Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
The USB to Micro USB Cable is 1.5m long and has been tested for compatibility with the Raspberry Pi
R44.90  Inc VAT
R179.90  Inc VAT
This Pi Zero USB Adaptor converts the Zero's Micro USB B Port to a full sized USB A port
R19.90  Inc VAT
The ProtoZero is a prototyping board for the Raspberry Pi Zero, that also fits the A , B and Pi2.
R134.90  Inc VAT
Need to send your Raspberry Pi USB signals over a longer distance?
R139.90  Inc VAT
This nifty little USB pig-tail adds audio input and output through USB
R139.90  Inc VAT
Official Raspberry Pi USB A male to Micro B 1M (Red 1m micro usb cable)
Description:

The USB to Micro USB Cable is 1m long manufactured by Raspberry Pi. This cable can be used in conjunction with a USB mains charger or Computer USB port to power your Raspberry Pi.

Specifications:
  • 1m Long
  • Colour: Red
  • Connector Type A: USB 
  • Connector Type B: Micro USB
Contents:
  • 1 x USB A male to USB micro B male 1m
R24.90  Inc VAT
Zero Adapter Kit With Official Raspberry Pi Adapters (Zero official adapter kit)
Description:

This adapter kit was created for the Raspberry Pi Zero. It includes all the adapters you need to get your Raspberry pi Zero going.

What's in the box?

1 x pin header 2x20
1 x Official Raspberry Pi male mini HDMI to female HDMI adapter
1 x Official Raspberry Pi OTG male micro USB to female USB A adapter
R39.90  Inc VAT
Raspberry Pi Official Pi3/ZERO/Pico Micro USB Power Supply 5.1V 2.5A square white (Pi3 Power 2.5A square White)

Description:

You will find a South African plug adapter here

This PSU supports up to 2.5A of current, so it won't let you down when powering hungry devices through your Raspberry Pi 3 Model B, Zero and Pico

Specifications:

Output

- Output voltage: 5.1V DC
- Minimum load current: 0.0A
- Nominal load current: 2.5A
- Maximum power: 12.5W
- Load regulation: ±5%
- Line regulation: ±2%
- Ripple & noise: 120mVp-p
- Rise time: 100ms maximum to regulation limits for DC outputs
- Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
- Protection: Short circuit protection

Overcurrent protection
- Efficiency: 80.73% minimum (output current from 100%, 75%, 50%, 25%)
- Output cable: 1.5m 18AWG
- Output connector: mirco USB

Input
- Voltage range: 100–240Vac (rated) 96–264Vac (operating)
- Frequency: 50/60Hz ±3Hz
- Current: 0.5A maximum
- Power consumption (no load): 0.075W maximum
- Inrush current: No damage shall occur and the input fuse shall not blow

What's in the box?

1 x Official Power Supply


WARNINGS
• This product should be operated in a well-ventilated environment.
• The connection of incompatible devices to this power supply may affect compliance, result in damage to the unit and invalidate the warranty.

SAFETY INSTRUCTIONS
To avoid malfunction or damage to this product please observe the following:
• Do not expose to water or moisture, or place on a conductive surface whilst in operation.
• Do not expose to heat from any source; this is designed for reliable operation at normal ambient room temperatures.
• Do not attempt to open or remove the power supply case.


R159.90  Inc VAT
Official Raspberry Pi Mouse (Red/White) (Official red/white mouse)

Description:

The Official Raspberry Pi Mouse is finally here!

This sleek, stylish and ergonomic mouse from the team at Raspberry Pi includes three buttons, two main ones for right and left click, and a scroll wheel with button for scrolling. . . and more clicking. . . what more do you need from a mouse!

Mouse Specification:

  • Three-button optical mouse
  • Scroll wheel
  • USB type-A connector
  • Compatible with all Raspberry Pi products
  • Ergonomic design for comfortable use
  • Available in Red/White and Black/Grey
  • This mouse will look great with your Red/White official keyboard

What's in the box?:

1 x USB Mouse
R129.90  Inc VAT
Official Raspberry Pi Mouse (black/grey) (Official black/grey mouse)
Description:

The Official Raspberry Pi Mouse is finally here!

This sleek, stylish and ergonomic mouse from the team at Raspberry Pi includes three buttons, two main ones for right and left click, and a scroll wheel with button for scrolling. . . and more clicking. . . what more do you need from a mouse!

Mouse Specification:

  • Three-button optical mouse
  • Scroll wheel
  • USB type-A connector
  • Compatible with all Raspberry Pi products
  • Ergonomic design for comfortable use
  • Available in Black/Grey and Red/White
R129.90  Inc VAT
USB A male to USB micro B male 1.5m (USB cable micro 1.5m)
    Description:

    The USB to Micro USB Cable is 1.5m long and has been tested for compatibility with the Raspberry Pi. This cable can be used in conjunction with a USB mains charger or Computer USB port to power your Raspberry Pi.

    Specifications:
    • Tested for Compatibility with the Raspberry Pi
    • 26AWG (Up to 2A)
    • 1.5m Long
    • Colour: Black
    • Connector Type A: USB 
    • Connector Type B: Micro USB
    Contents:
    • 1 x USB A male to USB micro B male 1.5m

      The USB to Micro USB Cable is 1.5m long and has been tested for compatibility with the Raspberry Pi
      R44.90  Inc VAT
      Charger Docter - USB Voltage and Current Meter (USB Docter single)
      Description:

      You can use this device from 3.5-7VDC input voltage (although most USB  devices tend to hover around 4.75 to 5.25) and up to 3A of current. It  flips between voltage and current readouts every 3 seconds or so. It's a  very handy tool for testing USB devices, checking load levels and  debugging battery chargers and boost converters.

      Specifications:
      • USB 1.x and 2.x - all data speeds. Does not have USB v3 pins so USB v3 connections will automatically downgrade to v2
      • Working Range: 0~3A, 3.5~7VDC
      • Resolution: 10mV / 10mA
      • Operating Temperature: 0-60ºC
      • Contents:
      • Camera Board 360 Gooseneck Mount V2

      Dimensions:

      • 21mm x 53mm x 15mm / 0.8" x 2.1" x 0.6"
      • USB Plug: 13mm / 0.5"
      • Weight: 16.2g
      What's in the box?:

      1 x USB Voltage and Current Meter
      R59.90  Inc VAT
      USB A to USB B cable 1.8m for Arduino (USB A to USB B(Arduino))
      Description:

      The staple of any USB connection, the USB A to B cable connects any standard host device (computer, hub, or controller) to any standard peripheral (printer, scanner, external drive).

      Specification:

      1. USB 2.0 specification
      2. Connector: USB 2.0-A male > USB 2.0-B male
      3. Cable length: 1.8m
      4. For use with Arduino

      What's in the box?

      1 x USB A to B cable

      R40.64  Inc VAT
      SanDisk Ultra Fit USB 3.1 Flash Drive 16GB (Sandisk flash fit 16GB)

      Add Space, Fast. Just Plug It In.

      The simple way to add extra, high-speed storage to your device! The SanDisk Ultra Fit™ USB 3.1 Flash Drive delivers performance that lets you move a full-length movie up to -15x faster than with standard USB 2.0 drives. Plus, thanks to its compact, streamlined design, you can plug it in and leave it in.

      Compact plug-and-stay design

      This compact flash drive is designed as plug-and-stay storage for laptops, tablets, TVs, gaming consoles, car audio systems, and more. Plug it in, and you’ve got instant storage that’s always on board!

      High-speed USB 3.1 performance
      Transfer files quickly with 130MB/s read speed. With write speeds up to 15x faster than standard USB 2.0 drives, you can move a full-length movie to the drive in less than 30 seconds.

      SanDisk SecureAccess® software helps protect your privacy
      Create a private folder on your drive with SanDisk SecureAccess software. This 128-bit AES encryption software makes it easy to password-protect critical files. Drag and drop files into the vault, and they'll be encrypted.

      Full Specifications

      Interface: USB 3.1 Gen 1
      Connector: USB-A
      Compatibility: USB 3.1 (backward compatible with USB 3.0 and USB 2.0)
      Sequential Read Performance: Up to 130MB/s
      Dimensions: 29.8mm x 14.3mm x 5mm

      What's in the box?

      1 x USB flash drive

      Datasheet

      Disclosures

      1. 32GB, 64GB, 128GB, 256GB, 512GB: Write up to 15X faster than standard USB 2.0 drives (4MB/s), read speeds up to 130MB/s. 16GB: Write faster than standard USB 2.0 drives (4MB/s); read speeds up to 130MB/s. USB 3.1 Gen 1 or USB 3.0 port required. Based on internal testing; performance may be lower depending on host device. 1MB=1,000,000 bytes. 
      2. Password protection uses 128-bit AES encryption and is supported by Windows® 7, Windows 8, Windows 10 and Mac® OS X® v10.9 (Software download required for Mac, see www.SanDisk.com/SecureAccess). FOR USE IN CHINA:  Password protection is supported by Windows® 7, Windows 8, Windows 10 and Mac® OS X® v10.9 (Software download required for Mac, see www.SanDisk.com/SecureAccess)
      3. Based on 1.2GB MPEG-4 video transfer to drive with USB 3.1 Gen 1 or USB 3.0 host device. Results may vary based on host device, file attributes, and other factors. 
      4. Registration required; terms and conditions apply.
      5. 1 GB=1,000,000,000 bytes. Actual user storage less. 
      R119.90  Inc VAT
      1.5M USB A Male To Mini 5 Pin Male Black (1.5m usb mini)
      Description:

      This USB 2.0 cable enables you to connect different devices e.g. HDD enclosure, digital cameras, mobile phones, navigation systems etc.

      Specifications:

      • Meets or Exceeds USB 2.0 Specifications
      • Connects to Cameras, PDA's, etc with Mini-B 5-Pin connectors
      • Supports faster data transfer rate (1.5 to 480 Mbps) for low speed and high speed devices including multimedia applications
      • Premium double-shielded cables with tinned copper braid and aluminum Mylar foil
      • Molded connectors and integral strain relief for extra durability and long life.

      What's in the box?:

      1 x USB to 5 pin cable
      R44.90  Inc VAT
      USB Detector Current Voltage 3V-9V Tester Dual USB Dual display (USB Docter Dual)
      Description:

      Use the USB Charger Doctor to measure the working voltage and current output for any USB port and project. This plastic dongle plugs between a USB device, and passes the data lines through. There's a 0.05 ohm resistor in line with the power pin that is used to measure current draw. The Doctor's digital display instantly reads the numbers out for testing devices such as chargers, cables, and cell phones.

      You can use this device from 3.5-7VDC input voltage (although most USB devices tend to hover around 4.75 to 5.25) and up to 3A of current. It displays both voltage and current readouts. It's a very handy tool for testing USB devices, checking load levels and debugging battery chargers and boost converters.

      Specifications:

      Voltage range: 3.3V-9V
      Current range: 0-3A
      Voltage display: red
      Current display: blue
      Out put : 2 USB
      Size: 52mm x 34mm x12mm
      Weight: 16g
      Shell color: Dark black

      What's in the box?:

      1 x Voltage Tester Dual USB

      R179.90  Inc VAT
      Pimoroni - Noir 7" Touchscreen Display Frame (Stand Display Black Noir)

      Description:

      Protect your new 7" Raspberry Pi Touchscreen with this lovely little display frame from Pimoroni! Designed with a slimline profile, it's perfect for keeping your Raspberry Pi screen upright, and at an ideal viewing angle!

      Please note: Raspberry Pi Touchscreen and Raspberry Pi are not included

      Features:

      • Slim profile made up of only 3 layers keeps the screen protected
      • 2 Legs hold the screen at an ideal viewing angle
      • Provides support and protection to the back of the screen
      • All Raspberry Pi Ports accessible
      • Leaves touchscreen free for touching
      • No tools required for assembly
      What's in the box?:

      1 x 7" Touchscreen Display Frame
      R191.67  Inc VAT
      R249.90
      FR-4 Double Side Prototype PCB Printed Circuit Board kit (prototype board kit)
      Description:

      Standard Prototype PCB is great for prototyping and building circuits but it can be time consuming to use with components with certain pin configurations such as IC's.

      These boards are especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering all the pieces in place.

      Specifications:

      Grid : 0.1" (2.54mm)
      Thickness : 1.6mm(5pcs)
      Hole diameter : about 1mm
      Material : FR-4 (glass fiber)
      All holes are plated through
      Both sides are identical
       
      Dimensions                           Hole(column x  row)   
      50 x 70mm, 1.97" x 2.76"      24 x 18                          
      40 x 60mm, 1.57" x 2.36"      20 x 14                          
      30 x 70mm, 1.18 x 2.76"        24 x 10                          
      20 x 80mm, 0.79" x 3.15"      28 x 6                            
       
      Package Includes:
       
      4 x FR-4 Double Side Prototype PCB Printed Circuit Board

      Resources:
      Introduction to soldering
      Video: How to solder properly
      The secrets to good soldering
      R24.90  Inc VAT
      Panel Mount - USB A Male to USB A Female 30cm (panel mount USB AmAf)

      Description:

      This handy USB extension cable will make it easy for you to enclose a device that has a A type (USB host) port. It's short (30cm between connectors), so perfect for mounting your Raspberry Pi, Beagle Bone, Arduino etc. into a box!

      The jack half has two mounting 'ears' with M3 screws installed, 8mm apart. The ears are flexible so the holes don't have to drilled very precisely.

      Our Panel Mount USB Cable Features:

      • Specially Manufactured for ModMyPi for use with the Raspberry Pi & Other Microcontrollers 
      • Length between connectors: 30cm
      • Colour: Black
      • 28AWG
      • USB A Male to Panel Mount USB A Female
      • M3 Mounting Ears
      What's in the box:

      1 x USB A Male to Panel Mount USB A Female
      R29.90  Inc VAT
      Compact Keyboard Wired USB (compact keyboard)

      Description:

      It's a compact wired USB keyboard at an excellent price! This one connects directly to the Raspberry Pi USB ports, and has been tested to make sure it's fully compatible!

      We've chosen a high quality, low profile version which accentuates a soft touch and tactile feedback for comfortable typing.

      ModMyPi's Compact Wired USB Keyboard Features:
       
      • Compact UK layout keyboard 
      • USB connection with 1.5 Metre cable
      • Tested for compatibility with the Raspberry Pi
      • Number Lock and Caps Lock Lock Indication Lights
      • Low Profile Tactile Keys for Typing Comfort
      • CE, FCC and RoHS Compliant
      • Comes Retail Packaged
      • Non-slip Rubber Feet Pre-Assembled

      What's in the box?:

      1 x Compact Keyboard
      R179.90  Inc VAT
      USB To RS232 TTL PL2303HX Cable Adapter Module Converter (USB split to jumper Female)
      Description:


      USB TO RS232 TTL PL2303HX Auto Converter Module Adapter 5V Output, provides the best and convenient way to connect your RS232 TTL devices or DEMO board to your computer via the usb port.

      Specification:

      Built-in TTL COM PC-PL2303HX Chip
      Standard USB type A male and TTL 4 pin connector
      Cable length: 1000mm (39 3/8 in)
      Simple and Easy way to give USB support to your projects
      Black cable-----GND
      Green cable----TXD
      White cable----RXD
      Red cable ---- VCC (5V)

      Package includes:

      1 x USB to RS232/TTL PL2303HX cable adapter module
      R59.90  Inc VAT
      Pi Zero micro USB to USB A Adapter White (Zero USB adapter)
      Description:

      This Pi Zero USB Adaptor converts the Zero's Micro USB B Port to a full sized USB A port so you can plug in your mouse, keyboard or any other required peripherals! It's an OTG (on-the-go) host cable, which means your Zero can act as a host (master) or client (slave) device! This one's in white!

      Features:

      • Micro USB B (Male) to USB A (Female)
      • OTG On-The-Go Host Cable
      • CE and ROHS Compliant
      • For the Raspberry Pi Zero
      This Pi Zero USB Adaptor converts the Zero's Micro USB B Port to a full sized USB A port
      R19.90  Inc VAT
      ProtoZero (protozero phat)
      Description:

      The ProtoZero is a prototyping board for the Raspberry Pi Zero, that also fits the A , B and Pi2.

      The ProtoZero is a breadboard-style prototyping board for the new Raspberry Pi Zero (and the first ever Pi Zero based Kickstarter campaign).

      It's designed to make it easy to move your messy Raspberry Pi breadboard projects to a PCB.

      Simply add your components to the prototyping area, connect GPIO, power and GND as required - solder it all up and away you go!

      Features

      • Full breakout of the PiZero's 40-Pin GPIO header, ready to connect to your project
      • 154 holes of prototyping area - set in lanes of 3 to make it even easier to connect your components to the Pi
      • Labelled GPIO numbers and printed lanes on both sides on the board
      • High-quality ENIG (Electroless nickel immersion gold) PCB plating
      • Female GPIO header included

      The only assembly involved is the soldering of the GPIO header.

      Make sure the header is fitted in to the PCB with the main 'PROTOZERO' text on the underside like the image below:

      You should then solder the header from the top face of the PCB, ensuring the header is fitted to the outer GPIO section:

      The ProtoZero is a prototyping board for the Raspberry Pi Zero, that also fits the A , B and Pi2.
      R134.90  Inc VAT
      USB Over Ethernet Extender (usb over ethernet extender)
      Description:

      Need to send your Raspberry Pi USB signals over a long distance? You need one of these USB over Ethernet Booster sets! This USB booster allows you to connect a USB device to your Pi at a distance of up to 45 meters via the use of a Cat5e (or greater) RJ45 Ethernet Patch cable.

      The kit consists of two USB to RJ45 extension adapters, one male one female, and it's bus powered, so requires no external power! Works best on longer distances.

      USB Over Ethernet Booster Features:

      • USB Extension Adapter Pair
      • Extend USB signal up to 45 meters via RJ45 (CABLE NOT INCLUDED)
      • No additional drivers required - Plug n Play
      Need to send your Raspberry Pi USB signals over a longer distance?
      R139.90  Inc VAT
      USB Audio Input/Output Dongle black (USB sound black IN/OUT)
      Description:

      This nifty little USB pig-tail adds audio input and output through USB. It's a cheap and cheerful solution for audio input to your Raspberry Pi, and the short cable design means it plays nicely with the other USB ports on a Pi.

      After testing a wide range of USB audio dongles, this was the winner through being simple, low on noise and artefacts, and free from pointless buttons, bells, and whistles. The ferrite bead on the cable is a nice little extra.

      Usage

      In Raspbian, this device should show up in the audio control panel automagically (go to the Raspberry Pi menu, then Preferences, then Audio Device Settings, and select USB PnP Sound Device).

      We recommend providing a good signal to the input, as it provides no gain/boost for passive mics.

      Once you're up and running, record audio input on your Pi, in the terminal, by typing:
      arecord -D plughw:1 -f cd /tmp/recording.wav

      Add quality audio input output to your Raspberry Pi

      This nifty little USB pig-tail adds audio input and output through USB
      R139.90  Inc VAT
      Per Page      1 - 20 of 71