Search
Search Criteria
Products meeting the search criteria
MC4T-A1 Solar Branch Cable Splitter MFF FMM (Solar split MFF FMM connector)
1. Widely used in the connection of MC4 solar connectors for solar system;
Description:
1. Widely used in the connection of MC4 solar connectors for solar system;
2. With the capacity of anti-aging and resistance to ultraviolet radiation on the outer cover;
3. To meet the using requirement under bad outdoor conditions;
4. Easy and reliable connection of the solar cables to the pv system (solar panels, inverters).
Specifications:
Product No.: MC4T-A1
Rated Voltage: TUV 1000V DC / UL 600V DC
Rating Current: 20A~30A
Suitable cable cross sections: 2.5mm2~ 6.0mm2 / 14AWG~ 10AWG
Pin dimension: 4.0mm
Proof voltage: DC 8KV(1Min)
Pollution degree: 2
Protection class: Class II
Contact Material: Copper, tin-plated
Contact Resistance: 5mW
Connector Material: PPO
Degree of Protection IP: IP67(IEC 60529)
Temperature Range: -40oc +85oc
Flame Class: UL94V - 0
Package includes:
1 x MC4T-A1 Solar PV MC4 Branch Connector set (1 x MFF and 1 x FMM)
Package includes:
1 x MC4T-A1 Solar PV MC4 Branch Connector set (1 x MFF and 1 x FMM)
Power Over Ethernet Passive POE Injector Splitter Kit (POE kit - Passive)
Description:
The complete Passive Power over Ethernet SET contains two pieces - INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet. Passive Power Over Ethernet SET is applicable for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices. Passive Power over Ethernet SET is compatible with most devices available on the market such as D-Link, Linksys, Airlive, Senao, Wline, Micronet, Edimax etc. The devices can be supplied standardly up to 50V. (The power adapter is not included - it is possible to use the power adapter of the powered device as access point, IP camera etc.) Passive PoE`s range is normally form 30-40 metres/100-130 ft (the real distance depends on the power supply, type of cable and powered device).
The complete Passive Power over Ethernet SET contains two pieces - INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet. Passive Power Over Ethernet SET is applicable for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices. Passive Power over Ethernet SET is compatible with most devices available on the market such as D-Link, Linksys, Airlive, Senao, Wline, Micronet, Edimax etc. The devices can be supplied standardly up to 50V. (The power adapter is not included - it is possible to use the power adapter of the powered device as access point, IP camera etc.) Passive PoE`s range is normally form 30-40 metres/100-130 ft (the real distance depends on the power supply, type of cable and powered device).
Contains: INJECTOR and SPLITTER.
Complete set for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices such as D-Link, Ovislink, Senao, Wline, RouterBOARD, WRAP boards and other devices using passive POE injection.
Connector Barrel size is 2.1mm (5.5 x 2.1 mm)
Power Pins 4,5 + and 7,8 -
1. It is very simple to connect a passive PoE. On the lower part, we connect the Ethernet
RJ connector of passive PoE to the PC, Hub or Switch and connect the power adapter
to the power socket.
2. On the opposite end (RJ socket) we connect the Ethernet cable leading to the far end.
3. At the far end, we connect the end of the Ethernet cable to the RJ45 socket and connect
the power connectors and the Ethernet to the powered equipment. The equipment is now
connected by them.
Input / Output Specifications:
Supports Voltage: 5V, 12V, 24V, 48V
Support Voltage Max Output Current 0.4A Max.
Over Current Protection None
General Specifications:
Operating Temperature 0° ~ +45°
Storage Temperature -30oC ~ +70oC
CASE OF MATERIAL PVC
Ethernet Date Rate 10/100Mbps
Ethernet Cable TIA/EIA 568 Cat.5
Humidity Up to 90%
Weight: 24g*4
DC Plugs 2.1mmx5.5mmx12mm
Length 155mm
Package Included:
1 x RJ45-DC set Splitter
30A-1V Split-Core SCT013 AC Current Sensor (30A split core current sensor)
This is split-core current transformer is an AC current sensor. It is used for current measurement, monitor and protection for AC motors, lighting equipment, air compressors, home automation etc.
Features:
- Opening size: 13x13mm
- Rated input current (RMS): 10% - 120% of that is 3A - 36A
- Output voltage(RMS): linear output. When the input current is 30A, the output voltage is 1V
- Linearity: ± 3%
- Output connectors: 3.5mm standard three-pin plug
- Lead length: 1 m
This sensor is perfect for use with our Raspberry Pi RPICT3T1 current and temperature sensor board.
Features:
- Opening size: 13x13mm
- Rated input current (RMS): 10% - 120% of that is 3A - 36A
- Output voltage(RMS): linear output. When the input current is 30A, the output voltage is 1V
- Linearity: ± 3%
- Output connectors: 3.5mm standard three-pin plug
- Lead length: 1 m
This sensor is perfect for use with our Raspberry Pi RPICT3T1 current and temperature sensor board.
100A-1V Split-Core SCT013 AC Current Sensor (100A split core current sensor)
This is a split-core current transformer which is used as an AC current sensor. It is popularly used for current measurement, monitoring and protection for AC motors, lighting equipment, air compressors, home automation etc.
Features:
- Opening size: 13 x 13mm
- Rated input current (RMS): 10% - 120% of that is 1A~100A
- Output voltage(RMS): linear output. when the input current is 100A, the output voltage is 1V
- Linearity: ± 3%
- Output connectors: 3.5mm standard three-pin plug
- Lead length: 1m
Features:
- Opening size: 13 x 13mm
- Rated input current (RMS): 10% - 120% of that is 1A~100A
- Output voltage(RMS): linear output. when the input current is 100A, the output voltage is 1V
- Linearity: ± 3%
- Output connectors: 3.5mm standard three-pin plug
- Lead length: 1m
1 pair MC4 3Y Branch parallel connection 30A 1000V solar Panel Cable Connector(MMMF and FFFM) (solar 3way split cable)
Description:
Auto-lock enables more easy and reliable connection.
Water and dust proof.
Insulation material: GE PPO
Rated Voltage: TUV 1000 DC/ UL 600V DC
Test voltage: 6KV(50Hz,1Min)
Contact material: copper, tin plated
Contact resistance: less than 0.5 m ohm
Degree of protection: IP67
Pollution Degree: 2
Protection class: Class II
Flame class: UL94-V0
Plug Force: less than 50N
Withdrawal force: more than 50N
Ambient temperature range: -40 ~ + 90.
Compatible cable cross sections Solar cable: 2.5mm⊃2; ,4.0 mm⊃2; and 6.0 mm⊃2; (14 awg,12awg,10awg)
Pin dimension: 4.0mm
Package Includes:
1 x pair 3 way split cables(MMMF and FFFM)
Auto-lock enables more easy and reliable connection.
Water and dust proof.
Insulation material: GE PPO
Rated Voltage: TUV 1000 DC/ UL 600V DC
Test voltage: 6KV(50Hz,1Min)
Contact material: copper, tin plated
Contact resistance: less than 0.5 m ohm
Degree of protection: IP67
Pollution Degree: 2
Protection class: Class II
Flame class: UL94-V0
Plug Force: less than 50N
Withdrawal force: more than 50N
Ambient temperature range: -40 ~ + 90.
Compatible cable cross sections Solar cable: 2.5mm⊃2; ,4.0 mm⊃2; and 6.0 mm⊃2; (14 awg,12awg,10awg)
Pin dimension: 4.0mm
Package Includes:
1 x pair 3 way split cables(MMMF and FFFM)
Ethernet Splitter (Ethernet Splitter)
Use this converter to split your lan cable into two cables
2 Way DC connector splitter 5.5mm x 2.1mm (DC barrel Y splitter cable)
Description:
Specifications:
What's in the box?
1 x DC splitter cable
- DC barrel splitter cable
- Can be used on Arduino
Specifications:
- 1 Female to 2 male splitter
- 5.5mm x 2.1mm
What's in the box?
1 x DC splitter cable
- 1