Other Cables/Adapters
Other Cables and Adapters
This micro SD card to SD card extension cable is perfect for protecting your Raspberry Pi's micro SD card port.
This micro SD card to micro SD card extension cable is perfect for protecting your Raspberry Pi's micro SD card port.
Need to move a HAT away from Your Raspberry Pi for some reason? This is what you'll need. Ideal for your Pi400
Jumper Cables Male to Female ribbon of 40 x 300mm (m2f jumpers 30cm)
These premium jumper cables are a little over 300mm long. Perfect for connecting sensors to breadboards or microcontrollers.Specifications
Features
What's in the box?
40 x 200mm Male to Female Jumper cables
- Ribbon of 40 x 300mm
- Male to Female
Features
- Tested for Compatibility with the Raspberry Pi
- Breadboard compatible
- Colour: Multi-coloured
What's in the box?
40 x 200mm Male to Female Jumper cables
A/V Composite Cable - 3.5mm to 3 x RCA - 2m (4Pole-RCA)
Description:
Notes on RPi4
By default the composite output on the Pi 4 is disabled because it slows the system down. You need to add this to config.txt
enable_tvout=1
What's in the box:
1 x A/V Composite Cable
Got a TV with no HDMI input, but still want to hack your Raspberry Pi? Don't worry! The Raspberry Pi comes equipped with a neat 4-Way Composite Video/Audio Jack, and we've got just the cable for you!
Plug this cable into your Raspberry Pi's composite 3.5mm Jack, and your Pi will output Video (1-line) and Audio (2-lines) via the three RCA connectors.
Specification:Connector Layout
- Red - Video
- Yellow - Right Audio
- Black - Left Audio
- Tested for Compatibility with the Raspberry Pi
- Gold Plated Connectors
- 3m Long
- Colour: Black
- Connector Type A: 4-Way 3.5mm Audio Jack
- Connector Type B: 3 x RCA Connectors
- 1 x Composite Cable - 3.5mm to 3 x RCA
Helpful Tips
- On first startup (when installing an OS via the NOOBs distribution), hold 3 at boot for PAL, or 4 at boot for NTSC. This will force output via composite insted of HDMI .
- If you have installed an operating system with an HDMI cable, and want to change to composite hold SHIFT 3 at boot for PAL, or SHIFT 4 at boot for NTSC
Notes on RPi4
By default the composite output on the Pi 4 is disabled because it slows the system down. You need to add this to config.txt
enable_tvout=1
What's in the box:
1 x A/V Composite Cable
Jumper cables Male to Male Pack of 65 (65 m2m jumpers)
Jumper Sizes
These male to male breadboard jumper wires provide an easy way for you to build your own circuitry on a breadboard. These cables are flexible with both ends of a prototyping board connector. The jumper wire is ideal for creating circuits between your microcontroller and breadboard.
Specifications
- Material: plastic tin plated copper
- Random colours: white, yellow, orange, blue, black and red (as shown in picture)
- Outer Diameter: 0.643mmNominal Wire Area: 0.3247 sq. mm
Jumper Sizes
- 4 x 175mm wires
- 4 x 230mm wires
- 8 x 125mm wires
- 49 x 95mm wires
What's in the box?
1 x Pack of 65 x Jumper Wires for Solderless Breadboard
Resources
Dedicated 40-Pin Rainbow Female to Female ribbon Cable for Raspberry Pi (20cm) (40 pin ribbon F2F)
Description:
1 x Female to Female ribbon Cable
Raspberry pi 40 pin Female to female flat ribbon cable specifically designed to fit directly onto the GPIO Headers pins of the Raspberry Pi.
Specifications:- 40 pin
- Female to female
- GPIO Header connector
- 20cm long
1 x Female to Female ribbon Cable
Jumper Cables Female to Female Ribbon of 40 x 300mm (f2f jumpers 30cm)
Female to Female Jumper Wire Cable Line Multicolored 300mm
Specifications
What's in the box?
1 x Ribbon of 40 lines
Resources
Specifications
- Multicolored
- 300mm
- Female to Female
What's in the box?
1 x Ribbon of 40 lines
Resources
Flat Ribbon Cable 40 Way - 2 Meter lenghts (40 ribbon/2m)
Description:
Looking for a neat way to connect data transmission devices? This 40-way flat ribbon cable is commonly used with computers and audio and digital equipment. It provides a simple solution to mass termination.
Features:
28 AWG
Extended temperature rating: -20oC to 85oC
Insulation: Polyvinyl chloride (PVC)
Stranded copper wire
Sold Per 2 Meter length
What's in the box?:
2m x Flat Ribbon Cable
Looking for a neat way to connect data transmission devices? This 40-way flat ribbon cable is commonly used with computers and audio and digital equipment. It provides a simple solution to mass termination.
Features:
28 AWG
Extended temperature rating: -20oC to 85oC
Insulation: Polyvinyl chloride (PVC)
Stranded copper wire
Sold Per 2 Meter length
What's in the box?:
2m x Flat Ribbon Cable
Raspberry Pi Camera Board Replacement Cable 300mm (Cam csi cable 300mm)
What's in the box?
1 x Camera Board Replacement Cable
The Raspberry Pi Camera Module comes fully assembled with a 15-Way 150mm flat, flex cable that plugs directly in the Raspberry Pi CSI port. Unfortunately the included cable is quite fragile, and can break if twisted or bent too far.
Don't worry though, not all is lost if that cable does happen to break! Replacement raspberry pi camera board cables are available and it's very easy to swap them over!
Features
- Direct Replacement for the Raspberry Pi Camera Board Cable
- 300mm Overall Length
- 1mm Pitch
- 15 Way Flat Cable
- Conductor: Tin plated copper
- Insulation: White PVC
- Supporting tape: Blue polyester
- UL rating: UL2896
- Temperature rating: 80°C
- Voltage: 30V
- Flame test: VW-1, FT1, FT2
- CSA Standard: CAN/CSA-22.2 No.210.2
What's in the box?
1 x Camera Board Replacement Cable
120Pcs 10cm Breadboard Jumper Cable Kit (3 jumper kit 10cm)
Features
Specifications
What's in the box?
1 x ribbon of 40pcs male to male jumpers
1 x ribbon of 40pcs female to female jumpers
1 x ribbon of 40pcs male to female jumpers
- 40pcs chromatic male to male color jumpers
- 40pcs chromatic color female to female jumpers
- 40pcs chromatic male to female color jumpers
- Durable and reusable
- Easy to use
- A popular choice for constructing electronic projects
- Use for electronic projects as including Raspberry Pi and Arduino projects
Specifications
- Length:10cm
- Compatible with 2.54mm spacing pin headers and breadboards
What's in the box?
1 x ribbon of 40pcs male to male jumpers
1 x ribbon of 40pcs female to female jumpers
1 x ribbon of 40pcs male to female jumpers
Micro SD to SD Extension Cable 45cm (micro to SD ext cable)
What's in the box?
1 x Micro SD to SD Extension Cable
This micro SD card to SD card extension cable is perfect for protecting your Raspberry Pi's micro SD card port! The flat flex cable is 45cm long, so it's perfect for mounting your SD card separately for easy access, or mounting your Raspberry Pi safely within an enclosure!
Micro SD to SD Extension Cable Features
- Micro SD Card Male to Full Size SD Card Female
- SD Card Plastic Housing Case: 51mm x 35mm x 11mm
- Flex Cable ~ 45cm
- Supports SD Card Sizes: 16GB, 32GB 64GB 128GB
- Supports SD/SDHC/SDXC Cards
- Push/Push SD Card Slot
What's in the box?
1 x Micro SD to SD Extension Cable
This micro SD card to SD card extension cable is perfect for protecting your Raspberry Pi's micro SD card port.
White Nylon Zip Cable Tie Label Strap Strip With Marking Tag 3X100mm(50 pack) (label cable ties 50)
Made from heavy duty nylon material, self-locking, excellent security. One use ties, no release tab to make looser for excellent security.
Keep all kinds of cord-cables well organized and tidy in place, used to tie up speaker cables, guitar cables, TV cables, microphone mic, computer cables, and much more.
Can write directly onto the tag, help you know which cable is headed where and remember which cable is which.
Using a sharpie to Write make a perfect combination to ending cable madness! can use them in the garden, office, garage, workshop, around the house and more.
Specifications
Features
What's in the box?
50 x Nylon Zip Cable Tie Labels
Keep all kinds of cord-cables well organized and tidy in place, used to tie up speaker cables, guitar cables, TV cables, microphone mic, computer cables, and much more.
Can write directly onto the tag, help you know which cable is headed where and remember which cable is which.
Using a sharpie to Write make a perfect combination to ending cable madness! can use them in the garden, office, garage, workshop, around the house and more.
Specifications
- Material: nylon
- Colour: white
- Cable Size: 100mm x 3mm(L*W)
- Tag Size: 20mm x 13mm(L*W)
- Quantity: 50pcs
Features
- Nylon cable tie label
- Made from high quality nylon 66 material, UL recognized
- Durable,acid-resistance, anti-rust,anti-aging,insulating
- Unique marking tag design, enable you to mark the different cables when connected, easy to recognize.
- Widely used in bundled cables for TV, computer, appliances, lighting, electrical, electronic toys and other products lines
What's in the box?
50 x Nylon Zip Cable Tie Labels
Raspberry Pi Camera Board Replacement Cable 1000mm (Cam csi cable 1000mm)
Description:
The Raspberry Pi Camera Module comes fully assembled with a 15-Way 1000mm flat, flex cable that plugs directly in the Raspberry Pi CSI port. Unfortunately the included cable is quite fragile, and can break if twisted or bent too far.
The Raspberry Pi Camera Module comes fully assembled with a 15-Way 1000mm flat, flex cable that plugs directly in the Raspberry Pi CSI port. Unfortunately the included cable is quite fragile, and can break if twisted or bent too far.
Don't worry though, not all is lost if that cable does happen to break! Replacement raspberry pi camera board cables are available and it's very easy to swap them over!
This replacement cable is 1000mm long.
The Raspberry Pi Camera Board Replacement Cable Features:
- Direct Replacement for the Raspberry Pi Camera Board Cable
- 1000mm Overall Length
- 1mm Pitch
- 15 Way Flat Cable
- Conductor: Tin plated copper
- Insulation: White PVC
- Supporting tape: Blue polyester
- UL rating: UL2896
- Temperature rating: 80°C
- Voltage: 30V
- Flame test: VW-1, FT1, FT2
- CSA Standard: CAN/CSA-22.2 No.210.2
Micro SD to Micro SD Extension Cable 45cm (micro SD to micro SD ext)
What's in the box?
1 x Micro SD Extension Cable
This micro SD card to micro SD card extension cable is perfect for protecting your Raspberry Pi's micro SD card port! The flat flex cable is 45cm long, so it's perfect for mounting your SD card separately for easy access, or mounting your Raspberry Pi safely within an enclosure!
Features
- Micro SD Card Male to Micro SD Card Female
- Flex Cable ~ 45cm
- Supports SD Card Sizes: 16GB, 32GB 64GB 128GB
- Supports SD/SDHC/SDXC Cards
What's in the box?
1 x Micro SD Extension Cable
This micro SD card to micro SD card extension cable is perfect for protecting your Raspberry Pi's micro SD card port.
5P Cable for Arcade Game Controller Joystick (Joystick ribbon cable)
For use with arcade joysticks that use header cables
Looking for spare joystick cables, or did yours break? Replace them quickly and easily with these cables.
Features
Length: 20cm
What's in the box?
1 x 5P ribbon Cable
Looking for spare joystick cables, or did yours break? Replace them quickly and easily with these cables.
Features
Length: 20cm
What's in the box?
1 x 5P ribbon Cable
For use with arcade joysticks that use header cables
PJ-392 3-Pin 3.5mm Stereo Headphone Audio Video Jack Socket Plug With Nut (headphone socket)
Jack plugs and sockets are widely found in audio and audio-video applications and are most commonly used for analogue audio signals like the 3.5mm jack found on your earphones. With this socket you can now add this funtionality to your project.
Specifications
What's in the box?
1 x Stereo Headphone Audio Video Jack Socket
Specifications
- Model: PJ-392
- Size(LxWxH): Approx. 22.5mmx 8mm x 8mm/ 0.89x3.15x3.15"
What's in the box?
1 x Stereo Headphone Audio Video Jack Socket
50cm XH2.54 4pin to 6pin White Terminal stepper Motor Connector cable (stepper cable 4 to 6pin 55cm)
A collection of jumper cables with XH2.54 connectors on each side. Great for wiring your stepper motor to your driver board. Widely used on 3D printers, robotics and CNC machines.
Specifications
What's in the box?
1 x 3D Printer Stepper Motor Line 50cm Length
Specifications
- Four-lead motor connector XH2.54 white terminal 4pin-6pin motor line
- 3D Printer Stepper Motor Line
- Connector : 4pin to 6pin
- Length: 50cm
What's in the box?
1 x 3D Printer Stepper Motor Line 50cm Length
Raspberry Pi Camera Board Replacement Cable 150mm (Cam csi cable 150mm)
Description:
The Raspberry Pi Camera Module comes fully assembled with a 15-Way 150mm flat, flex cable that plugs directly in the Raspberry Pi CSI port. Unfortunately the included cable is quite fragile, and can break if twisted or bent too far.
The Raspberry Pi Camera Module comes fully assembled with a 15-Way 150mm flat, flex cable that plugs directly in the Raspberry Pi CSI port. Unfortunately the included cable is quite fragile, and can break if twisted or bent too far.
Don't worry though, not all is lost if that cable does happen to break! Replacement raspberry pi camera board cables are available and it's very easy to swap them over!
This replacement cable is 150mm long.
The Raspberry Pi Camera Board Replacement Cable Features:
- Direct Replacement for the Raspberry Pi Camera Board Cable
- 150mm Overall Length
- 1mm Pitch
- 15 Way Flat Cable
- Conductor: Tin plated copper
- Insulation: White PVC
- Supporting tape: Blue polyester
- UL rating: UL2896
- Temperature rating: 80°C
- Voltage: 30V
- Flame test: VW-1, FT1, FT2
- CSA Standard: CAN/CSA-22.2 No.210.2
Dedicated 40-Pin Rainbow Male to Female ribbon Cable for Raspberry Pi (10cm) (40 pin ribbon M2F)
Description:
What's in the box?
1 x male to female ribbon Cable
Raspberry pi 40 pin male to female flat ribbon cable specifically designed to fit directly onto the GPIO Headers pins of the Raspberry Pi on one side and a HAT on the other.
Please note: Pi400 is not included
- 40 pin
- male to female
- GPIO Header connector
- 10cm long
What's in the box?
1 x male to female ribbon Cable
Need to move a HAT away from Your Raspberry Pi for some reason? This is what you'll need. Ideal for your Pi400
Raspberry Pi Camera Board Replacement Cable 2000mm (Cam csi cable 2000mm)
Description:
The Raspberry Pi Camera Module comes fully assembled with a 15-Way 2000mm flat, flex cable that plugs directly in the Raspberry Pi CSI port. Unfortunately the included cable is quite fragile, and can break if twisted or bent too far.
Don't worry though, not all is lost if that cable does happen to break! Replacement raspberry pi camera board cables are available and it's very easy to swap them over!
The Raspberry Pi Camera Module comes fully assembled with a 15-Way 2000mm flat, flex cable that plugs directly in the Raspberry Pi CSI port. Unfortunately the included cable is quite fragile, and can break if twisted or bent too far.
Don't worry though, not all is lost if that cable does happen to break! Replacement raspberry pi camera board cables are available and it's very easy to swap them over!
This replacement cable is 2000mm long.
The Raspberry Pi Camera Board Replacement Cable Features:
- Direct Replacement for the Raspberry Pi Camera Board Cable
- 2000mm Overall Length
- 1mm Pitch
- 15 Way Flat Cable
- Conductor: Tin plated copper
- Insulation: White PVC
- Supporting tape: Blue polyester
- UL rating: UL2896
- Temperature rating: 80°C
- Voltage: 30V
- Flame test: VW-1, FT1, FT2
- CSA Standard: CAN/CSA-22.2 No.210.2
What's in the box:
1 x 2000 mm Raspberry Pi Camera cable
1 x 2000 mm Raspberry Pi Camera cable
Set with 10 cables 25cm 5 colours with booted crocodile clips (25cm croc jumpers set 10)
This bundle contains ten leads with crocodile clips at each end
Two of each of five colour cords: black, green, red, white and yellow
The PVC sleeves on the crocodile clips match the colour of the cables
This bundle is ideal for use with your micro:bit
Specifications
- Material: 304 Stainless Steel.
- Length: 25 mm.
- Jaws Open: 6.2 mm.
- Socket: crocodile clips
What's in the box?
10 x booted crocodile clips
SD to SD Extension Cable 45cm (SD to SD ext)
Description:
What's in the box?:
1 x SD Extension Cable
This SD card to SD card extension cable is perfect for protecting your SD card port! The flat flex cable is 45cm long, so it's perfect for mounting your SD card separately for easy access.
SD to SD Extension Cable Features:
- SD Card Male to SD Card Female
- Flex Cable ~ 45cm
- Supports SD Card Sizes: 16GB, 32GB 64GB 128GB
- Supports SD/SDHC/SDXC Cards
What's in the box?:
1 x SD Extension Cable