Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
Use this HAT to power a Raspberry Pi 3 B+ and Pi 4 via an Ethernet cable, removing the need for a separate power supply! An ideal solution for embedded and IoT projects.
R409.90  Inc VAT
UNO R3 MEGA328P ATMEGA16U2 for Arduino Compatible (Uno Board DIP IC)

Arduino is an open-source electronics platform based on easy-to-use hardware and software. Arduino boards are able to read inputs - light on a sensor, a finger on a button, or a Twitter message - and turn it into an output - activating a motor, turning on an LED, publishing something online.

Find more info on Arduino at https://www.arduino.cc/en/guide/introduction

Description:

 Microcontroller ATmega328
Operating Voltage 5V
Input Voltage (recommended) 7-12V
Input Voltage (limits) 6-20V
Digital I/O Pins 14 (of which 6 provide PWM output)
Analog Input Pins 6
DC Current per I/O Pin 40 mA
DC Current for 3.3V Pin 50 mA
Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader
SRAM 2 KB (ATmega328)
EEPROM 1 KB (ATmega328)
Clock Speed 16 MHz
Length 68.6 mm
Width 53.4 mm

Package includes:

1 x UNO R3
1 x USB cable


R129.90  Inc VAT
Geekcreit® MEGA 2560 R3 ATmega2560-16AU MEGA2560 Development Board With USB Cable (Arduino Mega)
Description:

Arduino compatible R3 Mega2560 ATmega2560-16AU control board with USB cable
Arduino Mega is an ATmega2560 core microcontroller development board. Itself has 54 digital input/output terminals (14 PWM outputs), 16 simulation inputs, 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator. With the bootloader, download the program directly via USB without having to go through other external writers. Supply part of the optional USB power, or external power using a AC-to-DC adapter and battery.
Rapid growth due to open original code, as well as the concept of using Java (cross-platform) C language development environment for Arduino module. The Arduino can easily use the Arduino language with Flash or Processing ... software communication, to make multimedia interactive works. Arduino development IDE interface is based on open-source principles, allows you to download for use in projects.
Power supply design:
There are two options for the power supply system of the Arduino Mega. USB direct power supply or external power supply. The power supply will be switched automatically. External supply AC-to-DC adapter or the battery can be selected on this control panel. Limit the voltage range of 6V ~~ 12V, but if the voltage supplied is less than 6V, I / O port may not be supplied to a voltage of 5V, and therefore not stable; If the voltage is greater than 12V, the regulator device may possibly overheat and damage the Arduino MEGA. It is therefore recommended that for the operating supply of 6.5 ~ 12V, the recommended power supply is 7.5V or 9V.
The development board have been rigorously tested at the factory.

Specification:

Microcontroller: ATmega2560
Operating voltage: 5V
Input voltage (recommended): 7-12V
Digital I/O pins: 54 (of which 14 provide PWM output)
Analog input pins: 16
DC current per I/O pin: 40 mA
DC current for 3.3V Pin: 50 mA
Flash Memory: 256 KB of which 4 KB is used by the bootloader
SRAM: 8 KB
EEPROM: 4 KB
Clock Speed: 16MHz


Getting started with Arduino products

Package includes:

  1 x Control board
  1 x USB cable
R299.90  Inc VAT
Mega2560 + WiFi R3 ATmega2560+ESP8266 32Mb memory USB-TTL CH340G. Compatible for Arduino Mega NodeMCU For WeMos ESP8266 (Mega2560 + wifi)

Features:

Full integration on one board: Mega R3 ATmega2560 and WiFi ESP8266 with memory 32Mb (megabyte)
All of the modules can work together or each separately. And everyone has their own pinout headers
The convenient solution for the development of new projects requiring Uno and WiFi
Via USB you can update sketches and firmvare for ATmega2560 and for ESP8266. For this on board have the USB-serial converter CH340G
Use this board is very simple
The board has DIP-switch, to connect the modules
For example, to: USB and ATmeg2560, USB and ESP8266, ATmega2560 and ESP8266
 
Table DIP- Switch:
 
Connection                                                                                       DIP
ATmega2560<->ESP8266 
1            2           3             4           5             6              7
ON         ON        OFF       OFF          OFF        OFF          OFF
USB <->ATmega2560                               
OFF        OFF       ON        ON         OFF        OFF          OFF
USB<->ESP8266 (Update firmware or sketch)
OFF        OFF       OFF       OFF        ON         ON           ON
USB<->ESP8266 (communication)           
OFF        OFF       OFF       OFF        ON         ON           OFF
All independent                                       
OFF        OFF       OFF       OFF        OFF        OFF          OFF
 
Special solution:
USB <->ATmega328<-> ESP8266
                                                                                       DIP                                        SWITH 2
Connection                                        1       2       3      4      5         6           7
 
USB <-> ATmega2560<-> ESP8266    ON    ON    ON      ON   OFF    OFF      OFF          To RXD3/TXD3
 
 
USB converter CH340G connect to RX0/TX0 of ATmega2560
ESP8266 connect to RX3/TX3 of ATmega2560

Documents

Dimensional drawing

Dimensions MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USBDimensions MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USB

Pinout

Pinout MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USBPinout MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USB

Schematic

Schematic of MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USB

Drivers

Windows driver for MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USBLinux driver for MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USBMac OS driver for MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USBAndroid driver for MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USB

 
Package Contents:
1 x Mega + WiFi Board
R329.90  Inc VAT
Geekcreit® UNO R3 Starter Kit (Uno Starter kit)

Type: No battery version

Features:


This is a upgraded version UNO R3 starter kit with more components
You'll learn through building several creative projects.
Starting from the basics of electronics to more complex projects, the kit will help you control the physical world with sensors and actuators.

Package includes:

1 x Arduino compatible UNO R3 development board
1 x USB cable
1 x Prototype extension board
1 x Mini breadboard
1 x 5V stepper motor
1 x 2003 stepper motor driver board
10 x Red LED
10 x Green LED
10 x Blue LED
2 x Vibration Sensors
1 x Flame sensor
1 x LM35 temperature sensor
1 x Infrared receiver (no battery included)
3 x Photoresistors
4 x Key caps
4 x Key switches
1 x Adjustable potentiometer
1 x Passive buzzer (piezo buzzer)
1 x Active buzzer (tone generator)
1 x Jumper cap
1 x Large breadboard
1 x Remote Control
1 x 1602 screen
1 x 9G servo
1 x 10p DuPont jumpers
30 x Breadboard jumpers(approximately)
1 x 220 ohm resistor
1 x 8*8 dot matrix
1 x One digit eight segment tube
1 x Four digit eight segment tube
1 x IC 74HC595
1 x Battery Holder
1 x 1K resistor plug
1 x 10K resistor plug
1 x 2.54mm 40pin pin header

We found some beginners guides that will help show you what the kit can do and get you started with your own tinkering.

Makerspace.com - https://www.makerspaces.com/simple-arduino-projects-beginners/
Starter kit for Arduino - https://www.elecrow.com/download/Starter%20Kit%20for%20Arduino(user%20manual).pdf

 

R599.90  Inc VAT
Raspberry Pi Power over Ethernet (PoE) HAT R3 (RPi POE hat)

Getting started

The Raspberry Pi Power over Ethernet HAT is a small accessory for the Raspberry Pi computer. It can only be used with the Raspberry Pi 4 Model B (launched June 2019) and the Raspberry Pi 3 Model B+ (launched March 2018). The PoE HAT allows you to power your Raspberry Pi using Power over Ethernet–enabled networks; for this product to be used, the network it is connected to needs to have power-sourcing equipment installed.

Supplied with this product

  • Raspberry Pi PoE HAT
  • Mechanical spacers

Other hardware needed

  • A Raspberry Pi 4 Model B or Raspberry Pi 3 Model B+
  • An Ethernet cable
  • Power-sourcing equipment for a 802.3af Power over Ethernet network

Connecting your PoE HAT to the Raspberry Pi

  • Before installing the PoE HAT, you must attach the supplied spacers in the four corners of the board
  • Then connect the Raspberry Pi PoE HAT to the two 0.1” headers (40 + 4) that are fitted on the Raspberry Pi
  • Once the PoE HAT board is connected, you can power the Raspberry Pi through its RJ45 network connector

Disconnecting your PoE HAT

  • Take care when separating the HAT from the Pi
  • Pull evenly so that it detaches from all the pins at the same rate; do not pull one end of the connector off before the other

Additional information

No modification to the main Raspberry Pi board is needed for this product to work. Please ensure that your Raspberry Pi’s software is up to date for all functionality to be available. The PoE HAT is fitted with a small fan that is controlled by the Raspberry Pi via I2C. The fan will turn on and off automatically depending on the temperature of the main processor on the Raspberry Pi.

Specification

The Raspberry Pi PoE HAT is an add-on board for the Raspberry Pi 4 Model B and the Raspberry Pi 3 Model B+. It allows the Raspberry Pi to be powered via a power-enabled Ethernet network.

  • 802.3af PoE
  • Fully isolated switched-mode power supply
  • 37–57V DC, Class 2 device
  • 5V/2.5A DC output
  • 25mm x 25mm brushless fan for processor cooling
  • Fan control

Safety

IMPORTANT: PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE.

Warnings

This product:

  • Shall only be powered using 802.3af-compliant power sourcing equipment; any external power supply used with the Raspberry Pi shall comply with relevant regulations and standards applicable in the country of intended use
  • Should be operated in a well-ventilated environment, and should not be covered
  • Should be placed on a stable, flat, non-conductive surface while in use, and should not be contacted by conductive items

Instructions for safe use

To avoid malfunction or damage to your Raspberry Pi product, please observe the following advice:

  • Do not block or obstruct the fan
  • Do not insert anything into the fan at any time
  • Do not expose the product to water or moisture, and do not place it on a conductive surface whilst it is in operation
  • Do not expose it to heat from any source; the product is designed for reliable operation at normal room temperatures
  • Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board and connectors
  • Avoid handling the Raspberry Pi while it is connected to a power outlet; only handle by the edges to minimize the risk of electrostatic discharge damage
  • All other peripherals used with the Raspberry Pi should comply with relevant standards for the country of use and be marked accordingly to ensure that safety and performance requirements are met; these peripherals include, but are not limited to, keyboards, monitors, and mice used in conjunction with the Raspberry Pi

Compliance

The Raspberry Pi PoE HAT has undergone extensive compliance testing, and meets the following European standards:

  • Electromagnetic Compatibility Directive (EMC) 2014/30/EU
  • Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU

For all compliance certificates and numbers, please visit www.raspberrypi.org/compliance.


Use this HAT to power a Raspberry Pi 3 B+ and Pi 4 via an Ethernet cable, removing the need for a separate power supply! An ideal solution for embedded and IoT projects.
R409.90  Inc VAT
Transparent Acrylic Case For Arduino MEGA2560 R3 Module Board(Arduino is not included) (Mega Acrylic case)
Feature:

Name: Arduino MEGA2560 R3 DIY acrylic case
Dimensions: 118 x 72 x 18mm
Weight: 72g
Material: A level acrylic
For Arduino MEGA2560 R3 Development Board only

Please Note:
Arduino Mega is not included.
Don't forget to remove the protective film from the acrylic parts.

Package includes:

1 x Transparent Acrylic case
R49.90  Inc VAT
Double sided DIY PCB Prototype Screw Terminal Block Shield Board Kit For Mega2560 R3 (Mega breakout board)
Description:
 
Prototype Screw/Terminal Block Shield Board Kit For Arduino MEGA-2560 R3
The Kit includes Prototype PCB, Terminal Blocks, Female Header Sockets

Unassembled, soldering required.

PCB:
 
FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm
Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm
Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm

Terminal Blocks:

Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs )
Wire range 26~16AWG, strip length 5mm, screws M2 steel, pin header and cage brass

Female Header Sockets:

Pitch 0.1"/2.54mm, pin length 15mm / 0.59"
Single row 10pin x1pcs, single row 8pin x 5pcs, dual row 18pin x1pcs

Package includes:

1 x Double-side PCB Prototype Screw Terminal Block Shield Board Kit
R249.90  Inc VAT
MPPT Solar Regulator 12/24 V, Tracer A 30A, Input 100V (Tracer3210A) (EPEVER MPPT solar charger)
Tracer A series adopts positive design with LCD and advanced MPPT control algorithm with 99.5% efficiency. The products can track the MPP point fast and accurately in any situation which will improve energy efficiency and obtain the maximum solar energy.

The original solar controller made by EPsolar for GWL/Power.

Features:

  • Advanced MPPT technology
  • High tracking efficiency no less than 99.5%
  • Peak conversion efficiency of 98%
  • Ultra-fast tracking speed
  • Accurately recognizing and tracking of multiple power point
  • Multi-function LCD displays system information intuitively
  • User programmable for battery types, load control etc.
  • 3-Stage charge with PWM output
  • Common positive grounding design
  • RS485 port with industrial standard MODBUS open architecture
  • Fully programmable function via PC software or remote meter

Electronic protections:
  • PV reverse polarity protection
  • PV short circuit protection
  • PV over current alarm protection
  • Battery overcharge protection
  • Battery over discharge protection
  • Battery reverse polarity protection
  • Load short circuit protection
  • Load overload protection
  • Controller overheating protection

MPPT function is a smart tracking algorithm that maximizes the energy from the solar PV module(s) and charge the battery. Solar Controler also control of low voltage disconnect function (LVD) will prevent the battery damage from battery over discharging.

Wiring and working of controller

Please NOTE: In case of using LiFePO4 batteries is recommended to check the status of voltage during charging and discharging with another external electronics.

Advance features:

  • Support for LiFePO4 and LiFeYPO4 batteries was tested successfully
  • Auto recognition of 12 / 24V system.
  • Innovative Maximum Power Point Tracking technology to optimize using the solar system.
  • Function of automatic recognize day/night.
  • Dual Timer function with 1-15 hours option for street lights
  • Support for Sealed, Gel and Flooded battery option of LiFePO4 battery
  • Temperature sensor and output for external temperature sensor
  • Electronic protection: over charging, over discharging, overload, short circuit.
  • Reverse protection: any combination of solar module and battery.

Included USB monitoring cable

This MPPT regulator can be monitored using a PC with WINDOWS. Check the Solar Controller Monitor for Tracer series (RS-485/USB) to learn about a simple way to monitor and store the log of the charging and discharging history.


Remote Battery Temperature sensor included





Parameters



Max. power (W)720
Weight (kg)1,2
Max output current (A)30
Height (mm)228
Width (mm)164
Depth (mm)55
Nominal Voltage (V)12/24
Max. input voltage (V)100
TechnologyMPPT


Documents

190201_Regulator_Tracer_A_30A_REG-TR3210A_A4.pdf

tracerA-manual.pdf


R2,899.90  Inc VAT
LCD module 3.5 inch TFT LCD display for Arduino UNO R3 Board and supports mega 2560 R3 (Arduino LCD display 3.5inch)
PLEASE NOTE: Arduino board and USB cable are not included

LCD module 3.5 inch TFT LCD screen 3.5 " for Arduino UNO R3 Board and support mega 2560 R3



Watch a video on this item at https://www.youtube.com/watch?v=PAPW97X6IRM
 


Package Includes:
 
 1 x 3.5 inch TFT LCD

View the Wiki pages
R229.90  Inc VAT
ABS Blocks Case Red for UNO R3 (Red Uno blocks case)

Features :

 

1. The cases can be stacked.

2. Made of high quality ABS plastic , provides good protection.

3. Available in red ,blue  and white.

4. Can be wall mounted.

5. Designed for UNO R3.

 

 

Specifications :

 

1. Material : ABS

2. Weight : 30 g approx

3. Size ( L x W x H ) : 80 x 60 x 20 mm approx

4. Colours : Red , Blue and White(See related products tab)

 

 

Package Includes :

1 x ABS Case for UNO R3

R99.90  Inc VAT
ABS Blocks Case Blue for UNO R3 (Blue Uno blocks case)

Features :

 

1. The cases can be stacked.

2. Made of high quality ABS plastic , provides good protection.

3. Available in red ,blue  and white.(See related products tab)

4. Can be wall mounted.

5. Designed for UNO R3.

 

 

Specifications :

 

1. Material : ABS

2. Weight : 30 g approx

3. Size ( L x W x H ) : 80 x 60 x 20 mm approx

4. Colours : Red , Blue and White

 

 

Package Includes :

1 x ABS Case for UNO R3

R89.90  Inc VAT
ABS Blocks Case White for UNO R3 (White Uno blocks case)

Features :

 

1. The cases can be stacked.

2. Made of high quality ABS plastic , provides good protection.

3. Available in red ,blue  and white.(See related products tab)

4. Can be wall mounted.

5. Designed for UNO R3.

 

 

Specifications :

 

1. Material : ABS

2. Weight : 30 g approx

3. Size ( L x W x H ) : 80 x 60 x 20 mm approx

4. Colours : Red , Blue and White

 

 

Package Includes :

1 x ABS Case for UNO R3

R59.90  Inc VAT
UNO R3 SMD (CH340G) MEGA328P for Arduino UNO R3 + USB CABLE ATMEGA328P-AU Development board (UNO SMD fixed IC)
Product introduction
UNO R3 is a microcontroller board based on the ATmega328P.

It has:
- 14 digital input/output pins (of which 6 can be used as PWM outputs)
- 6 analog inputs
- a 16 MHz quartz crystal
- a USB connection
- a power jack
- an ICSP header
- a reset button.

It contains everything needed to support the microcontroller. Simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.


Package Includes:

1 x Arduino Uno SMD
1 x Headers
1 x USB cable

Getting started with Arduino products
R99.90  Inc VAT
Acrylic Case Enclosure for Arduino UNO R3 - Transparent (Uno Clear Case)
Transparent Acrylic Clear Case For Arduino UNO R3

Features:


Material: Acrylic clear
For Arduino UNO R3 and compatibles
Assembly required

Package includes:

1 x DIY Acrylic Case with screws
R39.90  Inc VAT
Ethernet Shield W5100 R3 Support PoE For Arduino UNO Mega 2560 Nano (Arduino Ethernet R3)
Description:

With this Ethernet Shield, your Arduino board can be used to connect to the internet.
Can be used as server or client.
Directly plug puzzle board, no soldering required.
This is the latest version of the ethernet shield.
Fits all versions of Arduino main boards, 2009, UNO, mega 1280, mega 2560.
This Arduino Ethernet Shield which is based on the Wiznet W5100 ethernet chip gives you an easy way to get your Arduino online.

Specification:

Controller: w5100
Size: 7.4 x 5.4 x 2.4  (2.91 x 2.12 x 0.94inch)
MAC address: 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }


Feature:

It is directly supported by Arduino official Ethernet Library.
It adds a micro-SD card slot, which can be used to store files for serving over the network.
It is compatible with the Arduino Duemilanove (168 or 328), UNO as well as Mega (1280/2560) and can be accessed using the SD library.
The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP.
It supports up to four simultaneous socket connections.
Use the Ethernet library to write sketches which connect to the internet using the shield.

Package included:

1 x W5100 ethernet shield

Resources:
Overview
Wiki
R189.90  Inc VAT
cnc shield v3 engraving machine 3D Printer board + 4pcs A4988 driver expansion board for Arduino UNO R3 with USB cable (uno cnc control kit)
Perfect for engravers, laser cutters, CNC machines and 3D printers. This shield simply sticks on top of your Arduino board and can control up to 4 stepper motors.

Features:
CNC Shield Board:
 
Latest CNC Shield Version 3.0 for Arduino.
GRBL 0.9 compatible. (Open source firmware that runs on an UNO for Arduino that turns G-code commands into stepper signals)
PWM Spindle and direction pins
4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a  full 4th axis with custom firmware using pins D12 and D13)
2 x End stops for each axis (6 in total)
Coolant enable
Uses removable A4988 or DRV8825 compatible stepper drivers
Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to  1/32 micro-stepping )
Compact design.
Stepper Motors can be connected with 4 pin molex connectors or soldered in place.
Runs on 12-36V DC. (At the moment only the DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
Please note that this is an unassembled kit and Basic soldering skills are needed.
 
A4988 Stepper Motor Driver:
 
A4988 Stepper Motor Driver Board is a breakout board for Allegro’s A4988 DMOS Micro stepping Driver with Translator and Overcurrent Protection; please read the A4988 datasheet carefully before using this product.
Low RDS (On) Output
Automatic current decay mode  detection / selection
Mix with slow current decay modes
Synchronous rectification for low power dissipation
Internal UVLO
Crossover-current protection
3.3 and 5 V compatible logic supply
Thermal shutdown circuitry
Ground fault protection
Load short-circuit protection
Five selectable step modes: full,  1/2, 1/4, 1/8 and 1/16
Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it is powered is asking for trouble).

Step 1: Download the GRBL HEX file https://github.com/gnea/grbl/releases/tag/v1.1f.20170801
Step 2: Download XLoader https://github.com/xinabox/xLoader
Step 3: Open XLoader and Load the HEX File downloaded in Step 1.
Step 4: Select the current Board - Uno(ATmega328) and COM port.
Step 5: Press Upload.
DONE!


Package Includes:
1 X cnc shield v3
4 X A4988
4 X Heatsink
1 X UNO R3
1 X USB cable
R339.90  Inc VAT
Reprap Ramps 1.6 Kit with Mega 2560 r3 + Heatbed MK2B + 12864 LCD Controller + DRV8825 +Mechanical Switch +Cables for 3D Printer (ramp 1.6 3d print kit)
MK2B
   The latest and the best type of heatbed money can buy as of today. 100% compatible
   with all Prusa and Mendel 3d printer variants.
   Color: Red
   Size: 214mm x 214mm
   Etching: 35um copper
   Laminate: FR4 1.6mm

Mega 2560

   Microcontroller : ATmega2560
   Operating Voltage : 5V
   Input Voltage (recommended) : 7-12V
   Input Voltage (limits) : 6-20V
   Digital I/O Pins : 54 (of which 14 provide PWM output)
   Analog Input Pins : 16
   DC Current per I/O Pin : 40 mA
   DC Current for 3.3V Pin : 50 mA
   Flash Memory : 256 KB of which 4 KB used by bootloader
   SRAM : 8 KB
   EEPROM : 4 KB

12864 LCD Controller Board

   3D printers use LCD control panel, are ramps extension accessories. LCD control panel through
   which you can achieve spooling is the 3D model Gcode files are copied to the SD card, and then
   print the file via the LCD control panel. This version is an upgraded version of reprap smart     controller.

DRV8825 Stepper Motor Driver

   The DRV8825 stepper motor driver carrier board TI DRV8825 micro bipolar stepper motor drive is
   a breakthrough. The module has a pinout and interface with our A4988 stepper motor driver carrier
   is almost the same, so it can be used as a better performance of the pull-down menu board
   replacement in many applications. DRV8825 features an adjustable current limit, overcurrent and
   overtemperature protection, six micro-resolution (down 1/32-step). It uses 8.2 - 45 V, can provide
   up to about 1.5 per phase no heat sink or forced air flow (rated up to 2.2 per volume sufficient
   additional cooling).
   A simple steps and direction control interface
   Six different steps resolutions: full step, half step, 1/4-step1/8-step1/16-step, 1/32-step
   CAN interface directly with 3.3 V and 5 V systems
   Over-temperature thermal shutdown, overcurrent shutdown, undervoltage lockout
   Short to ground short circuit load protection
   4 Layer 2 oz copper PCB, in order to improve heat dissipation
   Exposed solder ground below the bottom of the driver IC on the printed circuit board pad
   Module size, pin and interface matching A4988 stepper motor driver operators in many ways
   Adjustable current control lets you set a potentiometer, which lets you use the stepper motor's
   rated voltage or more, in order to achieve a higher rate of maximum output current step
   Intelligent chopping control automatically selects the correct current decay mode (fast decay or
   slow decay)
   Maximum 45 V supply voltage
   Built-in voltage regulator (the need for any external logic supply voltage)

Limit Switch Endstop

   Quality switching elements.
   Customized high quality connection, using 22AWG wire, copper wire inside is very thick, can be
   resistant to current 2A, 300V voltage. An insulating layer over a wide range of temperatures, up to
   80 degrees. Is the common connection of thin copper wire can not match. Not easy to pull off, plug
   it convenient, for ease of use, plug the other side to do the one, you can use the direct plug.
   Red line connecting VCC (ramps of +)
   Connect the black wire GND (ramps of -)
   Green Line connection SIGNAL (ramps in s)
   tips: Under normal circumstances, the system must be configured to at least three mechanical switches.
   Pros: Easy to install

Find more help at the following links:

https://reprap.org/wiki/RAMPS_1.6

https://github.com/bigtreetech/ramps-1.6/tree/master/Ramps1.6/firmware/Marlin
R799.90  Inc VAT
Discontinued: UPGRADED BL Touch Auto Bed Leveling Sensor Creality3D CR-10 Ender 3 / Creality3D ender3 pro (AW BL Touch UPGRADED level)
Description:

This is the basic version of the original upgraded kit provided by Creality 3D which can be used for Creality V1 mainboard. It includes but is not limited to the following 3d printer:  Ender-3 / Ender-3s / Ender-3 Pro / CR-10

We also have the BASIC Version available


Features:

● Simple - BLTouch can be easily applied, since it has a small and simple structure. As BLTouch works as usual auto bed leveling sensor, Gathering information & setting up your firmware will be an easy task.
● Smart - Self-test and alarm
● High-precision - BLTouch’s Standard Deviation in repeatability is around 0.005mm, at that precise.

Specifications:


Voltage: 5V
Current: 15mA
Maximum(Peak) Current: 300mA
Case Material:  Polycarbonat(PC)               
Case Color: Semitransparent White   
Cable Length: 150mm                                   
PCB & Soldering: RoHS, Lead Free (Pb Free)

Wiring: (BLTouch can be operated in the following condition.)
 
One I/O for control (Orange wire : PWM or Software PWM)
One I/O for Zmin(White wire : endstop / Z-probe)
GND and +5V power

Creality BLTouch Latest Firmware which compatible with V3.0 and Guidance update link : http://bit.ly/2VnhRXc
 
Official guide to install new firmware
Ender 3 BL Touch Firmware


Package includes:

1 x BL-touch Auto Leveling Sensor Kit (UPGRADED Version)
R699.90  Inc VAT
Per Page      1 - 18 of 18
  • 1