primary ports (including microSD) accessible
  • Snug and secure fit protects your Pi while looking great!
  • Anti-slip feet keep your Raspberry Pi stable
  • Power and activity lights still visible through the end of the case

What's in the box:

1 x Raspberry Pi4 model B case
R89.90  Inc VAT
Official White 2m Micro-HDMI to Standard HDMI (type A) for Pi4 and Pi400 (Pi4 off White 2m micro HDMI cable)


Description

Official Raspberry Pi Micro HDMI to HDMI cable, fully licensed by Raspberry Pi and manufactured for the Raspberry Pi 4 Model B and RPi400

Perfect for running a dual screen setup.

Specifications

  • 19-pin HDMI Type D(M) to 19-pin HDMI Type A(M)
  • 2m white cable
  • Nickel-plated plugs
  • 4Kp60 compliant
  • RoHS compliant
  • 3Mohm 300VDC insulation, withstands 300VDC for 0.1s
What's in the box?

1 x 2m micro white hdmi cable
R139.90  Inc VAT
Official White 1m Micro-HDMI to Standard HDMI (type A) for Pi4 (Pi4 off White 1m micro HDMI cable)


Description:

Official Raspberry Pi Micro HDMI to HDMI cable, fully licensed by Raspberry Pi and manufactured for the Raspberry Pi 4 Model B.

Perfect for running a dual screen setup with the new Raspberry Pi 4 Model B.

Specifications:

  • 19-pin HDMI Type D(M) to 19-pin HDMI Type A(M)
  • 1m white cable
  • Nickel-plated plugs
  • 4Kp60 compliant
  • RoHS compliant
  • 3Mohm 300VDC insulation, withstands 300VDC for 0.1s

What's in the box:

1 x  1m Micro-HDMI to Standard HDMI cable

R89.90  Inc VAT
Power cable USB micro-B to USB-C adapter for Pi4 Black (Pi4 USB micro to C black adapter)

Description:

This small adapter allows you to convert an existing micro USB power supply (like the official Raspberry Pi universal power supply for Raspberry Pi 1, 2 and 3) into a USB-C power supply.

Note that when a micro USB power supply is used, the maximum power that can be delivered to the Raspberry Pi 4 will be 12.5W. This means that less power will be available to devices connected to the USB 2.0 and USB 3.0 ports on the Raspberry Pi 4 than when using the new Raspberry Pi 15.3W USB-C power supply.

Specifications:

• Female USB-B to Male USB-C adapter
• Compatible with Raspberry Pi 4 Model B (all variants)
• Carry on using your USB micro-B devices

What's in the box?:

1 x USB micro-B to USB-C adapter

R16.90  Inc VAT
USB micro-B to USB-C adapter for Pi4 White (Pi4 USB micro to C white adapter)


This small adapter allows you to convert an existing micro USB power supply (like the official Raspberry Pi universal power supply for Raspberry Pi 1, 2 and 3) into a USB-C power supply.

Note that when a micro USB power supply is used, the maximum power that can be delivered to the Raspberry Pi 4 will be 12.5W. This means that less power will be available to devices connected to the USB 2.0 and USB 3.0 ports on the Raspberry Pi 4 than when using the new Raspberry Pi 15.3W USB-C power supply.

R16.90  Inc VAT
Pibow Coupé 4 Red case (Raspberry Pi4 only) (Pibow Coupe Pi4 Red)
Description:

Pibow Coupé 4. The slim, hackable, and attractive case for the Raspberry Pi 4! 
Note: This Pibow Coupé is only compatible with the Raspberry Pi 4!

Features

  •     Compatible with Raspberry Pi 4 only
  •     Cutout in lid for 40x30mm heatsink or Fan SHIM
  •     Super-slimline profile
  •     Fully HAT-compatible
  •     Works great with standoffs!
  •     Protects your beloved Pi!
  •     Clear top and base (Ninja and Red) leave Raspberry Pi 4 visible
  •     GPIO cut-out
  •     Handy laser-etched port labels
  •     Leaves all ports accessible
  •     Made from lightweight, high-quality, cast acrylic
  •     Great for hacking and tinkering!
  •     Made in Sheffield, UK


Crafted out of five unique layers including a transparent top and base (Red and Ninja) that leave your beautiful Raspberry Pi 4 visible inside. Each layer is laser-cut from colourful, high-quality, cast acrylic and once stacked they securely contain a Raspberry Pi 4 while leaving the primary ports, including the camera port, display port, and GPIO accessible.

Weighing just over 50 grams, the case is lightweight and ideal for mounting to any surface. No tools are required for assembly or disassembly. The dimensions are: 99x66x15mm (WxLxH, not including bolt heads and nuts).
R179.90  Inc VAT
Pibow Coupé 4 Ninja Black case (Raspberry Pi4 only) (Pibow Coupe Pi4 Black)
Description:

Pibow Coupé 4. The slim, hackable, and attractive case for the Raspberry Pi 4!

Note: This Pibow Coupé is only compatible with the Raspberry Pi 4!

Features

  •     Compatible with Raspberry Pi 4 only
  •     Cutout in lid for 40x30mm heatsink or Fan SHIM
  •     Super-slimline profile
  •     Fully HAT-compatible
  •     Works great with standoffs!
  •     Protects your beloved Pi!
  •     Clear top and base (Ninja and Red) leave Raspberry Pi 4 visible
  •     GPIO cut-out
  •     Handy laser-etched port labels
  •     Leaves all ports accessible
  •     Made from lightweight, high-quality, cast acrylic
  •     Great for hacking and tinkering!
  •     Made in Sheffield, UK


Crafted out of five unique layers including a transparent top and base (Red and Ninja) that leave your beautiful Raspberry Pi 4 visible inside. Each layer is laser-cut from colourful, high-quality, cast acrylic and once stacked they securely contain a Raspberry Pi 4 while leaving the primary ports, including the camera port, display port, and GPIO accessible.

Weighing just over 50 grams, the case is lightweight and ideal for mounting to any surface. No tools are required for assembly or disassembly. The dimensions are: 99x66x15mm (WxLxH, not including bolt heads and nuts).
R169.90  Inc VAT
Per Page      161 - 180 of 418