CSI camera cables
Description:
The Raspberry Pi Zero comes equipped with a special mini camera port which is smaller than the standard connector for the Raspberry Pi Camera and Noir Camera! So how do you connect to it? With this special camera cable designed specifically for the Raspberry Pi Zero of course! This is an extra long version, with a 150mm total length!
Specifications:
- Length: 150 mm
- Product Dimensions: 150.0mm x 16.0mm x 0.2mm
- Made to fit: Raspberry Pi Zero
- Pins: 15
What's in the box:
1 x Raspberry Pi Zero Camera Cable
- Direct Replacement for the Raspberry Pi Camera Board Cable
- 300mm Overall Length
- 1mm Pitch
- 15 Way Flat Cable
- Conductor: Tin plated copper
- Insulation: White PVC
- Supporting tape: Blue polyester
- UL rating: UL2896
- Temperature rating: 80°C
- Voltage: 30V
- Flame test: VW-1, FT1, FT2
- CSA Standard: CAN/CSA-22.2 No.210.2
What's in the box?
1 x Camera Board Replacement Cable
The Raspberry Pi Camera Module comes fully assembled with a 15-Way 1000mm flat, flex cable that plugs directly in the Raspberry Pi CSI port. Unfortunately the included cable is quite fragile, and can break if twisted or bent too far.
- Direct Replacement for the Raspberry Pi Camera Board Cable
- 1000mm Overall Length
- 1mm Pitch
- 15 Way Flat Cable
- Conductor: Tin plated copper
- Insulation: White PVC
- Supporting tape: Blue polyester
- UL rating: UL2896
- Temperature rating: 80°C
- Voltage: 30V
- Flame test: VW-1, FT1, FT2
- CSA Standard: CAN/CSA-22.2 No.210.2
The Raspberry Pi Camera Module comes fully assembled with a 15-Way 150mm flat, flex cable that plugs directly in the Raspberry Pi CSI port. Unfortunately the included cable is quite fragile, and can break if twisted or bent too far.
- Direct Replacement for the Raspberry Pi Camera Board Cable
- 150mm Overall Length
- 1mm Pitch
- 15 Way Flat Cable
- Conductor: Tin plated copper
- Insulation: White PVC
- Supporting tape: Blue polyester
- UL rating: UL2896
- Temperature rating: 80°C
- Voltage: 30V
- Flame test: VW-1, FT1, FT2
- CSA Standard: CAN/CSA-22.2 No.210.2
The Raspberry Pi Camera Module comes fully assembled with a 15-Way 2000mm flat, flex cable that plugs directly in the Raspberry Pi CSI port. Unfortunately the included cable is quite fragile, and can break if twisted or bent too far.
Don't worry though, not all is lost if that cable does happen to break! Replacement raspberry pi camera board cables are available and it's very easy to swap them over!
- Direct Replacement for the Raspberry Pi Camera Board Cable
- 2000mm Overall Length
- 1mm Pitch
- 15 Way Flat Cable
- Conductor: Tin plated copper
- Insulation: White PVC
- Supporting tape: Blue polyester
- UL rating: UL2896
- Temperature rating: 80°C
- Voltage: 30V
- Flame test: VW-1, FT1, FT2
- CSA Standard: CAN/CSA-22.2 No.210.2
1 x 2000 mm Raspberry Pi Camera cable
This handy little adapter lets you use our tiny Raspberry Pi Zero cameras with full-sized Raspberry Pis. Just slot the cable from your camera into the connector, then connect the larger end of the ribbon cable to your Pi's CSI connector.
Dimensions: 52mm x 16mm x 3mm
What's in the box?
1 x Zero cam adapter cable
Please Note: Pic is for illustration purposes only
Raspberry Pi 5 provides two four-lane MIPI connectors, each of which can support either a camera or a display. These connectors use the same 22-way, 0.5mm-pitch “mini” FPC format and require adapter cables to connect to the 15-way, 1mm-pitch “standard” format connectors on current Raspberry Pi camera and display products.
Raspberry Pi offer mini-to-standard adapter cables for cameras and displays in 200mm, 300mm and 500mm lengths.
Note that a camera cable should not be used with a display, and vice versa.
What's in the box?
1 x Raspberry Pi 5 Camera Adapter Cable
Please Note: Pic is for illustration purposes only
Raspberry Pi 5 provides two four-lane MIPI connectors, each of which can support either a camera or a display. These connectors use the same 22-way, 0.5mm-pitch “mini” FPC format and require adapter cables to connect to the 15-way, 1mm-pitch “standard” format connectors on current Raspberry Pi camera and display products.
Raspberry Pi offer mini-to-standard adapter cables for cameras and displays in 200mm, 300mm and 500mm lengths.
Note that a camera cable should not be used with a display, and vice versa.
What's in the box?
1 x Raspberry Pi 5 Camera Adapter Cable
Please Note: Pic is for illustration purposes only
Raspberry Pi 5 provides two four-lane MIPI connectors, each of which can support either a camera or a display. These connectors use the same 22-way, 0.5mm-pitch “mini” FPC format and require adapter cables to connect to the 15-way, 1mm-pitch “standard” format connectors on current Raspberry Pi camera and display products.
Raspberry Pi offer mini-to-standard adapter cables for cameras and displays in 200mm, 300mm and 500mm lengths.
Note that a camera cable should not be used with a display, and vice versa.
What's in the box?
1 x Raspberry Pi 5 Camera Adapter Cable
The Raspberry Pi Camera Module comes fully assembled with a 15-Way 500mm flat, flex cable that plugs directly in the Raspberry Pi CSI port. Unfortunately the included cable is quite fragile, and can break if twisted or bent too far.
- Direct Replacement for the Raspberry Pi Camera Board Cable
- 500mm Overall Length
- 1mm Pitch
- 15 Way Flat Cable
- Conductor: Tin plated copper
- Insulation: White PVC
- Supporting tape: Blue polyester
- UL rating: UL2896
- Temperature rating: 80°C
- Voltage: 30V
- Flame test: VW-1, FT1, FT2
- CSA Standard: CAN/CSA-22.2 No.210.2
PLEASE NOTE: Pic is for demonstration purposes only
Ribbon Cables are NOT included, this is the adaptor board only!
This neat little adapter board is designed to join two Raspberry Pi Camera board cables together, allowing you to extend the length of the camera cable on Raspberry Pi B/B /2/3 and Pi Zero using multiple cables!
The Raspberry Pi camera module comes with its own 30cm cable to connect to the Pi, but sometimes that's simply not long enough. This lovely little board lets you add extension cables to your existing camera cable, giving you as much range as you'll need!
Features:
- 1mm Pitch
- 15 Way Flat Cable Connector Female to Female
- Designed for Raspberry Pi Camera Cables
Raspberry Pi B/B /2/3 - You will need 2 standard Raspberry Pi Camera Cables One Extender Board.
Raspberry Pi Zero -You will need one Pi Zero Camera Cable Standard Raspberry Pi Camera Cable One Extender Board.
Raspberry Pi 5 provides two four-lane MIPI connectors, each of which can support either a camera or a display. These connectors use the same 22-way, 0.5mm-pitch “mini” FPC format and require adapter cables to connect to the 15-way, 1mm-pitch “standard” format connectors on current Raspberry Pi camera and display products.
Note that a camera cable should not be used with a display, and vice versa.
Black EMI Shielding Film On Both Sides, Enhancing Anti-Interference Performance More Stable Signal Transmission
What's in the box?
1 x Raspberry Pi 5 CSI Camera Adapter Cable
Raspberry Pi 5 provides two four-lane MIPI connectors, each of which can support either a camera or a display. These connectors use the same 22-way, 0.5mm-pitch “mini” FPC format and require adapter cables to connect to the 15-way, 1mm-pitch “standard” format connectors on current Raspberry Pi camera and display products.
Note that a camera cable should not be used with a display, and vice versa.
Black EMI Shielding Film On Both Sides, Enhancing Anti-Interference Performance More Stable Signal Transmission
What's in the box?
1 x Raspberry Pi 5 CSI Camera Adapter Cable
- 1