UPS

UPS
Sort By:  
UPS Module for Raspberry Pi Pico, Uninterruptible Power Supply (WS Pico UPS)


Uninterruptible Power Supply for Pico

Keeps your Pico running while recharging, monitoring battery status via I2C

Features at a glance

The Pico-UPS-A is a dedicated UPS (Uninterruptible Power Supply) module designed for Raspberry Pi Pico. It incorporates Li-ion battery switching charger with power path management, and voltage/current monitoring chip, allows monitoring the battery operating status via I2C bus.

  • Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards
  • Incorporates Li-ion battery switching charger with dynamic power path management, more stable power supply
  • I2C bus communication, monitoring the battery voltage, current, power, and remaining capacity in real time
  • Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
  • Onboard recharging indicator, power indicator, and battery warning indicator to check if the battery is connected correctly
  • Comes with development resources and manual (Raspberry Pi Pico C/C and MicroPython examples)

Specifications

  • Recharge voltage: 5V
  • Control bus: I2C
  • Battery support: 14500 Li-ion battery (NOT included)
  • Dimensions: 60 × 21mm

Raspberry Pi Pico header compatibility

onboard female pin header for direct attaching to Raspberry Pi Pico



Raspberry Pi Pico and Li-ion battery are NOT included.

What's On Board

  1. ETA6003
    recharger chip
  2. INA219
    voltage/current monitoring chip
  3. S8261
    Li-ion battery protection chip
  4. FS8205
    Li-ion battery protection MOS
  5. AO3400
    reverse-proof MOS
  6. SI2305
    counter current preventing MOS
  1. Rapsberry Pi Pico header
    for direct attaching to Raspberry Pi Pico
  2. Power switch
  3. Activate button
    activate the protection circuit after replacing battery
  4. 14500 battery holder
Pinout definition



Outline dimensions


What's in the box?

1 x UPS Module for Raspberry Pi Pico

Resources

WIKI: Pico-UPS-A

Need batteries? You will find our battery selection here

R274.90  Inc VAT
Mecer 850VA OFF-LINE UPS (Mecer UPS 850VA black)
Description:

Mecer 850VA OFF-LINE UPS (with AVR,Monitoring Software Cable & Built-in Surge Protection) - Black

Features:

  • 850VA line interactive UPS
  • Microprocessor control guarantees high reliability
  • Boost and buck AVR for voltage stabilization
  • Auto restart while AC is recovering
  • Simulated sine wave
  • Off-mode charging
  • Cold start function
  • USB communication port and RJ-11/RJ-45 protection
  • Overload, discharge, and overcharge protection
R949.90  Inc VAT
Uninterruptible Power Supply UPS HAT (B) for Raspberry Pi, 5V Output, up to 5A Current, Pogo Pins Connector (WS UPS for Pi )



  • Designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B / 4B, etc.
  • I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
  • Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
  • Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi
  • 5V USB output, convenient for powering other boards
  • Batteries warning indicators, easy to check if the battery is connected correctly
  • Comes with development resources and manual


Specifications

  • OUTPUT VOLTAGE: 5V    
  • CHARGER: 8.4V 2A
  • CONTROL BUS: I2C    
  • DIMENSIONS: 56 × 85mm
  • BATTERY SUPPORT: 2x 18650 Li batteries(NOT included)    
  • MOUNTING HOLE SIZE: 3.0mm













(** Raspberry Pi, Cables are for reference ONLY, the Raspberry Pi, cables and Fan HAT are NOT included.)









What's in the box ?

1 x UPS Hat (B)
1 x 8.4v Battery Charger 
1 x Acrylic protection panel
1 x Screws pack 

  • The 18650 batteries are NOT included
  • Please note that the battery length SHOULD be less than 67mm, some batteries with protection plate in the market are NOT supported, learn more.


Resources

WIKI: UPS_HAT_(B)

Need batteries? You will find our battery selection here
R499.90  Inc VAT
Mecer 2000VA / 1200W OFF-LINE UPS - Black (Mecer UPS 2000VA)
Description:

Output:
- AC Voltage Regulation(Batt. Mode): ±10%
- Frequency Range (Batt.Mode): 50Hz or 60Hz ± 1 Hz
- Transfer Time: Typical 2-6 ms, 10 ms max
- Waveform (Batt. Mode): Simulated Sine Wave

Alarm:
- Battery Mode: Sounding every 10 seconds
- Low Battery: Sounding every second
- Overload: Sounding every 0.5 second
- Fault: Continuously sounding

Includes:
- 1x UPS Unit
- 2x Male to Female Extension Power Cord IEC C13-C14 Serial (From UPS to PC)
- 1x USB cable (From UPS to PC)

Specifications:
- Dimensions: 397 x 146 x205
- Weight: 11.5kg

NO Dedicated Power cord with kettle plug (sold separately)

Please Note:
A UPS is not designed to provide continuous power, merely a window period that allows a computer or other user to finalise the work at hand and shut down. It's ability to do this is dependent on the number of devices connected to the UPS. 
To establish what you can and cannot connect, calculate the total wattage you need to supply and ensure that the UPS you purchase meets that requirement.

What's in the box?

1 x Mecer 2KVA UPS
2 x Mate to Female Extension Cables
1 x Software Disk
1 x USB Cable
1 x User Manual
R2,199.90  Inc VAT
UPS Module for Raspberry Pi Pico, Uninterruptible Power Supply, Li-po Battery, Stackable Design (Pico Li-po UPS)
Uninterruptible Power Supply for Pico

Keeps your Pico running while recharging, monitoring battery via I2C, stackable design

SAFETY PRECAUTIONS

  • Li-ion and Li-po batteries are quite unstable. They may cause fire, personal injury, or property damage, if they're not properly recharged or used.
  • Do not reversely connect the polarities when recharging or discharging the battery. Do not use inferior charger/charging panel to recharge the battery.
  • Do not mix use old batteries with new ones, avoid using batteries of different brands.
  • When buying Lithium battery, should always make sure the battery specification is compatible with the expansion board. Choose batteries from formal manufacturer, and ensure the batteries will work stably and safely by aging test.
  • Lithium batteries have limited cycle life, they will also deteriorate as time goes by. Should be replaced with new ones when the batteries reaching their max cycle life, or working over two years, whichever comes first.
  • Should be placed carefully and properly, keep it away from inflammables and explosives articles, away from children, avoid any safety accident caused by careless storage.

Features at a glance

The Pico-UPS-B is a dedicated UPS (Uninterruptible Power Supply) module designed for Raspberry Pi Pico. It incorporates Li-po battery switching charger with power path management, and voltage/current monitoring chip, allows monitoring the battery operating status via I2C bus. What's more, the male pin header make it possible to "stack" other modules on top.

  • Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards
  • Incorporates Li-po battery switching charger with dynamic power path management, more stable power supply
  • I2C bus communication, monitoring the battery voltage, current, power, and remaining capacity in real time
  • Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, more safe and stable
  • Onboard recharging indicator, power indicator, easy to check the battery status
  • Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)
Specifications

  • Recharge voltage: 5V
  • Control bus: I2C
  • Battery support: 600mAh 3.7V Li-po battery
  • Dimensions: 60 × 21mm

Raspberry Pi Pico header compatibility

onboard female pin header for direct attaching to Raspberry Pi Pico,
male pin header for stacking other modules



Raspberry Pi Pico and Pico-LCD-0.96 are NOT included. 

What's On Board

  1. ETA6003
    recharger chip
  2. INA219
    voltage/current monitoring chip
  3. S8261
    Li-po battery protection chip
  4. FS8205
    Li-po battery protection MOS
  5. AO3400
    reverse-proof MOS
  6. SI2305
    counter current preventing MOS
  1. Rapsberry Pi Pico header
    for direct attaching to Raspberry Pi Pico
  2. Power switch
  3. Activate button
    activate the protection circuit after replacing battery
  4. Battery header
    for connecting 3.7V Li-po battery
Pinout definition



Outline dimensions


What's in the box?

1 x UPS Module for Raspberry Pi Pico

Resources


Need batteries? You will find our battery selection here

R296.90  Inc VAT
Mecer DC UPS-5200 Lithium Battery On-line UPS (DC 5200mAh UPS router)

Mecer UPS-5200 7.4V 5200MAh Lithium Battery Online UPS.
For WiFi Router and ONT.
With 2 way DC connector split, Autostart when plugged in.
Multi-colour indicator, Built-In Li-ion battery.

Technical Specifications

- Built-in Li-ion battery
- Microprocessor control guarantees high reliability
- Manual power off switch
- Auto start when plugged in
- Multi-color indicator
- Overload, short-circuit, over-charge, and over-discharge protection

Dimensions(LxWxH) mm

160 x 194 x 75 mm

What's in the box?

1 x Mecer DC UPS-5200 Lithium Battery On-line UPS
1 x Power Cord
1 x Pack of six connector types

R862.50  Inc VAT
R999.90
Quad 18650 Lithium Battery Shield V8 Mobile Power Expansion Board Module 5V/2.2A 3V/1A with USB (quad 18650 UPS USB)
PLEASE NOTE: Misusing or mishandling a lithium-ion battery may cause a FIRE or EXPLOSION which can result in INJURY or DEATH.

Make sure you insert the batteries correctly.

The Quad 18650 Lithium Battery Shield V8 Mobile Power Expansion Board Module is the perfect solution for those looking for more power to their projects on-the-go. This module allows you to use four 18650 lithium batteries to power your device, and provides both 5V/2.2A and 3V/1A outputs through a USB connection.

The compact and lightweight design of this module makes it easy to incorporate into any project.

Whether you're looking to power a larger DIY project, a Raspberry Pi, or any other mobile device, this Lithium Battery Shield is a reliable and convenient option. With its versatile outputs and easy-to-use USB connection, you'll have everything you need to power your project on-the-go.

What's in the box?

1 x Quad 18650 Lithium Battery Shield Expansion Board

Resources

Unboxing video available at https://youtu.be/LRWqA2Zy9Zo

This module is a portable power bank that supports two voltage outputs of 3V at 1A and 5V at 2.2A! The rated current of the 5V output is 2.2A, and the maximum supported current is 3A (do not exceed or hold the output at this rating). The current output depends on the quality of the 18650 batteries used.

Micro-USB charging at 600-800mA

When the switch is toggled to NORMAL and the current output is less than 30mA, the unit will automatically shutdown in about 10 seconds. This will put the shield into standby mode.
When the switch is toggled to HOLD, the shield will remain on regardless of the power usage situation until the battery is empty.

Incorrect installation of the batteries will damage the module!

R239.90  Inc VAT
R295.90
Volkano Notion series Mini UPS Wifi / Router backup (Volk notion wifi ups)

Looking for a reliable power backup solution for your home or office? Check out the Volkano Notion series Mini UPS! This compact and portable device provides uninterrupted power supply to your Router through Loadshedding. With its intelligent charging technology and long-lasting battery, you can trust the Volkano Notion series Mini UPS to keep your devices running smoothly and protect them from power surges. Don't let power interruptions disrupt your work or entertainment - get the Volkano Notion series Mini UPS today and stay powered up!

Specifications

  • Basic Capacity: 4,400 mAh @ 3.7 V
  • Battery Type: 18650 Li-ion (2 units)
  • Size (mm): 96 49 41
  • Weight: 175 g
  • Input Voltage: 12.0 1.2 V DC
  • Input Current: 2.0 A Output Voltage: 12.0 1.2 V DC
  • Charge Time: 6-8 hours to fully load an empty battery


Operating Times

  • On a full charge a single Notion will power a router, fibre
  • APON box, range extender, access point or any other
  • 12 V DC network device for up to 4 hours.
  • Using the included splitter cable, a single Notion will power
  • 2 network devices e.g. a fibre APON plus a Wi-Fi router for up to 4 hours.

What's in the box?

1 x Volkano Notion Series Mini UPS
2 x 1 m DC Splitter Cable
1 x Instruction manual

R499.90  Inc VAT
Volkano Constant series Mini UPS (Volkano Constant UPS)
The Volkano Constant series Mini UPS is a compact device that acts as a power bank for your WiFi during power outages. It has dual DC outputs for running two devices simultaneously and includes a USB charge port. With support for Power Over Ethernet (POE), it can power compatible devices with a single cable. The LED indicator shows the remaining power, and it automatically switches from AC to DC power during power failures. It comes with a dual DC power cable, mains cable, and a 1.8-meter DC power cable with a splitter. The Mini UPS offers electric leakage, overcharge, and overdischarge protection. It ensures uninterrupted WiFi connectivity, making it essential for homes and offices.

Features


  • Up to 4 hours of power
  • 8800 MAH high power batteries
  • Suitable for wired or wireless networks
  • Suitable for CCTV systems
  • Dual DC output for 2 devices
  • USB port for third device
  • LED power indicator
  • Power Over Ethernet

Specifications

  • Input: 110 ~ 240VAC
  • Output Port 1: DC 9V / 12V
  • Output Port 2: DC 15V / 24V
  • Output Port 3: USB DC 5V @ 2.5 Amp
  • Output Port: 4 POE DC 15V / 19V / 24V
  • Battery Capacity: 8800mAh
  • Typical Runtime: 3 Hours (Fibre Terminal + Router)
  • Total Output Power: 17 Watt


What's in the box?

1 x Volkano Constant series Mini UPS

R862.90  Inc VAT
Volkano Sustain Series Mini UPS (Volkano Sustain UPS)
The Volkano Constant Mini UPS is packed with features and specifications to ensure uninterrupted internet connectivity in your home or office. It keeps your WiFi running for up to 4 hours during power outages, making it ideal for situations like load shedding or power failures. The device seamlessly switches from AC to DC power when the AC supply fails, providing a reliable backup. It includes both a dual DC power cable and a mains cable for flexible usage. Safety is a priority with electric leakage protection and overcharge/over-discharge protection. Additionally, the Mini UPS supports Power over Ethernet (PoE), allowing you to power compatible devices with ease. With the Volkano Constant Mini UPS, you can stay connected and productive even during unexpected power disruptions.

Features

  • Keep your home/ office internet connected during power outages for up
  • to 4 hours.
  • Ideal for maintaining WiFi during load shedding or a power failure
  • Auto switches from AC to DC power when AC fails
  • Includes dual DC power cable and Mains cable
  • Electric leakage protection
  • Overcharge/ Over-discharge protection
  • PoE (Power over Ethernet support


Specifications

  • Input: 110 ~ 240VAC
  • Output Port 1: DC 9V
  • Output Port 2: DC 12V
  • Output Port 3: USB DC 5V at 2.1 Amp
  • Output Port: 4 PoE DC 24V
  • Battery Capacity: 8800mAh
  • Typical Runtime: 4 Hours (Fibre Terminal + Router)

What's in the box?

1 x Volkano Sustain Series Mini UPS
R546.90  Inc VAT
5V UPS HAT (D) for Raspberry Pi for 21700 batteries (5V UPS HAT (D))
Uninterruptible Power Supply For Raspberry Pi

Supports Charging And Power Output At The Same Time, With Dynamic Path Management, Stable 5V Output

Comes with online development resources and manual


Features At A Glance

The UPS HAT (D) is an uninterruptible power supply (UPS) expansion board specially designed for the Raspberry Pi series. Onboard switching Li battery charging chip with path management, boost converter chip, and voltage/current monitoring chip which can monitor the operating state of the batteries via the I2C interface.

  • Adopts pogo pins connector design, compatible with Raspberry Pi 3 / 3B+ / 4B, etc.
  • Onboard Li battery charging chip, with dynamic path management, more stable power supply
  • Onboard boost converter chip for stable 5V power output
  • I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
  • Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, more safe and stable
  • Onboard MCU management, supports detecting power connection and booting the Raspberry Pi
  • Supports displaying battery level on the system, easy to check the battery remaining capacity
  • Onboard LED indicators for monitoring the battery operating status
  • Comes with online development resources and manual
Specifications

OUTPUT VOLTAGE5V
CONTROL BUSI2C
BATTERY SUPPORT21700 Li battery × 2 (in parallel, NOT included)
CHARGER SUPPORT5V (Type-C port)
DIMENSIONS56 × 85mm
MOUNTING HOLE SIZE3.0mm


Dynamic Path Management, More Stable Power Supply
  • When connected to the external power supply, the system will be powered and the battery will be charged at the same time, and the battery will be disconnected after being fully charged to avoid battery life damaging caused by frequent charging and discharging
  • When the external power supply is insufficient, the battery will provide power output together with the external power supply at the same time to ensure system normal operation
  • When the external power supply is connected, the system will keep running normally even when the battery fails or is taken out. And automatically switch over to batteries output if the external power supply is unavailable, keeps the system running without any trouble

Supports 21700 Large Capacity Li Battery,
Longer Battery Life

Onboard Warning Indicators, Easy To Check If The Battery Is Connected Correctly

Pogo Pins Connector

Powering The Raspberry Pi Via Pogo Pins, Without Using Any GPIO Resource,
Compatible With Raspberry Pi 3 / 3B+ / 4B, Etc.

Real Time Monitoring

Monitoring The Batteries Voltage, Current, Power, And Remaining Capacity Via I2C

When the voltage dips too low, it is possible to save files properly and then shut down the system by software, to avoid any data loss

Supports Battery Level Display And
Detecting Power Connection

Easy To Check The Battery Status In Real-Time, And Automatically Shutdown When The Battery Level Is Low. Onboard MCU Chip For Detecting Power Connection And Automatically Rebooting The Raspberry Pi



Outline Dimensions





What's in the box?


1 x UPS HAT (D)
1 x Acrylic protection panel
1 x Screws pack

You might need to grab some 21700 batteries

Resources

Wiki: http://www.waveshare.com/wiki/UPS_HAT_(D)

R538.90  Inc VAT
Per Page      1 - 11 of 11
  • 1