Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
The Official Raspberry Pi Power Supply - Shipped with easily interchangeable heads for the UK and EU.
R149.90  Inc VAT
UBEC's (Universal Battery Eliminator Circuit's) are simply DC to DC step down voltage regulators! This UBEC is perfect for the Raspberry Pi, as it's able to take high voltages (5.5V up to 26V), and outputs a consistent safe voltage of 5V at up to 3A nominal or 5A max!
R79.90  Inc VAT
500W Spindle motor with chuck, power supply and speed controller for CNC.
R1,899.90  Inc VAT
Add a tiny yet convenient power switch to your Pi with OnOff SHIM!
R109.90  Inc VAT
Raspberry Pi4 Official USB-C 15.3W power supply Black 5.1V 3A (Pi4 3A power black)
The official Raspberry Pi USB-C power supply is designed to power the latest Raspberry Pi 4 Model B computers, which were released in June 2019.
Featuring a captive USB-C cable, the power supply is available in four different models to suit different international power sockets, and in two colours, white and black.

Specifications

Output
  • Output voltage: +5.1V DC
  • Minimum load current: 0A
  • Nominal load current: 3.0A
  • Maximum power: 15.3W
  • Load regulation: ±5%
  • Line regulation: ±2%
  • Ripple & noise: 120mVp-p
  • Rise time: 100ms maximum to regulation limits for DC outputs
  • Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
  • Protection: Short circuit protection, Overcurrent protection, Over temperature protection
  • Efficiency: 81% minimum (output current from 100%,75%, 50%, 25%)72% minimum at 10% load
  • Output cable: 1.5m 18AWG
  • Output connector: USB Type-C


Input
  • Voltage range: 100-240Vac (rated)
  • 96-264Vac (operating)
  • Frequency: 50/60Hz ±3Hz
  • Current: 0.5A maximum
  • Power consumption (no load): 0.075W maximum
  • Inrush current: No damage shall occur and the input fuse shall not blow
Case material
UL94V-1

AC pin material
Brass (NI plated)

WARNINGS
• This product should be operated in a well-ventilated environment.
• The connection of incompatible devices to this power supply may affect compliance, result in damage to the unit and invalidate the warranty.

SAFETY INSTRUCTIONS
To avoid malfunction or damage to this product please observe the following:
• Do not expose to water or moisture, or place on a conductive surface whilst in operation.
• Do not expose to heat from any source; this is designed for reliable operation at normal ambient room temperatures.
• Do not attempt to open or remove the power supply case.
R109.90  Inc VAT
Raspberry Pi4 Official USB-C 15.3W power supply White 5.1V 3A (Pi4 3A power white)
The official Raspberry Pi USB-C power supply is designed to power the latest Raspberry Pi 4 Model B computers, which were released in June 2019.
Featuring a captive USB-C cable, the power supply is available in four different models to suit different international power sockets, and in two colours, white and black.

Specifications

Output
  • Output voltage: +5.1V DC
  • Minimum load current: 0A
  • Nominal load current: 3.0A
  • Maximum power: 15.3W
  • Load regulation: ±5%
  • Line regulation: ±2%
  • Ripple & noise: 120mVp-p
  • Rise time: 100ms maximum to regulation limits for DC outputs
  • Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
  • Protection: Short circuit protection, Overcurrent protection, Over temperature protection
  • Efficiency: 81% minimum (output current from 100%,75%, 50%, 25%)72% minimum at 10% load
  • Output cable: 1.5m 18AWG
  • Output connector: USB Type-C


Input
  • Voltage range: 100-240Vac (rated)
  • 96-264Vac (operating)
  • Frequency: 50/60Hz ±3Hz
  • Current: 0.5A maximum
  • Power consumption (no load): 0.075W maximum
  • Inrush current: No damage shall occur and the input fuse shall not blow
Case material
UL94V-1

AC pin material
Brass (NI plated)

WARNINGS
• This product should be operated in a well-ventilated environment.
• The connection of incompatible devices to this power supply may affect compliance, result in damage to the unit and invalidate the warranty.

SAFETY INSTRUCTIONS
To avoid malfunction or damage to this product please observe the following:
• Do not expose to water or moisture, or place on a conductive surface whilst in operation.
• Do not expose to heat from any source; this is designed for reliable operation at normal ambient room temperatures.
• Do not attempt to open or remove the power supply case.
R109.90  Inc VAT
Raspberry Pi Official Pi3 Micro USB Universal Power Supply 5.1V 2.5A (White) (AW Pi3 Power 2.5A White)

You'll need a USB Type C adapter to use this supply for Pi 4

The Official Raspberry Pi Power Supply - 
Shipped with easily interchangeable heads for the UK, US, EU and Australia you can now use your Pi in all four corners of the world! 

This PSU supports up to 2.5A of current, so it won't let you down when powering hungry devices through your Raspberry Pi 3 Model B

Technical Data

  • 5.1V 2.5A Output
  • 1.5m Cable
  • White with Raspberry Pi Logo
  • Input Voltage AC Max: 264V
  • Input Voltage AC Min: 90V
  • Output Connector: USB Micro
  • Output Voltage Nom.: 5.1V
  • Interchangeable Adaptor - EU/UK/US/AUS

    The below is a copy from https://www.raspberrypi.org/help/faqs/#powerReqs.

    Here is a table comparing the amount of power drawn in amps under different situations:

      Pi1 (B+)Pi2 BPi3 B (Amps)Zero (Amps)
    BootMax0.260.400.750.20
     Avg0.220.220.350.15
    IdleAvg0.200.220.300.10
    Video playback (H.264)Max0.300.360.550.23
     Avg0.220.280.330.16
    StressMax0.350.821.340.35
     Avg0.320.750.850.23
    Test conditions used a standard Raspbian image (current as of 26 Feb 2016),
     
The Official Raspberry Pi Power Supply - Shipped with easily interchangeable heads for the UK and EU.
R149.90  Inc VAT
1A / 2.1A Dual USB Car Cigarette Lighter Charger - Black (12V) (C8 car charger dual)
Color Black
Material ABS
Power Supply Car Cigarette Lighter Plug
Compatible Models Mobile phones, tablet PC etc.
Input Voltage 12 V
Output Voltage 5V
Output Current 1000, 2100 mA
Features Dual USB output can charge two devices at the same time
Packing List 1 x Car charger
R70.61  Inc VAT
1.5m USB A to micro B cable with Switch Black (AW C6 USB Switch cable 1.5m)

Description:

  1. With switch ON/OFF, easy to turn on or turn off
  2. USB / Micro USB interface
  3. Perfectly matched to Raspberry PI or Banana Pi
  4. Wire is made of copper with PVC insulation

Specifications:

  • Length: 150cm
  • Wire size: 3.4mm in diameter
  • Net weight: 40g

Notes: The product is used to supply power for Raspberry PI and Banana PI, it can not be used for data transmission.

Contents:

  • 1 x Switch power supply cable
R69.90  Inc VAT
MB102 Breadboard Power Supply Module (BB power supply)
ModelI061806
Quantity1
ColorBlack
MaterialPCB
FeaturesInput voltage: 6.5~12 V (DC) or USB power supply; Output voltage: 3.3V / 5V switchable; Maximum output current: <700 mA; Two ways individual control: 0V / 3.3V switchable
ApplicationSuitable for MB102 breadboard
OtherFor Arduino/Raspberry Pi/Electronic DIY projects
Packing List1 x Power supply module

Dimensions: 2.09 in x 1.26 in x 0.39 in (53 mm x 32 mm x 10 mm)
Weight: 1.62 oz (46 g)

Quick video available on a similar MB-102 power supply at https://www.youtube.com/watch?v=ZpCep1jL-iA


R24.90  Inc VAT
Hobbywing 5V 3A UBEC Step-Down Converter (3C3 Hobbywing power converter)

UBEC's (Universal Battery Eliminator Circuit's) are simply DC to DC step down voltage regulators! This UBEC is perfect for the Raspberry Pi, as it's able to take high voltages (5.5V up to 26V), and outputs a consistent safe voltage of 5V at up to 3A nominal or 5A max! The Hobbywing 5V 3A UBEC is a switch-mode type, which results in it being much more efficient than linear type UBEC's (so your batteries will last longer!)

UBEC's are perfect for applications where you plan to use the Raspberry Pi in a circuit with high voltages such as robots where you'll be driving motors!

Due to the voltage drop caused by the Raspberry Pi, it is recommended to input a minimum of 6.5V to receive a stable 5V output. Anything lower than 6.5V will result in a low voltage warning on the Pi.

Please Note. The Hobbywing UBEC can be set to output either 5V or 6V using an onboard jumper select! Please DOUBLE CHECK your output voltage is correct before connecting your microcontroller or circuit! 

Features

  • Designed with an advanced switch mode DC-DC regulator IC.
  • Battery polarity reversal protection.
  • A metal shield covers almost all the electronic components, and a specially made filter is attached to the output wires to significantly reduce the electromagnetic interference.
  • The working status is shown by an indicator (LED), which lights when the output is in normal range.
  • Output Voltage: [email protected] or [email protected] (Changeable with an output-voltage select jumper)
  • Continuous output current: 3 Amps
  • Maximum output current: 5 Amps
  • Input: 5.5V - 26V (2 - 6 cells lithium battery pack or 5 - 18 cells NiMH /NiCd battery)
  • Size: 43mm*17mm*7mm (L*W*H)
  • Weight: 11g

Check out our tutorial here: https://www.modmypi.com/blog/using-a-ubec-with-a-raspberry-pi

UBEC's (Universal Battery Eliminator Circuit's) are simply DC to DC step down voltage regulators! This UBEC is perfect for the Raspberry Pi, as it's able to take high voltages (5.5V up to 26V), and outputs a consistent safe voltage of 5V at up to 3A nominal or 5A max!
R79.90  Inc VAT
830 Solderless Breadboard + Power Supply + Jumper Cable Kit (1A2 Powered Breadboard kit)
Quick video available on a similar MB-102 power supply at https://www.youtube.com/watch?v=ZpCep1jL-iA

Dimension: 16.7 x 5.7 x 1cm
Tie Points: 830 tie points (consists of: 630 tie-point terminal strips, 200 tie-point distribution strips)
Matrix: 126 separate 5 point terminals, plus 4 horizontal bus lines (Power Lines) of 50 test points each
Jumper size: Suitable for 20~29 AWG (0.3mm ~ 0.8mm) wires

MB-102 Power Supply Module:

Input voltage: 6.5V ~ 12 V DC / USB power supply
Output voltage: 3.3V / 5V select with jumpers
Maximum output current: <700mA
Fluctuation two road independent control, can switch over to 0V, 3.3V, 5V
On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use
Size: 5.3 x 3.2 x 2.5cm

Jumper Cables:

Breadboard jumper cable male to male
Typically used for electronics projects
Wires are flexible, durable, reusable, easy to trace
Easy to connect and disconnect

Kit includes:

1 x 830 tie point Solderless Breadboard
1 x MB-102 Breadboard Power Supply
65 x Breadboard Jumper Cables male to male
R109.90  Inc VAT
DEDICATED POWER CORD 3PIN TO 1 IEC 2M (power kettle x1 cable)

Standard Single Head Power Cable-1.8m-Standard computer power cable with 3-prong plug on one end and kettle plug connection on the other., OEM, No Warranty

Product Overview
Standard 3 prong South African Plug 16Amp fuse plug on one end and the IEC (kettle plug) connection on the other. Plugs directly into computers, certain monitors and various power supply units. Also known as Power Cord (Kettle Cord) 3 Pin South African, One IEC Connector, 1.8 Meters
 
Specifications
• Connects a PC to a 220 volt AC power outlet
• Single CIEC standard compliant moulded PC power plug
• Can be used on standard domestic 3 pin AC power outlets
• 220 Watt rating for SLI and multi-rail power supply use
• 1.8metre Long
R43.90  Inc VAT
AData PT100 Black 10000mAH Powerbank (C5 Adata Bank 10000 )
Features
• Portable Easy-Grip Design
A streamlined easy-grip design allows you to carry the AData PT100 easily while charging.
 
 


• Worry-Free,  Continuous Charging
No need to worry about running out of power when you're on the go! The AData PT100 comes with a whopping 10000mAh charge capacity – enough for up to 5 full charges for an iPhone 5, and 1.5 charges for an iPad Mini.
 

 
• Auto On-Off
Whenever you connect your device to the PT100, it automatically begins charging without needing to press a button. When charging finishes, the AData PT100 automatically shuts off.

• 4-Mode LED Lighting

ADATA's PT100 Power Bank also works as an LED flashlight with 4 lighting modes. Just press and hold a button for 2 seconds to turn on the built-in flashlight. Press the button quickly to switch between flashlight modes. Whenever you need to use your PT100, it remembers which mode you last used.
 

• LED Power Level Display
An LED power level indicator shows how much power remains in the PT100.
 
.
Specifications
• Capacity 10000mAh
• Colour-Black/Green
• Battery Li-ion (18650)
• Weight  285g / 10oz
• Input  DC 5V / 2A (Micro USB)
• DC 5V / 1A (Type-A USB)
• DC 5V / 2.1A (Type-A USB)
• Operating Temperature 0°C ~40°C
• Dimensions (L x W x H) 140 x 63 x 21.5mm
R279.90  Inc VAT
DC 9V Battery Button Power Cable Tieline For Arduino (C52 9VDC Batt arduino power clip)
Description:

This is a DC 9V Battery Button Power Cable Tieline For Arduino
Plug on the outside is negative

Package includeds:

1 x DC 9V Battery Button Power Cable 
R11.90  Inc VAT
USB To RS232 TTL PL2303HX Cable Adapter Module Converter (2C4 USB split to jumper Female)
USB TO RS232 TTL PL2303HX Auto Converter Module Adapter 5V Output, provides the best and convenient way to connect your RS232 TTL devices or DEMO board to your computer via the usb port.

Specification:

Built-in TTL COM PC-PL2303HX Chip
Standard USB type A male and TTL 4 pin connector
Cable length: 1000mm (39 3/8 in)
Simple and Easy way to give USB support to your projects
Black cable-----GND
Green cable----TXD
White cable----RXD
Red cable ---- VCC (5V)

Package includes:

1 x USB to RS232/TTL PL2303HX cable adapter module
R45.90  Inc VAT
Pair Male Female 12V DC Power Plug Jack Adapter Connector for CCTV (1D4 male female cctv connector)
Description:
Simple & Professional appearance for power cabling
Easier for camera installation, save time and more securer cable connection
5.5mm x 2.1mm Female power plug connector
Clearly marked positive and negative to avoid reversal.


Package Includes:

1 x Pair Male Female 12V DC Power Plug Jack Adapter Connector
R18.90  Inc VAT
5.5 x 2.1mm DC Power Male Jack Plug Connector(1 unit) (1D4 male connector (1unit) cctv)
Specifications :

Connector Type:Male Plug
Material(External):PVC Plastic
Color: Black + Green
Size:2.1 x 5.5 mm
Internal diameter of the plug: 2.1mm
External diameter of the plug: 5.5mm

Package includes :

1 x  DC Power Male Jack Plug Connector
R8.90  Inc VAT
Machifit ER11 Chuck CNC 500W Spindle Motor with 52mm Clamp and Power Supply Speed Governor (3D2 500w spindle motor kit)
It only can be used in AC220V±10% 50/60Hz, not110V.

Here are the links of  the CE Certification and the Environmental Certification:

CE Certification: 

https://www.dropbox.com/s/x937yu696g449o2/CE%20Certification%20.pdf?dl=0

Environmental Certification: 
https://www.dropbox.com/s/38ncgzktlsxlhvw/Environmental%20Certification%20.pdf?dl=0

Specifications:
Brand: Machifit
Dimensions140mm×110mm×48mm (L*W*H)
InputAC220V±10% 50/60Hz
Spindle Motor500w
Spindle Speed3000-12000r/min
Motor Diameter52mm
Motor Length208mm
Operating Voltage100V DC
Current6A
SpeedUp to idle up to 15,000 rev / min
Torque5000G/CM
Insulation Resistance> 2 megohms
Dielectric Strength400V
High precision spindle runout 0.01-0.03

Chuck size:
Style: ER11
Material: High Grade 45 Carbon Steel
Total height: 18mm
Outer diameter(Max.): 11.5mm
Gripping Range: 3mm
Small diameter: 7.8mm
Fits metric shank size(s): 3mm metric shank

Nut Size: 
Inner Diameter: 8.7mm
Height: 13mm
Hex Diameter: 17mm
Outer Diameter:19mm

The Usage of "Don't pipe":
Its function is to inhibit the switched source. If they are open, the source does not give tension. 
If the short circuits, for example with a relay, the source generates the voltage to which it is regulated with the potentiometer.
There will be no problem in controlling the motor using these pins.
 
Package Includes:
1 x 500W Spindle Motor
1 x Power Supply
1 x 52MM Mount Bracket
1 X ER11 Collect
4 x Screws
500W Spindle motor with chuck, power supply and speed controller for CNC.
R1,899.90  Inc VAT
3 in 1 Fuse Power Supply Socket (2B4 3in1fuse power socket)
Specifications:
Voltage:10A AC250V
Contact Resistance:≤0.03Ω
Withstand voltage:AC 1500V(50hz)/min
Insulation Resistance:≥100MΩ
Insertion and Extrartion Force:3-20N
Dielectric intensity:≥2000V AC/min
Temperature:-40℃ to 70℃
Color:Black

Package includes:
1x power supply socket
R54.90  Inc VAT
6 x AA Battery Holder with DC2.1 Power Jack for Arduino (2B6 battery holder 6xAA)
Description:

Holds 6 x AA batteries (not included) which can do 7.2 V rechargeable battery pack from NiMH / NiCd cells or 9V battery pack from alkaline cells
Power supply for dc projects.
With DC05 power supply jack
Cable Length: 12cm

Specifications:

Voltage: 9V
Material: Plastic
Power: 6 x 1.5V AA batteries
Color: Black
Net weight: 25g

Package includes:

1x Battery case with DC2.1 power jack
R28.75  Inc VAT
OnOff SHIM (3A4 On/Off Shim)

Our SHIMs (Shove Hardware in the Middle) are a new range of boards designed to be small, affordable, and handy. They're just 1mm thick (the bare board, not including mounted components) and designed to be soldered straight onto the GPIO pins of your Pi, if you wish, so that you can use them with HATs and pHATs on top.

Usage

Just plug your micro-USB power supply into the micro-B connector on OnOff SHIM, and then press the button once to switch on power and boot up your Pi. After installing our software (details below), you can press the button again to initiate a clean shutdown and completely cut the power to your Pi.

Features

  • super-small SHIM-format board
  • 1mm thick PCB
  • can be used with HATs and pHATs
  • corner-mounted push button for on/off
  • micro-B connector for power supply
  • red status LED
  • optional breakout pins to connect an external momentary button
  • 2x6 female header included
  • software daemon to shutdown cleanly
  • requires soldering

Software

We've put together a one-line-installer to install the clean shutdown daemon. It watches the state of BCM pin 17 and, when pulled low (pressed), it initiates a clean shutdown. Last thing, just before your Pi shuts down, BCM pin 4 is pulled low to completely cut power to your Pi.

To install the software, open a terminal and type curl https://get.pimoroni.com/onoffshim | bash to run the one-line-installer.

Add a tiny yet convenient power switch to your Pi with OnOff SHIM!
R109.90  Inc VAT
Dual USB Output 6-24V To 5.2V 3A DC-DC Step Down Power Converter (C5 Dual USB 3A green step down)
Specifications:

1.Model:usb1002
2.Name: Power Module
3.Features: Buck Charge
4.Product size: 33mm x 33mm x 8mm
5.Input voltage range: 6-24V
6.Output voltage: 5.2V (the output terminal is 5.3-5.4V, the load side is 5.1-5.2V)
7.Output Current: 3A (without heat sink, the stability of the output current is 2A)

Note:

1. Input voltage can not exceed 24V, otherwise, it will cause damage to the device!
2. The input positive and negative can not be reversed, otherwise it will cause damage to the device!

Package Includes:

1 x Dual USB Power Module
R39.90  Inc VAT
9V 1A AC to DC Power Supply for Arduino (C51 power 9V arduino)
Specifications
Input Voltage 100V ~ 240V AC
Output Voltage 9V DC
Max. Output Current 1000mA
Working Temperature -10 ~ + 50℃
English Manual / Spec No
Other Features
Other Features 1.AC input voltage range : 100V ~ 240V; 2.Output DC voltage : 9V; 3.Output current : 1000mA; 4.Aging test : 100% load aging; 5.Working temperature : -10 ~ + 50'C; 6.Storage temperature : -20+85'C; 7.Power input frequency : 50/60Hz.
Dimensions & Weight
Dimensions 2.87 in x 1.57 in x 1.02 in (7.3 cm x 4 cm x 2.6 cm)
Weight 2.5 oz (71 g)
R89.90  Inc VAT
Per Page      1 - 20 of 102