Laser by PiShop

• Easy to assemble
  
• 2 layers, 4 bolts, spacers and nuts included
  
• Will fit Raspberry Zero & Zero W

• Two-part Raspberry Pi case for Pi 3, Pi 4 and Pi 5.
• Easy access to all Pi connectors
• Open design to keep your Raspberry Pi cool
• You can mount a HQ cam onto this case. See the hint at the end of the description.

Case Assembly guide

1. Remove the acrylic protective film from the two plates
2. Install the standoffs first. Push the male part of the short standoffs through the RPi board mounting holes from the bottom upwards. Use the Female Female standoffs as nuts on the top of the RPi board. 
3. Mount the fan and fan grill on the top acrylic plate.
4. Mount the top and bottom acrylic plates using the eight M2.5x8 screws.
5. Connect your fan power cable to the GPIO port.

Please note: Raspberry Pi, camera board, camera cable and tripod are NOT included.

An affordable, simple solution to mounting your Raspberry Pi to your Raspberry Pi High Quality Camera, Global Shutter Camera or HQ M12 Mount Camera. 

This sleek and transparent plate provides a secure and stable platform for attaching your camera to your Raspberry Pi. With its easy assembly process and included hardware, you can quickly and effortlessly set up your camera system.

The clear acrylic construction adds a touch of modernity while allowing for easy visibility of the camera. Enhance your photography and video projects with this durable and aesthetically pleasing mounting plate.

Combine with our affordable flexible tripod for a great project foundation!

What's in the box?

1 x Mount plate
8 x 5mm male to female brass spacers
8 x M2.5 SS nuts
8 x M2.5x4mm SS screws

Assembly guide

1. Install the standoffs first using their male threaded sides. Four on one side of the plate to mount the RPi3/4 and four on the other side of the plate to mount the camera. Secure them in place by tightening their nuts.

• Mounting holes for Arduino Uno R3/R4.
• Size: 145mm x 95mm.
• Ideal for use with Solderless 400 Point Breadboard (included).
• Acrylic board designed and laser cut inhouse.
• Shadow engraved on board for easy breadboard placing.
• Create an easy to use prototyping station
• Different lengths of male to male jumpers 

• Compatible with Raspberry Pi 4 Model B
• Special design to install a cooling fan (size: 30 x 30 x 7mm)
• The cooling fan is DC 5V 0.2A. Fan powers directly from GPIO pins
• Case Material: Clear Acrylic
• Easy to open lid for access to GPIO pins and camera/display connectors

Note: The Raspberry Pi, High Quality Camera and flexible tripod not included)

• Modular Case for RPi4 via the case assembly screws (Included with your Modular Case)
• HighPi Case for RPi4 using bolts and nuts (Not included)
• Raspberry Pi 3 B or Raspberry Pi 4 B boards using standoffs with bolts and nuts (Not included)
• Rapsberry Pi Zero boards using standoffs with bolts and nuts (Not included)

• 4 mounting holes for 100mm mounting points
• 2 mounting holes for 75mm mounting points

• Mecer 19.5" 16 x 9 TFT LED Wide Monitor
  
• LG 20MK400H 19.5inch monitor

• Two-part Raspberry Pi 5 cover plates
• Easy access to all Pi connectors
• Perfect for use with the official active cooler
• Open design to keep your Raspberry Pi cool
• You can mount a HQ cam onto this case. See the hint at the end of the description

Case Assembly guide

1. Peel the acrylic protective film from the two plates
2. Install the standoffs first. Push the male part of the short standoffs through the RPi board mounting holes from the bottom upwards. Use the Female Female standoffs as nuts on the top of the RPi board. 
3. Mount the fan and fan grill on the top acrylic plate.
4. Mount the top and bottom acrylic plates using the eight M2.5x8 screws.
5. Connect your fan power cable to the GPIO port.

• Material: Acrylic
• Colour: Transparent
• Layer: 3-Layer (can fit 3 x RPi 3/4 model B)
• Compatible Model: For Raspberry Pi 4/3/2 B and B