HDMI/VGA/DVI cables/adapters

Pi ZERO USERS PLEASE NOTE: To the best of our knowledge this type of converter draws too much power from the HDMI port to use on the Raspberry pi ZERO. It could end up killing the ZERO.

No issues have been reported on the Pi3 with prolonged use.

Pi-View is a high quality, high performance, convenient and compact electronic device which converts the digital HDMI video signals which are outputted from Raspberry Pi, into an analogue signal required by the widely used VGA based computer displays still widely used around the world.

Set Up

If you havea VGA monitor, you'll need a PiView and a VGA Male to Male Cable to connect your Raspberry Pi.

Pi ==> Pi-View ==> VGA Cable ==> Monitor

• Simple device design in the form of a small adaptor with integrated VGA socket output, with short cable complete with HDMI plug for connection to the HDMI socket on Raspberry Pi.
• No external power supply is required, and in operation, the device is plug and play.
• The device handles display resolutions of up to 720p/1080i/1080p (the maximum resolution is limited by the resolution supported by the connected display device).
• Input: Integrated Type-A HDMI plug
• Output: Standard female DE-15 connector.
• Material: 99% high-purity oxygen-free copper wire core, 30μ gold-plated terminals for minimal signal loss, and gold-plated HDMI plug for high abrasion resistance.

These 2m Super VGA High Resolution VGA Monitor Cables are designed to a provide high quality video connection for your Raspberry Pi, PC, Laptop, Monitor or TV. The cable is constructed using 28AWG triple mini coaxial cables which allows them to be used for extended distances. Triple shielded with braid, foil and drain wire. Our cables are designed for standard monitors and widescreen LCD’s that require DDC cable.

• Tested for Compatibility with the Raspberry Pi
• Premium 15 pin VGA/SVGA
• Male to Male Cable
• Quality cable to connect a VGA or SVGA device such as most monitors, projectors, KVM switches and some TVs, to a VGA / SVGA output on a computer.
• 28AWG Triple Shielded
• HD 15 - All Data Pins Connected
• 2m Long

These 1m Gold Plated Mini HDMI C to HDMI cables are the perfect low cost solution to connecting your Raspberry Pi Zero to your HDMI monitor or TV. This is the latest high speed version V1.4 with Ethernet, 3D and CEC support!

Please read this fitment note, if you're planning on using this cable with the Official Raspberry Pi Case

The 1m Mini HDMI to HDMI Cable Features:

• Tested for Compatibility with the Raspberry Pi Zero
• Mini HDMI C Male (19 Pin) to HDMI Male (19 Pin)
• 1m Long
• 24k Gold-Plated Contacts Prevents Corrosion for Life-Long Optimum Signal-Transfer
• Fully CEC, Ethernet and 3D over HDMI enabled (V1.4 Connection)
• Supports 4K2K, 2160p, 1440p, 1080p, 720p and 480p Resolutions
• Supports 3D Content, Supports Audio Return Channel, Supports True HD Dolby 7.1 and DTS-HD Master Audio
• 30AWG Wire
• 3 Year Warranty

Want to hook your Raspberry Pi Zero up to your HDMI Monitor? You'll need this Mini-HDMI to full size HDMI adaptor!

This one's in white, and comes with gold plated connectors!

Adaptor Guide:

Pi Zero ==> Mini HDMI (Male) to HDMI (Female) Adaptor ==> HDMI Cable ==> Monitor

Features:

• Mini HDMI Male to HDMI Female
• Gold plated connectors for flawless signal transference
• CE and ROHS Compliant
• For the Raspberry Pi Zero

These 0.5m Gold Plated HDMI to HDMI cables are the perfect low cost solution to connecting your Raspberry Pi to your HDMI monitor or TV. This is the latest high speed version V1.4 with Ethernet, 3D and CEC support!

Excellent for use in media applications to tuck your Pi away behind your TV!

The 0.5m HDMI to HDMI Cable Features:

• Tested for Compatibility with the Raspberry Pi
• HDMI Male (19 Pin) to HDMI Male (19 Pin)
• 0.5m Long
• 24k Gold-Plated Contacts Prevents Corrosion for Life-Long Optimum Signal-Transfer
• Fully CEC, Ethernet and 3D over HDMI enabled (V1.4 Connection)
• Supports 4K2K, 2160p, 1440p, 1080p, 720p and 480p Resolutions
• Supports 3D Content, Supports Audio Return Channel, Supports True HD Dolby 7.1 and DTS-HD Master Audio
• 30AWG Wire
• 3 Year Warranty
• Dimensions 22.4 x 15.2 x 2.8 cm
• Weight 141 g

The 2m HDMI to HDMI Cable Features:

• Tested for Compatibility with the Raspberry Pi
• HDMI Male (19 Pin) to HDMI Male (19 Pin)
• 2m Long
• 24k Gold-Plated Contacts Prevents Corrosion for Life-Long Optimum Signal-Transfer
• Fully CEC, Ethernet and 3D over HDMI enabled (V1.4 Connection)
• Supports 4K2K, 2160p, 1440p, 1080p, 720p and 480p Resolutions
• Supports 3D Content, Supports Audio Return Channel, Supports True HD Dolby 7.1 and DTS-HD Master Audio
• 30AWG Wire
• 3 Year Warranty
• Dimensions 22.4 x 15.2 x 2.8 cm
• Weight 141 g

This panel mount HDMI (Male to Female) extension cable will allow you to extend an HDMI connection and secure it to an enclosure!

Perfect for placing your Raspberry Pi in a secure box, the panel mount uses two #4-40 (M3) screws to attach the female socket end! The panel mount screw holes are 26.9mm apart.

This cable is 0.4m long (about 16 inches), and is a V1.4 CEC enabled cable.

This extra long 5m Gold Plated HDMI to HDMI cables are the perfect low cost solution to connecting your Raspberry Pi to your HDMI monitor or TV. This is the latest high speed version V1.4 with Ethernet, 3D and CEC support!

The 5m HDMI to HDMI Cable Features:

• Tested for Compatibility with the Raspberry Pi
• HDMI Male (19 Pin) to HDMI Male (19 Pin)
• 5m Long
• 24k Gold-Plated Contacts Prevents Corrosion for Life-Long Optimum Signal-Transfer
• Fully CEC, Ethernet and 3D over HDMI enabled (V1.4 Connection)
• Supports 4K2K, 2160p, 1440p, 1080p, 720p and 480p Resolutions
• Supports 3D Content, Supports Audio Return Channel, Supports True HD Dolby 7.1 and DTS-HD Master Audio
• 30AWG Wire
• 3 Year Warranty
• Dimensions 22.4 x 15.2 x 2.8 cm
• Weight 206 g

These 2m Gold Plated HDMI to DVI-D cables are the perfect low cost solution to connecting your Raspberry Pi to your DVI monitor or TV. Broadcast quality digital video and inter-component control signals all in one compact, high-performance connection

The 2m HDMI to DVI-D Cable Features:

• Tested for Compatibility with the Raspberry Pi
• HDMI Male (19 Pin) to DVI-D Male (24 + 1 Pin)
• 2m Long
• 24k Gold-Plated Contacts Prevents Corrosion for Life-Long Optimum Signal-Transfer
• 30AWG Wire
• 3 Year Warranty
• Dual Link, High-Speed - 1080p Full HD
• Black PVC Jacket OD 6mm
• Triple Shielding for Maximum RFI Protection and Ultimate Picture Stability
• Supports Uncompressed Video Signals
• Perfect for both High-Definition Video and Standard Video Formats.
• Fully HDCP Compliant to Provide Highest Level of Signal Quality
• RoHS Compliant

These 1.5m Gold Plated HDMI to HDMI noodle cables are completely flat. They're the perfect colourful companion for connecting your Raspberry Pi to your HDMI monitor or TV. This is the latest high speed version V1.4 with Ethernet, 3D and CEC support! 

1.5m Noodle HDMI to HDMI Cable Specification:

• Tested for Compatibility with the Raspberry Pi
• HDMI Male (19 Pin) to HDMI Male (19 Pin)
• 1.5m Long
• Flat "Noodle" Type Cable
• 24k Gold-Plated Contacts Prevents Corrosion for Life-Long Optimum Signal-Transfer
• Fully CEC, Ethernet and 3D over HDMI enabled (V1.4 Connection)
• Supports 4K2K, 2160p, 1440p, 1080p, 720p and 480p Resolutions
• 2 Year Warranty

Pi ZERO USERS PLEASE NOTE: To the best of our knowledge this type of converter draws too much power from the HDMI port to use on the Raspberry pi ZERO. It could end up killing the ZERO.

No issues have been reported on the Pi3 with prolonged use.

This is a HDMI to VGA convert which will allow you to convert your digital HDMI output signal, into an analog signal. Perfect for hooking your Pi up to a computer screen. This convert also comes with a audio jack, with cable, so you can use the audio transfered over HDMI.

Specifications

• HDMI(Type A) to VGA(D-SUB)
• Color: Black
• HDMI Support: 1.3
• Audio Support