Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
SG90 Universal 9g Servo Motors w/ Accessories for R/C Robot / Helicopter - Blue Yellow (sg90 servo blue)
Description:

Micro Servo Motor SG90 is a tiny and lightweight server motor with high output power. Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds but smaller. You can use any servo code, hardware or library to control these servos.


Specifications:
  • Product: SG90 Servo
  • Torque: 2.0kg/cm(4.8V), 2.2kg/cm(6V)
  • Speed: 0.09s/60°(4.8V), 0.08s/60°(6V)
  • Rotate angle: 180°
  • Operating voltage: 4.8 ~ 6V
  • Gear: plastic
  • Dead band: 7us
  • Weight: 10.5g
  • Dimension: 22.8mm × 12.2mm × 28.5mm
What's in the box?:

1 x servo motor

Resources:

ExplainingComputers has a great video on using this servo https://www.youtube.com/watch?v=xHDT4CwjUQE&t=389s

How to set up SG90 Servo Motor on Raspberry Pi

R34.90  Inc VAT
2-Axis FPV Camera Cradle Head w/ 9g Dual Servo / Steering Gear for Robot / R/C Car - Black Blue (cam pan/tilt bracket)
You'll have to know how to control this unit from you GPIO port or a servo controller module(Not included).


Description:



Specially designed for R/C car and robotics; Can be pan/tilt 180 degrees; Can hold ultrasonic sensor, IR sensor, camera or other sensors.

Specifications:

- Weight: 15g
- Working torque: 1.6KG/cm
- Response rotary speed: 0.10s / 60 degree
- Working temperature: -30~60'C
- Dead zone: 2ms
- Plug: JR, Futaba
- Rotating angle: Max. 180 degree
- Servo: digital servo
- Working current: 0.02A
- Working voltage: 3.5~6V
- Structure: Nylon plastic gear

What's in the box?:

1 x Cradle head w/ servo (25.6 /-2cm)
1 x Pack of screws
R209.90  Inc VAT
Servo Tester Third Gear Switch With Indicator Light 4.2V To 6.0v (Servo tester blue)
Description:

CCPM Servo Consistency Master/Servo Tester is a device that can be effectively used to test up to three servo motors at the same time. It is a useful tool to test Servo motors, ESC, and can be used to determine the motor directions.

This clever little Servo Tester Module has three modes to check the reaction times, neutral points and maximum angles for up to 3 servos simultaneously.

Specifications:

Item Name: Servo Tester
Size: 46x32x17mm
Weight: 8g
Color: Blue
Input: DC 4.2 to 6.0V
Output: ≤15mA (5.0)
Output signal: 1.5ms±0.5ms
Adjustment Methods: Manual, Neutral, Automatic.

Features:
Small size,low power consumption,high reliability and easy operation.
It can easily detect and configure server virtual bit, jitter and middle position.
Can connect two servos or ESC;
MCU control,good stability,high accuracy.

Note:
This product can't test a servo with a weight more than 55g.
If you want to test the motor,please first connect the ESC.

Package Includes:
1x servo tester
R89.90  Inc VAT
Adafruit DC & Stepper Motor HAT - Mini Kit (Adafr DC and Step Mini Kit)
Description:

Let your robotic dreams come true with the new DC Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control.

Raspberry Pi and motors are not included.

Since the Raspberry Pi does not have a lot of PWM pins, we use a fully-dedicated PWM driver chip onboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or HATs to the same pins.

In fact, you can even stack multiple Motor HATs, up to 32 of them, for controlling up to 64 stepper motors or 128 DC motors (or a mix of the two) - just remember to purchase and solder in a stacking header instead of the one we include.

Motors are controlled by TB6612 MOSFET drivers with 1.2A per channel and 3A peak current capabilitya big improvement over L293D drivers and there are built-in flyback diodes as well.

We even had a little space so we added a polarity protection FET on the power pins and a bit of prototyping area. And the HAT is assembled and tested here at Adafruit so all you have to do is solder on the included 2x20 plain header and the terminal blocks.

Lets check out these specs again:

  • 4 H-Bridges: TB6612 chipset provides 1.2A per bridge (3A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC.
  • Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
  • Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
  • Big terminal block connectors to easily hook up wires (18-26AWG) and power
  • Polarity protected 2-pin terminal block and jumper to connect external 5-12VDC power
  • Works best with Raspberry Pi model A , B , Pi 2 B or Pi 3 B.
  • Install the easy-to-use Python library, check out the examples and you're ready to go!

Comes with an assembled & tested HAT, terminal blocks, and 2x20 plain header. Some soldering is required to assemble the headers on. Stacking header not included.

Raspberry Pi, motors, and battery pack are not included but we have lots of motors in the shop and all our DC motors, and stepper motors work great. Check out Adafruit's detailed tutorial for tons of info including schematics, wiring diagrams, python libraries and example walkthroughs.

R529.90  Inc VAT
MG995 Metal 360 Continuous Servo 11kg.cm (MG995 Metal 360 Servo)

Description:

The standard RC servo motors only rotate 180° because they were designed for the radio control (RC) car or plane. But this limitation is annoying for robotics application. Hence, the manufacturer made a smart move by introducing the 360º continuous rotation servo motor that able to control with the standard RC signal.

For more info on standard RC servo control, please check the Wiki.

Specification:

  • 360º continuous rotation
  • Metal Gears
  • Operation Voltage: 4.8 - 6.6VDC
  • Operating Speed: 0.15sec / 60 degrees (6.0V no load)
  • Torque: 11kg.cm at 6V
  • Dimension : 40 x 19 x 43mm
  • Weight: 69g

Tutorial:

What's in the box:

1 x MG995 360 Continuous Servo
1 x Servo horns and accessories
R159.90  Inc VAT
Servo for micro:bit (servo for micro:bit)
Description:

The MonkMakes Servo for micro:bit board provides a really easy way to attach up to three servomotors to a BBC micro:bit. The board requires a power supply or battery pack to provide 5 or 6V to the servomotors. It includes a voltage regulator that will supply 3V back to the micro:bit, so that you don’t have to power it separately.

Features
  • Header pins for three servo motors
  • Up to 2A total can be supplied to the servo motors
  • Regulated 3V output to power your micro:bit
  • Polarity protection for the servomotors
  • Electrolytic reservoir capacitor for the servomotors
  • 1kΩ series resistors to the control signals to prevent accidental sort-circuits of the micro:bit’s output pins.
  • Orange LED to indicate that the Servo for micro:bit board has power.
Connections

The picture below shows a typical setup using the Servo for micro:bit board.

The following connections have been made:

  • 3 x servomotors plugged into header pins. These need to be the right way around, with the control signal (yellow or orange wire) to the left (pins marked c).
  • Alligator clip lead from GND on the micro:bit to GND on the Servo for micro:bit board.
  • Optional alligator clip lead from 3V on the micro:bit to 3V on the Servo for micro:bit board. You only need this if you want to power the micro:bit from the same battery pack as the servomotors. If you want to power the micro:bit over USB or the JST battery connector then you do not need this connection.
  • Alligator clip leads between P0, P1, P2 on the micro:bit to the Servo for micro:bit board. These need to match up with the servomotors you are using, so if you only need the board for one servomotor, then just connect P0 on the micro:bit to P0 on the Servo for micro:bit and make sure that there is a servomotor attached to the header pins marked 0.
  • Power to the screw terminal on the Servo for micro:bit. Typically this will be a 4xAA battery pack or other power supply. Make sure that the positive lead goes to the screw terminal marked with a
Test Software

To check that everything is working, this Blocks code project will get you started. Flash it onto your Servo for micro:bit and the servo arms should all start waggling in a random manner. You can see a video of this in action here.



The servo write pin block allows you to set the angle of the servomotor’s arm between 0 and 180 degrees. Note that servomotors, will not usually travel a full 180 degrees so you may find the actual range is more like 10 to 170 degrees.




R179.90  Inc VAT
SG90 Servo bracket for Pan/Tilt Camera Platform (bracket only pan/tilt)
Description:

Easily pan or rotate your camera on your robot or other projects with this bracket kit.

Specifications:
  • Specially designed for R/C car and robotics projects
  • pan/tilt 180 degrees
  • hold ultrasonic sensor, IR sensor, camera or other sensors.
  • suitable for use with SG90 servos

Packing List

1 x Cradle head parts
1 x Pack of screws
R19.90  Inc VAT
Servo Driver Module for Raspberry Pi Pico, 16-ch Outputs, 16-bit Resolution (WS Pico servo board)
Servo Driver Module for Pico

Ideal for controlling robotic arm or hexapod walker

Features at a glance
  • Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards
  • Up to 16-Channel servo/PWM outputs, 16-bit resolution for each channel
  • Integrates 5V regulator, up to 3A output current, allows battery power supply from the VIN terminal
  • Standard servo interface, supports common used servo such as SG90, MG90S, MG996R, etc.
  • Exposes unused pins of Pico, easy expansion
  • Comes with development resources and manual (Raspberry Pi Pico C/C and MicroPython examples)
Specifications
Operating voltage5V (Pico) or 6~12V (VIN terminal)Servo voltage level5V
Logic level3.3VControl interfaceGPIO
Mounting hole size3.0mmDimensions65 × 56mm


Raspberry Pi Pico header compatibility

onboard female pin header for direct attaching to Raspberry Pi Pico



Standard servo interface

supports common used servo like: SG90, MG90S, MG996R



Onboard 5V regulator

flexible power options: powered from Pico directly,
or from VIN battery input terminal with max 3A current output



Application example



Raspberry Pi Pico and servos are NOT included.


Pinout definition



Outline dimensions





R193.90  Inc VAT
MG996R Servo Metal Gear High Torque (MG996R Servo)
Description:

The MG996R is a metal gear servo motor with a maximum stall torque of 11 kg/cm. Like other RC servos the motor rotates from 0 to 180 degree based on the duty cycle of the PWM wave supplied to its signal pin.



Specifications:
  • Product: MG996R Servo
  • Torque: 9kg/cm(4.8V), 11kg/cm(6V)
  • Speed: 0.19s/60°(4.8V), 0.18s/60°(6V)
  • Rotate angle: 180°
  • Operating voltage: 4.8 ~ 6V
  • Gear: metal
  • Dead band: 5us
  • Weight: 55g
  • Dimension: 40.7mm × 19.7mm × 42.9mm


What's in the box ?

1 x MG996R Servo with Arm kit




R84.90  Inc VAT
Servosix for Raspberry Pi and Arduino (Board Only) (Servosix For Pi)
Description:

The Servo Six board simplifies the process of connecting up to six servo motors to a Raspberry Pi or Arduino.

Specifications:

Absolute Maximum Ratings Units

 - Input voltage - 12 V
 - Max. total continuous current to motors - 2A

Electrical Characteristic Units

 - Input voltage to screw terminals 3 to 12 V
 - Servomotor reservoir capacitor 470 µF


What's in the box ?

1 x Servosix board 


Resources : 

Instructions (PDF)
Datasheet (PDF)







(* Raspberry pi, Leaf, Servo and Jumper cables NOT included *)








(* Arduino, Servo and Jumper cables NOT included *)







R109.90  Inc VAT
Kitronik Robotics Board for Raspberry Pi Pico (KT Robotics Board Pico)
Description:

Make the Raspberry Pi Pico the core of your new robotics project with the Kitronik Compact Robotics Board for Raspberry Pi Pico.

The Robotics Board features 2 Dual H Bridge Motor Driver ICs. These are capable of driving 2 standard motors or 1 stepper motor each, with full forward, reverse, and stop control. There are also 8 servo outputs, capable of driving standard and continuous rotation servos. They can all be controlled by the Pico using the I2C protocol, via a 16 channel driver IC. The IO break out provides connections to all the unused pins on the Pico. The 27 available I/O pins allow other devices, such as sensors or ZIP LEDs, to be added to the board.

Power is provided via either a terminal block or servo style connector. The supply is then controlled by an on/off power switch to the board and there is also a green LED to indicate when the board has power. The board then produces a regulated 3.3V supply which is fed into the 3V and GND connections to power the connected Pico. This removes the need to power the Pico separately. The 3V and GND pins are also broken out on the header, which means external devices can also be powered.

To use the robotics board, the Pico should be firmly inserted into the dual row pin socket on the board. Ensure the Pico is inserted with the USB connector at the same end as the power connectors on the robotics board. This will allow access to all of the board functions and each pin broken out.


Features :

  • A compact yet feature-packed board designed to sit at the heart of your Raspberry Pi Pico robotics projects.
  • The board can drive 4 motors (or 2 stepper motors), with full forward, reverse, and stop control, and 8 servos.
  • It also features 27 other I/O expansion points and Power and Ground connections.
  • The I2C communication lines are also broken out allowing other I2C compatible devices to be controlled.
  • Additionally, the board features an on/off switch and power status LED.
  • Power the board via either a terminal block or servo style connector.
  • The 3V and GND pins are broken out to solder pads, allowing external devices to be powered.
  • Code it with MicroPython via an editor such as the Thonny editor.

Specifications :

Supply VoltageNumber of Servo ChannelsNumber of Motor ChannelsServo / Motor VoltageMax Continuous Current (all Servos an Motors)Max Motor currentAdditional IOAdditional GNDAddional 3V3
3 - 10.8V
8
4 DC / 2 Stepper
Same as Supply Voltage
12 Amps
1.5A / Motor
26 (via solder pads)
8 (via solder pads)
7 (via solder pads)


What's in the box ?


1 x Kitronik Robotics Board (for Raspberry Pi Pico)









 (* Raspberry Pi And add ons are NOT included - ONLY the Robotics Board *)


(* Raspberry Pi And add ons are NOT included - ONLY the Robotics Board *)




(* Raspberry Pi And add ons are NOT included - ONLY the Robotics Board *)

R289.90  Inc VAT
Maker Pi RP2040 - Simplifying Robotics with Raspberry Pi RP2040 (Maker Pi RP2040 robotics)
Description:

Cytron Maker Pi RP2040 features the first microcontroller designed by Raspberry Pi - RP2040, embedded on a robot controller board. This board comes with dual channel DC motor driver, 4 servo motor ports and 7 Grove I/O connectors, ready for your next DIY robot / motion control project. Now you can build robot, while trying out the new RP2040 chip.

The DC motor driver onboard is able to control 2x brushed DC motors or 1x bipolar/unipolar stepper motor rated from 3.6V to 6V, providing up to 1A current per channel continuously. The built-in Quick Test buttons and motor output LEDs allow functional test of the motor driver in a quick and convenient way, without the need of writing any code. Vmotor for both DC and servo motors depends on the input voltage supplied to the board.



Features:

  • Powered by Rapberry Pi RP2040
    • Dual-core Arm Cortex-M0 processor
    • 264KB internal RAM
    • 2MB of Flash memory
    • the exact same specifications with Raspberry Pi Pico
  • Robot controller board
    • 4x Servo motors
    • 2x DC motors with quick test buttons
  • Versatile power circuit
    • Automatic power selection: USB 5V, LiPo (1-cell) or Vin (3.6-6V)
    • Built-in 1-cell LiPo/Li-Ion charger (over-charged & over-discharged protection)
    • Power on/off switch
  • 13x Status indicator LEDs for GPIO pins
  • 1x Piezo buzzer with mute switch
  • 2x Push button
  • 2x RGB LED (Neopixel)
  • 7x Grove ports (flexible I/O options: digital, analog, I2C, SPI, UART...)
  • Preloaded with CircuitPython by default
  • Mouting holes
    • 4x 4.8mm mounting hole (LEGO® pin compatible)
    • 6x M3 screw hole

What's in the box ?

  • 1x Maker Pi RP2040
  • 4x Grove to Female Header Cable
  • 1x Mini Screwdriver
  • 1x Silicone Rubber Feet (Pack of 4)

Resources:



Powering the Maker Pi 2040

There are three ways to supply power to the Maker Pi RP2040 - via USB (5V) socket, with a single cell LiPo/Li-Ion battery or through the VIN (3.6-6V) terminals. However only one power source is needed to power up both controller board and motors at a time. Power supply from all these power sources can all be controlled with the power on/off switch onboard.




Maker Pi RP2040 features all the goodness of Cytron's Maker series products. It too has lots of LEDs useful for troubleshooting (& visual effects), is able to make quite some noise with the onboard piezo buzzer and comes with push buttons ready to detect your touch.






Simple Robotic projects done

(* Only includes the Maker board - All other contents are for idea / advertising purposes only*)












R209.90  Inc VAT
SC15 17kg Large Torque Programmable Serial Bus Servo (programmable serial servo)
Description:

SC15 Programmable Serial Bus Servo

Specifications

PRODUCT TYPESC15 serial bus servo
TORQUE[email protected]; [email protected]; [email protected]
ROTATION ANGLE180° (servo mode angle control) / 360° (motor mode continuous rotation)
POS SENSOR RESOLUTION180° / 1024
MECHANICAL LIMITED ANGLENo Limit
OPERATING VOLTAGE4.8-8.4V
GEARhigh precision metal gear
IDLING SPEED0.18sec / 60°@4.8V 0.16sec / 60°@6V
ID RANGE0-253
BAUDRATE38400bps ~ 1Mbps
FEEDBACKPosition, Load, Speed, Input Voltage
IDLING CURRENT200 mA
STALLING CURRENT1700 mA

Application Examples
  • Servos will provide various feedback like position, speed, torque lock, operating mode (servo mode, servo motor mode, etc.) for advanced projects requiring closed-loop automatic control
  • Ideal choice for building quadruped robots, hexapod walkers, robotic arms and other robotic projects requiring multiple servos

* images here are for reference ONLY

UART Serial Bus Control

Up To 253 Servos Can Be Connected In Series At The Same Time



Note: though one channel UART is able to control up to 253 bus servos, due to the high power of the servos, it is necessary to consider whether the power supply solution is enough when using too many servos. The servo driver board is NOT included, please purchase separately if needed.
Large Torque

Up To 17kg.Cm Torque On 8.4V Voltage, Suitable For Building Quadruped Robots, Hexapod Walkers, Robotic Arms And Other Robotic Projects Requiring Multiple Servos


for reference only, the JETANK robot is NOT included.

Two-Way Feedback




The Servos Will Provide Various Feedback Like Position, Load, Speed, And Input Voltage,

In Real Time

Dual Modes: Servo Or Motor

precise rotation angle control, on servo mode

 

continuous rotation, on motor mode

 

Details Introduction

Nylon and fiberglass case
Improved heat-resistance, size stability, rigidity, and mechanical performance

 

High strength aluminum servo wheels
Using T6061 aluminum alloy, good corrosion-resistance

 

High precision copper and steel gears
Ingenious combination of the two, lower operating noise, better stability and mechanical performance

Outline Dimensions


PACKAGE CONTENT

Weight: 0.07 kg

  1. SC15 Servo x1



R359.90  Inc VAT
Animatronic Head Kit for micro:bit (Animatronic Head micro:bit )
Description:

This kit contains everything you need (except a micro:bit and batteries) to make an animatronic head with two moving eyeballs and sound from a loudspeaker.

The kit includes software for three simple projects, but we also hope that you will use this kit to write you own programs and you can also add to the basic head mechanism and build it into something even more fun.

Specifications:




What's in the box ?

1 x Servo for micro:bit
1 x speaker for micro:bit
2 x 9g micro servomotors
1 x 3 AA battery box 
1 x Alligator clip leads (10 Leads)
2 x Ping-pong balls with servo connector
1 x Laser-cut acrylic piece marked A (front)
1 x Laser-cut acrylic piece marked B (back)
1 x Laser-cut acrylic piece marked C (top)
1 x Laser-cut acrylic piece marked F (base)
2 x laser-cut acrylic piece marked D (spacers)
1 x Laser-cut acrylic piece marked E (pegs)
1 x M3 steel nut and bolt pairs
1 x M2 plastic nut and bolt pairs
1 x Small screw-driver
1 x Spanner

(* micro:bit & Batteries NOT INCLUDED)


Resources :

- Instructions (PDF)
- Data Sheet (PDF)
- High Res images (Google Drive)





















R759.90  Inc VAT
Per Page      1 - 14 of 14
  • 1