Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
HDMI to VGA Converter - Black (NORMAL hdmi vga converter)

Description:

Pi ZERO USERS PLEASE NOTE: To the best of our knowledge this  type of converter draws too much power from the HDMI port to use on the  Raspberry pi ZERO. It could end up killing the ZERO.

No issues have been reported on the Pi3 with prolonged use.

This  is a HDMI to VGA convert which will allow you to convert your digital  HDMI output signal, into an analog signal. Perfect for hooking your Pi  up to a computer screen.

Specifications:

  • HDMI(Type A) to VGA(D-SUB)
  • Color: Black
  • HDMI Support: 1.3

Contents:

  • 1 x HDMI to VGA Converter
R119.90  Inc VAT
VGA to VGA Cable 1.5m (SVGA) (vga m2m 1.5m)
Description:

These 2m Super VGA High Resolution VGA Monitor Cables are designed to a provide high quality video connection for your Raspberry Pi, PC, Laptop,  Monitor or TV. The cable is constructed using 28AWG triple mini coaxial  cables which allows them to be used for extended distances. Triple  shielded with braid, foil and drain wire. Our cables are designed for  standard monitors and widescreen LCD’s that require DDC cable.

Specifications:
  • Tested for Compatibility with the Raspberry Pi
  • Premium 15 pin VGA/SVGA
  • Male to Male Cable
  • Quality cable to connect a VGA or SVGA device such as most monitors, projectors, KVM switches and some TVs, to a VGA / SVGA output on a computer.
  • 28AWG Triple Shielded
  • HD 15 - All Data Pins Connected
  • 1.5m Long
  • Black with Blue
Contents:
  • 1 x VGA to VGA Cable 1.5m
Resources:
  • If you have a VGA monitor, you'll need a HDMI to VGA adapter and a VGA Male to Male Cable to connect your Raspberry Pi.
  •  Pi ==> Adapter ==> VGA Cable ==> Monitor
R49.90  Inc VAT
camera module OV7670 Supports VGA CIF auto exposure control display active size 640X480 for Arduino (Arduino camera)
Description

OV7670 image sensor, small size, low operating voltage, and provides all the features of the single-chip VGA camera and image processor. Through the SCCB bus control, you can output the entire frame, sub-sampled, take the window way affect the data resolution of 8 bits. VGA image of the product is up to 30 frames / sec. Users can fully control the image quality, data format and transmission mode. The process of image processing functions including gamma curves, white balance, saturation, chroma, and so can be programmed through the SCCB interface. OmmiVision image sensor applications unique sensor technology to improve image quality by reducing or eliminating the optical or electronic defect, such as fixed pattern noise, tail-blooming, clear and stable color image.


    • Low voltage suitable for embedded applications
    • Standard SCCB interface compatible with I2C interface
    • RawRGB to RGB (GRB4: 2:2, RGB565/555/444), YUV (4:2:2) and YCbCr (4:2:2)output format
    • support VGA, CIF, and from CIF to 40x30 the size
    • VarioPixel subsampling way eliminate light stripes, automatic black level calibration image quality control including color saturation, hue, gamma, sharpness ANTI_BLOOM
    • ISP has eliminate noise and dead pixel compensation function
    • Support image scaling
    • The lens is the loss of light compensation
    • 50/60Hz detection
    • The saturation automatically adjust ( UV adjustment)
    • edge enhancement automatically adjust
    • Noise Reduction automatically adjust
Key parameters
  • photosensitive array 640X480
  • O voltage 2.5V to 3.0V ( internal LDO to core supplies ) the
  • power operation 60mW/15fpsVGAYUV
  • Sleep < 20 μ A
  • temperature operation from 0 ° C to 50 ° C
  • ( 8 -bit) output format ? YUV/YCbCr4 RGB565/555/444 GRB4: 2:2: 2:2 Raw RGB Data
  • Optical size of 1/6 "
  • field of view angle of 25 °
  • maximum Zhen rate 30fps VGA
  • Sensitivity 1.3V / (Lux-sec)
  • signal to noise ratio of 46 dB
  • dynamic range of 52 dB
  • browsing mode progressive
  • electronic exposure
  • area of 3.6 μ mx 3.6 μ m
  • dark current 12 mV / s at 60 ° C


Package Includes:

1 x camera board

Resources:

How to Use OV7670 Camera Module with Arduino
R59.90  Inc VAT
WAVGAT cnc shield v3 engraving machine / 3D Printer / A4988 driver expansion board for Arduino (cnc shield only)
Description:

The CNC Shield V3.0 allows you to build a engraving machine, 3D printer, mini CNC and other similar devices using your Arduino. It is designed as a shield and can plug on top of an Arduino requiring no external connections and wiring. There are 4 slots on the board for plugging in stepper motor drive module which can drive 1 stepper motor each. Controlling each step stepper motor requires only two IO pins on the Arduino. Just insert this Arduino CNC Shield V3.0 onto an Arduino UNO, and install the GRBL firmware, you can then quickly build a DIY CNC engraving machine. 



Features:

  • The extension board can be used for Small CNC routers, Carving Machine, 3D Printers, DIY Laser Cutters, and almost any project where you need to control a stepper motors with high precision
  • This shield allows you to control upto 4 stepper motors
  • Controller each stepper motor requires 2 IO Pins only, which saves a lot of IO Pins for other purposes
  • Arduino compatible
  • Latest Arduino CNC Shield Version 3.10
  • GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
  • Supports PWM Spindle and direction pins
  • 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
  • Supports Coolant enable
  • Supports removable A4988 compatible stepper drivers. (A4988, DRV8825 and others) (Not Included)
  • Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
  • Compact design.
  • Stepper Motors can be connected with 4 pin molex connectors or soldered in place.
  • Runs on 12-36V DC. (At the moment only the DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
  • Uses removable A4988 or DRV8825 compatible stepping driver.


What's in the box?

1 x CNC shield

Resources:

After installing the official IDE software please copy the 3 folders in the update folder to the following path:

C:\Users\Administrator\Documents\Arduino

Restart the software
Select the development board model
[Tools] -> [Board] -> WAVGAT UNO R3

Select COM port
[Tools] -> [Serial Port] -> Select the corresponding COM port

You can now use the development board

Download information:  https://drive.google.com/open?id=10gwrG9uTDwaEO-7EudsmBkfgdcyrcABI
R68.90  Inc VAT
Micro/Mini/Standard HDMI to VGA Adapter for RPi Zero/3/4 (HDMI VGA adapter kit)
Description:

Perfect solution for all HDMI devices that need to connect to VGA devices. This product is a portable digital-analog conversion line, defined through All  HDMI input sources. The HDMI to VGA Adapter allows for a connection to VGA monitors and projectors supporting a maximum resolution of 1920X1080

Widely used for: Computer / DVD / digital set-top box / laptop / mobile phone / digital camera / Table PC / media player / a range of HD sources such as input devices. Video signals to the TV / monitor / projector output. To solve a simple user operation of the display device connectivity solutions.

Specifications:

Flexible and functional
No external power supply needed, plug and play
Product resolution can be up to 720P/1080i/1080P
Input: HDMI Mini, HDMI Micro or HDMI
Output: VGA

Package  Includes:

1 x HDMI to VGA Cable (male to female LENGTH=20CM)
1 x Micro HDMI Male to HDMI Female Adapter
1 x Mini HDMI Male to HDMI Female Adapter
R144.90  Inc VAT
Mecer 19.5" 16 x 9 TFT LED Wide Monitor 1600 x 900 W/VGA HDMI & Built-in Speakers - Black (mecer 19.5 hdmi display )
Features:

- High performance intelligent multi-frequency scanning use active matrix Thin film transistor liquid crystal display (TFT), LED backlight
- Comply with VESA DPMS International Power Saving Regulation
- Support DDC 1/2B and Windows PNP Plug & Play
- Microprocessor based with OSD (On Screen Display) control, able to adjust the image to optimum
- Complying with International Standard (VESA) to mount the display on the wall

- 19.5" (49.53cm) 16:9 wide LED
- Resolution [email protected]
- Brightness 250cd/m²
- Viewing Angle 90°/65°(H/V)
- Net weight 2.14kgs
- Gross weight 3kgs
- Ultra slim


What's in the box?

1x LED monitor (with pedestal)
1x VGA signal cable
1x Audio cable
1x Power cord cable
1x User manual

R2,149.90  Inc VAT
R2,199.90
Pimoroni Pico VGA Demo Base (Pico VGA Demo Base)
Description:

Built especially to showcase the low cost, feature-rich RP2040 chip on the Raspberry Pi Pico, this board has VGA output, an SD card slot, digital I2S audio output, and more!

Based on the reference design by Raspberry Pi, our Pimoroni Pico VGA Demo Base is a great way to start experimenting with Raspberry Pi Pico/RP2040. It's the perfect way to demo of some of the fun things you can achieve with the RP2040 microcontroller such as generating a solid VGA output without taxing the CPU at all!

  • Amaze your friends by showing them you still own a D-sub cable!
  • Bask in the glory of 15-bit analog video!
  • Get teary eyed over the warm, authentic, RC filtered PWM audio!

This board will run the various video example programs that Raspberry Pi have put together to demonstrate features of the RP2040.

Please note that VGA Demo Base only currently works with the C/C Pico SDK!

A Raspberry Pi Pico is not included - click here if you'd like to buy one!

Your Pico will need to have male headers soldered to it (with the pins pointing downwards) to attach to our add-on boards.

Features

  • 15-pin VGA (D-sub) connector
  • PCM5100A DAC for line out audio over I2S (datasheet)
  • PWM audio output
  • SD card slot
  • Reset button
  • Female headers to install your Raspberry Pi Pico
  • Three user-controllable switches
  • Rubber feet
  • Compatible with Raspberry Pi Pico
  • No soldering required (as long as your Pico has header pins attached)
  • Programmable with C/C

Getting started

The pin-out of our board is the same as Raspberry Pi's reference board, you can find it in chapter 3 of Hardware Design with RP2040 along with more general info about the VGA reference board.

To run the audio and video examples in Raspberry Pi's experimental repos, first make sure you have up to date versions of pico-extras and pico-playground. When building the examples, you will need to specify the board configuration so that the examples use the correct pins. You can do this by creating a new build directory and then specifying the board definition when using cmake:

cmake -D"PICO_BOARD=vgaboard" ..

There's more details on about how to build applications with custom board configurations in Appendix D / page 267 of the C/C SDK documentation.

Pinout



R389.90  Inc VAT
Per Page      1 - 7 of 7
  • 1