Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
Coming soon. Pricing is currently estimated. Please login to your account and add this product to your wishlist to be notified when stock arrives.
R229.90  Inc VAT
Coming Soon. Login and add this item to your wishlist to be notified when stock arrives. Pricing is estimated at this stage.
R40.55  Inc VAT
R679.90  Inc VAT
R699.50
The Raspberry Pi Zero comes equipped with a special mini camera port which is smaller than the standard camera connector
R49.90  Inc VAT
The Official Raspberry Pi Zero & Zero Wireless Case is now available!
R79.90  Inc VAT
This Pi Zero USB Adaptor converts the Zero's Micro USB B Port to a full sized USB A port
R19.90  Inc VAT
Protect your Pi Zero W in style with the Pibow Zero W case, in beautiful berry colours - red, purple, and blue!
R85.64  Inc VAT
R109.90
Convert your Pi Zero or Pi Zero W into a convenient USB dongle.
R129.90  Inc VAT
R34.90  Inc VAT
This addon board connects to a Raspberry Pi Zero (RPi0) or Zero W (Wireless) via pogo pins to provide a full sized, USB Type-A dongle
R209.90  Inc VAT
160° variable focus – Camera Module for Raspberry Pi Zero (5MP) (160 focus zero cam)
Description

This Raspberry Pi Zero camera features a wide 160° fisheye lens and uses the same OV5647 chip as the standard Raspberry Pi camera! It's therefore able to deliver a crystal clear 5MP resolution image, or 1080p HD video recording at 30fps!

Specifications

  • CSI camera port works with Raspberry Pi Zero
  • Raspberry Pi Camera, supports all revisions of the Pi
  • OV5647 sensor 5MP 2592x1944 pixels
  • CCD size : 1/4inch
  • Focal Length : 2.1mm, f2.0 Lens
  • Field of View : 160 degree (while other normal cameras are typically 72 degree)
  • Sensor best resolution : 1080p
  • Support 1080p/30fps, 720p/60fps and 480p/90fps video record
  • Dimensions: 60mm × 11.5mm × 10.5mm

What'sin the box?

1 x Camera module 

Support

Please download the camera user guide  here.
Coming soon. Pricing is currently estimated. Please login to your account and add this product to your wishlist to be notified when stock arrives.
R229.90  Inc VAT
Official Mini HDMI Male to Standard HDMI Female Cable 10CM White for Zero (mini hdmi adapter 10cm)
Description:

Already have a standard HDMI cable? This handy adapter is what you need to connect to your Raspberry Pi Zero mini HDMI adapter.

What's in the box?

1 x 10cm mini HDMI adapter
Coming Soon. Login and add this item to your wishlist to be notified when stock arrives. Pricing is estimated at this stage.
R40.55  Inc VAT
Zero Adapter Kit With Official Raspberry Pi Adapters (Zero official adapter kit)
Description:

This adapter kit was created for the Raspberry Pi Zero. It includes all the adapters you need to get your Raspberry pi Zero going.

What's in the box?

1 x pin header 2x20
1 x Official Raspberry Pi male mini HDMI to female HDMI adapter
1 x Official Raspberry Pi OTG male micro USB to female USB A adapter
R39.90  Inc VAT
Raspberry Pi Zero 2 W All In One Kit with OTG (Zero2W All in one kit)
Description:

This Starter Kit is a perfect starting point to get you up and running with your RPI Zero so you can get Playing/Making/Prototyping etc ASAP.

What's in the box:

Resources:

Getting Started with Raspberry Pi
More on Raspberry Pi OS


R1,099.90  Inc VAT
R1,154.20
Raspberry Pi Zero 2 W Essentials Kit (Zero2W Ess kit)

This Starter Kit is a perfect starting point to get you up and running with your RPI Zero so you can get Playing/Making/Prototyping etc ASAP.

The Kit includes:


Getting Started with Raspberry Pi

More on Raspberry Pi OS


R679.90  Inc VAT
R699.50
Raspberry Pi Zero Camera Cable - 150mm (zero cam cable 150mm)

Description:

The Raspberry Pi Zero comes equipped with a special mini camera port which is smaller than the standard connector for the Raspberry Pi Camera and Noir Camera! So how do you connect to it? With this special camera cable designed specifically for the Raspberry Pi Zero of course! This is an extra long version, with a 150mm total length!

Just plug it into your Pi Zero's camera port and then the other end into one of the official Pi Cameras for photo & video fun time!

Specifications:

- Length: 150 mm
- Product Dimensions: 150.0mm x 16.0mm x 0.2mm
- Made to fit: Raspberry Pi Zero
- Pins: 15


What's in the box:

1 x Raspberry Pi Zero Camera Cable

The Raspberry Pi Zero comes equipped with a special mini camera port which is smaller than the standard camera connector
R49.90  Inc VAT
Official Raspberry Pi Zero Red & White Case (zero official case red/white)

Description:

The Official Raspberry Pi Zero & Zero Wireless Case is now available! Specially made and beautifully crafted in red & white, this nifty and tactile snap-together case is designed to protect your Zero!

The case comes with three swappable lids, each with a different function:

  • Raspberry Pi Camera lens holder lid with included extra short 35mm Raspberry Pi Zero camera cable(This cover is for the normal Raspberry Pi camera. The zero camera lens is to small to fit snugly.)
  • GPIO access lid, with GPIO hole for all your hacking needs
  • Solid lid, for those who want an all around protected Zero!

The Official Raspberry Pi Zero Red & White Case Features:

  • Fabulous Raspberry Red and White Colour Combination
  • 2 Part "Snap-Fit" Enclousure, with 3 separate lids (GPIO/Camera/Solid)
  • Underside slot for GPIO access
  • Cut-outs for all connection points
  • No SD card access (keeps your card protected!)
  • Included 4 x Stick on rubber feet for case stability
Please note:
Some mini-HDMI cables will need to have their shroud's cut down to fit the official case.


What's in the box:

1 x Raspberry Pi Zero Red & White Case
The Official Raspberry Pi Zero & Zero Wireless Case is now available!
R79.90  Inc VAT
Pi Zero micro USB to USB A Adapter White (Zero USB adapter)
Description:

This Pi Zero USB Adaptor converts the Zero's Micro USB B Port to a full sized USB A port so you can plug in your mouse, keyboard or any other required peripherals! It's an OTG (on-the-go) host cable, which means your Zero can act as a host (master) or client (slave) device! This one's in white!

Features:

  • Micro USB B (Male) to USB A (Female)
  • OTG On-The-Go Host Cable
  • CE and ROHS Compliant
  • For the Raspberry Pi Zero
This Pi Zero USB Adaptor converts the Zero's Micro USB B Port to a full sized USB A port
R19.90  Inc VAT
Pibow Zero W (Pibow zero W)
Description:

Protect your Pi Zero W in style with the Pibow Zero W case, in beautiful berry colours - red, purple, and blue!

Note that this is the case for the Raspberry Pi Zero W only. This case is not compatible with the Pi Zero v1.2/1.3. Does not include a Raspberry Pi Zero W!

Features

  • Compatible with Raspberry Pi Zero W
  • Super-slimline profile
  • Fully HAT/pHAT compatible
  • Protects your beloved Pi Zero W!
  • Clear top and base leave Raspberry Pi Zero W visible
  • GPIO cut-out
  • Leaves ports and GPIO accessible (encloses micro SD and blocks RUN/TV header)
  • Made from lightweight high-quality cast acrylic
  • Great for hacking and tinkering!
  • Made in Sheffield, UK

Crafted out of four unique layers including a transparent top and base that leave your beautiful Pi visible inside. Each layer is laser-cut from colourful high-quality cast acrylic and once stacked they securely contain a Raspberry Pi Zero W while leaving the primary ports and GPIO accessible.

This case is lightweight and ideal for mounting to any surface. No tools are required for assembly or disassembly (check out the exploded diagram on this page for tips on assembly, or our tutorial).

Protect your Pi Zero W in style with the Pibow Zero W case, in beautiful berry colours - red, purple, and blue!
R85.64  Inc VAT
R109.90
Camera Module for Raspberry Pi Zero Standard (zero cam standard)

How to use Picamera with Raspberry Pi OS Bullseye: https://www.youtube.com/watch?v=E7KPSc_Xr24&list=WL&index=2

Description:


This minimal Camera for the Pi Zero is perfect for small camera projects where space is at a premium.

The sensor is 5MP, and the whole shebang is mounted on a flexible circuit board. As such, a little care is needed when handling, just like the connector on the Pi Zero. Easy there Lennie.

Otherwise it's an economical and svelte solution for birdcams, bodycams, home security and simple computer vision projects.

Only for Raspberry Pi Zero with CSI camera port.

Specifications:

Approx dimensions of camera: 10mm x 11.4mm x 5.1mm

Resources:

Getting started with PiCamera

R319.90  Inc VAT
Pi Zero USB Stem (zero usb stem)
Description:

The Zero Stem uses the test points underneath your Pi Zero to attach a full-sized USB connector. Convert your Pi Zero or Pi Zero W into a convenient USB dongle.

Just plug it into a free USB port and you can connect to your Pi over USB ethernet and share your computer's internet connection without any additional cables or power supplies.

Zero Stem is soldered onto the bottom of your Pi Zero and secured with bolts, making it convenient to use on the go. Use it to create your own little plug-and-play virtual machine, VNC server, proxy server or combine several into a cluster.

Kit includes:

  • Zero Stem PCB
  • USB connector
  • Nylon bolts and nuts

Details:

  • Compatible with Pi Zero V1.3 (with camera connector) and Pi Zero W.
  • Not compatible with Pi Zero v1.2 (without camera connector)!
  • Supported in Raspbian Jessie Pixel and Lite
  • Setup needed (see below)
  • Requires soldering!

Assembly and Installation:

Visit https://zerostem.io/installation/ for complete assembly instructions.

Preparing Raspbian:

Thanks to Andrew Mulholland for writing up these instructions, which you can find in this GitHub Gist.

In short:

  • Flash your SD card as usual using Etcher or Win32DiskImager
  • Open up the "boot" partition and edit "config.txt", adding "dtoverlay=dwc2" to the bottom
  • Open up "cmdline.txt" and add "modules-load=dwc2,g_ether" after "rootwait"
  • Create a new file named "ssh" in the boot folder

Pop your newly set up SD card into your Pi Zero, plug it into a USB port and you should be able to SSH in to "raspberrypi.local", you will need Bonjour, iTunes or Quicktime installed in Windows or Avahi Daemon in Linux for this to work.

As Seen On Bilge Tank

Convert your Pi Zero or Pi Zero W into a convenient USB dongle.
R129.90  Inc VAT
GPIO Hammer Header Male (Hammer Header Male only)
Description:

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! your header is securely attached to your Pi Zero or pHAT.

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers might be just the job. They come in male and female flavours, and use crafty little retaining nubbins to grip tightly into the holes on the PCB.

The installation jig kit contains two acrylic base pieces, onto which your Pi Zero or pHAT sits, two steel bolts, an acrylic top piece onto which you hammer, and both a male and female header. Make sure you carefully read our guide for fitting hammer headers.

We strongly recommend using our installation jig! If you want to try without it then godspeed to you but it is a delicate and tricky process! The female headers are simpler to insert than the male headers as you can hammer straight onto the plastic of the header, but the male ones are particularly tricky without the jig.

Please note: we can't be held responsible for any damage that you may cause to your Pi Zero, pHAT, fingers, or headers while fitting them. If you follow our guide carefully then you should be fine. If this worries you, then get yourself a soldering iron instead!

R34.90  Inc VAT
Colour-coded GPIO Header for Pi Zero (Colour coded header 40 pin)

Description:

Colour-coded GPIO pins that make locating that ground or power connection you need super simple!

These 40-pin 2x20 male headers from our friends at The Pi Hut can be used on a Raspberry Pi Zero and are colour-coded for your prototyping convenience.

You'll never have to search for a ground pin again!

The colour coding is nice and simple:

  • Red = 5V
  • Yellow = 3V3
  • Black = GND
  • Blue = DNC (Reversed I2C)

For hard-mode try installing the header the wrong way round and throwing away your normal pin reference! ;-)

Specifications:

  • Gender: Male
  • No. of Contacts: 20
  • No. of Pins: 20
  • Termination: Straight Pins Solder Tail
  • Size: 2.54mm
  • Row Positions: Double Row



What's in the box:

1 x Colour-coded GPIO Header

R18.90  Inc VAT
USB-A Addon Board V1.1 Connector Expansion Board For Raspberry Pi Zero / Zero W (Zero USB A dongle board)
Please note: Raspberry pi zero not included

Overview:


This addon board connects to a Raspberry Pi Zero (RPi0) or Zero W (Wireless) via pogo pins to provide a full sized, USB Type-A connector.
You can use Raspberry pi zero or Raspberry pi zero W as a U disk via P4wnP1 P4wnP1 project, and you can use it as a BadUSB device too.

Specifications:

Size: 6g
Weight: 8.0 x 3.0 x 0.5cm  (with USB port)
             6.5 x 3.0 x 1.2mm (PCB size)

More info available at http://www.raspberrypiwiki.com/index.php/Raspberry_Pi_Zero_W_USB-A_Addon_Board

Package includes:

1x USB-A Addon Board
This addon board connects to a Raspberry Pi Zero (RPi0) or Zero W (Wireless) via pogo pins to provide a full sized, USB Type-A dongle
R209.90  Inc VAT
Clear Acrylic Case For Raspberry Pi Zero (Zero acrylic case 2 layer)
Description:
 
A tiny and lovely clear acrylic enclosure for the newest raspberry pi zero W. It designed to be beautiful, light, and easy-assembly. Perfect for any use (but especially for those who want to carry their Pi around in their pocket!). This enclosure is only compatible with the Raspberry Pi Zero W! The case is as minimal as it gets coming in just two pieces of acrylic that secure with four screws. Made of crystal-clear acrylic, this case keeps the Pi Zero W secure.
There are two USB holes and one cooling hole, you can use all of the connectors on the edges of the Pi: mini HDMI, micro SD slot, micro USB power, and micro USB port. There's also a cut out to allow a 2x20-pin header to be soldered onto the Pi Zero W.

Features:


1. Easy to assemble
2. 2 layers, 4 bolts, spacers and nuts included
3. Will fit Raspberry Zero & Zero W

Notes:
Only includes the case. RPi Zero is not included.
Don't forget to remove the protective film from the acrylic.

Package Includes:

1x Clear Acrylic Case heat sink
R52.90  Inc VAT
Camera Module for Raspberry Pi Zero without infra-red filter (zero cam NOIR)

How to use Picamera with Raspberry Pi OS Bullseye: https://www.youtube.com/watch?v=E7KPSc_Xr24&list=WL&index=2

Description:

This minimal Camera for the Pi Zero is perfect for small camera projects where space is at a premium.

The sensor is 5MP, and the whole shebang is mounted on a flexible circuit board. As such, a little care is needed when handling, just like the connector on the Pi Zero. Easy there Lennie.

Otherwise it's an economical and svelte solution for birdcams, bodycams, home security and simple computer vision projects.

Update: Without an IR filter, which is useful for night vision, especially when using IR lights to illuminate the subject

Only for Raspberry Pi Zero with CSI camera port.

Approx dimensions of camera: 10mm x 11.4mm x 5.1mm

Getting started with PiCamera

R329.90  Inc VAT
Wide Angle – Camera Module for Raspberry Pi Zero (zero cam wide angle)

How to use Picamera with Raspberry Pi OS Bullseye: https://www.youtube.com/watch?v=E7KPSc_Xr24&list=WL&index=2

Description:

This minimal camera for the Pi Zero (or Pi Zero W, WH, 2W) is perfect for small camera projects where space is at a premium.

The sensor is 5MP, and the whole shebang is mounted on a flexible circuit board. As such, a little care is needed when handling, just like the connector on the Pi Zero. Easy there, Lennie!

Otherwise it's an economical and svelte solution for bird box cameras, body-cams, home security, and simple computer vision projects.

Now with 160 degree wide angle lens

Features

  • 5MP sensor, 2592x1944 pixels (same as version 1 official Pi camera)
  • 1080p video at 30 FPS (or 60 FPS at 720p, 90 FPS at 480p)
  • f2.9 lens, 3.60 mm focal length
  • 53.50 degrees horizontal, 41.41 degrees vertical field of view
  • Approx. dimensions of circuit and camera: 60 x 11.4 x 5.1mm

Notes

  • Only for Raspberry Pi Zero or Zero W with CSI camera port
  • Raspberry Pi Zero not included
What's in the box:

1 x Camera module

Getting started with PiCamera
R329.90  Inc VAT
R359.90
Raspberry Pi Zero W Case Blue ABS with GPIO Reference (Blue Zero ABS case)
Introduction :

This case is suitable for the Raspberry Pi ZERO range. There is GPIO references on the cover making it a very useful case

Features:

1. GPIO reference on the the top of case - you needn't search for the references online.
2. Hole on the buttom of case -   you can mount the case on the wall
3. Translucent color design - make the case more beautiful and you can see the pi in the case
4. Use for Raspberry Pi ZERO range

Specifications :

1. Material : ABS
2. Weight : 17 g approx
3. Size ( L x W x H) : 72mm x 34mm x 17mm approx

Package Includes :

1 x Raspberry Pi Zero Case
R59.90  Inc VAT
Black ABS Shell Case for Raspberry Pi Zero (Shell black zero case)
Introduction:

The case is made of ABS , harder than acrylic so it will provide better protection for your raspberry pi zero , and it is not easy to scratch. What's more , there is camera cable hold , sd card hole and a hook hold on the case , convenient to use .

Install Tips:

1.The 2 short screws is used to fix the raspberry pi zero in the case from inside.
2.The 2 long screws is used to fix the raspberry pi zero from outside

Features:

Material : ABS
Color: Available in Black  and Frosted

Package includes:

1 x Raspberry Pi Zero ABS Case
R59.90  Inc VAT
Frosted ABS Shell Case for Raspberry Pi Zero (Shell frosted zero case)
Introduction:

The case is made of ABS , harder than acrylic so it will provide better protection for your raspberry pi zero , and it is not easy to scratch. What's more , there is camera cable hold , sd card hole and a hook hold on the case , convenient to use .

Install Tips:

1.The 2 short screws is used to fix the raspberry pi zero in the case from inside.
2.The 2 long screws is used to fix the raspberry pi zero from outside

Features:

Material : ABS
Color: Available in Black  and Frosted

Package includes:

1 x Raspberry Pi Zero ABS Case
R59.90  Inc VAT
Per Page      1 - 20 of 38