Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
This motor driver board for the micro:bit allows two motors to be driven with forward, reverse, and stop control, and allows access to the other pins.
R279.90  Inc VAT
We bundled a few arcade parts in a kit and slapped some discount on for you.
R463.00  Inc VAT
This pre-built Edge Connector Breakout Board for the micro:bit gives access to all the important pins on the bottom edge of the micro:bit.
R119.90  Inc VAT
230Pcs XH2.54 2P 3P 4P 5 Pin 2.54mm Pitch Terminal Kit / Housing / Pin Header JST Connectors
R72.90  Inc VAT
R99.90  Inc VAT
9Pcs MQ2 MQ-3 MQ-4 MQ-5 MQ-6 MQ-7 MQ-8 MQ-9 MQ-135 Sensor Module kit (gas sensor kit)
Features:

MQ-2:
Detection concentration: 300-1000ppm(combustible gas).

MQ-3:
Used in motor vehicles and other no drunken drivers homework personnel on-site testing, also used in other places of ethanol vapor detection.

Feature:
Size: 32 x 22 x 27mm
Main chip: LM393, ZYMQ - 3 gas sensors
Working voltage: DC 5V
1, With a signal output instructions.
2, Two-way signal output (TTL level output and analog output)
3, TTL output signal for low level effectively.(when the low output electric signal lights at ordinary times, can be directly by single chip microcomputer)
4, Analog 0 - 5V voltage, the higher the concentration, the higher the voltage.
5, To ethanol steam has a high sensitivity and good selectivity.
6, In June and has long service life and reliable stability.
7, Rapid response recovery features.


MQ-4:

1, Using high-quality dual-panel design, with power indicator and TTL signal output instructions;
2, With a DO switch signal (TTL) output and AO analog signal output;
3, TTL output valid signal is low. (When the output low signal light can be directly connected microcontroller or relay module)
4, The analog output voltage, the higher the concentration the higher the voltage.
5, Methane, natural gas has better detection sensitivity.
6, There are four screw holes for easy positioning;
7, Product Dimensions: 32 (L) * 20 (W) * 22 (H)
8, With a long service life and reliable stability
9, Rapid response and recovery characteristics
 
Electrical properties:
Input voltage: DC5V power (current): 150mA
DO output: TTL digital 0 and 1 (0.1 and 5V)
AO output :0.1-0 .3 V (relatively clean), the highest concentration of voltage around 4V

MQ-5:

Suitable for home or industrial on LPG, natural gas, coal gas monitoring devices. Excellent resistance to alcohol, smoke interference.

Module Features:
1, Using high-quality dual-panel design, with power indicator and TTL signal output instructions;
2, With a DO switch signal (TTL) output and AO analog signal output;
3, TTL output valid signal is low. (When the output low signal light can be directly connected microcontroller or relay module)
4, The analog output voltage, the higher the concentration the higher the voltage.
5, For gas, natural gas has better detection sensitivity.
6, There are four screw holes for easy positioning;
7, Product Dimensions: 32* 20 * 22
8, With a long service life and reliable stability
9, Rapid response and recovery characteristics
 
Electrical properties:
Input voltage: DC5V power (current): 150mA
DO output: TTL digital 0 and 1 (0.1 and 5V)
AO output :0.1-0 .3 V (relatively clean), the highest concentration of voltage around 4V

MQ-6:

Suitable for domestic or industrial on LPG (liquefied petroleum gas), butane, propane, LNG (liquefied natural gas) detection devices. Excellent resistance to ethanol vapor, smoke interference.

Module Features:
1, Using high-quality dual-panel design, with power indicator and TTL signal output instructions;
2, With a DO switch signal (TTL) output and AO analog signal output;
3, TTL output valid signal is low. (When the output low signal light can be directly connected microcontroller or relay module)
4, 0 ~ 5V analog output voltage, the higher the concentration the higher the voltage.
5, The propane, butane, LPG, LNG has a good detection sensitivity.
6, There are four screw holes for easy positioning;
7, Product Dimensions: 32 (L) * 20 (W) * 22 (H)
8, With a long service life and reliable stability
9, Rapid response and recovery characteristics
 
Electrical properties:
Input voltage: DC5V power (current): 150mA
DO output: TTL digital 0 and 1 (0.1 and 5V)
AO output :0.1-0 .3 V (relatively clean), the highest concentration of voltage around 4V

MQ-7:

For home, carbon monoxide detection device environment. Suitable for carbon monoxide and gas detection.

Module Features:
Detection of concentration: 10-1000ppmCO
Loop voltage Vc: <=10V DC
Heater voltage Vh: 5.0V ±0.2V  ACorDC(high)
Load resistance: adjustable.
Heater  resistance RH: 31ohm ± 3 ohm(room temperature)
Heater power consumption PH: <=350mW

Standard test conditions:
Temperature: 20 degree ± 2 degree
Humidity: 65% ± 5% RH
Standard test circuit: Vc: 5.0V ± 0.1V; Vh(high):5.0V±0.1V
                                   Vh(low):1.5V±0.1V

1, The analog output voltage, the higher the concentration the higher the voltage.
2, The carbon monoxide detection with better sensitivity.
3, There are four screw holes for easy positioning;
4, Product Dimensions: 32 (L) * 20 (W) * 22 (H)
5, With a long service life and reliable stability
6, Rapid response and recovery characteristics
 
Electrical properties:
Input voltage: DC5V power (current): 150mA
DO output: TTL digital 0 and 1 (0.1 and 5V)
AO output :0.1-0 .3 V (relatively clean), the highest concentration of voltage around 4V

MQ-8:

Suitable for domestic or industrial hydrogen leak on a monitoring device. Are not subject to ethanol vapor, soot, carbon monoxide and other gases interference.

MQ-9:

For home or factory gas leak detection device, suitable for carbon monoxide, combustible gas monitoring device.

Can test carbon monoxide: 10 to 1000ppm CO
Combustible gas range: 100 to 10000ppm

Module Features:
Loop voltage Vc: <=10V DC
Heater voltage Vh: 5.0V ±0.2V  ACorDC
Heater resistance: 31 ohm ± 3 ohm(room temperature).
Heater power consumption PH: <=900mW
Standard test conditions:
Temperature: 20 degree ± 2 degree
Humidity: 65% ± 5% RH
Standard test circuit: Vc: 5.0V ± 0.1V
Vh:5.0V±0.1V
Warm up time: more than 48 hours.

MQ-135:

MQ135 gas sensor is sensitive material used in clean air, low conductivity tin dioxide (SnO2). When the sensor is kept in their environment
The contaminated gas, the conductivity of the sensor with the air pollution gas concentration increases. Using a simple circuit can be changes in the conductivity
Of the concentration of the gas is converted to the corresponding output signal.
MQ135 sensor for ammonia, sulfide, benzene vapor high sensitivity, smoke and other harmful monitor is also very satisfactory. This sensor can detect a
Measuring a variety of harmful gases, is a low-cost sensors for a variety of applications.

Module Applications:
For home, environmental harmful gas detection device, suitable for ammonia, aromatic compounds, sulfur, benzene vapor, smoke and other gases harmful gas detection, gas sensors tested concentration range: 10 to 1000ppm.

Module Features:
Loop voltage Vc: <=24V DC
Heater voltage Vh: 5.0V ±0.2V  ACorDC
Load resistance: Adjustable
Heater resistance: 31 ohm ± 3 ohm(room temperature).
Heater power consumption PH: <=900mW
Sensitive body surface resistance Rs:2K ohm - 20K ohm(in 100ppm NH3)
sensitivity S: Rs(in air)/ Rs(100ppmNH3)>=5
Standard test conditions:
Temperature: 20 degree ± 2 degree
Humidity: 65% ± 5% RH
Standard test circuit: Vc: 5.0V ± 0.1V
Vh:5.0V±0.1V
Warm up time: More than 48 hours.

Package includes:

1 x MQ2
1 x MQ-3
1 x MQ-4
1 x MQ-5
1 x MQ-6
1 x MQ-7
1 x MQ-8
1 x MQ-9
1 x MQ-135
1 x 20pcs 20cm male to female jumper cable
1 x 20pcs 20cm female to female jumper cable

Analog to digital converter not included
Configure and read MQ-x gas sensor
R399.89  Inc VAT
127pcs 7 Sizes Polyolefin Halogen-Free Heat Shrink Tube Sleeving Kit (Black heat shrinkkit)
Description:

Polyolefin heat shrink tubing is a general, flexible heat shrink tubing which can be used for a wide range of applications, including electronics. Standard applications are insulation, mechanical protection and marking.

Electrical tape does not offer the same level of protection as heat shrink tubing against abrasion, corrosive substances or the elements.

Collection of heat shrink tubing,7 Sizes.
Supplied internal diameter: 2.0mm, 2.5mm, 3.5mm, 5.0 mm, 7.0 mm, 10.0mm, 13 mm
Fully shrunk internal diameter: 1.0mm, 1.25mm,1.75mm, 2.5mm, 3.5mm, 5mm, 6.5mm

Specifications:
  • Color: Black
  • Total Length: 7.28m
  • Shrinkage Ratio: 2:1 (will shrink to 1/2 its supplied diameter)
  • Material: Polyolefin
  • Minimum Shrinkage Temp: 70°C
  • Full Shrinkage Temp: 110°C maximum
  • Operating Temperature: -55°C to 125°C
  • Tensile strength: 10.4 Mpa
  • Dielectric strength: 15 kV/mm
  • Manufacture specification: ISO9001
  • Flammability: Flame Retardant
  • Approvals: UL Approved
  • Supplied format (round or flat): Product is supplied flat
  • Cutting method: Scissors or sharp knife
 
Package includes: 
 
1 x Heat Shrink Kit
R169.90  Inc VAT
Kitronik Motor Driver Board v2 for the micro:bit (micro:bit motor driver)

Description:

This motor driver board for the micro:bit allows two motors to be driven with forward, reverse, and stop control, and allows access to the other pins.

This board provides a simple way to add motor driving capability to a micro:bit. It allows two motors to be driven with full forward, reverse & stop control. It has terminal blocks to connect four input devices and a regulated 3V supply is fed in to the 80 way connector to power the inserted micro:bit.

In this new version, the pins from the micro:bit are now broken out to pads on the end of the motor driver board. These pads can either be soldered onto directly, or they are the correct spacing for our PCB pin headers (see image below for a close up of the new pads).

It is ideal for designs such as buggies (see below).

It includes an integrated edge connector slot for your micro:bit to easily slot into. It also features external connections to the buttons A and B inputs. This allows additional switches to be connected to the motor driver board and the state of these can then be read by the micro:bit.

Get up to speed quickly. Example Microsoft TouchDevelop code and example connections in the datasheet (below).

Features:

  • Drive 2 motors with full forward, reverse, and stop control
  • Terminal blocks for easy connection of motors and inputs
  • 4 inputs (2 analogue inputs and 2 provide external connections to buttons A and B as inputs)
  • Includes edge connector for the micro:bit to slot into
  • Provide regulated power to the micro:bit
  • Access the other micro:bit pins easily and conveniently

Contents:

  • 1 x edge connector motor driver board for the micro:bit

Dimensions:

  • Length: 67mm
  • Width: 61mm
  • Height: 18mm
Watch the video: https://youtu.be/muC6vrhNM-s

Resources:



This motor driver board for the micro:bit allows two motors to be driven with forward, reverse, and stop control, and allows access to the other pins.
R279.90  Inc VAT
Blade Type DIY Arcade Kit (Blade arcade kit)
Description:

Perfect for your DIY arcade project.
Replacement blades are available for the joystick and buttons

This kit includes:
1 x blade type 8-way arcade
1 x blade type red button
1 x blade type purple button
1 x blade type green button
1 x blade type yellow button
1 x blade type blue button
1 x blade type orange button
2 x blade type white buttons
1 x zero delay usb encoder board
1 x joystick/buttons connector cable set(You will have to change the lugs)
1 x usb connector cable

We have tested this unit on Raspberry Pi using Retropie and a Windows 7 PC using MAME.

Resources:

Get Retropie on the Raspberry Pi
We bundled a few arcade parts in a kit and slapped some discount on for you.
R463.00  Inc VAT
MAX7219 Dot Matrix MCU LED Display Control Module Kit (MAX7219 soldered matrix display single)

Description:

The MAX7219 are compact, serial input/output common-cathode display drivers that interface microprocessors to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs. Included on-chip are a BCD code-B decoder, multiplex scan circuitry, segment and digit drivers, and an 8x8 static RAM that stores each digit. Only one external resistor is required to set the segment current for all LEDs. 



Specifications:

1 single module can drive an 8 * 8 dot matrix common cathode
Module Operating voltage: 5 v
Module dimensions: length 32 mm X 32 mm wide X 13 mm high
4 mounting holes : diameter of 3 mm
Support for cascading multiple modules

Wiring instructions:

VCC: 5 v
GND: GND
DIN: P2.2
CS: P2.1
CLK: P2.0


Package includes:

1 x LED module
R37.90  Inc VAT
Kitronik Edge Connector Breakout Board for micro:bit (Edge connector micro:bit)
Description:

This pre-built Edge Connector Breakout Board for the micro:bit gives access to all the important pins on the bottom edge of the micro:bit.

Looking to do more with your micro:bit? Unlock its potential with this pre-built version of our Edge Connector Breakout Board! This breakout board has been designed to offer an easy way to connect additional circuits and hardware to the pins on the edge of the micro:bit. It provides access to all of the micro:bit processor pins allowing a lot of extra functionality to be added. The datasheet (below) includes a helpful diagram explaining the function of every pin on the micro:bit.

This Edge Connector Breakout Board for the micro:bit gives access to all of the important pins on the bottom edge of the micro:bit. 21 pins are broken out in total; providing additional I/O lines, direct access to buttons A and B, the LED matrix outputs and the I2C bus. Please refer to the datasheet below for more details.

The micro:bit pins are broken out to a row of pin headers. These provide an easy way of connecting circuits using jumper wires. The SCL and SDA pins are separated at the edge of the board (solder pads) providing easy identification. The PCB includes a prototyping area with 3V, 0V and unconnected rows that can be soldered to. This allows the easy connection of switches, sensors and any pull-up or pull-down resistors etc. as required.

To use the breakout board the micro:bit should be inserted firmly into the connector as shown below:

Note:

  • This product is supplied with straight double row PCB pin headers already soldered to the breakout board

Features:

  • Features a dedicated pin strip for quick and easy prototyping
  • Breaks out 21 pins from the edge of the micro:bit
  • Dedicated prototyping area with 3V and 0V rows
  • Labelled pins and clear, straightforward documentation

Contents:

  • 1 x Edge Connector Breakout Board for the micro:bit, pre-built

Dimensions:

  • Length: 60mm
  • Width: 40mm
  • Height: 11.8mm

Video available at https://youtu.be/bzm4zepbGAc

Requires:

Resources:

This pre-built Edge Connector Breakout Board for the micro:bit gives access to all the important pins on the bottom edge of the micro:bit.
R119.90  Inc VAT
Power Over Ethernet Passive POE Injector Splitter Kit (POE kit - Passive)
Description:

Contains: INJECTOR and SPLITTER.

Complete set for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices such as D-Link, Ovislink, Senao, Wline, Router BOARD, WRAP boards and other devices using passive POE injection.

Connector Barrel size is 2.1mm (5.5 x 2.1 mm)
Power Pins 4,5 and 7,8 -

1. It is very simple to connect a passive PoE.
On the lower part, we connect the Ethernet RJ connector of passive PoE to the PC, Hub or Switch and connect the power adapter to the power socket.
2. On the opposite end (RJ socket) we connect the Ethernet cable leading to the far end.
3. At the far end, we connect the end of the Ethernet cable to the RJ45 socket and connect the power connectors and the Ethernet to the powered equipment.

The equipment is now connected by them.

Input / Output Specifications:

Supports Voltage: 5V, 12V, 24V, 48V
Max Output Current 0.4A Max.
Over Current Protection None


General Specifications:

 Operating Temperature 0° ~ 45°
Storage Temperature -30oC ~ 70oC
CASE OF MATERIAL PVC
Ethernet Date Rate 10/100Mbps
Ethernet Cable TIA/EIA 568 Cat.5
Humidity Up to 90%
Weight: 24g*4DC
Plugs 2.1mm x 5.5mm x 12mm
Length 155mm

Package Included:
 
1 x RJ45-DC set Splitter
R59.90  Inc VAT
Educational My First DIY Circuit Kit (My first circuit kit)
Description:

LEARN ABOUT ELECTRICITY – Provide a fun learning experience for inquisitive minds

Specifications:


Color: Green
Material: Plastic
Battery: 2 X AA Battery (Not included)
Switch Size: (L)X(W) 71mm X 32mm(appr.)
Battery Holder Size: (L)X(W) 80mm X20mm(appr.)
Bulb Holder Size: (L)X(W) 71mm X32mm/(appr.)
 
Features:</div
1. Assisting teachers and parents in better physics teaching
2. Enrich children's leisure life, cultivate hands-on ability, and consolidate knowledge
3. Let kindergarten children and elementary school students learn physical knowledge by forming a simple circuit, series circuit, parallel circuit
 
Package includes:
4 X Bulbs
1 X Switch
2 X Bulb Holders
6 X Conductive Lines
2 X Battery Holders (Battery Not Included)
R159.90  Inc VAT
HX711 24bit AD Module 1kg Aluminum Alloy Scale Weighing Sensor Load Cell Kit (1kg scale load cell)
Description:

HX711 is an electronic scale module, whose working principle is to convert the measured changes in resistance value changes, through the conversion circuit into electrical output.


Features:

Size: 33mm x20mm / 1.29 " x0.78 "
Range:1kg
Operating temperature:-20℃~ >85℃
Ambient Humidity:10%-80RH
Voltage range: 2.6~5.5V
Weight: 32g

Package includes:

1 x Weighing Sensor
1 x HX711 Module

Resources:
Building a Raspberry Pi weight scale
Python Library
Building an Arduino weight scale
R89.90  Inc VAT
No EEPROM – Adafruit Perma-Proto HAT for Pi Mini Kit (Ada perma proto hat)
Adafruit Perma-Proto HAT for Pi Mini Kit

Description:

Design your own Pi HAT, attach custom circuitry and otherwise dress your Pi 3, 2, A or B with this jaunty prototyping HAT kit.

  • It has a grid of 0.1" prototyping soldering holes for attaching chips, resistors, LED, potentiometers and more.
  • The holes are connected underneath with traces to mimic the solderless breadboards you're familiar with.
  • There are also long power strips for 3V, 5V and Ground connections to the Pi.
  • Near the top we break out nearly every pin you could want to connect to the Pi (#26 didn't quite make the cut).

This is just the basic version of our Perma-Proto HAT.  It comes with a printed circuit board and a single 2x20 GPIO Header for Raspberry Pi to put your Perma-Proto on top of your Raspberry Pi (like a nice little hat...)


Example uses:
Weather station
reef-pi

R78.41  Inc VAT
R105.90
WS AlphaBot2 robot building kit for BBC micro:bit V2 (no micro:bit included) (Alphabot 2 micro:bit)
Please note: Micro:bit is not included

Description:

This AlphaBot2 robot kit is designed to use with the BBC micro:bit (not included). It features rich common robot functions including line tracking, obstacle avoiding, ultrasonic ranging, Bluetooth/2.4G remote control, etc.

Thanks to the highly integrated modular design, it is fairly easy to assemble by a snap, no soldering, no wiring. After a few minutes spent on hardware assembling, you're almost there, our open source demo codes is ready to help you get started fast.

AlphaBot2 Features

AlphaBot2 employs a 2-layer structure to provide excellent stability and compatibility.

AlphaBot2-Base, the lower base chassis:

  • 5-ch infrared sensor, analog output, combined with PID algorithm, stable line tracking
  • Onboard modules like line tracking, obstacle avoiding, needs no messy wiring
  • TB6612FNG dual H-bridge motor driver, compared with L298P, it's more efficient, more compact, and less heating
  • N20 micro gear motor, with metal gears, low noise, high accuracy
  • Onboard RGB LEDs, true color lighting, pretty cool

AlphaBot2 for micro:bit, the upper adapter board for controller:

  • micro:bit dedicated connector, for easily connecting with the micro:bit
  • MP1584 voltage regulator, provides stable 5V output
  • RT9193-33 voltage regulator, provides stable 3.3V voltage to the micro:bit
  • TLC1543 AD acquisition chip, allows the micro:bit to use analog sensors
  • PCA9685 PWM control chip, I/O expander
  • Onboard buzzer to play music

What's on the AlphaBot2-Base


  1. AlphaBot2 control interface: for connecting sorts of controller adapter board
  2. Ultrasonic module interface
  3. Obstacle avoiding indicators
  4. Omni-direction wheel
  5. ST188: reflective infrared photoelectric sensor, for obstacle avoiding
  6. ITR20001/T: reflective infrared photoelectric sensor, for line tracking
  7. Potentiometer for adjusting obstacle avoiding range
  8. TB6612FNG dual H-bridge motor driver
  9. LM393 voltage comparator
  10. N20 micro gear motor reduction rate 1:30, 6V/600RPM
  11. Rubber wheels diameter 42mm, width 19mm
  12. Power switch
  13. Battery holder: supports 14500 batteries
  14. WS2812B: true color RGB LEDs
  15. Power indicator
What's on the AlphaBot2 for micro:bit (Adapter Board)


  1. micro:bit connector
  2. AlphaBot2-Base header: for connecting with the base board
  3. RT9193-33: 3.3V voltage regulator, stable power supply for the micro:bit
  4. PCA9685: PWM control chip, I/O expander, I2C interface
  5. TLC1543: 10-bit AD acquisition chip, allows the micro:bit to use analog line tracking sensor
  6. Buzzer
  7. MP1584 5V voltage regulator
Dimensions
Development Resources

Wiki : www.waveshare.com/wiki/AlphaBot2_for_micro:bit

This Kit Includes:

Note: this product requires two 14500 batteries to work, which are NOT included and should be purchased separately.

Note: the controller micro:bit is NOT included.

AlphaBot2 for micro:bit Acce Pack
  1. AlphaBot2 for micro:bit (adapter board) x1
  2. AlphaBot2-Base (base chassis) x1
  3. Ultrasonic sensor x1
  4. FC-20P cable 8cm x1
  5. USB type A plug to micro B plug cable x1
  6. AlphaBot2 for micro:bit screws x1
  7. Screwdriver x1
R1,299.90  Inc VAT
Upgrade Remote Metal Extruder Kit For Creality 3D Printer - right (extruder upgrade red right)
Features:

  • Upgrade your Creality 3D Printer Extruder with our New "Metal Aluminium Anodised" Upgrade Kit.
  • Our kit includes all the necessary screws & parts needed to directly replace your original creality plastic extruder.
  • All you have to do is unbolt the old original creality plastic extruder & screw in the new "Metal Extruder" and you are ready to start printing.
  • The advantages of a metal extruder is that you have better, stronger pressure pushing the filament into the printer nozzle so it will improve on the printer's performance.
  • Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed.

Package Includes:

1 x Extruder Upgrade Kit
R194.90  Inc VAT
230Pcs XH2.54 2P 3P 4P 5 Pin 2.54mm Pitch Terminal Kit / Housing / Pin Header JST Connectors (JST header kit)
Description:

JST connectors are electrical connectors manufactured to the design standards originally developed by J.S.T. Mfg. Co. (Japan Solderless Terminal). JST manufactures numerous series (families) and pitches (pin-to-pin distance) of connectors.

JST XH connectors were developed based on the high reliability and versatility of the NH series connectors




Package Includes:

2pin = 10Sets =20PCS   
3pin = 10Sets =20PCS   
4pin = 10Sets =20PCS   
5pin = 10Sets =20PCS   
Pin Connector Terminal :150PCS

230Pcs XH2.54 2P 3P 4P 5 Pin 2.54mm Pitch Terminal Kit / Housing / Pin Header JST Connectors
R72.90  Inc VAT
Avoidance tracking Smart Robot Car Chassis Kit Speed Encoder Battery Box 2WD Ultrasonic module For Arduino kit (Aduino robot car)
Please Note: Some drilling will be required. You might need to add a few standoffs and screws to build it the way you want it.
Description:

This complete robot car kit includes the arduino as well. Just add batteries and code. Great for beginners to learn how to code using sensors and motion on the Arduino boards

Pdf manual available at http://www.cs.columbia.edu/~sedwards/presentations/robot-car-instructions.pdf 
Get more details at https://create.arduino.cc/projecthub/hda-robotics/project-1-2wd-obstacle-avoiding-robot-390ef8

Package Includes: 
  • Car chassis x 1 
  • Car Wheels x 2 
  • DC Gear Motor x 2 
  • 20 line gun code disk x 2 
  • Fasteners (high intensity black acrylic) x 4 
  • Caster x 1 
  • Four battery box x 1 
  • Quality Rocker Switch x 1 
  • Assembly drawing x 1
  • Several screws and nuts
  • V5 shield x 1
  • UNO R3 x 1
  • SG90 x 1
  • FPV x 1
  • L298N x 1
R599.90  Inc VAT
12V Silver/Red V6 1.75mm J-Head Hotend Remote Extruder Kit with Heating Tube for CR10/CR8 3D Printer (12V red hotend)
Description:

Replace your 12V Creality CR* printer hotend with ease. 


Specifications:


- Color: Silver/Red
- Nozzle size:1.75mm
- Nozzle material: Brass
- Heating Block size: 19mm x 19mm x 10mm
- Heating Block/Heatsink Material: Aluminum Alloy
- Working Temperature: 260°C
- Heating Tube: 12v 40W
- Suitable: CR8/CR10 3D printer
- White wire is temperature thermistor, red wire is heating tube.
 
Package includes:
 
1 x Aluminum block(red and silver)
1 x Heating tube




R219.90  Inc VAT
ws 2-DOF Pan-Tilt HAT kit for Raspberry Pi (WS pan/tilt kit)
Overview

This is a 2-DOF pan-tilt kit designed for Raspberry Pi. With onboard PCA9685 PWM chip and TSL2581 ambient light sensor, it allows the Pi to control camera movement and sense light intensity through I2C interface.

Features
  • Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B
  • I2C interface, only 2 pins are required for moving and light intensity sensing
  • Onboard PCA9685 chip, provides 12-bit resolution PWM signal for moving control
  • Onboard TSL2581FN light-to-digital converter, with embedded ADC, provides a value that approximates the human eye response to assist the module
  • Onboard voltage level translator, compatible with 3.3V/5V operating voltage
  • Specific acrylic board to fix the Raspberry Pi camera, make it easy to install
  • Comes with development resources and manual (demo code, assembly guide)
Specifications
  • PWM driver: PCA9685
  • PWM resolution: 12-bit
  • Ambient light sensor: TSL2581FN
  • Ambient light resolution: 16-bit
  • Communication interface: I2C
  • Operating voltage: 3.3V/5V
  • Dimension: 56.6mm x 65mm
How to Assemble

A little assembly work is required to use the Pan-Tilt HAT, yet it's pretty easy to do, here's the assembly guide: https://www.waveshare.com/img/devkit/accBoard/Pan-Tilt-HAT/Pan-Tilt-HAT-assemble.jpg

Dimensions



Development Resources

Wiki : www.waveshare.com/wiki/Pan-Tilt_HAT

R329.90  Inc VAT
2 Pcs LilyPad Button Connect Sensor Board Module for Arduino Power DIY KIT Momentary Push Button Electronic PCB Board Module (wearable buttons(2))
Description:

We designed this board to give the user a very discrete button without any edges. Button closes when you push it and opens when you release (momentary push button).
Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Package:

2 x LilyPad Button Board module for ArduinoWe designed this board to give the user a very discrete button without any edges. Button closes when you push it and opens when you release (momentary push button).
Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!
 
Dimensions:

8mm x 16mm
Thin 0.8mm PCB
 
Package Includes:

2 x LilyPad Button Board module for Arduino

Getting started with Lilypad button sensor board
R11.90  Inc VAT
Rear Bike Light Project Kit (KT bike kit)
Product Description

This easy build bike light kit has just ten parts, making it a good introduction to electronics. The kit uses two ultra bright red LEDs, which flash rapidly, providing a highly visible light. Making it ideal for use as a rear bike light.

Alternatively it can be used as a night safety product or flashing eyes.

Features:

  • Easy build kit making a great introduction to electronics.
  • Great visibility for night time safety.

Contents:

  • 1 x 2xAA Battery Cage with Leads.
  • 2 x 470K Resistor.
  • 1 x 33R Resistor.
  • 2 x Capacitor, Electrolytic, 16V, 10uF.
  • 2 x BC547 NPN Transistor.
  • 2 x Red 5mm Water Clear LED - 30deg - 1000mCd.

Dimensions:

  • Length: 48.5mm.
  • Width: 25.5mm.

Requires:


Resources:


This easy build bike light kit has just ten parts, making it a good introduction to electronics. The kit uses two ultra bright red LEDs, which flash rapidly, providing a highly visible light. Making it ideal for use as a rear bike light.

Alternatively it can be used as a night safety product or flashing eyes.

Caution:

  • This is an educational kit and should be used in conjunction with a commercially available bike light.
R59.90  Inc VAT
Easy Build Timer Project Kit (KT timer kit)
Product Description

With its low part count this easy build timer project makes a good introduction to electronics. The timer uses a resistor capacitor network to provide a time delay of between 1 second and 4 minutes, which is set by the PCB mount variable resistor. When the button is pressed the LED changes from red to green, then at the end of the time interval it turns red.

Features:

  • Easy build timer kit.
  • When the time set has been reached the LED changes colour.
  • The time delay can be adjusted via the variable resistor.

Contents:

  • 1 x 2AA Battery Cage.
  • 1 x 47Ω Resistor.
  • 2 x 10KΩ Resistors.
  • 1 x 1MΩ Potentiometer.
  • 1 x Capacitor, Electrolytic, 10V, 1 mF.
  • 1 x BC558 PNP Transistor.
  • 1 x Tri colour 5mm diffused LED - 650mCd.
  • 1 x 6mm PCB Mount Tactile Switch 9.5mm Height.
  • 1 x Easy Build Timer PCB

Dimensions:

  • PCB Length: 54mm.
  • PCB Width: 26mm.

Requires:


Resources:

Note:

  • This kit requires soldering.
R69.90  Inc VAT
Air Freshener Kit (KT fan kit)
Product Description

This kit uses a silent low current motor to spin a fan, making it perfect to circulate air through an air freshener containing potpourri or it can be used to move a light weight buggy. The electronics take no power in standby and when the switch is pressed the motor spins for up to 100 seconds. This time is adjustable via the on board variable resistor.

Features:

  • Silent motor.
  • Adjustable timer.

Contents:

  • 1 x Battery Holder With Leads (2x AA).
  • 1 x 1K Resistor 5%.
  • 1 x 1M resistor.
  • 1 x PCB Trimmer 1M POT.
  • 1 x 16V 220uF Electrolytic Capacitor.
  • 2 x BC547 NPN Transistor.
  • 1 x Miniature Push to Make Switch, Red.
  • 1 x Low Inertia Solar Motor - 1820 RPM.
  • 1 x 55mm White Four Blade Miniature Impeller.
  • 0.5m Connecting Wire.
  • 1 x Air Freshener PCB.

Dimensions:

  • Length: 46mm.
  • Width: 28mm.

Requires:

Resources:

This kit is supplied in a grip seal bag.


R99.90  Inc VAT
Per Page      41 - 60 of 168