All Products
DaVinci Lab’s ABS (Acrylonitrile butadiene styrene) is a super strong, hard wearing and low warping superior filament.
Specifications:
- Davinci Lab ABS
- Print temp :- 220 - 250 degrees
- Heated Bed ;- 80 - 90 degrees (optional)
- Speed range 60 - 85 mm/s
- Fan :- No
- Weight :-1kg
- Printability :- intermediate
Enclosure is recommended
Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
Atmel's ATMega328P 8-Bit Processor in 28 pin DIP package. It comes with 32K of program space. 23 I/O lines, 6 of which are channels for the 10-bit ADC. Runs up to 20MHz with external crystal. Package can be programmed in circuit. 1.8V to 5V operating voltage! The famous Arduino Deumilanove, and Arduino UNO is using this ATMega microcontroller. Anyhow, this microcontroller is fresh new without any bootloader.
This microcontroller is pre-loaded with Optiboot bootloader (Uno 16MHz). This means you can use Arduino code in your own project without using an actual Arduino Board. No programmer is needed anymore but you still need UC00A and basic circuit. Please select Arduino Uno Board in the Arduino IDE. We are using this microcontroller in our Breadboard Friendly Arduino (BBFuino). Therefore, you can refer to BBFuino's schematic and tutorial for more information.
What's in the box?
1 x IC ATMEGA328P
Description
Official Raspberry Pi Micro HDMI to HDMI cable, fully licensed by Raspberry Pi and manufactured for the Raspberry Pi 4 Model B and RPi400.
Perfect for running a dual screen setup.
Specifications- 19-pin HDMI Type D(M) to 19-pin HDMI Type A(M)
- 2m black cable
- Nickel-plated plugs
- 4Kp60 compliant
- RoHS compliant
- 3Mohm 300VDC insulation, withstands 300VDC for 0.1s
What's in the box?
1 x 2m black micro HDMI cable
2x20 pin double row header male to male
These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's).
Ideal for:
- Pi Zero
- Electronic projects
- Printed circuit boards
- Gender: Male
- No. of Contacts: 20
- No. of Pins: 20
- Termination: Straight Pins Solder Tail
- Size: 2.54mm
- Row Positions: Double Row
1 x Double Row Pin Header 40 PIN
Description:
The Raspberry Pi Zero comes equipped with a special mini camera port which is smaller than the standard connector for the Raspberry Pi Camera and Noir Camera! So how do you connect to it? With this special camera cable designed specifically for the Raspberry Pi Zero of course! This is an extra long version, with a 150mm total length!
Specifications:
- Length: 150 mm
- Product Dimensions: 150.0mm x 16.0mm x 0.2mm
- Made to fit: Raspberry Pi Zero
- Pins: 15
What's in the box:
1 x Raspberry Pi Zero Camera Cable
Description:
The Official Raspberry Pi Zero & Zero Wireless Case is now available! Specially made and beautifully crafted in red & white, this nifty and tactile snap-together case is designed to protect your Zero!
The case comes with three swappable lids, each with a different function:
- Raspberry Pi Camera lens holder lid with included extra short 35mm Raspberry Pi Zero camera cable(This cover is for the normal Raspberry Pi camera. The zero camera lens is to small to fit snugly.)
- GPIO access lid, with GPIO hole for all your hacking needs
- Solid lid, for those who want an all around protected Zero!
The Official Raspberry Pi Zero Red & White Case Features:
- Fabulous Raspberry Red and White Colour Combination
- 2 Part "Snap-Fit" Enclousure, with 3 separate lids (GPIO/Camera/Solid)
- Underside slot for GPIO access
- Cut-outs for all connection points
- No SD card access (keeps your card protected!)
- Included 4 x Stick on rubber feet for case stability
Some mini-HDMI cables will need to have their shroud's cut down to fit the official case.
What's in the box:
1 x Raspberry Pi Zero Red & White Case
A transistor is a semiconductor device used to amplify or switch electrical signals and power.
Assorted transistors
Pic is for illustration purposes only
Please check options for availability
Resources:
Introduction to Transistors
Different Types of Transistors and Their Working
Cat5e is currently the most commonly used in new installations. It's designed to greatly reduce crosstalk.
It basically means the Cat 5e is better at keeping signals on different circuits or channels from interfering with each other.
Specifications:
A step above Cat 5, it can handle 1000 Mbps speeds (gigabit Ethernet) at 100 MHz.
What's in the box?
Sold per meter.
Please indicate via the quantity box how many meters you would like to have.
These 1.8m Gold Plated HDMI to DVI-D cables are the perfect low cost solution to connecting your Raspberry Pi to your DVI monitor or TV. Broadcast quality digital video and inter-component control signals all in one compact, high-performance connection
The 1.8m HDMI to DVI-D Cable Features:
- Tested for Compatibility with the Raspberry Pi
- HDMI Male (19 Pin) to DVI-D Male (24 1 Pin)
- 1.8m Long
- 24k Gold-Plated Contacts Prevents Corrosion for Life-Long Optimum Signal-Transfer
- 30AWG Wire
- 3 Year Warranty
- Dual Link, High-Speed - 1080p Full HD
- Black PVC Jacket OD 6mm
- Triple Shielding for Maximum RFI Protection and Ultimate Picture Stability
- Supports Uncompressed Video Signals
- Perfect for both High-Definition Video and Standard Video Formats.
- Fully HDCP Compliant to Provide Highest Level of Signal Quality
- RoHS Compliant
These are carbon film axial leaded through hole type and can handle up to 1/4W of power. 1/4W resistors are the most commonly used size for breadboarding, electronics and most common types of hobby projects.
Specifications:
- Power: up to 1/4W
- Material: carbon film
- Lead diameter: 0.55 mm
- Tolerance : 5%
- Operating Temp : -55C – 155C
- 10 x 330 Ohm Resistors
Got a TV with no HDMI input, but still want to hack your Raspberry Pi? Don't worry! The Raspberry Pi comes equipped with a neat 4-Way Composite Video/Audio Jack, and we've got just the cable for you!
Plug this cable into your Raspberry Pi's composite 3.5mm Jack, and your Pi will output Video (1-line) and Audio (2-lines) via the three RCA connectors.
Specification:Connector Layout
- Red - Video
- Yellow - Right Audio
- Black - Left Audio
- Tested for Compatibility with the Raspberry Pi
- Gold Plated Connectors
- 3m Long
- Colour: Black
- Connector Type A: 4-Way 3.5mm Audio Jack
- Connector Type B: 3 x RCA Connectors
- 1 x Composite Cable - 3.5mm to 3 x RCA
Helpful Tips
- On first startup (when installing an OS via the NOOBs distribution), hold 3 at boot for PAL, or 4 at boot for NTSC. This will force output via composite insted of HDMI .
- If you have installed an operating system with an HDMI cable, and want to change to composite hold SHIFT 3 at boot for PAL, or SHIFT 4 at boot for NTSC
Notes on RPi4
By default the composite output on the Pi 4 is disabled because it slows the system down. You need to add this to config.txt
enable_tvout=1
What's in the box:
1 x A/V Composite Cable
These premium jumper cables are a little over 200mm long. These premium jumper cables are a little over 200mm long. Perfect for connecting sensors to breadboards or microcontrollers.
Ribbon of 40 male to female
Specifications:- 40 x 200mm
- Male to Female
- Tested for Compatibility with the Raspberry Pi
- Breadboard compatible
- Colour: Multi-coloured
- 40 x 200mm Male to Female Jumper cables
These electrical connectors are designed for ribbon cables and telecommunications applications. They are also referred to as insulation-piercing contacts (IPCs).
Specifications:
- 40 Pins Male Standard 0.1" 2.54mm Row spacing
- Low Profile with mounting ears
- 0.1" Pin spacing 0.1" Row spacing, Mates with IDC & PCB male Receptacles
- Insulation Displacement Connector terminates to 0.050" (1.27mm) flat ribbon cable
1 x 40-PIN IDC SOCKET CABLE MOUNT
Resistors 1/4Watt 1K Ohm
Pack of 10
Resources:
Resistors basics
Types of Resistors
Resistor colour codes
The L7812CV is a three-terminal positive voltage regulator. It can provide local on-card regulation, eliminating the distribution problems associated with single-point regulation. The L7812CV embeds internal current limiting, thermal shut-down, and safe area protection, making it essentially indestructible.
Specifications:
Primary input voltage: 19V
Input Voltage Min: 14V
Maximum input voltage: 35V
Fixed output voltage: 12V
Pressure drop: 2V
Output channel number: 1
Number of pins: 3
Output current: 1.5A
Package Type: TO-220 Tube
Operating temperature range: 0℃ to 150℃
SVHC (Highly Concerned Substances): No SVHC (20-Jun-2011)
Device number: 7812
Tolerance, operating voltage : 4%
Voltage Rectifier Type: Positive Fixed
Maximum supply voltage: 27V
Power supply voltage minimum: 14.5V
Surface Mount Devices: Through Hole Installation
Package included:
1 x TO-220 Voltage Regulator IC
Resources:
Understanding How a Voltage Regulator Works
These are carbon film axial leaded through hole type and can handle up to 1/4W of power. 1/4W resistors are the most commonly used size for breadboarding, electronics and most common types of hobby projects.
Specifications:
- Power: up to 1/4W
- Material: carbon film
- Lead diameter: 0.55 mm
- Tolerance : 5%
- Operating Temp : -55C – 155C
10 x 10k ohm resistors
Resources:
Resistors basics
Types of Resistors
Resistor colour codes
Diffused LEDs shine through a semi-transparent cover, absorbing the light and bouncing it through in different directions. Instead of seeing the individual LED light up, the whole bulb shines instead, giving a more uniform light spread over a greater area.
Specification:
| Color | Size | Wavelength(nm) | Voltage(V) | MCD | Lens color |
| Red | 5mm | 620-630 | 1.8-2.3 | 800-1000 | Red diffused |
| Yellow | 5mm | 580-590 | 1.8-2.3 | 800-1000 | Yellow diffused |
| Green | 5mm | 520-530 | 2.8-3.6 | 800-1000 | Green diffused |
| White | 5mm | 6000-6500k | 2.8-3.6 | 14000-16000 | Clear |
| Blue | 5mm | 460-470 | 2.8-3.6 | 800-1000 | Blue diffused |
What's in the box?:
10 x coloured LEDs
Red x 2 units
Yellow x 2 units
Green x 2 units
White x 2 units
Blue x 2 units
Resources:
Python library
Introduction
Diffused LEDs shine through a semi-transparent cover, absorbing the light and bouncing it through in different directions. Instead of seeing the individual LED light up, the whole bulb shines instead, giving a more uniform light spread over a greater area.
Specifications:| Color | Size | Wavelength(nm) | Voltage(V) | MCD | Lens color |
| Red | 5mm | 620-630 | 1.8-2.3 | 800-1000 | Red diffused |
| Yellow | 5mm | 580-590 | 1.8-2.3 | 800-1000 | Yellow diffused |
| Green | 5mm | 520-530 | 2.8-3.6 | 800-1000 | Green diffused |
| White | 5mm | 6000-6500k | 2.8-3.6 | 14000-16000 | Clear |
| Blue | 5mm | 460-470 | 2.8-3.6 | 800-1000 | Blue diffused |
Contents:
- 10 x Yellow LED 5mm
The USB to Micro USB Cable is 1.5m long and has been tested for compatibility with the Raspberry Pi. This cable can be used in conjunction with a USB mains charger or Computer USB port to power your Raspberry Pi.
Specifications:- Tested for Compatibility with the Raspberry Pi
- 26AWG (Up to 2A)
- 1.5m Long
- Colour: Black
- Connector Type A: USB
- Connector Type B: Micro USB
- 1 x USB A male to USB micro B male 1.5m
If you're into arcade gaming, there's no doubt that you've heard of Sanwa. Used widely in top end arcade arcade machines and manufactured in Japan by Sanwa Denshi Co., Sanwa arcade products are up there at the top of quality chain in arcade gaming. You really can feel the difference in the quality and snappiness of the microswitches!
The Sanwa OBSF-30 range are 30mm "snap-in" style arcade buttons with built in microswitch and 2.8mm terminals. These buttons feature two plastic clips which are designed to lock into panels with a thickness of up to 4mm. They will also clamp perfectly well into greater thickness materials.
Features
- Green Colour
- 30mm Diameter Arcade Button
- Sanwa High-Quality Microswitch
- Smooth Clicking Action
- 2.8mm Terminal Contacts
- Gold Plated Contacts
- Official Sanwa Product
- Manufacturer Part No. OBSF-30