Laser Cutting/Engraving
Laser Safety Glasses 200-450nm Eye Protection Green Lens. Not suitable for high power laser, only suitable for low power laser. Laser light is harmful to human eyes, please choose these goggles to protect your eyes!
- Brand: Eleksmaker
- Material: Plastic
- Item: Laser Protective Glasses
- Applicable Model: 200-450nm Wavelength
- Optical Density (OD): OD4
- Blue Laser Visible Light Transmission: <50%
- Red Laser Visible Light Transmission: >60%
Features
- Durable and comfortable to wear.
- Fit for 200-450nm blue-violet lasers.
- Ideal for use in most laser applications.
What's in the box?
1 x Laser Safety Glasses
Specifications
- Material:stainless steel and acrylic
- Working Voltage:DC 12V
- Laser Power:3000mW
- Engraving Area:65x50cm(maximum)
- Unit Size:720mm x 630mm
Control software: benbox software support, power can be adjusted, weak light positioning
Engraving Material Note:
- can engrave materials: wood, bamboo, plastic, paper, leather, bank card, rubber
- can not engrave material: metal, stone, ceramic, shell, light-reflecting material, transparent material
Cutting Material Note:
It can only cut foam, paper, thin leather material.
Please Note:


- In the process of using, please ALWAYS wear professional protective glasses to PROTECT YOUR EYES.
- FORBID CHILDREN to use this product.
- Yes, the laser WILL BURN YOUR SKIN! Be very careful while focusing the laser.
- Avoid the use of flammable objects or gasses near the engraver in order to avoid causing a fire or explosion. Never leave the unit unattended while engraving.
- Don't update the firmware.
What's in the box?
1x DIY Desktop Mini Laser Engraving Machine
You might also be interested in....
- A honeycomb bed for your laser engraver

Assembly instructions
https://www.youtube.com/watch?v=7jj5ea1MvEo
1. High Precise Engraving and Cutting
The Laser Falcon take into account both engraving and cutting performance by adopting the poly-lens spot compressed laser technology, achieving both precision up to 0.1 mm. The spot size was compressed to 0.12*0.06 mm from 0.32*0.14 mm. In this case, the engraving accuracy and engraving speed are increased by more than 6 times. The works are finer, with less burr, flanging.
It also has extraordinary cutting ability. It can cut basswood veneer of 4-5 mm, two times thicker than the original 2 mm.

2. Easy to Use - One Button Control
CR-Laser Falcon gets rid of the trouble of many controlling buttons.
The glowing button not only can control the engraving or cutting process, but also can show us the working state of the machine, which enables us to identify the working mode.

3. Quick and Accurate Starting Point Location
Continuous blue light emissions from the laser head will preview the engraving or cutting area. It is convenient for you to determine whether the position is your desired engraving area. If not, you can make an adjustment. For batch engraving, you can use the auxiliary grid plate for the same working area confirmation.

Product Review: https://youtu.be/RRJJSpriDkg
What's in the box?
1 x Creality3D 5W CR-Laser Falcon Engraver
You might also be interested in....
- A honeycomb bed for your laser engraver
Resources
Product Manual

Safety Tips:
- When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear special safety goggles.
- Please do not touch the laser emitter with your hand, it will burn your skin.
- Please avoid a strong impact on the machine.
- Children under 14 are not allowed to use this product and children over 14 need adult supervision.
- The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.
What's in the box?
1 x set of needle files

Energy saving and convenient
The power of lamp base is 0.5W, voltage is 5V, equipped with a portable remote control. The lamp base has 2 power supply methods, which can be powered by 3 AA batteries installed at the bottom of the base, or you can use the included USB cable to power on the lamp base from a USB power bank or USB power supply.
Classic design
The size of this LED display base is measures approx. 8.5cm in length, 3.8cm in height, the base is suitable for most acrylic plates or resin glass (NOT INCLUDED) of the proper size.(0.45cm x 7.2cm slot) Make sure the light stand can hold the acrylic plates stably.
Change the colour at will
Touch the switch on the lamp base or use the equipped portable remote control (Please remove the plastic sheet to use the remote), you can control the change of 16 colours RGB lights and 4 light modes to choose different modes, a stylish decoration and create the atmosphere you need
Base button
Long press to switch on/off
short press to change colours
What's in the box?
1 x lamp base
1 x remote(Please remove the plastic sheet to use the remote)
1 x USB cable
Need batteries? You will find our battery selection here

You can also watch an unboxing video by Aurora Tech at https://www.youtube.com/watch?v=iUdj2oZOWbw&list=WL&index=2&t=696s
Overview
With four powerful 6W laser diodes compressed to increase its laser’s power to 22W, the Falcon2 22W laser engraver is more powerful and faster than ever. This engraver is packed with features, including integrated air assist, a triple monitoring system, and 5 safety and protection systems. From DIY home projects to education, from jewellery customisation to business signage, whatever you can think of, you can make with the Falcon2.
Features
More Powerfull, High Speed Engraving
Based on the latest FAC spot compression technology, four powerful 6W laser diodes are compressed to increase the laser’s power to 22W. With 2x faster engraving speed - 25000mm per minute, Falcon2 allows you to spend less time creating more.
Integrated Air Assist, 3-Step Assembly
You can manually adjust the air assist steplessly through the knob, or automatically adjust the airflow through LightBurn, to remove smoke and protect the laser lens, bringing a cleaner result. Only 3 steps are needed for full assembly. You can enjoy creating as soon as possible.
Tripple Monitoring System
Airflow monitoring indicates the current airflow volume, enabling you to adjust the airflow based on engraving needs. Built-in lens monitoring triggers an alarm when the lens gets dirty, which helps avoid lens breakage and frequent replacement. Flame monitoring – when a flame is detected, the indicator flashes red with an alarm and the machine will stop immediately.
Safety Protections
Bi-directional limit switch: if the laser head reaches the boundary, the machine will stop immediately and a buzzer will sound an alarm. Active stop function: the machine will stop working in the case of an accidental tilt, flip or drop, with the buzzer and indicator sending an alert. Security lock design – for professional use only.
Further Safety Protections
Emergency stop button: if an emergency occurs during operation, you can also stop the machine immediately. Laser protective cover: made from high-efficiency red filter glass material, the protective cover around the laser head effectively protects eyes from laser dazzle.
Exceptional Motion Stability, Sliding Rail
The Falcon2 features outstanding motion stability – the full aluminium alloy design makes for a more solid machine, ensuring exceptional stability even in high-speed operation. Integrated rail and durable wheels: the integrated sliding rail keeps the running highly synchronised, while the U-shaped wear-resistant wheels make motion more stable.
Adjustable Risers, Silicone Foot Pads
There are 3 adjustment holes on the bottom of the machine to suit different table sizes. Adjustable risers: multi-segment equal-length risers to increase height, for engraving skateboards, basketballs and other taller objects; 8 sections are provided. Silicone foot pads: the newly designed foot pads help the machine stand firmly on the table, ensuring 360-degree non-slip operation.
More information available at https://www.creality.com/products/creality-falcon2-22w or download the brochure
What's in the box?
1 x Creality Flacon2 Laser
You might also be interested in....
- A honeycomb bed for your laser engraver
Very handy for your laser cut MDF project assembly
What's in the box?
1 x superglue
Features
- DIY preferred
- Extended assembly time
- Excellent adhesion
- Dries translucent
- Low VOC
- Water cleanup
What's in the box?
1 x 125ml universal wood glue
What's in the box?
1 x roll of masking tape
Abrasive coated semi-flexible sponge, coated on all four surfaces. Suitable for sanding 90° contoured surfaces.
Features
- Washable and reusable dual-grit sponges
- Perfect for Hand Sanding & Finishing
- Easy & Comfortable to Hold When Sanding
- Robust Foam Block
- 100mm x 70mm x 25mm
Typical Applications
- For Use on Wood, Plaster, Metal & Paint
- Cleaning/smoothing your MDF laser cut projects
What's in the box?
1 x sponge sanding block
Abrasive coated semi-flexible sponge, coated on all four surfaces. Suitable for sanding 90° contoured surfaces.
Features
- Washable and reusable dual-grit sponges
- Perfect for Hand Sanding & Finishing
- Easy & Comfortable to Hold When Sanding
- Robust Foam Block
- 100mm x 70mm x 25mm
Typical Applications
- For Use on Wood, Plaster, Metal & Paint
- Cleaning/smoothing your MDF laser cut projects
What's in the box?
1 x sponge sanding block
A perfect project for your Creality Falcon Laser. Get those wishlist projects going!
What's in the box?
10 x keyrings with chains
A perfect project for your Creality Falcon Laser. Get those wishlist projects going!
What's in the box?
5 x keyrings
A perfect project for your Creality Falcon Laser. Get those wishlist projects going!
What's in the box?
10 x keyrings
A perfect project for your Creality Falcon Laser. Get those wishlist projects going!
What's in the box?
10 x keyrings
A perfect project for your Creality Falcon Laser. Get those wishlist projects going!
What's in the box?
6 x keyrings
A perfect project for your Creality Falcon Laser. Get those wishlist projects going!
What's in the box?
10 x keyrings
A perfect project for your Creality Falcon Laser. Get those wishlist projects going!
What's in the box?
12 x quick link keyrings
This sturdy and durable table top has been designed to provide maximum support to your delicate materials during cutting, while ensuring precision cuts every time. Its honeycomb structure allows for optimal air flow, ensuring that smoke and debris are efficiently removed from the area, keeping your workspace clean and safe. Trust our Honeycomb Table Top to deliver the performance and quality you need to take your laser cutting to the next level!
What's in the box?
1 x honeycomb bed
Adjustable Light Beam
It can be used to adjust the light beam according to the engraving and cutting needs, making the work more refined.
25000mm/min Amazing Speed
With 100% improvement in carving efficiency, Falcon2 allows you to spend less time creating more.
Add Some Colors to Your Works,
and Your Life
When the stainless steel is heated by the super powerful laser beam, the metal surface will physically react and produce hundreds of colors, bringing your works to life
Groundbreaking Integrated Air Assist
Manually adjust the air assist steplessly through the knob, or it can automatically adjust the airflow through LightBurn, to remove smoke and protect the laser lens, bringing a cleaner result.
Five Safety Protections
Take the Experience Further
There are 3 adjustment holes on the bottom of the machine to suit different table sizes.
What's in the box?
1 x Creality Falcon2 40W
Resources
More info on the Falcon2 40W