Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
R269.90  Inc VAT
R289.60
UNO R3 MEGA328P ATMEGA16U2 for Arduino Compatible (Uno Board DIP IC)

Arduino is an open-source electronics platform based on easy-to-use hardware and software. Arduino boards are able to read inputs - light on a sensor, a finger on a button, or a Twitter message - and turn it into an output - activating a motor, turning on an LED, publishing something online.

Find more info on Arduino at https://www.arduino.cc/en/guide/introduction

Description:

 Microcontroller ATmega328
Operating Voltage 5V
Input Voltage (recommended) 7-12V
Input Voltage (limits) 6-20V
Digital I/O Pins 14 (of which 6 provide PWM output)
Analog Input Pins 6
DC Current per I/O Pin 40 mA
DC Current for 3.3V Pin 50 mA
Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader
SRAM 2 KB (ATmega328)
EEPROM 1 KB (ATmega328)
Clock Speed 16 MHz
Length 68.6 mm
Width 53.4 mm

Package includes:

1 x UNO R3
1 x USB cable


R129.90  Inc VAT
Mega2560 + WiFi R3 ATmega2560+ESP8266 32Mb memory USB-TTL CH340G. Compatible for Arduino Mega NodeMCU For WeMos ESP8266 (Mega2560 + wifi)

Features:

Full integration on one board: Mega R3 ATmega2560 and WiFi ESP8266 with memory 32Mb (megabyte)
All of the modules can work together or each separately. And everyone has their own pinout headers
The convenient solution for the development of new projects requiring Uno and WiFi
Via USB you can update sketches and firmvare for ATmega2560 and for ESP8266. For this on board have the USB-serial converter CH340G
Use this board is very simple
The board has DIP-switch, to connect the modules
For example, to: USB and ATmeg2560, USB and ESP8266, ATmega2560 and ESP8266
 
Table DIP- Switch:
 
Connection                                                                                       DIP
ATmega2560<->ESP8266 
1            2           3             4           5             6              7
ON         ON        OFF       OFF          OFF        OFF          OFF
USB <->ATmega2560                               
OFF        OFF       ON        ON         OFF        OFF          OFF
USB<->ESP8266 (Update firmware or sketch)
OFF        OFF       OFF       OFF        ON         ON           ON
USB<->ESP8266 (communication)           
OFF        OFF       OFF       OFF        ON         ON           OFF
All independent                                       
OFF        OFF       OFF       OFF        OFF        OFF          OFF
 
Special solution:
USB <->ATmega328<-> ESP8266
                                                                                       DIP                                        SWITH 2
Connection                                        1       2       3      4      5         6           7
 
USB <-> ATmega2560<-> ESP8266    ON    ON    ON      ON   OFF    OFF      OFF          To RXD3/TXD3
 
 
USB converter CH340G connect to RX0/TX0 of ATmega2560
ESP8266 connect to RX3/TX3 of ATmega2560

Documents

Dimensional drawing

Dimensions MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USBDimensions MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USB

Pinout

Pinout MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USBPinout MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USB

Schematic

Schematic of MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USB

Drivers

Windows driver for MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USBLinux driver for MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USBMac OS driver for MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USBAndroid driver for MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USB

 
Package Contents:
1 x Mega + WiFi Board
R329.90  Inc VAT
Dual Experimental kit RPI and Uno (Dual experimental board kit)
PLEASE NOTE: RASPBERRY PI AND ARDUINO NOT INCLUDED

Description:

This is an Experimental Platform For Raspberry Pi 2/3 Model B and B+ and Arduino UNO R3
With Breadboard, Male to Female jumper cables,  T type 40Pin  GPIO, Ribbon Cable.

Package includes:

1 x Acrylic Platform (with Installation screws pack)
1 x Breadboard 800
10 x Male to Female jumper cables (Length: 25cm±2cm)
1 x T type 40Pin GPIO
1 x 40 pin ribbon Cable (20cm±2cm Length)
R369.90  Inc VAT
Geekcreit® UNO R3 Starter Kit (Uno Starter kit)

Type: No battery version

Features:


This is a upgraded version UNO R3 starter kit with more components
You'll learn through building several creative projects.
Starting from the basics of electronics to more complex projects, the kit will help you control the physical world with sensors and actuators.

Package includes:

1 x Arduino compatible UNO R3 development board
1 x USB cable
1 x Prototype extension board
1 x Mini breadboard
1 x 5V stepper motor
1 x 2003 stepper motor driver board
10 x Red LED
10 x Green LED
10 x Blue LED
2 x Vibration Sensors
1 x Flame sensor
1 x LM35 temperature sensor
1 x Infrared receiver (no battery included)
3 x Photoresistors
4 x Key caps
4 x Key switches
1 x Adjustable potentiometer
1 x Passive buzzer (piezo buzzer)
1 x Active buzzer (tone generator)
1 x Jumper cap
1 x Large breadboard
1 x Remote Control
1 x 1602 screen
1 x 9G servo
1 x 10p DuPont jumpers
30 x Breadboard jumpers(approximately)
1 x 220 ohm resistor
1 x 8*8 dot matrix
1 x One digit eight segment tube
1 x Four digit eight segment tube
1 x IC 74HC595
1 x Battery Holder
1 x 1K resistor plug
1 x 10K resistor plug
1 x 2.54mm 40pin pin header

We found some beginners guides that will help show you what the kit can do and get you started with your own tinkering.

Makerspace.com - https://www.makerspaces.com/simple-arduino-projects-beginners/
Starter kit for Arduino - https://www.elecrow.com/download/Starter%20Kit%20for%20Arduino(user%20manual).pdf

 

R599.90  Inc VAT
LCD module 3.5 inch TFT LCD display for Arduino UNO R3 Board and supports mega 2560 R3 (Arduino LCD display 3.5inch)
PLEASE NOTE: Arduino board and USB cable are not included

LCD module 3.5 inch TFT LCD screen 3.5 " for Arduino UNO R3 Board and support mega 2560 R3



Watch a video on this item at https://www.youtube.com/watch?v=PAPW97X6IRM
 


Package Includes:
 
 1 x 3.5 inch TFT LCD

View the Wiki pages
R229.90  Inc VAT
ABS Blocks Case Red for UNO R3 (Red Uno blocks case)

Features :

 

1. The cases can be stacked.

2. Made of high quality ABS plastic , provides good protection.

3. Available in red ,blue  and white.

4. Can be wall mounted.

5. Designed for UNO R3.

 

 

Specifications :

 

1. Material : ABS

2. Weight : 30 g approx

3. Size ( L x W x H ) : 80 x 60 x 20 mm approx

4. Colours : Red , Blue and White(See related products tab)

 

 

Package Includes :

1 x ABS Case for UNO R3

R99.90  Inc VAT
ABS Blocks Case Blue for UNO R3 (Blue Uno blocks case)

Features :

 

1. The cases can be stacked.

2. Made of high quality ABS plastic , provides good protection.

3. Available in red ,blue  and white.(See related products tab)

4. Can be wall mounted.

5. Designed for UNO R3.

 

 

Specifications :

 

1. Material : ABS

2. Weight : 30 g approx

3. Size ( L x W x H ) : 80 x 60 x 20 mm approx

4. Colours : Red , Blue and White

 

 

Package Includes :

1 x ABS Case for UNO R3

R89.90  Inc VAT
ABS Blocks Case White for UNO R3 (White Uno blocks case)

Features :

 

1. The cases can be stacked.

2. Made of high quality ABS plastic , provides good protection.

3. Available in red ,blue  and white.(See related products tab)

4. Can be wall mounted.

5. Designed for UNO R3.

 

 

Specifications :

 

1. Material : ABS

2. Weight : 30 g approx

3. Size ( L x W x H ) : 80 x 60 x 20 mm approx

4. Colours : Red , Blue and White

 

 

Package Includes :

1 x ABS Case for UNO R3

R59.90  Inc VAT
LCD Keypad Shield LCD1602 LCD 1602 Module Display For Arduino ATMEGA328 ATMEGA2560 raspberry pi UNO blue screen (buttons blue backlight)
Description
  •     This is a basic 16 character by 2 line display.   
  •     Utilizes the extremely common HD44780 parallel interface chipset.   
  •     Interface code is freely available.   
  •     Blue Backlight with white words.   
  •     uses 4 Bit Arduin LCD Library.   
  •     Size:8cm x 5.9cm - 3.15inch x 2.32inch   


Package Content:

1 X Keypad Shield 1602 LCD

DFRobot WIKI
R79.90  Inc VAT
USB A to USB B Arduino Uno/Mega USB cable 30cm (uno/mega cable 30cm)
Arduino Uno/Mega USB cable 30cm USB A to USB B Blue
R28.90  Inc VAT
CNC Kit With UNO + Shield + Stepper Motor DRV8825 Endstop A4988 GRBL (Uno full cnc kit)
The kit contains following items:

1x UNO R3+CH340G  Board. It's not  official board but it's compatible with all  software and hardware. Licensed under Creative Commons Attribution Share-Alike license.
1X 40" Gold plated/shielded USB cable w/noise suppressor. Essential for stable connection and printing.
1x CNC shield
3X Zyltech 1.5A 0.42 N.m stepper motors
3X Mechanical endstop switch w/ 40" cable
4x DRV8825 stepper motor driver (upgraded from A4988, 2.5 A max current/phase. It's not  official board but it's compatible with all  software and hardware. Licensed under Creative Commons Attribution Share-Alike license.
4x Aluminum heatsink with tape backing


Package includes:

1 x CNC Kit
R1,494.36  Inc VAT
Arduino starter kit - UNO (Arduino UNO kit)
This kit is a great way to start your arduino learning experience and includes the following:


You might also like our handy GET STARTED WITH ARDUINO book.

Need to make your UNO project more mobile? Have a look at our battery solutions:


We do also stock enclosures for the Arduino
R269.90  Inc VAT
R289.60
UNO R3 SMD (CH340G) MEGA328P for Arduino UNO R3 + USB CABLE ATMEGA328P-AU Development board (UNO SMD fixed IC)
Product introduction
UNO R3 is a microcontroller board based on the ATmega328P.

It has:
- 14 digital input/output pins (of which 6 can be used as PWM outputs)
- 6 analog inputs
- a 16 MHz quartz crystal
- a USB connection
- a power jack
- an ICSP header
- a reset button.

It contains everything needed to support the microcontroller. Simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.


Package Includes:

1 x Arduino Uno SMD
1 x Headers
1 x USB cable

Getting started with Arduino products
R99.90  Inc VAT
Acrylic Case Enclosure for Arduino UNO R3 - Transparent (Uno Clear Case)
Transparent Acrylic Clear Case For Arduino UNO R3

Features:


Material: Acrylic clear
For Arduino UNO R3 and compatibles
Assembly required

Package includes:

1 x DIY Acrylic Case with screws
R39.90  Inc VAT
Ethernet Shield W5100 R3 Support PoE For Arduino UNO Mega 2560 Nano (Arduino Ethernet R3)
Description:

With this Ethernet Shield, your Arduino board can be used to connect to the internet.
Can be used as server or client.
Directly plug puzzle board, no soldering required.
This is the latest version of the ethernet shield.
Fits all versions of Arduino main boards, 2009, UNO, mega 1280, mega 2560.
This Arduino Ethernet Shield which is based on the Wiznet W5100 ethernet chip gives you an easy way to get your Arduino online.

Specification:

Controller: w5100
Size: 7.4 x 5.4 x 2.4  (2.91 x 2.12 x 0.94inch)
MAC address: 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }


Feature:

It is directly supported by Arduino official Ethernet Library.
It adds a micro-SD card slot, which can be used to store files for serving over the network.
It is compatible with the Arduino Duemilanove (168 or 328), UNO as well as Mega (1280/2560) and can be accessed using the SD library.
The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP.
It supports up to four simultaneous socket connections.
Use the Ethernet library to write sketches which connect to the internet using the shield.

Package included:

1 x W5100 ethernet shield

Resources:
Overview
Wiki
R189.90  Inc VAT
WeMos® D1 R2 V2.1.0 WiFi Uno Module Based ESP8266 Arduino Nodemcu Compatible (Wemos V2 ESP Uno board)
Description:

11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)
1 analog input(3.3V max input)
Micro USB connection
9-24V power input jack.
Compatible with Arduino
Compatible with nodemcu

For more info go to http://www.wemos.cc/
Getting started with Arduino products

Package includes:

1 x WeMos D1 WiFi UNO ESP-12E Based ESP8266 Arduino Compatible
Arduino compatible
R129.90  Inc VAT
cnc shield v3 engraving machine 3D Printer board + 4pcs A4988 driver expansion board for Arduino UNO R3 with USB cable (uno cnc control kit)
Perfect for engravers, laser cutters, CNC machines and 3D printers. This shield simply sticks on top of your Arduino board and can control up to 4 stepper motors.

Features:
CNC Shield Board:
 
Latest CNC Shield Version 3.0 for Arduino.
GRBL 0.9 compatible. (Open source firmware that runs on an UNO for Arduino that turns G-code commands into stepper signals)
PWM Spindle and direction pins
4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a  full 4th axis with custom firmware using pins D12 and D13)
2 x End stops for each axis (6 in total)
Coolant enable
Uses removable A4988 or DRV8825 compatible stepper drivers
Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to  1/32 micro-stepping )
Compact design.
Stepper Motors can be connected with 4 pin molex connectors or soldered in place.
Runs on 12-36V DC. (At the moment only the DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
Please note that this is an unassembled kit and Basic soldering skills are needed.
 
A4988 Stepper Motor Driver:
 
A4988 Stepper Motor Driver Board is a breakout board for Allegro’s A4988 DMOS Micro stepping Driver with Translator and Overcurrent Protection; please read the A4988 datasheet carefully before using this product.
Low RDS (On) Output
Automatic current decay mode  detection / selection
Mix with slow current decay modes
Synchronous rectification for low power dissipation
Internal UVLO
Crossover-current protection
3.3 and 5 V compatible logic supply
Thermal shutdown circuitry
Ground fault protection
Load short-circuit protection
Five selectable step modes: full,  1/2, 1/4, 1/8 and 1/16
Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it is powered is asking for trouble).

Step 1: Download the GRBL HEX file https://github.com/gnea/grbl/releases/tag/v1.1f.20170801
Step 2: Download XLoader https://github.com/xinabox/xLoader
Step 3: Open XLoader and Load the HEX File downloaded in Step 1.
Step 4: Select the current Board - Uno(ATmega328) and COM port.
Step 5: Press Upload.
DONE!


Package Includes:
1 X cnc shield v3
4 X A4988
4 X Heatsink
1 X UNO R3
1 X USB cable
R339.90  Inc VAT
Arduino Uno to Raspberry Pi boards Adapter (Arduino to pi adapter board)

Description

This adapter board allows you to use the ABelectronics range of Raspberry Pi add-on boards with the Arduino Uno and other Arduino boards which use the same pin layout as the Uno design.

The adapter connects the pins on the UNO to the Raspberry Pi header and has a level shifter chip to translate the voltages used by our Raspberry Pi HAT style boards.

Solder jumpers are provided on the board so you can set the I2C bus to connect to either Arduino pins A4 and A5 or 16 and 17.

This kit contains the following items:

  • Adapter PCB Board
  • Header pins for the Arduino UNO or compatible board
  • Header pins for the Raspberry Pi GPIO header.

ABelectronics have code libraries for the Arduino platform available to download from https://www.abelectronics.co.uk/kb/article/32/arduino-library-and-demos

Note: this kit requires a soldering iron and solder to assemble.

The Arduino header pins need to be soldered from the top of the PCB board and the 2 rows of 20 pins headers need to be soldered from the bottom with the header pins on the top of the PCB boards to allow you to install the Raspberry Pi expansion boards.

R119.90  Inc VAT
Per Page      1 - 18 of 18
  • 1