Raspberry Pi
58mm long by 44mm wide - adds a splash of colour to laptops, camera cases, fridge doors or anywhere else you can think to put it.
Not only are you helping the Foundations educational aims by buying these, you're also brightening up the world for everyone else :-)
What's in the box?
6 x Raspberry Pi Stickers
The dual-band wireless LAN comes with modular compliance certification, allowing the board to be designed into end products with significantly reduced wireless LAN compliance testing, improving both cost and time to market. The Raspberry Pi 3 Model B maintains the same mechanical footprint as both the Raspberry Pi 2 Model B and the Raspberry Pi 3 Model B.
We only stock UK made Raspberry Pi's manufactured in Sony's Pencoed factory in South Wales.
Please Note. It is recommended to use a 2.5A Power Supply with the Raspberry Pi 3 B plus.
Specifications
- Processor
- Broadcom BCM2387B0 chipset.
- 1.4GHz Quad-Core ARM Cortex-A53 (64Bit)
- Connectivity
- 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
- Gigabit Ethernet over USB 2.0 (maximum throughput 300Mbps)
- 4 × USB 2.0 ports
- GPU
- Dual Core VideoCore IV® Multimedia Co-Processor. Provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode.
- Capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs with texture filtering and DMA infrastructure
- Memory
- 1GB LPDDR2
- Operating System
- Boots from Micro SD card, running a version of the Linux operating system or Windows 10 IoT
- Dimensions
- 85 x 56 x 17mm
- Power
- 5V/2.5A DC via micro USB connector
- 5V DC via GPIO header
- Power over Ethernet (PoE) enabled (requires separate PoE HAT)
Connectors
- Ethernet
- 10/100 BaseT Ethernet socket
- Video Output
- HDMI (rev 1.3 & 1.4)
- Composite RCA (PAL and NTSC)
- Audio Output
- Audio Output 3.5mm jack
- HDMI
- USB 4 x USB 2.0 Connector
- GPIO Connector
- 40-pin 2.54 mm (100 mil) expansion header: 2x20 strip
- Providing 27 GPIO pins as well as 3.3 V, 5 V and GND supply lines
- Camera Connector
- 15-pin MIPI Camera Serial Interface (CSI-2)
- Display Connector
- Display Serial Interface (DSI) 15 way flat flex cable connector with two data lanes and a clock lane
- Memory Card Slot
- Push/pull Micro SDIO
The Raspberry Pi 3 Model B will remain in production
until at least January 2023.
WARNINGS
- This product should only be connected to an external power supply rated at 5V/2.5 A DC. Any external power supply used with the Raspberry Pi 3 Model B shall comply with relevant regulations and standards applicable in the country of intended use.
- This product should be operated in a well-ventilated environment and, if used inside a case, the case should not be covered.
- Whilst in use, this product should be placed on a stable, flat, non-conductive surface and should not be contacted by conductive items.
- The connection of incompatible devices to the GPIO connection may affect compliance, result in damage to the unit, and invalidate the warranty.
- All peripherals used with this product should comply with relevant standards for the country of use and be marked accordingly to ensure that safety and performance requirements are met. These articles include but are not limited to keyboards, monitors, and mice when used in conjunction with the Raspberry Pi.
- The cables and connectors of all peripherals used with this product must have adequate insulation so that relevant safety requirements are met.
To avoid malfunction of or damage to this product, please observe the following:
- Do not expose to water or moisture, or place on a conductive surface whilst in operation.
- Do not expose to heat from any source; the Raspberry Pi 3 Model B is designed for reliable operation at normal ambient temperatures.
- Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board and connectors.
- Whilst it is powered, avoid handling the printed circuit board, or only handle it by the edges to minimize the risk of electrostatic discharge damage.
What's in the box?
1 x Raspberry Pi board
Resources
Getting Started with Raspberry Pi
The Raspberry Pi Foundation Official HDMI cables are now available from PiShop! Designed to offer optimal performance and functionality from the Raspberry Pi Zero, they're gracefully branded with the Raspberry Pi logo, made with ultra high quality materials and built to a world class specification. Triple layer shielding and nickel plated contacts ensure maximum signal transfer.
The Official Raspberry Pi HDMI Cables Feature
- Standard HDMI Male to mini HDMI Male
- 30/6.0 HDMI cable full 19 1pins, 30AWG, 6.0MM
- Nickel Plated Contacts for Optimal Contact Performance, Maximum Signal Transfer and Corrosion Resistance
What's in the box?
1 x HDMI to mini HDMI Cable 1m
The Official Raspberry Pi 3 Model A plus Case is here! Specially made and beautifully crafted, this nifty and tactile snap-together case is designed to protect your Raspberry Pi 3A ! The case is composed of two separate pieces: a base, and a removable top that enables the addition of HATs or other GPIO periphery! There's even LED lights pipes to top it all off!
Features of the Official Raspberry Pi Case
- Fabulous Raspberry Red and White Colour Combination
- 2 Part "Snap-Fit" Enclosure
- Cut-outs for all connection points
- MicroSD card cut-out
- Plastic LED light pipes
- Stick on rubber feet for case stability
- Super slim design measuring: 75mm x 65mm x 20mm
What's in the box?
1 x Raspberry Pi 3A/3A+ case
A lively red drawstring bag, perfect for school, going to the gym, carrying your mobile hackspace, or just doing some shopping!
Specifications
- 470 x 380mm
- Large capacity
- Single colour screen-printed logo
- Reinforced corners with metal eyelets
What's in the box?
1 x drawstring bag
Please note: The Raspberry Pi 4 model B board is not included with the case
Need to cool your RPi4 down? You might like the official case fan and heatsink add on.
The official Raspberry Pi 4 Model B case in a stunning red & white design (also available in black & grey)
- Optional clip-on lid provides protection but can be removed if using a HAT
- All primary ports (including microSD) accessible
- Snug and secure fit protects your Pi while looking great!
- Anti-slip feet keep your Raspberry Pi stable
- Power and activity lights still visible through the end of the case
- High-quality, two-part ABS construction
- Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card.
What's in the box?
1 x Raspberry Pi Official Pi4 Case
Official Raspberry Pi Micro HDMI to HDMI cable, fully licensed by Raspberry Pi
Perfect for running a dual screen setup. Use this cable to connect your VGA display to Raspberry Pi 4 , Raspberry Pi400 or Raspberry Pi 5.
- 19-pin HDMI Type D(M) to 19-pin HDMI Type A(M)
- 1m white cable
- Nickel-plated plugs
- 4Kp60 compliant
- RoHS compliant
- 3Mohm 300VDC insulation, withstands 300VDC for 0.1s
What's in the box?
1 x 1m Micro-HDMI to Standard HDMI cable
Official Raspberry Pi Micro HDMI to HDMI cable, fully licensed by Raspberry Pi
Perfect for running a dual screen setup. Use this cable to connect your VGA display to Raspberry Pi 4 , Raspberry Pi400 or Raspberry Pi 5.
Specifications
- 19-pin HDMI Type D(M) to 19-pin HDMI Type A(M)
- 2m white cable
- Nickel-plated plugs
- 4Kp60 compliant
- RoHS compliant
- 3Mohm 300VDC insulation, withstands 300VDC for 0.1s
1 x 2m micro white hdmi cable
This small adapter allows you to convert an existing micro USB power supply (like the official Raspberry Pi universal power supply for Raspberry Pi 1, 2 and 3) into a USB-C power supply.
Note that when a micro USB power supply is used, the maximum power that can be delivered to the Raspberry Pi 4 will be 12.5W. This means that less power will be available to devices connected to the USB 2.0 and USB 3.0 ports on the Raspberry Pi 4 than when using the new Raspberry Pi 15.3W USB-C power supply.
Please note: The Raspberry Pi 4 model B board is not included with the case
Need to cool your RPi4 down? You might like the official case fan and heatsink add on.
The official Raspberry Pi 4 Model B case in a stunning black & grey design (also available in red & white)
Features
- Optional clip-on lid provides protection but can be removed if using a HAT
- All primary ports (including microSD) accessible
- Snug and secure fit protects your Pi while looking great!
- Anti-slip feet keep your Raspberry Pi stable
- Power and activity lights still visible through the end of the case
What's in the box?
1 x Raspberry Pi4 model B case
Model | PT3611614M10MP |
Image format | 1" |
Focal length | 16mm |
Aperture | F1. 4-16 |
Mount | C |
Field angle | 1" 44.6° x 33.6° 2/3" 30.0° x 23.2° 1/1.8" 24.7° x 18.6° 1/2" 21.8° x 16.4° |
Back focal length | 17.53mm |
Optical length | 67.53mm |
M.O.D. | 0.20m |
Dimensions | 39.00 x 50.00mm |
Weight | 133.7g |
Specifications
Model | PT361060M3MP12 |
Focal length | 6mm |
Resolution | 3 MegaPixel |
Aperture | F1.2 |
Mount | CS |
Field angle DxHxV(°) | 63° |
M.O.D. | 0.2m |
Back focal length | 7.53mm |
Dimensions | 30 x 34mm |
Weight | 53g |
Operation | Manual |
What's in the box?
1 x 6mm camera lens
Official Raspberry Pi Micro HDMI to HDMI cable, fully licensed by Raspberry Pi
Perfect for running a dual screen setup. Use this cable to connect your VGA display to Raspberry Pi 4 , Raspberry Pi400 or Raspberry Pi 5.
- 19-pin HDMI Type D(M) to 19-pin HDMI Type A(M)
- 1m black cable
- Nickel-plated plugs
- 4Kp60 compliant
- RoHS compliant
- 3Mohm 300VDC insulation, withstands 300VDC for 0.1s
What's in the box?
1 x Official micro HDMI cable
Official Raspberry Pi HDMI Connector female to HDMI Micro Connector that has been engineered to maximise the performance and functionality of your Raspberry Pi. The Micro HDMI connector supports the new Raspberry Pi 4 Model B and allows connection to a standard HDMI cable. It's slim enough that you can use two side-by-side with your Raspberry Pi 4 to connect dual displays.
Features:
- Length: 23.5cm
What's in the box?
1 x male micro HDMI to female HDMI cable
Red T-shirt White Logo Adult Size. Sizing is to a standard UK high-street size, and the shirts fit true to size. We recommend purchasing your usual size. If you fall between two sizes, we advise purchasing the larger size. (Size guide available in product images)
Specifications:
Certified organic cotton 155g/m2
GM free
Not tested on animals
Does not contain animal-derived products
Printed in the UK with low-waste printing tech
Maintaining your tee: wash cool and hang dry to ensure print quality and longevity.
Red T-shirt White Logo Adult Size. Sizing is to a standard UK high-street size, and the shirts fit true to size. We recommend purchasing your usual size. If you fall between two sizes, we advise purchasing the larger size.
Specifications:
Certified organic cotton 155g/m2
GM free
Not tested on animals
Does not contain animal-derived products
Printed in the UK with low-waste printing tech
Maintaining your tee: wash cool and hang dry to ensure print quality and longevity.
This enamel badge, just 30mm from bottom to top, is an excellent addition to any outfit. With a beautiful gloss finish over the stylish Raspberry Pi logo you can show your support for the Foundation while also looking great!
Securely fastened with a butterfly and pinch pin fastener this badge can be easily attached to any item of clothing or bag, adding a splash of colour to any ensemble.
What's in the box?
1 x Pin badge
1 x butterfly and pinch pin fastener
This is a practical, yet elegant Raspberry Pi Ceramic mug from the Raspberry Pi Foundation. Let your Raspberry Pi spirit shines :) Be the envy of everyone in your office with the new Raspberry Pi mug!
Features:- Red color with White Raspberry Pi Logo
- Dishwasher safe
- 80mm diameter x 90mm tall
- 330ml capacity
- Bright and colorful!
The team at Raspberry Pi Foundation has extensively tested these mugs and can confirm that they are tea-, coffee-, and hot chocolate-compatible. They can also be used for cold drinks if that's your preference.
Note: While tested to over 1,000 domestic dishwasher cycles, it is recommended that you hand-wash this mug to keep it in tip-top condition.
Packing List:- 1 x Raspberry Pi Red Ceramic Mug
Please note: The case is not included
The Raspberry Pi 4 Case Fan works with Raspberry Pi 4 and the Raspberry Pi 4 Case. Designed for overclockers and other power users, it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load.
The temperature-controlled fan delivers up to 1.4 CFM of airflow over the processor, memory, and power management IC. The bundled 18mm × 18mm × 10mm heatsink with self-adhesive pad improves heat transfer from the processor.
Specifications
- Input voltage: 5V DC supplied via 40-pin GPIO header on Raspberry Pi 4
- Fan speed control: Pulse width modulation control via user-selectable GPIO pin
- Maximum airflow: 1.4CFM
- Case Material: Clear PC
- Fan size: 25mm x 25mm x 7mm
- Compliance: For a full list of local and regional product approvals please visit: www.raspberrypi.org/documentation/hardware/raspberrypi/conformity.md
- Fits perfectly into the lid of the official Raspberry Pi 4 Case
- Temperature-controlled fan delivers up to 1.4CFM of air flow over the processor, memory and power-management IC
- 18mm × 18mm × 10mm heatsink with self-adhesive pad improves heat transfer from the processor
What's in the box?
1 x 25mm x 25mm x 7mm fan
1 x 18mm × 18mm × 10mm heatsink
1 x housing for fan
Fitting Instructions
1 Insert Raspberry Pi 4 unit into the lower half (base) of the case, taking care to first remove any SD card, and to align the connectors with the apertures in the base.
2 Insert the case fan into the upper half (lid) of the case, with the fan pointing away from the lid. The two tabs on the fan housing should fit neatly into the inside of the tabs on the lids, and the slightly curved edge of the housing should be flush with the underside of the lid.
3 If you are also fitting the heatsink, remove the backing paper from the selfadhesive pad on the base of the heatsink, position it centrally over the processor and gently press it in position.
4 Connect the wires from the fan to the Raspberry Pi 4 40-pin GPIO header as follows:
Lead Colour GPIO Pin
5v RED 4
Ground BLACK 6
GPIO 14 BLUE 8
5 Assemble the case.
Using your fan
Once you have connected your fan, by default it will be on whenever your Raspberry Pi is running. You can configure it to turn on only when your Raspberry Pi reaches a temperature that you choose.
Using a recent version of Raspberry Pi OS, first update to retrieve any recent changes to the operating system:
- Open the Terminal, either from the Start menu (click the Raspberry Pi icon in the top left corner) or by pressing Control Alt T.
- Type sudo apt update and then, when the update has finished, type sudo apt full-upgrade.
Then open the Raspberry Pi Configuration tool:
- Click on the Raspberry Pi icon in the top left corner and select Preferences then Raspberry Pi Configuration.
- Select the Performance tab.
- Next to Fan, click Enabled.
- If you have connected your fan as shown above, the default of 14 for Fan GPIO does not need to be changed.
- Select the Fan Temperature at which you want your fan to turn on. The default is 80°C, which will stop the Raspberry Pi throttling on difficult tasks without having the fan on all the time.
Specifications:
- HDMI plug to HDMI plug leads
- Compatible with Raspberry Pi 3 Model B, Pi 3 Model B and Pi 3 Model A and all previous Raspberry Pi models
- Triple layer shielding for better performance from WiFi and Bluetooth connectivity
- HDMI 2.0 with Ethernet and audio return channel
- Nickel plated OFC connectors
- Officially licensed by the Raspberry Pi foundation
What's in the box?
1 x HDMI cable