All Products

Sort By:  
R804.60  Inc VAT
R899.90
Would you like to learn electronics, with an all-in-one board that has sensors and LEDs built in? Circuit Playground is here, and it's the best way to practice programming on real hardware. No soldering or sewing required!
R529.90  Inc VAT
R189.90  Inc VAT
A low cost, high-performance microcontroller board built around Raspberry Pi's very own chip - the RP2040.
R69.90  Inc VAT
R329.90  Inc VAT
UNO R3 SMD (CH340G) MEGA328P for Arduino UNO R3 USB CABLE ATMEGA328P-AU Development board (UNO SMD fixed IC)
Product introduction

UNO R3 is a microcontroller board based on the ATmega328P.

The Arduino Uno R3 comes in two models; the normal version and the SMD version. In the SMD version you have the Atmega328 controller IC as an SMD chip soldered into the board, whereas in the normal version the IC is held on the Arduino by an IC Holder.  

It has:
- 14 digital input/output pins (of which 6 can be used as PWM outputs)
- 6 analog inputs
- a 16 MHz quartz crystal
- a USB connection
- a power jack
- an ICSP header
- a reset button.

It contains everything needed to support the microcontroller. Simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.


Package Includes:

1 x Arduino Uno SMD
1 x Headers
1 x USB cable

Resources:

Getting started with Arduino products
R269.90  Inc VAT
Dexter - BalanceBot Extension Kit (dexter balance kit)
Description:

Build a BalanceBot with the Raspberry Pi! 

The BalanceBot extension kit takes your GoPiGo3 and turns it into an upright balancing robot! Kit includes an IMU sensor, IR receiver, IR remote control and a set of 3 sensor mounts. Program examples provided in Raspbian for Robots in Python.

Please Note. The GoPiGo3, Raspberry Pi and other associated hardware are NOT included in this purchase.


What’s included:

  • BalanceBot Power Cable (longer than the original one that comes with the GoPiGo3 base kit)
  • IMU Sensor
  • Infrared Reciever Sensor
  • Infrared Remote Control
  • Sensor Mounts (s/3)

What else do I need:

NOTE: This expansion kit will not work with the GoPiGo2.

R804.60  Inc VAT
R899.90
UNO R3 MEGA328P ATMEGA16U2 for Arduino Compatible (Uno Board DIP IC)
Description:


Arduino is an open-source electronics platform based on easy-to-use hardware and software. Arduino boards are able to read inputs - light on a sensor, a finger on a button, or a Twitter message - and turn it into an output - activating a motor, turning on an LED, publishing something online.

Find more info on Arduino at https://www.arduino.cc/en/guide/introduction

Specifications:

 Microcontroller ATmega328
Operating Voltage 5V
Input Voltage (recommended) 7-12V
Input Voltage (limits) 6-20V
Digital I/O Pins 14 (of which 6 provide PWM output)
Analog Input Pins 6
DC Current per I/O Pin 40 mA
DC Current for 3.3V Pin 50 mA
Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader
SRAM 2 KB (ATmega328)
EEPROM 1 KB (ATmega328)
Clock Speed 16 MHz
Length 68.6 mm
Width 53.4 mm

Package includes:

1 x UNO R3
1 x USB cable


R199.90  Inc VAT
R239.90
Raspberry Pi4 Official USB-C 15.3W power supply Black 5.1V 3A (Pi4 3A power black)

Description:

You will find a South African plug adapter here

The official Raspberry Pi USB-C power supply is designed to power the latest Raspberry Pi 4 Model B computers, which were released in June 2019.
Featuring a captive USB-C cable, the power supply is available in four different models to suit different international power sockets, and in two colours, white and black.

If you need to use the power supply for an earlier model RPi or the zero you'll need a type C to micro B adapter than you will find at https://www.pishop.co.za/store/rpi-power/black-usb-type-c-female-to-micro-usb-male-adapter

Specifications

Output
  • Output voltage: 5.1V DC
  • Minimum load current: 0A
  • Nominal load current: 3.0A
  • Maximum power: 15.3W
  • Load regulation: ±5%
  • Line regulation: ±2%
  • Ripple & noise: 120mVp-p
  • Rise time: 100ms maximum to regulation limits for DC outputs
  • Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
  • Protection: Short circuit protection, Overcurrent protection, Over temperature protection
  • Efficiency: 81% minimum (output current from 100%,75%, 50%, 25%)72% minimum at 10% load
  • Output cable: 1.5m 18AWG
  • Output connector: USB Type-C


Input
  • Voltage range: 100-240Vac (rated)
  • 96-264Vac (operating)
  • Frequency: 50/60Hz ±3Hz
  • Current: 0.5A maximum
  • Power consumption (no load): 0.075W maximum
  • Inrush current: No damage shall occur and the input fuse shall not blow
Case material
UL94V-1

AC pin material
Brass (NI plated)

WARNINGS
• This product should be operated in a well-ventilated environment.
• The connection of incompatible devices to this power supply may affect compliance, result in damage to the unit and invalidate the warranty.

What's in the box:

1 x USB-C 15.3W power supply

SAFETY INSTRUCTIONS
To avoid malfunction or damage to this product please observe the following:
• Do not expose to water or moisture, or place on a conductive surface whilst in operation.
• Do not expose to heat from any source; this is designed for reliable operation at normal ambient room temperatures.
• Do not attempt to open or remove the power supply case.
R169.90  Inc VAT
Raspberry Pi4 Official USB-C 15.3W power supply White 5.1V 3A (Pi4 3A power white)

Description:

You will find a South African plug adapter here

The official Raspberry Pi USB-C power supply is designed to power the latest Raspberry Pi 4 Model B computers, which were released in June 2019.
Featuring a captive USB-C cable, the power supply is available in four different models to suit different international power sockets, and in two colours, white and black.

If you need to use the power supply for an earlier model RPi or the zero you'll need a type C to micro B adapter than you will find at https://www.pishop.co.za/store/rpi-power/usb-type-c-female-to-micro-usb-male-adapter

Specifications

Output
  • Output voltage: 5.1V DC
  • Minimum load current: 0A
  • Nominal load current: 3.0A
  • Maximum power: 15.3W
  • Load regulation: ±5%
  • Line regulation: ±2%
  • Ripple & noise: 120mVp-p
  • Rise time: 100ms maximum to regulation limits for DC outputs
  • Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
  • Protection: Short circuit protection, Overcurrent protection, Over temperature protection
  • Efficiency: 81% minimum (output current from 100%,75%, 50%, 25%)72% minimum at 10% load
  • Output cable: 1.5m 18AWG
  • Output connector: USB Type-C


Input
  • Voltage range: 100-240Vac (rated)
  • 96-264Vac (operating)
  • Frequency: 50/60Hz ±3Hz
  • Current: 0.5A maximum
  • Power consumption (no load): 0.075W maximum
  • Inrush current: No damage shall occur and the input fuse shall not blow
Case material
UL94V-1

AC pin material
Brass (NI plated)

What's in the box:

1 x USB-C 15.3W power supply

WARNINGS
• This product should be operated in a well-ventilated environment.
• The connection of incompatible devices to this power supply may affect compliance, result in damage to the unit and invalidate the warranty.

SAFETY INSTRUCTIONS
To avoid malfunction or damage to this product please observe the following:
• Do not expose to water or moisture, or place on a conductive surface whilst in operation.
• Do not expose to heat from any source; this is designed for reliable operation at normal ambient room temperatures.
• Do not attempt to open or remove the power supply case.
R169.90  Inc VAT
Panasonic A1 32GB uSD card preloaded with Raspberry Pi OS (PAN RPi OS A1 uSD 32GB)

16GB, 32GB or 64GB Panasonic Class 10 A1 Micro SD card preinstalled with the Raspberry Pi OS. Perfect for the Raspberry Pi 4 Model B, Raspberry Pi 3 or Raspberry Pi Zero.

Features:

  • This is the hard drive and operating system for your Raspberry Pi
  • Extended partition to make full use of the SD card
  • Ready to use – plug it in and you’re ready to go
  • Only the most current stable release of the operating system will be used
  • High quality MicroSD card
What's in the box:

1 x 32GB uSD card 

Resources:

Latest image and tools available from the Raspberry Pi Foundation Downloads
R139.90  Inc VAT
Adafruit Circuit Playground Express (Circuit playground express)

Description:

Circuit Playground Express
 is the next step towards a perfect introduction to electronics and programming. We've taken the original Circuit Playground Classic and made it even better! Not only did we pack even more sensors in, we also made it even easier to program.

Start your journey with Microsoft MakeCode block-based or Javascript programming. Or, you can follow along with code.org CS Discoveries. Then, you can use the same board to try CircuitPython, with the Python interpreter running right on the Express. As you progress, you can advance to using Arduino IDE, which has full support of all the hardware down to the low level, so you can make powerful projects.

Because you can program the same board in 3 different ways - the Express has great value and re-usability. From beginners to experts, Circuit Playground Express has something for everyone.

Here's some of the great goodies baked in to each Circuit Playground Express:

  • 10 x mini NeoPixels, each one can display any color
  • 1 x Motion sensor (LIS3DH triple-axis accelerometer with tap detection, free-fall detection)
  • 1 x Temperature sensor (thermistor)
  • 1 x Light sensor (phototransistor). Can also act as a color sensor and pulse sensor.
  • 1 x Sound sensor (MEMS microphone)
  • 1 x Mini speaker with class D amplifier (7.5mm magnetic speaker/buzzer)
  • 2 x Push buttons, labeled A and B
  • 1 x Slide switch
  • Infrared receiver and transmitter - can receive and transmit any remote control codes, as well as send messages between Circuit Playground Expresses. Can also act as a proximity sensor.
  • 8 x alligator-clip friendly input/output pins
  • Includes I2C, UART, 8 pins that can do analog inputs, multiple PWM output
  • 7 pads can act as capacitive touch inputs and the 1 remaining is a true analog output
  • Green "ON" LED so you know its powered
  • Red "#13" LED for basic blinking
  • Reset button
  • ATSAMD21 ARM Cortex M0 Processor, running at 3.3V and 48MHz
  • 2 MB of SPI Flash storage, used primarily with CircuitPython to store code and libraries.
  • MicroUSB port for programming and debugging
  • USB port can act like serial port, keyboard, mouse, joystick or MIDI!

More product details available at https://learn.adafruit.com/adafruit-circuit-playground-express

Circuit Playground Lessons available at https://learn.adafruit.com/circuit-playground-lesson-number-0/intro
Would you like to learn electronics, with an all-in-one board that has sensors and LEDs built in? Circuit Playground is here, and it's the best way to practice programming on real hardware. No soldering or sewing required!
R529.90  Inc VAT
Sandisk 16GB uSD preloaded with Raspberry Pi OS card in jewel case with SD Adapter (SAN RPi OS Jewel 16GB uSD)
Description

16GB Sandisk Micro SD card preinstalled with the Raspberry Pi OS. Perfect for both the Raspberry Pi 4 Model B, Raspberry Pi 3 or Raspberry Pi Zero.
  • This is the hard drive and operating system for your Raspberry Pi
  • Extended partition to make full use of the SD card
  • Ready to use – plug it in and you’re ready to go
  • Only the most current stable release of the operating system will be used
  • High quality MicroSD card
What's in the box:

1 x  Sandisk 16GB uSD preloaded with Raspberry Pi OS
1 x  Jewel case
1 x  SD Adapter

Resources: 

Latest image and tools are available from the Raspberry Pi Foundation Downloads
R129.90  Inc VAT
Raspberry Pi Pico Maker kit 2 power supply 5V 2A (Pico maker kit 2 white)

Description:

This Starter Kit is based around the Raspberry Pi Pico development board which features the Raspberry Pi RP2040 microcontroller chip.

Whats in the box:


Resources:

Add wifi to Pico using Cricket
https://www.thingsonedge.com/post/pico-cricket-blynk-phone-alerts


R253.90  Inc VAT
R277.60
Raspberry Pi Build HAT for LEGO (RPi build hat)
Read more in HackSpace magazine issue 49 at https://hackspace.raspberrypi.com/issues/49

Description:


The Raspberry Pi Build HAT combines the power of Raspberry Pi computing with LEGO® hands-on learning to enable a fun and creative learning experience for students, teachers and makers.

The Build HAT is compatible with the most recent generation of LEGO® Technic™ motors, and with sensors included in the LEGO® Education SPIKE™ Prime portfolio.

The Build HAT is the second Raspberry Pi product, after Raspberry Pi Pico, to be powered by the Raspberry Pi RP2040 microcontroller.



Specifications:

• Controls up to 4 motors and sensors.
• Powers the Raspberry Pi (when used with a suitable external PSU).
• Easy to use from Python on the Raspberry Pi.


What's in the box?

1 x Raspberry Pi Build HAT for LEGO

Build HAT Links


LEGO Links

R469.90  Inc VAT
Raspberry Pi Pico with presoldered headers (RPi Pico H board)

Description:

This is an official Raspberry Pico that has had headers professionally pre-soldered on by a South African electronic manufacturing company.


Raspberry Pi Pico, a microcontroller board built on silicon designed by Raspberry Pi.

Whether you choose to use our C/C SDK, or the official MicroPython port, everything you need to get started is here. You’ll also find links to the technical documentation for both the Raspberry Pi Pico microcontroller board and our RP2040 microcontroller chip.



Board Specifications:
  • RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
  • Dual-core ARM Cortex M0 processor, flexible clock running up to 133 MHz
  • 264kB of SRAM, and 2MB of on-board Flash memory
  • Castellated module allows soldering direct to carrier boards
  • USB 1.1 Host and Device support
  • Low-power sleep and dormant modes
  • Drag & drop programming using mass storage over USB
  • 26 multi-function GPIO pins
  • 2×SPI, 2×I2C, 2×UART, 3×12-bit ADC, 16×controllable PWM channels
  • Accurate clock and timer on-chip
  • Temperature sensor
  • Accelerated floating point libraries on-chip
  • 8×Programmable IO (PIO) state machines for custom peripheral support


Download Pinout Diagram


Documentation

Documentation for the Raspberry Pi Pico board and the RP2040 microcontroller:

The API level Doxygen documentation for the Raspberry Pi Pico C/C SDK is available as a micro-site.

While Raspberry Pi Pico does not come with anything soldered to its pads, we will recommend that users fit 2.54mm pitch male pin strip headers.

Resources:

https://www.raspberrypi.org/blog/raspberry-pi-silicon-pico-now-on-sale/

https://www.raspberrypi.org/products/raspberry-pi-pico/

https://www.youtube.com/watch?v=ZY-HrRGCQ4w

Add wifi to Pico using Cricket
https://www.thingsonedge.com/post/pico-cricket-blynk-phone-alerts

YouTube video on Pico by Jeff Geerling

https://projects.raspberrypi.org/en/projects/getting-started-with-the-pico/1
R79.90  Inc VAT
R99.90
Official Raspberry Pi USB A male to Micro B 1M (Red 1m micro usb cable)
Description:

The USB to Micro USB Cable is 1m long manufactured by Raspberry Pi. This cable can be used in conjunction with a USB mains charger or Computer USB port to power your Raspberry Pi.

Specifications:
  • 1m Long
  • Colour: Red
  • Connector Type A: USB 
  • Connector Type B: Micro USB
Contents:
  • 1 x USB A male to USB micro B male 1m
R24.90  Inc VAT
Raspberrry Pi RP2040 microcontroller (RPi RP2040 microcontroller)
Description:

Raspberry Pi RP2040 is the first microcontroller designed in-house at Raspberry Pi (“Raspberry Silicon”).

It features:
• Dual-core Arm Cortex-M0 @ 133MHz
• 264KB of on-chip RAM
• Support for up to 16MB of off-chip Flash memory via a QSPI bus
• DMA controller
• Interpolator and integer divider peripherals
• 30 GPIO pins, 4 of which can be used as analogue inputs
• 2 × UARTs, 2 × SPI controllers, and 2 × I2C controllers
• 16 × PWM channels
• 1 × USB 1.1 controller and PHY, with host and device support
• 8 × Raspberry Pi Programmable I/O (PIO) state machines
• USB mass-storage boot mode with UF2 support, for drag-and-drop programming


Please see the RP2040 datasheet for more details

and Hardware Design with RP2040

To date, RP2040 has only been available on Raspberry Pi Pico, and as a component to a limited number of partners. We now cover the availability of RP2040 as a component to the broad market in single-unit quantities. Bulk quantities on reels of 500 and more available soon.

R18.27  Inc VAT
Raspberry Pi Power over Ethernet Plus (POE ) HAT (RPi POE HAT)
Description:

The Raspberry Pi PoE HAT is an add-on board for Raspberry Pi computers with PoE pins, including Raspberry Pi 3B and Raspberry Pi 4. It is used to power Raspberry Pi via an Ethernet cable, provided that power-sourcing equipment is installed on the Ethernet network. The HAT also includes a fan that will cool the Raspberry Pi processor.

Specifications:

Standard: IEEE 802.3at-2003 PoE
Input voltage: 37–57 V DC, Class 4 device
Output power: 5 V DC/4 A
Cooling: 25 mm × 25 mm brushless fan delivering 2.2 CFM for processor cooling

Features:
  • Fully isolated switched-mode power supply
  • Fan control

Operating temperature: 0 °C to 50 °C
Production lifetime: The Raspberry Pi PoE HAT will remain in production until at least January 2027
Compliance: For a full list of local and regional product approvals, please visit www.raspberrypi.org/compliance

Physical specifications


What's in the box?:

1 x Power over Ethernet Plus (POE ) HAT

WARNINGS

• This product shall only be connected to a Raspberry Pi via the four PoE pins.
• Any external power-sourcing equipment/power injector used to enable an Ethernet network shall comply with relevant regulations and standards applicable in the country of intended use.
• This product should be operated in a well ventilated environment, and if used inside a case, the case should not be covered.
• The connection of incompatible devices to the GPIO connection of a Raspberry Pi computer may affect compliance and result in damage to the unit and invalidate the warranty.
• All peripherals used with this product should comply with relevant standards for the country of
use and be marked accordingly to ensure that safety and performance requirements are met.
These articles include but are not limited to keyboards, monitors and mice when used in conjunction with Raspberry Pi computers.
• Where peripherals are connected that do not include the cable or connector, the cable or connector must offer adequate insulation and operation in order that the relevant performance and safety requirements are met.


SAFETY INSTRUCTIONS

To avoid malfunction or damage to this product, please observe the following:
• Do not expose to water or moisture, or place on a conductive surface whilst in operation.
• Do not expose to heat from any source. Raspberry Pi computers and the Raspberry Pi PoE HAT are designed for reliable operation at normal ambient room temperatures.
• Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board
and connectors.
• Avoid handling the printed circuit board whilst it is powered, and handle it only by the edges to minimise the risk of electrostatic discharge damage.
R409.90  Inc VAT
Tiny 2040 (PM Tiny2040)

Description:

A postage stamp sized RP2040 development board with a USB-C connection and 8MB of flash, perfect for portable projects, wearables, and embedding into devices.

While we love the Raspberry Pi Pico we also wanted something smaller and with a bunch more flash on board. Introducing the Tiny 2040 - a teeny tiny powerhouse with the chops to realise truly ambitious projects.

Powered and programmable via USB-C, Tiny 2040 comes with 8MB of QSPI (XiP) flash on board so it can handle projects small and large with ease. The board is designed with castellated pads to allow it to be directly soldered onto a PCB or alternatively you can use pin headers to hook it up on a breadboard or directly with wires. We've even managed to fit in a programmable RGB LED, a reset button and some clever circuitry that lets you use the boot button as a user controllable switch.

It's compatible with firmware built for the Raspberry Pi Pico but offers a reduced number of pins due to its size. You can even run MicroPython on it!

Features

  • Powered by RP2040
  • ARM Cortex M0 running at up to 133Mhz
  • 264kB of SRAM
  • USB-C connector for power, programming, and data transfer
  • 8MB of QSPI flash supporting XiP
  • User controllable RGB LED
  • Twelve IO pins (including four 12-bit ADC channels)
  • Switch for basic input (doubles up as DFU select on boot)
  • On-board 3V3 regulator
  • Dimensions: approx 22.9 x 18.2 x 6mm (L x W x H)


About RP2040

Raspberry Pi's RP2040 microcontroller is a dual core ARM Cortex M0 running at up to 133Mhz. It bundles in 264kB of SRAM, 30 multifunction GPIO pins (including a four channel 12-bit ADC), a heap of standard peripherals (I2C, SPI, UART, PWM, clocks, etc), and USB support.

One very exciting feature of RP2040 is the programmable IOs which allow you to execute custom programs that can manipulate GPIO pins and transfer data between peripherals - they can offload tasks that require high data transfer rates or precise timing that traditionally would have required a lot of heavy lifting from the CPU.

R189.90  Inc VAT
The Official Raspberry Pi Beginners Guide 4th Edition (RPi beginner guide 4th)
Description:

Fully updated for Raspberry Pi 400, Raspberry Pi 4, and the latest software, this 252-page official Raspberry Pi book is crammed with projects and beginner’s guides containing all the information you need to get started using your new computer!

Learn how to set up your Raspberry Pi, install an operating system, and start using it. Follow step-by-step guides to code your own animations and games, using both the Scratch 3 and Python languages. Create amazing projects by connecting electronic components to Raspberry Pi’s GPIO pins. Plus much, much more!


• Set up your Raspberry Pi, install its operating system, and start using this fully functional computer.
• Start coding projects, with step-by-step guides using the Scratch 3 and Python programming languages.
• Experiment with connecting electronic components and have fun creating amazing projects.


R159.90  Inc VAT
Raspberry Pi Pico (RPi Pico board)

https://www.raspberrypi.org/blog/raspberry-pi-silicon-pico-now-on-sale/

https://www.raspberrypi.org/products/raspberry-pi-pico/

https://www.youtube.com/watch?v=ZY-HrRGCQ4w

Add wifi to Pico using Cricket
https://www.thingsonedge.com/post/pico-cricket-blynk-phone-alerts

YouTube video on Pico by Jeff Geerling

Raspberry Pi Pico, a microcontroller board built on silicon designed here at Raspberry Pi.

Whether you choose to use our C/C++ SDK, or the official MicroPython port, everything you need to get started is here. You’ll also find links to the technical documentation for both the Raspberry Pi Pico microcontroller board and our RP2040 microcontroller chip.



Board Specifications

  • RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
  • Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz
  • 264kB of SRAM, and 2MB of on-board Flash memory
  • Castellated module allows soldering direct to carrier boards
  • USB 1.1 Host and Device support
  • Low-power sleep and dormant modes
  • Drag & drop programming using mass storage over USB
  • 26 multi-function GPIO pins
  • 2×SPI, 2×I2C, 2×UART, 3×12-bit ADC, 16×controllable PWM channels
  • Accurate clock and timer on-chip
  • Temperature sensor
  • Accelerated floating point libraries on-chip
  • 8×Programmable IO (PIO) state machines for custom peripheral support


Download Pinout Diagram


Documentation

Documentation for the Raspberry Pi Pico board and the RP2040 microcontroller:

The API level Doxygen documentation for the Raspberry Pi Pico C/C++ SDK is available as a micro-site.

While Raspberry Pi Pico does not come with anything soldered to its pads, we will recommend that users fit 2.54mm pitch male pin strip headers.


A low cost, high-performance microcontroller board built around Raspberry Pi's very own chip - the RP2040.
R69.90  Inc VAT
IOT Cricket - Wi-Fi module (IOT cricket)

Description:

Very easy to use, ultra-low power Wi-Fi module, which can run directly on batteries. Designed for developers at all skill levels from advanced to those just starting to build IOT devices.

Cricket is a perfect choice if you want to build IOT end nodes such as sensors, alarms, buttons, switches,  etc. to report data and events instantaneously from remote locations. What is really cool is the ultra-low power feature, which will make your devices to run on single batteries for a very long time (for years in many use cases).

With Cricket you can connect various peripherals to Wi-Fi out of the box; send data and events either within your local network or to the internet. Simply attach a battery and peripheral(s) to Cricket and your device is ready to go.

Cricket comes with a native support of MQTT and HTTP POST / GET protocols that allow you to integrate your devices to a huge ecosystem of software and internet services such as e.g. IFTTT, Zapier, Blynk, Home Assistant, Node-RED, automate.io, Google Docs, Emails, Mobile Apps, etc.

Cricket works with all standard Wi-Fi routers and it doesn't require IOT hubs. No coding/programming is required as it comes with pre-installed software. You configure Cricket entirely over the air either from a smartphone or a laptop (without fiddling and troubleshooting toolchains). It can be done either locally (toe_device WiFi hotspot) or remotely from COTA cloud service (http://cota.thingsonedge.com)

 

FEATURES:

* Ultra-low power, deep sleeep 0.5uA, true 0A (i.e. in a button device)

* Operates directly on batteries 1.0V-3.5V (AA, AAA, AAAA, ...)

* Sends data and events with ~3 seconds latency

* Configurable Real-Time Clock (RTC) for regular wake ups

* Configurable MQTT brokers

* Configurable secure / non-secure HTTP POST/GET requests

* Configurable a battery monitor

* Configurable Analog or Digital inputs (for sensors)

* Built-in configurable temperature sensor

* Local configuration (directly on a Cricket over captive portal / WiFi hotspot)

* Remote configuration from the Cloud (optional)

* OTA firmware updates

 

Few examples of what you can build with Cricket:

 

Endless possibilities to build broad range of devices which report data in various forms to the internet / services / smartphones

Please check some of our projects (HERE) to get started with Cricket.

R329.90  Inc VAT
Raspberry Pi Pico Maker kit 1 (Pico maker kit 1)
Description:

This Starter Kit is based around the Raspberry Pi Pico development board which features the Raspberry Pi RP2040 microcontroller chip.

Whats in the box:

Resources:

Add wifi to Pico using Cricket
https://www.thingsonedge.com/post/pico-cricket-blynk-phone-alerts

R117.69  Inc VAT
Raspberry Pi 48W (8V DC, 6A) power supply for Build HAT (RPi build power supply 8V)
Description:

Official 48W (8V DC, 6A) power supply, designed for use with the Raspberry Pi Build HAT. Shipped with easily interchangeable heads for the UK, US, EU and Australia you can now use your Pi in all four corners of the world! 

Power your Raspberry Pi Build HAT projects with the Raspberry Pi Build HAT Power Supply. This 48W power supply will power the Build HAT and connected LEGO® Technic™ motors, as well as your Raspberry Pi computer.
Compatible with LEGO Technic motors and sensors included in the LEGO® Education SPIKE™ Portfolio, the Build HAT combines the power of Raspberry Pi computing with easy building opportunities to help you make creative and robust projects.

Specifications:

Output
  • Output voltage: +8.0V DC
  • Minimum load current: 0.01A
  • Nominal load current: 6.0A
  • Maximum power: 48.0W
  • Load regulation: ±5%
  • Line regulation: ±5%
  • Ripple & noise: 200mVp-p
  • Rise time: 100ms maximum to regulation limits for DC outputs
  • Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
  • Protection: Short circuit protection
  • Overcurrent protection
  • Overvoltage protection
  • Efficiency: 87.77% minimum (output current from 100%, 75%, 50%, 25%)
  • Output cable: 1.5m 16AWG
  • Output connector: Barrel connector 5.5mm × 2.1mm × 11mm Centre positive

Input
  • Voltage range: 100-240Vac (rated)
  • 96-264Vac (operating)
  • Frequency: 50/60Hz ±3Hz
  • Current: 1.2A maximum
  • Power consumption (no load): 0.1W maximum
  • Inrush current: No damage shall occur and the input fuse shall not blow

What's in the box?

1 x Official 48W power supply for Build HAT
R269.90  Inc VAT
Per Page      41 - 60 of 1247