Generic3
- Ribbon of 40 x 300mm
- Male to Female
Features
- Tested for Compatibility with the Raspberry Pi
- Breadboard compatible
- Colour: Multi-coloured
What's in the box?
40 x 200mm Male to Female Jumper cables
Features
- The new "Powered by Raspberry Pi" logo T-shirt from Cytron Technologies!
- 100% cotton
- RED colour with WHITE colour design
Available Sizes
- Extra Small (XS): 36" or 91.44cm for the Chest, 26" or 66.04cm for Height
- Small (S): 38" or 96.52cm for the Chest, 27" or 68.58cm for Height
- Medium (M): 40" or 101.6cm for the Chest, 28" or 71.12cm for Height
- Large (L): 42" or 106.68cm for the Chest, 29" or 73.66cm for Height
- Extra Large (XL): 44" or 111.76cm for the Chest, 30" or 76.2cm for Height
- Double Extra Large (XXL): 46" or 116.84 cm for the Chest, 31" or 78.74 cm for Height
- Triple Extra Large (XXXL): 48" or 121.92 cm for the Chest, 32" or 81.28 cm for Height
What's in the box?
1 x T-shirt "Powered By Raspberry Pi"
Features
- The new "Powered by Raspberry Pi" logo T-shirt from Cytron Technologies!
- 100% cotton
- RED colour with WHITE colour design
Available Sizes
- Extra Small (XS): 36" or 91.44cm for the Chest, 26" or 66.04cm for Height
- Small (S): 38" or 96.52cm for the Chest, 27" or 68.58cm for Height
- Medium (M): 40" or 101.6cm for the Chest, 28" or 71.12cm for Height
- Large (L): 42" or 106.68cm for the Chest, 29" or 73.66cm for Height
- Extra Large (XL): 44" or 111.76cm for the Chest, 30" or 76.2cm for Height
- Double Extra Large (XXL): 46" or 116.84 cm for the Chest, 31" or 78.74 cm for Height
- Triple Extra Large (XXXL): 48" or 121.92 cm for the Chest, 32" or 81.28 cm for Height
What's in the box?
1 x T-shirt "Powered By Raspberry Pi"
Features
- The new "Powered by Raspberry Pi" logo T-shirt from Cytron Technologies!
- 100% cotton
- RED colour with WHITE colour design
Available Sizes
- Extra Small (XS): 36" or 91.44cm for the Chest, 26" or 66.04cm for Height
- Small (S): 38" or 96.52cm for the Chest, 27" or 68.58cm for Height
- Medium (M): 40" or 101.6cm for the Chest, 28" or 71.12cm for Height
- Large (L): 42" or 106.68cm for the Chest, 29" or 73.66cm for Height
- Extra Large (XL): 44" or 111.76cm for the Chest, 30" or 76.2cm for Height
- Double Extra Large (XXL): 46" or 116.84 cm for the Chest, 31" or 78.74 cm for Height
- Triple Extra Large (XXXL): 48" or 121.92 cm for the Chest, 32" or 81.28 cm for Height
What's in the box?
1 x T-shirt "Powered By Raspberry Pi"
Features
- The new "Powered by Raspberry Pi" logo T-shirt from Cytron Technologies!
- 100% cotton
- RED colour with WHITE colour design
Available Sizes
- Extra Small (XS): 36" or 91.44cm for the Chest, 26" or 66.04cm for Height
- Small (S): 38" or 96.52cm for the Chest, 27" or 68.58cm for Height
- Medium (M): 40" or 101.6cm for the Chest, 28" or 71.12cm for Height
- Large (L): 42" or 106.68cm for the Chest, 29" or 73.66cm for Height
- Extra Large (XL): 44" or 111.76cm for the Chest, 30" or 76.2cm for Height
- Double Extra Large (XXL): 46" or 116.84 cm for the Chest, 31" or 78.74 cm for Height
- Triple Extra Large (XXXL): 48" or 121.92 cm for the Chest, 32" or 81.28 cm for Height
What's in the box?
1 x T-shirt "Powered By Raspberry Pi"
Single-cell lithium base battery charger & protection module. The charging will be via a micro B connector. Lithium base battery includes Li-po and Li-ion battery as the charging and discharging characteristic is similar.
The USB micro B connector power input offers direct charging using widely available nowadays with power bank and also Android phone charger. With a maximum charging current of 1A, your battery can be charged faster and of course, do make sure the 5V input has sufficient power to provide more than 1A.
It comes with a TP4056 charging IC.
Using the module
- Connect micro USB cable for power, or 5V DC to pads marked IN+ and IN- on left-hand side of the module
- Connect cell to charge to B+/B- pads on right-hand side of module
- A load (something for the battery to power) can be connected to the OUT+/OUT- pads on the right-hand side
- Important! Disconnect load when charging
- The red LED indicates chaging in progress, green LED indicates charging has finished.
- Never charge your battery at a rate greater than 1C.
- Single Cell Lithium-based battery charger.
- USB Micro B connector for power input
- 5V input pads for DIY/custom input.
- Input Voltage: 5VDC
- Charging voltage limit: 4.2VDC
- Minimum discharge voltage: 2.5VDC
- Maximum discharge current: 3A
What's in the box?
1 x 1A LIPO Charger Module with Protection
DIY: Lithium 18650 Cells Charger by Using TP4056 Modules, in Instructables with video, by Well Done Tips
Note: This M.2 case is compatible with both NVMe and SATA SSD.
Some people must be tired of using small SD cards as memory space with low performance and specifications. It's time to change! Let's upgrade to SSD storage instead of using the normal SD card. The problem is most computer, smartphone, and Raspberry Pi does not have the socket for SSD storage. To overcome this problem, you just need a portable drive!
Plus, this case can be used with 4 variations of M.2 size (2230, 2242, 2260, 2280). It also comes with a USB C to USB 3.0 cable, so that you can directly connect to Raspberry Pi or any computer.
With this external M.2 NVMe storage, you can just boot the preferred Operating System for the Raspberry Pi 4 Model B direct from the USB! Interesting right? You just have to slot in your M.2 NVMe with preloaded Raspberry Pi OS and plug it into your RPi board. No driver is needed. Plug and play, straight out of the box. :)
- Using NVMe high-speed technology
- USB3.1 Gen 2 interface, transmission speed up to 6Gbps / 10Gbps
- Aluminum alloy shell, durable, easy to carry, and fast heat dissipation
- Easy installation, no need screw to install the case
- Support Raspbian, Windows, Macintosh OS, Linux, and Android systems
- Support Raspberry Pi board, PC, Macbook, smart TV, Android type-C mobile phone, and other digital devices
Specifications
- Enclosure Type: Dual protocol (can support both NGFF/NVMe)
- Material: Aluminum alloy
- Color: Silver
- Master Chip: Xingshuo 225
- Hard Disk Protocol:
- M.2 NGFF
- M.2 NVMe
- M.2 NGFF/NVMe
- Speed: 5Gbps @ 10Gbps
- Input Interface: Type-C
- Hard Disk Interface: M-key, B+M Key
- Compatible SSD Size: 2230/2242/2260/2280
- Weight: 70g
- Dimension: 105mm x 38mm x 12mm
What's in the box?
1 x USB-C to USB 3.0 cable
2 x Mounting Screws
Resources
Installation Guide
Overall, it is a versatile and reliable relay module that allows users to control higher power circuits with ease. It is well-suited for both hobbyists and professionals who are working on projects involving electronic control systems and automation.
Specifications
- Working Voltage: 3V
- Current: 10A
- DIP 5 pins
- Dimension: 20mm x 20mm x 16mm (LxHxW)
- Weight: 10g
What's in the box?
1 x 3VDC 10A Single Pole Double Throw Relay
Are you working on a project involving a fire-detecting robot or a smart system that requires flame detection? This versatile sensor module is tailor-made for your needs. Equipped with a flame sensor and an adjustable digital filter for digital output, it also retains the original analog output. This allows you to seamlessly integrate it into your setup either as a digital input or an analog input sensor, offering the flexibility of a minimum 3-wire interface or an optional 4-wire connection that utilizes both digital and analog functionalities.
Designed to detect fire or other light sources within the wavelength range of 760 nm to 1100 nm, the flame sensor has a pivotal role in scenarios such as fire-fighting robots and soccer robots. With a wide detection angle of 60 degrees and high sensitivity to the flame spectrum, this sensor serves as the "eyes" of the robot, enabling it to identify fire sources or specialized light sources like those used in a soccer game. The module even features M3 mounting holes for convenient installation onto your robot.
Operational within a temperature range of -25 degrees Celsius to 85 degrees Celsius, the flame sensor must maintain a safe distance from the flame during operation to prevent damage. It's compatible with various microcontrollers that support digital or analog input, such as PIC, SK40C, SK28A, SKds40A, and the Arduino series. Moreover, when coupled with a relay module, it can serve as a flame switch for added functionality.Features
- Detect fire, detect light source and sensitive to light with wavelenghth of 940nm
- Interface:Analog or digital
- Supply Voltage: +5 V
- Detection range: 20cm (1V) ~ 100cm (4.8V)
What's in the box?
1 x Flame Sensor Module
Resources
It's built with rectangular shape section, tougher and keeps print bed level better. The thumbwheels under your heat bed might be rotated itself and the weak springs get loosen after long-run printing (due to movement or vibration). If you're tired of leveling your bed constantly, better springs are a very inexpensive upgrade to your 3D printer! With this kind of strong springs, you won't need to level your bed between prints nearly as often.
Specifications
- Outer Diameter (OD): 8mm
- Inner Diameter (ID): 4mm
- Length: 20mm
What's in the box?
4 x Springs
Specifications
- PH: 0,1, 2, 2, 3
- SL: 3, 4, 5, 6, 7mm
- PZ: 0, 1, 2, 2, 3
- SQ: 0, 1, 2, 3
- Torx: 2, 3, 4, 5, 6mm
- 1/8", 5/32", 3/16", 7/32", 1/4"
- Ratchet screwdriver
What's in the box?
36 x Bits
1 x Ratchet screwdriver
• Fits like a glove
• Soft robust PVC
What's in the box?
1 x Silicon Case for micro:bit V2
Please Note: The latest 64-bit distributions of operating systems, as well as Raspberry Pi OS Bookworm are not supported by the official driver for this display. You will need to make use of 32-bit Bullseye.
The Graphic driver is provided and can be downloaded for Raspberry Pi OS/Raspbian. It also supports Ubuntu and Kali Linux. Do follow the steps here: http://www.lcdwiki.com/MHS-3.5inch_RPi_Display
Features
- 3.5-inch TFT LCD screen with high-speed SPI interface
- Compatible with the latest Raspberry Pi 4 Model B
- Graphic drivers can be installed from Github, please refer to the steps here
- Support Raspberry Pi OS/Raspbian, Ubuntu, and Kali Linux Operating System
- Match perfectly with the 3.5-Inch Touch Screen ABS case (not included)
- Comes with 2-pin 5V and GND header to power a cooling fan.
- 3.5 inches LCD Spec:
- Screen Type: TFT
- LCD Driver : ICILI9486
- Touch: Resistive Touch Control
- Touch Controller: XPT2046
- Resolution: 480 * 320
- Refresh Rate: 50Hz
- Interface: SPI (Input 125MHz)
- Backlight: LED
- Backlight Current: 120mA
- Power: 5V
- Operating Environment: -20 ~ 70 ℃
- Size: ~ 89 x 60 x 30mm/3.5 x 2.36 x 1.18"
What's in the box?
1 x 3.5inch RPi LCD
Resources
Installing the graphic driver for the LCD on the Raspberry Pi 4 Model B:
- Please get a microSD card with the latest NOOBS/Raspberry Pi OS/Raspbian, or update the OS.
- Stack the LCD onto Raspberry Pi, before the graphic driver is installed, the Raspberry Pi will output graphics to an HDMI port, so you will need a monitor, mouse, and keyboard to access the terminal.
- Access to Raspberry Pi OS through the terminal or SSH too.
- Install the graphic driver into Raspberry Pi OS
- Execute the following command:
- sudo rm -rf LCD-show
- git clone https://github.com/goodtft/LCD-show.git
- chmod -R 755 LCD-show
- cd LCD-show/
- sudo ./MHS35-show
- After this command, the Raspberry Pi will restart and the graphic will be displayed on 3.5 LCD instead of HDMI port.
- The touch screen works without any special driver, as we tested on the latest Raspberry Pi OS (30 July 2020).
- For more details, please refer to this link: http://www.lcdwiki.com/MHS-3.5inch_RPi_Display
Resistors play an important role in an electronic circuit design. A major benefit of the Resistor Assortment Kit is that it includes all commonly used resistance values. Having the resistor kit on hand will ensure that needed resistors are readily available when constructing and testing your electronic circuit.
The Plusivo Resistor Assortment Kit contains a large assortment of resistors. It includes 30 commonly used resistance values which are:
10 Ω, 22 Ω, 47 Ω, 100 Ω, 15 Ω, 200 Ω
220 Ω, 270 Ω, 330 Ω, 470 Ω, 510 Ω, 680 Ω
1 kΩ, 2 kΩ, 2.2 kΩ, 3.3 kΩ, 4.7 kΩ, 5.1 kΩ
6.8 kΩ, 10 kΩ, 20 kΩ, 47 kΩ, 51 kΩ, 68 kΩ
100 kΩ, 220 kΩ, 300 kΩ, 470 kΩ, 680 kΩ, 1 MΩ
With a total of 600 resistors (all 0.25W), you'll never run out of resistors to use for your electronic projects!
This Resistor Assortment Kit is a joy to use. It comes with a plastic storage box that allows you to easily store the resistors. Just open the box and pick up the resistor you need. Now you have one less problem to worry about. :)
- Premium assorted resistors
- It includes the most common resistor values from 10 Ω to 1 MΩ. High quality assorted ¼ watt-metal film resistors with 1% tolerance
- Resistor assortment set with 600 pcs
- 30 commonly used resistance values, 20 pieces each value
- Durable plastic storage box
- It helps you to always keep the resistors organized, provides storage whenever you want to stock up and helps you to easily transport the kit anywhere - forget about the hassle of finding your needed resistor value.
- Additional items included - red LEDs, a photoresistor and a thermistor
- Box Dimension: 11.7cm x 9cm x 2.6cm
- Weight: 100g
What's in the box?
20 x Resistor 10 Ω
20 x Resistor 22 Ω
20 x Resistor 47 Ω
20 x Resistor 100 Ω
20 x Resistor 150 Ω
20 x Resistor 200 Ω
20 x Resistor 220 Ω
20 x Resistor 270 Ω
20 x Resistor 330 Ω
20 x Resistor 470 Ω
20 x Resistor 510 Ω
20 x Resistor 680 Ω
20 x Resistor 1 kΩ
20 x Resistor 2 kΩ
20 x Resistor 2.2 kΩ
20 x Resistor 3.3 kΩ
20 x Resistor 4.7 kΩ
20 x Resistor 5.1 kΩ
20 x Resistor 6.8 kΩ
20 x Resistor 10 kΩ
20 x Resistor 20 kΩ
20 x Resistor 47 kΩ
20 x Resistor 51 kΩ
20 x Resistor 68 kΩ
20 x Resistor 100 kΩ
20 x Resistor 220 kΩ
20 x Resistor 300 kΩ
20 x Resistor 470 kΩ
20 x Resistor 680 kΩ
20 x Resistor 1 MΩ
Additional items
5 x red LEDs
1 x photoresistor
1 x thermistor
We're aware that the Raspberry Pi 5 generates significant heat due to its powerful nature. If you're seeking a maintenance-free solution, this case/enclosure is perfect for you. It functions as a substantial heatsink while also serving as a case for the Raspberry Pi 5. This design saves you the expense of purchasing separate heatsinks and cases. The aluminum comes with two options case, Open and Close case. The case construction of this Raspberry Pi 5 case provides 10-15°C of passive cooling for Open case and can go up to 25°C for Close case. It's an ideal choice for scenarios requiring completely silent cooling, such as home media centers. Additionally, it offers easy access to your RPi I/O connectors!
Note: Only Black colour option is available for now.
Full Aluminum Passive Cooling Open Case for Raspberry Pi 5
What's in the box?
Resources
https://youtu.be/uOdaYrvMqxc
It also has a little plastic cover for the USB A connector part so it won't short against nearby electronics.
The transfer speed is USB3.0 5Gbps - most microSD cards are not this fast so the bottleneck will be the card, not the reader.
- Compact and lightweight
- Support most of OS: Win7,8,10, MacOS, LINUX
- USB3.0 Speed
- Plug and use
- Support up to 512GB microSD card
- No driver is needed
- Both Read and Write functions
- Dimension: 19mm x 7mm x 41.5mm
What's in the box?
1 x USB SD & Micro SD Card Reader
Resources
This is a heatsink set for Raspberry Pi 5. Raspberry Pi 5 computers deliver great performance and of course, more power will generate more heat for all CPUs. This is especially true for Raspberry Pi 5 as it is the most powerful Raspberry Pi board. With good heat management, this single-board computer will stay cool and cold!
See the below installation using the blue kit
It comes with 4 heatsinks with thermal pads. The thermal pads are for better thermal conductivity. They are particularly for CPU, RAM IC, I/O controller, and LAN chip on Raspberry Pi 5 board.
- 4 pieces heatsink for Raspberry Pi 5
- Material: Aluminum
- All four heatsinks come with fins for better heat dissipation
- Compatible with Raspberry Pi 5 boards
- Comes ready with thermal adhesive tape
- Easy to install
Dimensions
(L x W x H)
1 of 17mm x 17mm x 6mm
1 of 14mm x 10mm x 6mm
1 of 12mm x 12mm x 5mm
1 of 6mm x 5mm x 5mm
What's in the box?
1 x set of Aluminum Heat Sinks
This is a heatsink set for Raspberry Pi 5. Raspberry Pi 5 computers deliver great performance and of course, more power will generate more heat for all CPUs. This is especially true for Raspberry Pi 5 as it is the most powerful Raspberry Pi board. With good heat management, this single-board computer will stay cool and cold!
See the below installation using the blue kit
It comes with 4 heatsinks with thermal pads. The thermal pads are for better thermal conductivity. They are particularly for CPU, RAM IC, I/O controller, and LAN chip on Raspberry Pi 5 board.
- 4 pieces heatsink for Raspberry Pi 5
- Material: Aluminum
- All four heatsinks come with fins for better heat dissipation
- Compatible with Raspberry Pi 5 boards
- Comes ready with thermal adhesive tape
- Easy to install
Dimensions
(L x W x H)
1 of 17mm x 17mm x 6mm
1 of 14mm x 10mm x 6mm
1 of 12mm x 12mm x 5mm
1 of 6mm x 5mm x 5mm
What's in the box?
1 x set of Aluminum Heat Sinks
Atmel's ATMega328P 8-Bit Processor in 28 pin DIP package. It comes with 32K of program space. 23 I/O lines, 6 of which are channels for the 10-bit ADC. Runs up to 20MHz with external crystal. Package can be programmed in circuit. 1.8V to 5V operating voltage! The famous Arduino Deumilanove, and Arduino UNO is using this ATMega microcontroller. Anyhow, this microcontroller is fresh new without any bootloader.
This microcontroller is pre-loaded with Optiboot bootloader (Uno 16MHz). This means you can use Arduino code in your own project without using an actual Arduino Board. No programmer is needed anymore but you still need UC00A and basic circuit. Please select Arduino Uno Board in the Arduino IDE. We are using this microcontroller in our Breadboard Friendly Arduino (BBFuino). Therefore, you can refer to BBFuino's schematic and tutorial for more information.
What's in the box?
1 x IC ATMEGA328P
Each board features a self-adhesive backing and a single board will fit alongside the Raspberry Pi inside most cases - two boards will fit within the footprint of the Raspberry Pi. There's also two mounting holes for M2 screws on each board, to anchor them down!
Specifications- Modular clip function - rapidly snap and unsnap boards and circuits as your project grows
- Self-adhesive backing.
- M2 Mounting Points (screws not included)
- 170 tie points arrange in 34 rows of 5 pins.
- 3.5cm x 4.5cm
- 9.7mm thick, including sticky foam on the bottom
- Weight: 38.9g
What's in the box?
1x Mini Breadboard
Resources