Search
Search Criteria
Products meeting the search criteria
This brilliant Starter Kit is a perfect starting point to get you up and running with your RPI Zero Wireless so you can get Playing / Making/ Prototyping etc ASAP.
The Kit includes:
- Raspberry Pi Zero Wireless
- 16GB preloaded Sandisk micro SD card(NOOBS)
- Zero adapter kit(Black)
- Official Raspberry Pi Zero Red & White Case
- Raspberry Pi official Power Supply 2.5A (black)
Raspberry Pi Operating System Downloads: https://www.raspberrypi.org/downloads/
Getting Started with Raspberry Pi
The Raspberry Pi Zero WH has landed at PiShop! The Raspberry Pi Zero is an ultra low cost and ultra small variant of the original Raspberry Pi. It's tiny, measuring just 65mm x 30mm, and is perfectly designed for embedded applications, wearables, prototyping and any other Pi based tinkering you can think of, on a micro scale! The Raspberry Pi Zero Wireless features on board Wireless Internet & Bluetooth for all your connectivity needs!
The Raspberry Pi Zero features a BCM2835 chipset, overclocked to 1Ghz with 512MB RAM, and the same 1080p video output, so there's plenty of oomph in that little board. It also features the same 40 pin GPIO layout as the Raspberry Pi 2/B+/A+, with a pre-soldered male header. With it's small form factor and reduction in connectors, the Raspberry Pi Zero only uses ~ 140mA at 5V!
Unlike it's larger brothers and sisters, the Raspberry Pi Zero has an unpopulated composite (RCA) header and an unpopulated reset header. There's also no DSI screen port, no ethernet, no analogue audio and no full sized USB ports. Instead, the Pi Zero features a micro-USB power port, a micro USB OTG host port (for peripherals e.g. WiFi dongle), and a mini HDMI port for video.
HAT Compatibility Note: The Pi Zero is fully compatible with all HAT breakout boards, as it features the same 40 Pin GPIO as the Raspberry Pi 2/B+/A+
Raspberry Pi Zero Wireless Features:
- BCM2835 chipset, Overclocked to 1Ghz
- 512MB RAM
- Tiny Form Factor: 65mm x 30mm x 5mm
- Fully HAT compatible
- 40pin GPIO with pre-soldered header
- Stream and watch Hi-definition video output at 1080P
- Micro SD Slot for OS
- Tiny Current Draw ~ 140mA at 5V!
- Mini-HDMI for Video
- Micro-USB OTG Host for Data
- Micro-USB for Power
- Micro-CSI Camera Port
- On-Board WiFi
- On-Board Bluetooth
Raspberry Pi Operating System Downloads: https://www.raspberrypi.org/downloads/
Getting Started with Raspberry Pi
This brilliant Starter Kit is a perfect starting point to get you up and running with your RPI Zero Wireless H so you can get Playing / Making/ Prototyping etc ASAP.
The Kit includes:
- Raspberry Pi Zero WH (presoldered header)
- 16GB preloaded Sandisk micro SD card(NOOBS)
- Zero adapter kit(Black)
- Official Raspberry Pi Zero Red & White Case
- Raspberry Pi official Power Supply 2.5A (black)
Getting Started with Raspberry Pi
Get started with the Raspberry Pi with this pre-boxed Media kit
These kits are perfect for beginners that are just getting exposed to the Raspberry Pi, Media enthusiasts looking to stream online content with Kodi, developers looking to exploit the many advantages of the RPI's GPIO pins and anybody looking to get some cool goodies at a great price! They contain all of the essential hardware that you need to get up and running in no time.
The kit
- The Iconic Raspberry Pi 3 Model B+
- An Official Raspberry Pi 5V 2.5A Power Supply in Black
- A 0.5m HDMI cable
- A 16 GB Sandisk Micro SD card with the latest version of NOOBS pre-installed. Just Select LibreEelec on start up and wait for KODI to install directly from the micro SD card OR select Raspbian to create your own Debian desktop for your other projects.
- The T16 wireless mini keyboard with trackpad to make searching much easier.
- A Black one nine design case - the favorite choice to
use around your flat screen TV as the stunning Black Case matches most mediacenter appliances - Loads of addons available for KODI. Do a Google search for "best kodi addons"
To learn more about KODI: https://kodi.tv/
and the Wiki: https://en.wikipedia.org/wiki/Kodi_(software)
Getting Started with Raspberry Pi
Get started with the Raspberry Pi with this pre-boxed Media kit
These kits are perfect for beginners that are just getting exposed to the Raspberry Pi, Media enthusiasts looking to stream online content with Kodi, developers looking to exploit the many advantages of the RPI's GPIO pins and anybody looking to get some cool goodies at a great price! They contain all of the essential hardware that you need to get up and running in no time.
The kit
- The Iconic Raspberry Pi 3 Model B+
- An Official Raspberry Pi 5V 2.5A Power Supply in White
- A 0.5m HDMI cable
- A 16 GB Sandisk Micro SD card with the latest version of NOOBS pre-installed. Just Select LibreEelec on start up and wait for KODI to install directly from the micro SD card OR select Raspbian to create your own Debian desktop for your other projects.
- The White T16 wireless mini keyboard with trackpad to make searching much easier.
- An Official Red/White case
- Loads of addons available for KODI. Do a Google search for "best kodi addons"
To learn more about KODI: https://kodi.tv/
and the Wiki: https://en.wikipedia.org/wiki/Kodi_(software)
Getting Started with Raspberry Pi
Maximum 1 Unit Per Order. If you require Raspberry Pi Zero Wireless in bulk, we allow quantity purchases of the Raspberry Pi Zero Wireless with pre-soldered headers!
The Brand New Raspberry Pi Zero Wireless has landed at PiShop! The Raspberry Pi Zero is an ultra low cost and ultra small variant of the original Raspberry Pi. It's tiny, measuring just 65mm x 30mm, and is perfectly designed for embedded applications, wearables, prototyping and any other Pi based tinkering you can think of, on a micro scale! The Raspberry Pi Zero Wireless features on board Wireless Internet & Bluetooth for all your connectivity needs!
The Raspberry Pi Zero features a BCM2835 chipset, overclocked to 1Ghz with 512MB RAM, and the same 1080p video output, so there's plenty of oomph in that little board. It also features the same 40 pin GPIO layout as the Raspberry Pi 2/B+/A+, which you'll need to solder your own headers to. With it's small form factor and reduction in connectors, the Raspberry Pi Zero only uses ~ 140mA at 5V!
Unlike it's larger brothers and sisters, the Raspberry Pi Zero has an unpopulated GPIO, unpopulated composite (RCA) header and an unpopulated reset header. There's also no DSI screen port, no ethernet, no analogue audio and no full sized USB ports. Instead, the Pi Zero features a micro-USB power port, a micro USB OTG host port (for peripherals e.g. WiFi dongle), and a mini HDMI port for video.
HAT Compatibility Note: The Pi Zero is fully compatible with all HAT breakout boards, as it features the same 40 Pin GPIO as the Raspberry Pi 2/B+/A+
Raspberry Pi Zero Wireless Features:
- BCM2835 chipset, Overclocked to 1Ghz
- 512MB RAM
- Tiny Form Factor: 65mm x 30mm x 5mm
- Fully HAT compatible
- 40pin GPIO (Unpopulated)
- Stream and watch Hi-definition video output at 1080P
- Micro SD Slot for OS
- Tiny Current Draw ~ 140mA at 5V!
- Mini-HDMI for Video
- Micro-USB OTG Host for Data
- Micro-USB for Power
- Micro-CSI Camera Port
- On-Board WiFi
- On-Board Bluetooth
Raspberry Pi Operating System Downloads: https://www.raspberrypi.org/downloads/
Getting Started with Raspberry Pi
The official raspberry pi wifi dongle is here! The RPi Foundation claim: "In our tests, this dongle has performed significantly better than many others on the market, with stronger WiFi reception and better reliability."
This tiny wireless adapter is easy to use and easy to set up. If you are tired of dealing with all those messy wires to connect your Raspberry Pi to your network then this is the item you need. It's also got the Raspberry Pi Foundation's logo embossed!
It also works as a wireless access point, handy for configuring your Pi on the go.
- 802.11 b/g/n
- USB 2.0
- BCM43143 Chipset
- 150Mbps maximum throughput
- Supports Access Point/Infrastructure mode
- Works with Raspbian out of the box
- Instructions for Windows 10 IoT - http://ms-iot.github.io/content/en-US/win10/SetupWiFi.htm
(Please note that you may need drivers for other operating systems)
Description:
Logitech MK220 Wireless USB Combo Desktop - Keyboard & Mouse Retail Box
The Logitech MK220 Wireless Combo Keyboard and Mouse is about 36% smaller than standard keyboards but still has all the standard keys—so doing the things you love is as easy as ever. This wireless Keyboard and Mouse combo is a complete package that offers fast typing and faster navigation, With keys that barely make a sound, extended battery life and reliable, long-range wireless connection. The keyboard’s minimalist design not only blends in with your décor—it serves a purpose. No extra space between the keys makes it compact as well as sleek. The reliable Advanced 2.4 GHz wireless connection lets you work or play up to 10 meters (33 feet) away with virtually no delays or dropouts. So you can work or play in more places—like your comfy couch or control your computer from across the room, the wireless connection virtually eliminates delays, dropouts and interference and gives you a range of up to 10 meters (33 feet).You can go for months without battery hassles—24 months for the keyboard and 5 months for the mouse. Setup on the Logitech MK220 Wireless Combo Keyboard and Mouse couldn’t be easier—you simply plug the wireless receiver into a USB port on your computer and start tweeting, blogging right away without software and without the clutter of cords.
Specifications:
- Advanced 2.4 GHz wireless
- Plug & Play
- Compact Design
- Sleek, minimalist design
- Whisper-quiet keys
- 128-bit AES encryption
Works with:
- Windows XP, Windows Vista, Windows 7 or Linux kernel 2.6 or later
- Requires USB 2.0 port
Features
- Much smaller design, same keys
The compact keyboard is about 36% smaller than standard keyboards but still has all the standard keys—so doing the things you love is as easy as ever. - Advanced 2.4 GHz wireless
So you can work or play in more places—like your comfy couch—the wireless connection virtually eliminates delays, dropouts and interference and gives you a range of up to 10 meters (33 feet).*
*Wireless range may vary due to environmental and computing conditions. - 128-bit AES encryption
It helps protect your information by encrypting data transfer between the keyboard and receiver with one of the highest levels of data encryption available. - Fewer battery hassles
A 24-month keyboard and 5-month mouse battery life mean you can go for months without the hassle of changing batteries.**
**Works with Windows-based PCs. (Battery life may vary based on user and computing conditions. - Sleek, minimalist design
The keyboard’s minimalist design not only blends in with your décor—it serves a purpose. No extra space between the keys makes it compact as well as sleek. - Plug-and-play simplicity
Setup couldn’t be easier—you simply plug the wireless receiver into a USB port on your computer and start tweeting, blogging right away without software.
Contents:
- Keyboard
- Mouse
- USB receiver
- 2 AAA (keyboard) and 1 AA (mouse) batteries
- User documentation
Description:
Wireless USB PC Generic IR Remote Controller
Tested with OSMC and OpenELEC versions of Kodi
Plug directly into the USB port of your Raspberry Pi.
Specifications:
- Tested for Compatibility with the Raspberry Pi
- Colour: Black
- Connector Type: USB
Contents:
- 1 X USB PC IR Remote Controller
- 1 X USB receiver
- 1 X User Manual
Description:
This is a 433Mhz RF transmitter with receiver kit for Arduino ARM MCU wireless
Application environment:
Remote control switch, receiver module, motorcycles, automobile anti-theft products, home security products, electric doors, shutter doors, windows, remote control socket, remote control LED, remote audio remote control electric doors, garage door remote control, remote control retractable doors, remote volume gate, pan doors, remote control door opener, door closing device control system, remote control curtains, alarm host, alarm, remote control motorcycle remote control electric cars, remote control MP3.
Specifications:
Receiver module:
Product Model: XD-RF-5V
Operating voltage: DC5V
Quiescent Current: 4MA
Receiving frequency: 433.92MHZ
Receiver sensitivity: -105DB
Size:30x14x7mm
Transmitter:
Product Model: XD-FST
Launch distance :20-200 meters (different voltage, different results)
Operating voltage :3.5-12V
Dimensions: 19 * 19mm
Operating mode: AM
Transfer rate: 4KB / S
Transmitting power: 10mW
Transmitting frequency: 433M
Pinout from left → right: (DATA; VCC; GND)
Package includes:
1 x Receiver module
1 x Transmitter
Configure and read a 433Mhz RF Transmitter With Receiver on the Raspberry Pi
This GSM gate opener features remote on/off switching by authorized free phone calls, which can be operated from anywhere, no distance limit, very convenient.
Features:
*850/900/1800/1900MHz quad bands, can work in the worldwide GSM networks.
*No call charges. The GSM Relay Switch answers the call from authorized number then carries out the turn ON/OFF action on the first 'ring'.
*Secure - Using caller-ID for identification, unknown callers are ignored.
*Add or remove users by SMS Text command.
*No need to provide a remote control or keys for different users.
*Up to 200 authorized phone numbers can be configured at the specified time.
*The relay action will return a SMS confirmation to the owner or authorized caller number, this function is editabled by user.
*The relay close or open time is programmable.
*Multiple applications. (Gates, bollards, barriers, garage doors, shutters and access doors or machines).
> Remote open/close swing/sliding gates, doors,
shutters, garage doors,locks with a free call!
> Residential: Door,gate,garage access control, electronic
fan,microwave,air-conditioner control.
> Industry: Remote switch equipment, for example: street lights,
solar power, motor, inverter, PLC,pumps, fans, etc.
> Agriculture: Remote control pumps, etc.
> Business: Remote control electronic boxes,bright billboards,LED signs,etc.
How it works?
A) Wire the RTU5024 Gate opener with your door locks or other machines.
B) Insert SIM card to RTU5024 Gate Opener, Power up.
C) Send a few SMS commands to RTU5024 Gate opener, to assign the authorized user list.
D) Make a phone call from the authorized user's phone number, RTU5024 Gate Opener rejects
phone call and door open or close.
For example,If you are using the RTU5024 GSM gate opener to open/close your garage door by
your family members, what you'll need is just 2~5 SMS commands only.
Functions: Swing Gate, Sliding Door, Garage Door Locks
GSM Frequency:850/900/1800/1900MHz
Output Relay:NC/NO dry contact,3A/240VAC
Power Consumption:12V input Max.50Ma/Standby:15mA
SIM Card:Support 3V SIM Card
Antenna: 50 Ω SMA Antenna interface
Temperature range :-20~+60 °C
Humidity range:Relative humidity 90%
2 x cable connectors
Manual available at http://www.waferlife.com/downloads/RTU5024-manual.pdf
Resources:
Wikipedia
espressif resources
It is a learning code wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the transmitter. It has 4 Relays which can make the equipment turn or reverse, on/off and so on come true. The volume is small and the performance is stable and reliable, high receive sensitivity.
1. It covers application ranging from simple domestic remote control to autonomous control, like auto door, window, lifting equipment, entrance access, up and down controller, alarm system industrial control and security etc.
2. These remote controls are designed to control a wide variety of electronic devices with a wireless signal.
3. Extremely easy to set up and use.
4. Compatible with 2262 / 2260 / 1527 / 2240 etc chip and several code wireless remote control. So it can meet someone's need of choosing the wireless remote control as they like to work with it .
Instructions:
1. Press the learning code, the indicator flash, loosen your finger, press any button of the remote control, the indicator flash 2 times and off, it means you learn it successfully .
2. It can learn more than 12 PCS 2262 or 1527 chip with the different code wireless remote control.
3. remove/clean: press the learning button about 8 seconds , the indicator turn on to off, it means the information that you keep have been removed successfully.
Output working way:
1. Self-lock: connect the JP1 with the cutting out cap.
2. Jog: the cutting-out cap is non-occupation, JP1 and JP2 do not connect either.
3. Inter-lock: Connect the Jp2 with the Cutting out cap,
Jog: press one button is ON, loosen your finger on the same button is OFF (need one channel switch and one buttons remote control).
Self -lock: press one button for one time is ON, press the same button again is OFF (need one channel switch and one buttons remote control).
Inter-lock: press one button is ON, press another button is OFF (need one channel switch and 2 buttons remote control).
Receiver:
1. Working voltage: DC12V
2. Quiescent condition: Less than 6mA
3. Working temperature: -40°c+80°c
4. Receiver sensitivity: more than -105dBm
5. Working frequency: 433mhz
6. Output voltage: DC and AC is optional
7. Output current: Less than 3A
8. Max load current: 10A
9. Dimensions: 72 x 52 x 26mm
Remote control transmitter:
1. Remote Distance: 200M
2. Operating Voltage: DC 12V
3. Frequency: 433mhz
4. Operating Current: 13 mAh
5. Code Type: Fixed code / Learning code
6. Dimensions: 58 x 39 x 14mm
Relay ratings:
DC 14V 20A or AC 125V 20A
Package included:
2 x Transimitter
1 x Receiver
| Model | T16 |
| Color | Black |
| Size | 14.9*10.7*1.8cm(L*W*H) |
| Connection Mode | 2.4GHZ Technology |
| Interface | USB 2.0 |
| Remote Control Distance | 25m |
| Working Voltage | 3V |
| Working Current | 50mA |
| Battery | Rechargeable Li Battery |
| Backlight Colors | Blue |
| Plug and Play | Support |
| Operating System | Android/Windows Systems (Windows XP/Windows Vista, Windows CE, Windows 7, Windows 8) |
| Compatible Devices | Android TV Box, Google TV Box, Xbox 360, Smart TV, Windows PC, HTPC |
Package includes:
.... with a 1200 dpi BlueEye engine NX-7000 is easy to use anywhere, even on a granite countertop, wood table, carpet or sofa. The contoured shape design is suitable for either hand and is comfortable for all-day use. When you are on the go, you can store the receiver in the bottom of the mouse. The universal pico receiver allows to connect to other compatible Genius mouse models.
features:
- 2.4Ghz wireless mouse
- 1200 dpi BlueEye sensor for smooth movement control
- universal USB Pico receiver
- power switch extends battery life
- contoured shape great for either hand
system requirements:
- Windows 7/8 or above,
- Mac OSX 10.4+ or above
- available USB Port
package content:
- NX-7000
- USB Pico receiver
- AA Alkaline battery
- quick guide
specifications:
- interface: USB
- RF frequency 2.4GHz
- three buttons: left, right, middle button with scroll
- resolution: 1200 dpi BlueEye engine
- battery: 1x AA
- dimension: 100x58x39 mm
- package size: 90x41x132 mm
- body Weight: 55g
- pcs./ctn.: 40
This product does not supply any instructions, please reference the description.
This version does not support copy code function, please note about this before you order it.
Feature:
Voltage: 6V
Working frequency: 433mhz
Extremely easy to set up and use
Copies most radio frequency fixed code remote controls
Learning face to face in seconds
Only copy of a fixed code, can not be copied rolling code
Covers application ranging from simple domestic remote control to autonomous control, including car alarms, home alarms, panic buttons, garage door, rolling curtain, etc.
Compatible with 2262 / 2260 / 1527 / 2240 etc chip and several code wireless remote control. So it can meet someone's need of choosing the wireless remote control as they like to work with it .
Note: Use for 1012323
Package included:
1 x Transmitter
Home automation is "The Internet of Things". It simply means the way all devices or appliances are networked together to provide customers with seamless control over their home equipment.
Users can instantly convert any plug into a smart outlet with a convenient timer function that works on the user's smartphone. You can turn on/off any connected device either on the APP eWeLink or by pressing the manual control knob. This makes it perfect to control lighting and other home appliances.
The APP eWeLink enables you to control all your smart devices from anywhere at any time. The iOS version of the application can be downloaded in App Store and the Android version in Google Play.
Features:
Easy installation, easy handling.
Can be activated immediately.
Support WiFi network.
Support Automatic Configure net technology, easy access to settings.
Support status checking on APP
Support single/repeat/countdown timing tasks.
Support Max 150 WiFi smart sockets from one smartphone.
Support echo and dot of Alexa
Specifications:
EU plug
Power input: 10A, 90-250V
Max power: 2000W (resistive load)
Shell material: Retardant PC
Wireless standard: 802.11.b/g/n
Encryption: WEP/TKIP/AES
Security mechanism: WEP/WPA-PSK/WPA2-PSK/WPA/WPA2/WAPI/WPS2
Operating temperature: 0ºC-40ºC(32°F-104°F)
Operating Humidity: 5%-90%RH, Non-condensing
Package includes:
1 x SONOFF® S20 10A 2200W Wifi Wireless Remote Control Socket
Sonoff 4CH is an ESP8285 based 4 channel (4-gang) din rail mounting WiFi switch.
Sonoff 4CH supports to connect and control 4 home appliances, which can be turned on/off separately by the buttons or iOS and Android APP EweLink. Owning a Sonoff 4CH means you have 4 Sonoff basic WiFi switches integrate together.
The enclosure is din rail mount supported! A DIN rail is a metal rail of a standard type widely used for mounting circuit breakers and industrial control equipment inside equipment racks. These products are typically made from cold rolled carbon steel sheet with a zinc-plated or chromated bright surface finish.
Sonoff 4CH belongs to Sonoff family, definitely, it bears all the functions basic Sonoff has. In EweLink, you can remote turn on/off from anywhere at any time, set single/repeat/countdown timing schedules to turn on/off at a specified time, share to others so that they can control together.
Sonoff 4CH is hacker-friendly that you can flash your firmware without difficulty.
After accessing to Google Nest, e-WeLink can receive real-time environment data like temperature, humidity from Google Nest, as well as checking if there is anybody home or not. All these can be used to create smart scene to control e-WeLink supported Sonoff devices.
Support independently turn on/off 4 home appliances
Support to control home appliances by local toggle buttons or APP
Support tracking device status and timely remote control through APP
Support countdown timing and schedule timing
Support one-key sharing device to other user
Specifications:
Material: Plastic + Electronic elements
Color: Light Beige
Input: AC 90V-250V ( 50/60Hz)
Max Current: 10A
Max Power: 2200W
Power Load: 2.5KW/Gang; total 2.5KW
WIFI: IEEE 802.11 b/g/n
Wireless Frequency: 2.4Ghz
Humidity: 5%-95%
Working Temp: 20-75
Max soldering temperature: 260
Size: 145 x 90 x 40mm
Note:
Please allow 1-3cm errors to the actual dimensions due to manual measurement! Thank you !
Real color may slightly differ from pictures due to computer screen's resolution, brightness, contrast etc.
Package Includes:
1 x Sonoff 4CH Smart WIFI Switch
Easy to use.
Operating Voltage: DC12V
Maximum Load: 10A
Operating Frequency: 433MHZ
Receiver Sensitivity: -100dBm
Encoding Type: learning code
Board Size: Approx. 5.3x3.1cm/ 2.09x1.22"
Relay rating:
- 10A 250VAC
- 10A 125VAC
- 10A 30VDC
- 10A 28VDC
To check compatibility of a new remote with the receiver. Simply press the button on the remote, if the receiver flashes, but does not Triger the relay. The remote will be compatible, and you can start the programing process
To add a remote, press the button on receiver momentarily. The red light will come on. Then press the button on the remote that you want to program in. The red light will start flashing. After 4 flashes in will stop, and the button will be programmed in.
For the setting to take effect, the board needs to be disconnected from it’s power supply. The bellow settings will be done to the 3 headers and bridge pin on the receiver board, above the push button.
- With the header removed, the On button will switch the relay on, and the off button will in turn switch the relay off.
- With the header on Pin 1-2. Both Buttons will become momentary. And only hold the relay in place as long as they are pressed in.
- With the header on Pin 2-3. Each button will be able to switch the relay on and off individually. You will however not be able to switch the button off with the “off” button, if you switched it on with the “on” button. And vise versa.
Package Includes:
1 x Learning Code Receiver Relay
1 x Remote Control
Sonoff 4CH Pro R2 is 4 gang WiFi switches. They support switching among 3 working modes: interlock/self-locking/inching mode. 4CH Pro R2 supports to set 1-16s. (4CH Pro just supports to set 0.25-4s). This feature allows you to let your switch turn on for a few seconds then goes off, which works like a pulse switch. They integrate with a 433MHz RF receiver module, making them possible to be controlled by RF Remote. The Sonoff 4CH Pro smart switch is DIN Rail mounted.
Users can remotely turn on/off the connected lights/appliances by iOS/Android App eWeLink or 433MHz RF Remote. They can create 8 enabled single/repeat/countdown timers to automatically turn on/off at the specified time. The timers can run themselves even when the network is unavailable. To let the devices be controlled by their family, users can simply share the devices with their accounts and allow specified timers permissions. They can even create some scenes or smart scenes to trigger ON/OFF the switch.
Works With Amazon Alexa:
You can ask Alexa to turn on/off Sonoff 4CH Pro (R2).
Standard voice control commands phrases (if you just say the device name, Alexa will turn on/off all the 4 gangs immediately):
Alexa, turn on {deviceName}
Alexa, turn off {deviceName}
Alexa, turn on {deviceName} {gangName}
Alexa, turn off {deviceName} {gangName}
The default names for the 4 gangs are: outlet 1, outlet 2, outlet 3, outlet 4. You can change the name if you like.
Explanation: if the device name of your Sonoff 4CH is "My Switch", the gang name is "Outlet 1", then you can control with "Alexa, turn on My Switch Outlet 1".
For a detailed tutorial, please click https://www.itead.cc/blog/ewelink-works-with-alexa-tutorial.
Features:
Remote ON/OFF–Turn electrical devices on/off from anywhere
App Support –Free iOS and Android mobile App eWeLink
RF Remote control–Turn on/off by 433MHz RF Remote indoors
Independent control–Control each gang separately
3 Working Modes– Switch among interlock/self-locking/inching modes
Adjustable Delay Time– Turn on devices for 1-16s in Inching mode
DIN Rail Mounted– Great for industrial control
Sync Status–Real-time device status provided to App
Timing–Set scheduled/countdown timers to turn on/off at a specified time
Share Control– Control your smart home together with your family
Scene–Turn on/off a gang of devices with one tap
Smart Scene–Triggered on/off by temp, hum or other environmental conditions from the sensor
Compatibility –Works perfectly with Amazon Alexa, Google Assistant, IFTTT, Google Nest
Specifications:
Voltage Range: 90-250V AC(50/60Hz) / 5-24V DC
Max Current: 10A/gang
Max Power: 2200W/gang
Wireless Frequency: WiFi 2.4GHz
Wireless Standard: 802.11 b/g/n & 433MHz
Security Mechanism: WPA-PSK/WPA2-PSK
Enclosure Material: Fire-retardant ABS V0
Gang: 4
Dimension:145*90*40 (mm)
Operating Temperature(recommended): 0ºC-40ºC(32°F-104°F)
Operating Humidity: 5%-90%RH, Non-condensing
Certification: CE/RoHS (Download), FCC(Download)
Package includes: