Special Offers

1 x Acrylic frame for Raspberry Pi Display 2

No more bulky DIN Rail cases for the Arduino Uno or Mega! The DINrPlate is a neat little slim line DIN Rail Mount for Arduino/Genuino Uno and Mega! It's formed of a single plate with mounting holes and strain relief for the USB and Barrel jack cables!

The DINrPlate Features

• Compatible with Ardunio/Genuino Uno and Mega
• Includes base, and screws to mount board
• Integrated strain relief for USB and barrel jack power cables, tie wrap included
• Vertical design uses less DIN rail space (32mm)
• Easy access to all ports and GPIO pins
• Does not include Arduino/Genuino, USB cable, DIN Rail or micro SD.

Specifications

• Industrial grey color blends in well with your other panel components for a professional look.
• High quality Nylon 6/6 material is well suited for industrial environments.
• Large 10mm DIN clip reliably grips rail and will not release without use of a screw driver.
• Easy access to Micro SD card for maintenance.
• Dimensions 7" x 4" x 0.5"

What's in the box?

1 x DINrPlate for uno/mega

Resources

Installation Instructions

1. Screw longer 12mm screws from backside until all the way in.

2. Attach Arduino board to base using included 12mm standoff's.

3. If using a shield, then attach to Arduino and secure with included 6mm screws. Note: Because of the clearance on arduino pin headers, not all screws holes can be used.

4. Insert either USB or DC cable for power.

5. Secure DC cable in place with included tie-wrap, and cut off any excess tie wrap.

6. Attach base to 35mm DIN rail.

Give your next animatronic or robotic project the gift of eyes with this Snake Eyes Bonnet Pack for Raspberry Pi. The Snake Eyes bonnet is an accessory for driving TFT LCD displays, and it also provides four analog inputs for sensors. It's perfect for making cosplay masks, props, spooky sculptures for halloween, animatronics, robots...anything where you want to add a pair of animated eyes!

We recently added some very fancy 1.54" TFT displays with high density 240x240 resolution and IPS full angle viewing. Basically, they've got the image quality of an OLED, but the pricing of a TFT - and 4x the pixels of either! Perfect for dazzlingly good looking eyes. What's not to love?

We really really recommend only pairing this with a Raspberry Pi 3 or better. These high-density displays have a lot of pixels to push around and the quad-core Pi 3 will help keep the frame rate high and flicker-free.

What's in the box?

1 x Adafruit Animated Eyes Bonnet for Raspberry Pi
1 x Premium Female/Female Jumper Wires - 40 x 12" (300mm)
2 x Adafruit 1.54" 240x240 Wide Angle TFT LCD Display with MicroSD

Note: Raspberry Pi is not included.

Resources

Some through hole soldering, assembly, and coding is required For all the details on how to use this Bonnet, check out the tutorial which has code, diagrams and some creative ideas for usage!

This board is designed to dock with a BBC micro:bit using the micro:bit's edge connector. The board is a true CO2 sensor that also measures temperature and relative humidity.

Features

• Low power -- power directly from your micro:bit
• CO2 0-5000ppm, temperature and relative humidity measurement
• Has a makecode library to simplify programming

Please note that this product, while it has many of the same features as the MonkMakes CO2 for micro:bit is based on a completely different sensor and is not a direct replacement for use in the Living Space project (amendments will need to be made to the teacher's notes).

What's in the box?

1 x CO2 Dock for micro:bit (Micro:bit not included)

Resources

https://monkmakes.com/downloads/datasheet_co2_dock.pdf
https://monkmakes.com/downloads/instructions_co2_dock.pdf

Please note: The Raspberry Pi board is not included in this kit. You will have to add the board of your choice to your order. You might also need a matching power supply and HDMI cable if you don't already have them.

• The Raspberry Pi Raphael Starter Kit for Beginners: The Raspberry Pi Raphael Starter Kit for Beginners: The kit offers a rich learning experience for beginners aged 10+. With 337+ components, 161 projects, and 70+ expert-led video lessons, this kit makes learning Raspberry Pi programming and IoT engaging and accessible. Compatible with Raspberry Pi 5/Pi 4B/Pi 3B/Zero 2 W /Pi 400/500, RoHS Compliant
• Expert-Guided Video Lessons: The Raspberry Pi Kit includes 70+ video tutorials by the renowned educator, Paul McWhorter. His engaging style simplifies complex concepts, ensuring an effective learning experience in Raspberry Pi programming.
• Wide Range of Hardware: The Raspberry Pi 5 Kit includes a diverse array of components like Camera, Speaker, sensors, actuators, LEDs, LCDs, and more, enabling you to experiment and create a variety of projects with the Raspberry Pi.
• Supports Multiple Languages: The Raspberry Pi 4 Kit offers versatility with support for 5 programming languages - Python, C, Java, Node.js and Scratch, providing a diverse programming learning experience.
• Dedicated Support: Benefit from our ongoing assistance, including a community forum and timely technical help for a seamless learning experience.

What's in the box?

337 items as per below pic

You will also need.........

• a Raspberry Pi board
• a Power supply
• a Keyboard and mouse
• a HDMI cable

Resources

For this SunFounder Ultimate Raspberry Pi Kit, each lesson shows a circuit diagram, an overview of the operating principles, and an explanation of the code used for the project. Please refer to the Online Tutorials for Raphael Kit.

This board is designed to interface to a BBC micro:bit through ring connectors. The board is a true CO2 sensor that also measures temperature and relative humidity.

Features

• Low power -- power directly from your micro:bit
• CO2 0-5000ppm, temperature and relative humidity measurement
• RGB LED indicates CO2 level

What's in the box?

1 x CO2 Mini Kit for micro:bit

• The Raspberry Pi Da Vinci Starter Kit for Beginners & Experts: The kit offers a rich learning experience for beginners aged 10+. With 300+ components, 150+ projects, and 70+ expert-led video lessons, this kit makes learning Raspberry Pi programming and IoT engaging and accessible. Compatible with Raspberry Pi 5/4B/3B+/3B/Zero 2 W /400 （Not included Raspberry Pi）
• Expert-Guided Video Lessons: The kit includes 70+ video tutorials by the renowned educator, Paul McWhorter. His engaging style simplifies complex concepts, ensuring an effective learning experience in Raspberry Pi programming
• Wide Range of Hardware: The kit includes a diverse array of components like sensors, actuators, LEDs, LCDs, and more, enabling you to experiment and create a variety of projects with the Raspberry Pi
• Supports Multiple Languages: The kit offers versatility with support for 5 programming languages - Python, C, Java, Node.js and Scratch, providing a diverse programming learning experience
• Dedicated Support for Beginners: Alongside online resources and video tutorials, SunFounder provides technical support and troubleshooting forums to help beginners solve programming challenges

What's in the box?

Resources

https://docs.sunfounder.com/davinci-kit

This DIN rail bracket is a reliable mounting accessory designed to secure electronic components, circuit boards, and terminal blocks onto standard DIN rails commonly used in industrial automation, electrical enclosures, and control panels. It ensures stable and organized installation, preventing movement or disconnection due to vibrations or mechanical stress. Made from high-quality insulating plastic, it provides excellent durability and protection against environmental factors, ensuring long-term performance in industrial settings.

With its pre-drilled holes and included screws, this bracket allows for quick and hassle-free installation, reducing assembly time and maintenance efforts. It is compatible with various industrial components such as relays, power supplies, PLC modules, and circuit protection devices, making it an essential accessory for control systems and wiring applications. Whether used in electrical cabinets, automation systems, or industrial machinery, this DIN rail bracket enhances organization and efficiency in any setup.

Features

• Material: PA66V0
• Wiring Method: Track Wiring 
• Colour Classification: DRG-01
• Compatible with M3x10mm screw
• Supports standard DIN rails dimensions (Width: 35mm Height:7.5mm)

What's in the box?

2 x DIN Rail Bracket
4 x M3 Screw (10mm)

Interstate 75 W is a RP2350-based driver board for HUB75-style LED matrices - they're the chainable LED panels (32 x 32 or 32 x 64) that you sometimes see making up video walls or big advertising displays. It's designed to plug neatly into the back of a LED panel, and it provides a quick and easy way to whip up some scrolling signage or an eye-catching LED display for sensor outputs. I75 W has wireless connectivity so you can also use it to display information from the internet! ????

It's powered via USB-C, which should also be able to power a few connected panels happily, assuming you're not planning anything too eye-bleedingly bright. It has three handy user buttons (A, B and BOOT) and an onboard RGB LED.

We've also popped a Qw/ST connector on there, to make it super easy to plug in Qwiic or STEMMA QT breakouts.

Here are some things you could do!

???? Tap into an API and display bus times, plane tracking or traffic info.

???? Generate a big bold graph showing air quality or other sensor readings.

???? Create some ad hoc, easily adjustable signage for your classroom, maker stall or kebab shop.

???? Scroll greetz to your crew, just like in the old days:

"`-._,-'"`-._,-' HACKED AND PACKED BY PIMORONI "`-._,-'"`-._,-'

Features

• Powered by RP2350A (Dual Arm Cortex M33 running at up to 150MHz with 520KB of SRAM)
• 4MB of QSPI flash supporting XiP
• Raspberry Pi RM2 module (CYW43439), supporting IEEE 802.11 b/g/n wireless LAN, and Bluetooth
• Compatible with our 32x32, 32x64, 64x64 and 128x64 LED matrices.
• Sturdy screw terminals for powering the LED panels
• USB-C connector for programming and power
• Two user buttons (labelled A and B)
• Reset and boot buttons (the boot button can also be used as a user button)
• RGB LED
• Qw/ST (Qwiic/STEMMA QT) connector
• Comes fully-assembled (no soldering required)
• Programmable with C/C++ or MicroPython

What's in the box?

1 x Interstate 75 Matrix driver board

Resources

Pinout and Schematic

• Download a printable PDF version
• Schematic (RP2350 version)
• Schematic (Pico W Aboard version)

Getting Started

You can find the most recent version of the MicroPython firmware and examples at the link below:

• Interstate 75 MicroPython firmware and examples

Connecting Breakouts

I75 W has a Qw/ST (AKA Qwiic/STEMMA QT) connector, so you can connect up Qw/ST breakouts easily using a JST-SH to JST-SH cable.

We've also broken out a bunch of useful pins along the bottom edge of the board (including I2C, analog, UART and debug pins) so you can solder things like breakouts or analog potentiometers directly to them.

Notes

• Measurements: approx 64.3 x 36 x 17mm (L x W x H, including connectors)

About RP2350

The RP2350 chip is the Double Quarter Pounder & Fries to the RP2040's Double Cheeseburger and can have one or more RISC-V burgers instead of either of the M33 ARMs, to stretch the metaphor.

In addition to the modern M33 ARM cores, there are sides of: more PIO capability, a variety of low power states for sipping electrons, a whole security system and some sprinklings of specialist digital video circuits to offload DVI/HDMI output.

You can expect a tasty boost in performance - our "real world" MicroPython tests are running up to 2x faster compared to RP2040, and floating point number crunching in C/C++ is up to 20x faster. The extra on-chip RAM will make a big difference when performing memory intensive operations (such as working with higher resolution displays) and even more can be added thanks to external PSRAM support.

RP2350 comes in two flavours - A (standard) and B (all the pins). The B chip has a stonking 48 usable GPIO pins, including 8 ADCs and 24 PWMs, and features on some of our new products. 

Swap out your Picade's arcade buttons for the crystal clear ones in this kit, pop one of the Picade Plasma PCBs over the button's spade terminals, hold the PCB in place with the spade connectors, and chain all of the Plasma PCBs together with the included cables. Use the host cable to connect the Plasma chain to your Picade X HAT, install our Picade Plasma software, and BAM, your Picade is 110% more colourful!

Each Picade Plasma PCB has four tiny, addressable, RGB LEDs (APA102) and a data in and data out JST connector. They're designed to fit neatly inside the recess on the back of our low-profile arcade buttons and shine their light through the clear plastic. The white PCB bounces an spilled light from the LEDs to give them extra GLOW.

Picade Plasma Features

• APA102 addressable RGB LEDs
• Chain-able
• JST connectors for data in and data out
• Designed for our low-profile arcade buttons
• Connects to the Hack Header on our Picade X HAT
• Python daemon

What's in the box?

10 x clear 30mm push-fit arcade buttons
10 x Picade Plasma PCBs
5 x 10cm button cables
4 x 30cm buttons cables
1 x 30cm host cable

Resources

As well as using Plasma buttons with Picade and Picade X HAT, you can connect them straight to GPIO on your Pi, or other microcontroller. This makes them ideal for DIY arcade builds and even building things like your own DIY midi controller.

You can read our tutorial on fitting Picade Plasma buttons to find out how to fit the buttons and control them with the Picade Plasma software.

Notes

• PCB dimensions: 24mm diameter, 5.75mm thick (including JST connector)
• LED brightness is limited to a sensible level in software. Adjust this at your peril!
• Picade Console is for illustration only, and not included!

The WIZnet W6100-EVB-Pico2 is a microcontroller board based on the Raspberry Pi RP2350 and fully hardwired TCP/IP controller W6100, with Ethernet via the W6100 and USB-C!

The board can also support PoE via the optional WIZPoE-P1 PoE add-on module.

The W6100-EVB-Pico2 pinout is directly connected to the GPIO of RP2350 as shown in the pinout image. It has the same pinout as the Raspberry Pi Pico 2 board. However, GPIO16, GPIO17, GPIO18, GPIO19, GPIO20, GPIO21 are connected to W6100 inside the board. These pins enable SPI communication with W6100 to use the Ethernet function. If you use the Ethernet function, these pins cannot be used for any other purpose.

MicroPython is not yet supported as the wiznet5k library does not yet support the W6100 chip. WIZnet are working on this. CircuitPython may support the chip in IPV4 mode only.

The RP2350 GPIO used inside W6100-EVB-Pico is as follows.

Apart from GPIO and ground pins, there are 7 other pins on the main 40-pin interface:

You may be wondering what the difference is between the different models of WIZnet boards we offer. This mostly comes down to the TCP/IP controller chip used.

Take a look at WIZnet's comparison table to identify the right board for your needs.

Features

• RP2350 Microcontroller with Integrated 16Mbit Flash
  • Symmetric dual Arm Cortex-M33 cores at up to 150MHz
  • 520kByte multi-bank high-performance SRAM
  • External Quad-SPI Flash with eXecute In Place (XIP) capabilities
  • Enhanced performance full-crossbar bus fabric
  • Up to 48 multi-function General Purpose IO (8 can be used for ADC on RP2350-B)
    • 1.8-5.0V IO Voltage
• Security Features
  • One-Time Programmable (OTP) Memory: Used for boot configuration and secure key storage.
  • Secure Boot: Ensures that only authenticated software can run on the device, utilizing OTP for key verification.
  • Arm TrustZone Technology: Provides hardware isolation between secure and non-secure software, enhancing security for critical applications.
• Analog and Digital Peripherals
  • 12-bit 500ksps Analogue to Digital Converter (ADC)
  • 2 × UART, 2 × I2C, 2 × SPI, 16 × PWM channels
  • 1 × Timer with 4 alarms, 1 × Real Time Counter
  • 3 × Programmable IO (PIO) blocks, 12 state machines total
  • Flexible, user-programmable high-speed IO
  • Can emulate interfaces such as SD Card and VGA
• W6100 Ethernet Controller
  • Supports Hardwired Internet Protocols: TCP, UDP, IPv6, IPv4, ICMPv6, ICMPv4, IGMP, MLDv1, ARP, PPPoE
  • Supports 8 independent SOCKETs simultaneously with 32KB memory
  • Internal 16 Kbytes Memory for TX/ RX Buffers
  • SPI Interface
• Connectivity
  • USB-C port for power and data (and for reprogramming the Flash)
  • 40 pin 21x51 'DIP' style 1mm thick PCB with 0.1" through-hole pins also with edge castellations
  • 3-pin ARM Serial Wire Debug (SWD) port
• Networking
  • 10 / 100 Ethernet PHY embedded
  • Supports Auto-Negotiation
    • Full / Half Duplex
    • 10 / 100 Based
  • Built-in RJ45(RB1-125BAG1A)
• Power Supply
  • Built-in Switch-mode DC-DC converter (replacing LDO for enhanced power efficiency)

What's in the box?

1 x WIZnet W6100-EVB-Pico2

Resources

• Product documentation
• RP2350 datasheet
• W6100 Datasheet
• Schematic
• Part list & Gerber File
• CE Certificate
• CE Test Report
• FCC Certificate
• FCC Test Report

Pimout

The Creality Ender-3 V3 KE builds on the well-loved Ender-3 design, now upgraded with impressive high-speed printing capabilities of up to 500mm/s. This performance boost comes from features like a precision linear rail on the X-axis, a powerful 60W ceramic hotend, dual-sided cooling fans, and automatic calibration. The Ender-3 KE also includes modern connectivity options, including Wi-Fi, LAN, and USB drive support through the Creality Cloud App. It’s a feature-rich 3D printer offered at an excellent price point—just what you’d expect from a trusted name like Creality.

What's in the box?

1 x Creality Ender 3-V3-KE 3D Printer

This product's colour is transparent. Please ignore the Grey label on the product pic

This resin works with LCD based UV resin printers working at 405nm. It is designed with a fast curing time, high stability and low shrinkage. The result of this is accurate smooth parts that can be used in a wide variety of applications. This resin is specifically designed for the Creality range of 3D printers, but can also be used on other LCD resin printers.

Being Transparent and 1kg amount make it perfect for a variety of applications.

What's in the box?

1 x Standard Resin Plus 1kg

Poly-lactic acid, commonly known as PLA, stands out as the ideal material for beginners venturing into the realm of 3D printing. Its user-friendly nature, exceptional adhesion properties, and suitability for durable prints make it an excellent choice. Thanks to its rapid solidification, PLA delivers superior print quality for intricate, smaller objects without compromising on speed.

Specifications

• Material: 100% Poly-lactic acid, PLA
• Printing features:
  • Bed temperature 45-55 ºC
  • Printing temperature range 190-220 ºC
  • Density 1.25 g/cm³
• Compatibility: Any printer that uses 1.75mm filament
• Dimensions:
  • Filament diameter: 1.75mm
  • Coil size (D x W): 200 x 66 mm
  • Coil shaft diameter: 56mm

What's in the box?

1 x Creality CR-PLA Filament, black 1Kg
1 x Creality CR-PLA Filament, white 1Kg

Features

• Unidirectional microphone with flexible noise cancelling
• Ergonomic and comfortable ear pads 40 mm, 50 mW (RMS) stereo speakers 32 ohm nominal sensitivity
• Frequency range of 20Hz 20KHz, high speed USB connection
• Adjustable, very lightweight headband
• Volume control on the headset

Specifications

• Brand:    A4tech
• Colour:    Black
• Form factor:    On Ear
• Noise control:    Active Noise Cancellation
• Headphone jack:    USB plug with 200cm cable
• Model name:    Hu-30
• Connectivity technology:    kablolu
• Included components:    Ear Cushions
• Age range (description):    Adult
• Material:   Faux Leather

Headset

• Speaker unit: 40mm
• Frequency response: 20Hz - 20KHz
• Sensitivity: 102dB
• Impedance: 32 ohm

Microphone

• Frequency response: 100Hz - 10KHz
• Sensitivity: 42dB

What's in the box?

1 x stereo Headset with microphone

• Raspberry Pi Compute Module 4 IO Board product brief
• Raspberry Pi Compute Module 4 IO Board datasheet
• Raspberry Pi Compute Module 4 IO Board KiCAD file

Arduino is an open-source electronics platform based on easy-to-use hardware and software. Arduino boards are able to read inputs - light on a sensor, a finger on a button, or a Twitter message - and turn it into an output - activating a motor, turning on an LED, publishing something online.

Specifications

• Arduino compatible board
• Microcontroller ATmega328
• Operating Voltage 5V
• Input Voltage (recommended) 7-12V
• Input Voltage (limits) 6-20V
• Digital I/O Pins 14 (of which 6 provide PWM output)
• Analog Input Pins 6
• DC Current per I/O Pin 40 mA
• DC Current for 3.3V Pin 50 mA
• Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader
• SRAM 2 KB (ATmega328)
• EEPROM 1 KB (ATmega328)
• Clock Speed 16 MHz
• Length 68.6 mm
• Width 53.4 mm

What's in the box?

1 x UNO R3
1 x USB cable

Resources

Find more info on Arduino at https://www.arduino.cc/en/Guide