RFID/NFC

Description:

RC522 chip:
MF RC522 is applied to the highly integrated read and write 13.56MHz contactless communication card chip, NXP launched by the company for the "table" application of a low-voltage, low-cost, small size of the non-contact card chip to read and write, smart meters and portable handheld devices developed better choice. The MF RC522 use of advanced modulation and demodulation concept completely integrated in all types of 13.56MHz passive contactless communication methods and protocols. 14443A compatible transponder signals. The digital part of to handle the ISO14443A frames and error detection. In addition, support rapid CRYPTO1 encryption algorithm, terminology validation MIFARE products. MFRC522 support MIFARE series of high-speed non-contact communication, two-way data transmission rate up to 424kbit/s. As new members of the 13.56MHz reader card series of highly integrated chip family, MF RC522 MF RC500 MF RC530 There are a lot of similarities, but also have many of the characteristics and differences. Communication between it and the host SPI mode helps to reduce the connection narrow PCB board volume, reduce costs.

RFID module:
The MF522-AN module uses the the original Philips MFRC522 chip design circuit card reader, easy to use, low cost, and applies to the user equipment development, the reader and the development of advanced applications, the need for the user RF card terminal design/production. This module can be directly loaded into the various reader molds. Utilizes a voltage of 3.3V, through the SPI interface simple few lines directly with any user CPU motherboard connected communication can ensure that the module is stable and reliable work, distance card reader

Specifications:

Electrical parameters:
Operating current :13-26mA/DC 3.3V
Idle current :10-13mA/DC 3.3V
Sleep current: <80uA
Peak current: <30mA
Operating Frequency: 13.56MHz
Supported card types: mifare1 S50, mifare1 S70 MIFARE Ultralight, mifare Pro, MIFARE DESFire
Product physical characteristics: size: 40mm×60mm
Environmental Operating temperature: -20 to +80°C
Environmental Storage Temperature: -40 to +85°C
Relative humidity: relative humidity 5%-95%

Module interfaces SPI Parameter:
Data transfer rate: maximum 10Mbit/s

Package includes:

1 x RFID-RC522 module
1 x Standard S50 blank card (Non-contact IC card)
1 x S50 special-shaped card (key ring shape)
1 x Straight and 1 x angled male to male header(Soldering required)

Our setup guide

Features :

Small and durable
Waterproof, shockproof, anti-corrosive.
Keyring for easy carrying.

Specifications :

Main Chip : Fudan F08 compatible S50
Colour : Blue,Yellow, Black, Green, Red
Size : Approx. 40.5×32×4.2mm
Operating Frequency : 13.56 MHz
Communication speed : 106K Boud
Read and write distance : 2.5 ~ 10cm
Read and write time : 1 ~ 2ms
Operating Temperature : -20 ℃ ~ 85 ℃
Endurance :> 100,000 times
Storage capacity : 8Kbit, 16 partitions, each partition with 2 group passwords

Typical applications :
Enterprise / campus access cards, parking, district management,attendance systems, patrol systems, enterprise systems, access control systems, radio frequency identification field etc.

Package includes :

1 x 13.56MHz RFID Keyfob

This is a radio frequency ID card reader module that can read the ID card's serial numbers. It can help to design intelligent access control systems. When the module sensed ID card, it will convert the card number into a 9-digit hexadecimal number, each digit of which will be converted into ASCII code. Then it adds a starting byte and 5 other bytes, so a total of 15 bytes output to the serial port. You can convert it into a decimal number that is the serial number engraved on the ID card.

Features:
- Support Card Type: Read-only ID cards (such as EM4100, EM4001, etc.)
- Working voltage: 4.5~5.5VDC
- Working current: 40mA (max)
- Working frequency: 125KHz
- Reading distance: 2~5cm
- Logic Interface: UART TTL serial port
- Communication format: 8N1
- Baud rate: 9600
- Induction coil: pluggable
- Coil size: 35X40mm
- Coil lead length: 15cm
- Great for DIY
- Applications: Access control systems, Attendance system

Our setup guide

1. Support: S50/S70 and other ISO14443A card 2. Operating system: Windows 98/XP/2000/CE/7/ME/NT/LINUX 3. Reading distance: 0-8 cm 4. Reading speed: 0.2S 5. Working temperature: -20 C - 85 C 6. Working voltage: 5V 7. Working current: 200mA 8. Work instruction: LED, Beeps

Features :

Small and durable
Waterproof, shockproof, anti-corrosive.
Keyring for easy carrying.

Specifications :

Main Chip : Fudan F08 compatible S50
Colour : Blue,Yellow, Black, Green, Red
Size : Approx. 40.5×32×4.2mm
Operating Frequency : 13.56 MHz
Communication speed : 106K Boud
Read and write distance : 2.5 ~ 10cm
Read and write time : 1 ~ 2ms
Operating Temperature : -20 ℃ ~ 85 ℃
Endurance :> 100,000 times
Storage capacity : 8Kbit, 16 partitions, each partition with 2 group passwords

Typical applications :
Enterprise / campus access cards, parking, district management,attendance systems, patrol systems, enterprise systems, access control systems, radio frequency identification field etc.

Package includes :

 5 x 13.56MHz RFID tags