USB cables/adapters

USB cables/adapters
Sort By:  
The USB to Micro USB Cable is 1.5m long and has been tested for compatibility with the Raspberry Pi
R35.00  Inc VAT
We like this particular dongle for not being too bulky, you can plug it in without blocking the secondary USB port.
R105.00  Inc VAT
This Pi Zero USB Adaptor converts the Zero's Micro USB B Port to a full sized USB A port
R39.00  Inc VAT
Need to send your Raspberry Pi USB signals over a long distance?
R189.00  Inc VAT
The WD PiDrive Cable allows you to easily upgrade your Raspberry Pi by pairing it with HDD storage.
R169.00  Inc VAT
Need to expose USB to the outside of your project/enclosure?
R89.00  Inc VAT
This nifty little USB pig-tail adds audio input and output through USB
R119.00  Inc VAT
USB A male to USB micro B male 1.8m (USB cable micro 1.8m)

    The USB to Micro USB Cable is 1.8m long and has been tested for compatibility with the Raspberry Pi. This cable can be used in conjunction with a USB mains charger or Computer USB port to power your Raspberry Pi.

    Features:

    • Tested for Compatibility with the Raspberry Pi
    • 26AWG (Up to 2A)
    • 1.8m Long
    • Colour: Black
    • Connector Type A: USB 
    • Connector Type B: Micro USB
      The USB to Micro USB Cable is 1.5m long and has been tested for compatibility with the Raspberry Pi
      R35.00  Inc VAT
      USB Sound Adapter for the Raspberry Pi white (2C2 usb audio white)
      The Raspberry Pi has an on-board audio jack, which is super handy for all kinds of sound effects and speech, just plug and go! However, for when you want better audio for music playback, a USB audio card can greatly improve the sound quality and volume. That's because the on-board audio is generated by a PWM output and is minimally filtered. Don't get us wrong, it's a great thing to have audio on board but this USB audio card will make it even better!
       
      We like this particular dongle for not being too bulky, you can plug it in without blocking the secondary USB port. It also works great, takes only a minute to configure and test it on your Pi. 
       
      At this time we have a tutorial for setting it up for audio output, we don't recommend it if you need Mic input. 
       
      This device also works great with Windows machines and should also function for Macs, but we are carrying it specifically for Pi usage.
       
      Features:
      • Greatly improves sound quality and volume
      • Only takes a minute to configure
      • Wire Length: 139.7mm / 5.5"
      • Audio Card Dimensions: 43.76mm / 1.72" x 23.19mm / 0.91" x 11.97mm / 0.47"

      Tutorials:

      USB Audio Cards with a Raspberry Pi**
       

      We like this particular dongle for not being too bulky, you can plug it in without blocking the secondary USB port.
      R105.00  Inc VAT
      USB A Female to Male micro B cable black (2C3 USB F to Micro B M Cable black)
      Description:

      Material: PVC
      High quality
      Compliant with USB2.0 standard and backward compliant with USB1.1 standard
      Support High speed data rate up to 480Mbps
      Portable design and easy to use
      Supports plug & play
      Connectors: USB 2.0 female, Micro-B male

       
      R43.98  Inc VAT
      Pi Zero USB Adaptor White (USB OTG Host Cable) (3B4 Zero USB adapter)

      This Pi Zero USB Adaptor converts the Zero's Micro USB B Port to a full sized USB A port so you can plug in your mouse, keyboard or any other required peripherals! It's an OTG (on-the-go) host cable, which means your Zero can act as a host (master) or client (slave) device! This one's in white!

      Features:

      • Micro USB B (Male) to USB A (Female)
      • OTG On-The-Go Host Cable
      • CE and ROHS Compliant
      • For the Raspberry Pi Zero
      This Pi Zero USB Adaptor converts the Zero's Micro USB B Port to a full sized USB A port
      R39.00  Inc VAT
      USB 2.0 Type A to Micro 5pin B Female Converter Adapter Connector (2C4 USB AF 2 micro BM)
      Features
      Portable and easy to use
      Convert any USB A male connector to a USB Micro B 5Pin Female connector
      Connector Interface: USB 2.0 Type A Female to Type B Micro 5Pin Female adapter

      Package includes:
      1 x USB Converter Adapter
      R49.00  Inc VAT
      Panel Mount - USB A Male to USB A Female (panel mount USB 2C2)

      This handy USB extension cable will make it easy for you to enclose a device that has a A type (USB host) port. It's short (10cm between connectors), so perfect for mounting your Raspberry Pi, Beagle Bone, Arduino etc. into a box!

      The jack half has two mounting 'ears' with M3 screws installed, 8mm apart. The ears are flexible so the holes don't have to drilled very precisely.

      Our Panel Mount USB Cable Features:

      • Specially Manufactured for ModMyPi for use with the Raspberry Pi & Other Microcontrollers 
      • Length between connectors: 10cm
      • Colour: Black
      • 28AWG
      • USB A Male to Panel Mount USB A Female
      • M3 Mounting Ears (Two M3 x 6mm Screws Included)
      R49.99  Inc VAT
      Manhattan Braided Micro-USB Cable 50cm (2A1 braided 50cm micro usb)
      The CABLEPOP1 is Manhattan's Braided Micro-USB Cable. These 1.5 foot cables let you charge and/or sync your smartphone, tablet or other mobile device while showing off your sense of style. The colorful, braided-fabric jacket makes this cable virtually tangle-free and extremely durable. Plus, it has gold-plated USB and Micro-USB contacts for high-speed data transfers up to 480 Mbps.

      Features:
       USB 2.0 Standard-A male to USB 2.0 Micro-B male, 0.5 m / 1.5 ft.
       Braided, tangle-resistant design
       Charge and sync your smartphone, tablet or other mobile devices
       Supports speeds of up to 480 Mbps
       Gold-plated contacts for best performance

      Specifications:
      Cable Length50cm
      ConnectorsMicro USB B male to USB A male
      Cable Color CombinationsTeal/Yellow, Blue/Orange, Purple/Pink, and Black/Green
      R30.00  Inc VAT
      White Nylon Zip Cable Tie Label Strap Strip With Marking Tag 3X100mm(100 pack) (1C2 label cable ties 100)
      Description:
      Material:nylon
      Color:white
      Cable Size:100X3mm(L*W)
      Tag Size:2X1.3cm(L*W)
      Quantity:10pcs

      Features:
      Nylon cable tie label
      Made from high quality nylon 66 material, UL recognized
      Durable,acid-resistance, anti-rust,anti-aging,insulating
      Unique marking tag design, enable you to mark the different cables when connected, easy to recognize.
      Widely used in bundled cables for TV, computer, appliances, lighting, electrical, electronic toys and other products lines

      Package includes:
      10 x Nylon Zip Cable Tie Label
      R75.00  Inc VAT
      USB To RS232 TTL PL2303HX Cable Adapter Module Converter (2C4 USB split to jumper F)
      USB TO RS232 TTL PL2303HX Auto Converter Module Adapter 5V Output, provides the best and convenient way to connect your RS232 TTL devices or DEMO board to your computer via the usb port.

      Specification:

      Built-in TTL COM PC-PL2303HX Chip
      Standard USB type A male and TTL 4 pin connector
      Cable length: 1000mm (39 3/8 in)
      Simple and Easy way to give USB support to your projects
      Black cable-----GND
      Green cable----TXD
      White cable----RXD
      Red cable ---- VCC (5V)

      Package includes:

      1 x USB to RS232/TTL PL2303HX cable adapter module
      R49.00  Inc VAT
      Raspberry Pi USB Power Cable (90 Degree) (2C3 7" display power cable 90 degree)

      This 90 degree USB A to 90 degree Micro USB cable is only 10cm long making it perfect for use with the Official Touch Screen to run power from the screen's controller board (USB) to your Raspberry Pi (Micro USB)! With this cable, you can free your Pi's GPIO for other hacking goodness!

      It's 24AWG, so thick enough to handle the 2.5A current requirement of the Raspberry Pi 3 without dropping the voltage!

      Please note this cable does not fit in the Raspberry Pi 7" Touchscreen Display Case White/black

      Features:

      • 90 Degree USB A Male
      • 90 Degree Micro USB B Male
      • 10cm Length Including Connectors
      • 24AWG Internal Wire for 5V 2.5A

      To use, simply plug the USB end of the cable into the touchscreen driver board, and the micro usb cable into the Raspberry Pi's power port. Then plug your power supply into the touchscreen driver board's micro usb port!

      R39.00  Inc VAT
      Dual micro B USB Power Cable (2C4 usb micro split cable)

      Want to use your new Official Raspberry Pi 7" Touchscreen Display but need to keep your GPIO pins free? This handy little cable is just what you need!

      We love the Raspberry Pi touchscreen but we hate to block up our GPIO! That's why we had these lovely little cables custom made, we figured you might like them too.

      It's just 25cm long and capable of providing 2A combined current across the two male microB USB connectors. Keep your project neat and tidy while providing all the power you need for your Raspberry Pi, touchscreen, and GPIO attached gubbins!

      • 2A of current shared between both connectors
      • 25cm long
      • High quality cable with moulded microB USB connectors
      • Supplies power only (no data lines connected)
      • Use it to run/charge two microB devices at once!

      We recommend using this cable with the Official Raspberry Pi Power Supply.

      Please note: Raspberry Pi and touchscreen display not included!

      R59.00  Inc VAT
      USB Over Ethernet Booster (3C3 usb over ethernet booster)

      Need to send your Raspberry Pi USB signals over a long distance? You need one of these USB over Ethernet Booster sets! This USB booster allows you to connect a USB device to your Pi at a distance of up to 45 meteres via the use of a Cat5e (or greater) RJ45 Ethernet Patch cable.

      The kit consists of two USB to RJ45 extension adaptors, one male one female, and it's bus powered, so requires no external power! Works best on longer distances with the Raspberry Pi Model B+, but fully compatible with the Model A & Model B Raspberry Pi.

      USB Over Ethernet Booster Features:

      • USB Extension Adaptor Pair
      • Extend USB signal up to 45 metres via RJ45 (CABLE NOT INCLUDED)
      • No additional drivers required - Plug n Play
      • Compatible with Windows XP, Win 7, Win 8 & Mac OS X, Linux etc.
      Need to send your Raspberry Pi USB signals over a long distance?
      R189.00  Inc VAT
      WDLabs PiDrive Cable (1A3 WD PiDrive Cable)

      Easily Upgrade Your Raspberry Pi

      The WD PiDrive Cable allows you to easily upgrade your Raspberry Pi by pairing it with HDD storage like a WD PiDrive or any WD 2.5" external USB drive. This custom cable is used to provide an organized power source and supply the appropriate power to the HDD when connected to a Raspberry Pi board. 

      Comes With

      • WD PiDrive Cable

       Compatible With (Not Included)

      • Raspberry Pi
      • WD PiDrive
      • WD PiDrive Power Kit (3A)
      • Any WD PiDrive Enclosures
      The WD PiDrive Cable allows you to easily upgrade your Raspberry Pi by pairing it with HDD storage.
      R169.00  Inc VAT
      Panel Mount Extension Cables (50cm) USB micro-B to A (2C2 Panel mount micro USB)

      Need to expose USB to the outside of your project/enclosure? These lovely little 50cm panel mount extension cables are just the job!

       Great for tidy project builds or quickly hot swapping between devices.

      Each cable is 50cm long and comes with panel mounting points on the socket connections that take M3 machine screws. You can use the supplied screws which are suitable for up to 3mm thick material or choose your own machine screw that matches the aesthetic, length, and head type you prefer!

      Need to expose USB to the outside of your project/enclosure?
      R89.00  Inc VAT
      USB Audio Input/Output Dongle black (2C2 USB sound IN/OUT)

      This nifty little USB pig-tail adds audio input and output through USB. It's a cheap and cheerful solution for audio input to your Raspberry Pi, and the short cable design means it plays nicely with the other USB ports on a Pi.

      After testing a wide range of USB audio dongles, this was the winner through being simple, low on noise and artefacts, and free from pointless buttons, bells, and whistles. The ferrite bead on the cable is a nice little extra.

      Usage

      In Raspbian, this device should show up in the audio control panel automagically (go to the Raspberry Pi menu, then Preferences, then Audio Device Settings, and select USB PnP Sound Device).

      We recommend providing a good signal to the input, as it provides no gain/boost for passive mics.

      Once you're up and running, record audio input on your Pi, in the terminal, by typing:
      arecord -D plughw:1 -f cd /tmp/recording.wav

      This nifty little USB pig-tail adds audio input and output through USB
      R119.00  Inc VAT
      USB A male to USB A Female Extension 2m (USB cable 2m ext)
      • Extend the reach of your USB devices
      • Type A male to Type A female
      • 2m length
      R49.00  Inc VAT
      1.5m USB A to micro B cable with Switch Black (USB Switch cable 1.5m)
      1. With switch ON/OFF, easy to turn on or turn off
      2. USB / Micro USB interface
      3. Perfectly matched to Raspberry PI or Banana Pi
      4. Wire is made of copper with PVC insulation


      Specifications:

      Length: 150cm
      Wire size: 3.4mm in diameter
      Net weight: 40g


      Notes: The product is used to supply power for Raspberry PI and Banana PI, it can not be used for data transmission.

      Package includes:


      1 x Switch power supply cable
      R49.00  Inc VAT
      USB A to USB B cable 2m for Arduino (USB A to USB B(Arduino))

      Specification

      1.USB 2.0 specification
      2.Connector: USB 2.0-A male > USB 2.0-B male
      3.Cable length: 2m
      4.For use with Arduino

      R35.00  Inc VAT
      Per Page      1 - 18 of 18
      • 1