All Products
PETG is short for polyethylene terephthalate glycol-modified
PETG is the perfect filament to combine strength and ductility, which is why it's used in so many mechanical parts and robotics. It has great chemical resistance with good water, acidic and alkalic resistance. PETG in its raw form is also FDA and EU commission regulation approved as Food Contact Safe.
Print temp : 235 – 255°C
Heated Bed : 65 – 85°C
Speed range : 30 - 60mm/s optimal
Printability : Moderate
Net Weight: 1kg
What's in the box ?
1 x SA Filament PETG Blue (1.75mm)
PETG is short for polyethylene terephthalate glycol-modified
PETG is the perfect filament to combine strength and ductility, which is why it's used in so many mechanical parts and robotics. It has great chemical resistance with good water, acidic and alkalic resistance. PETG in its raw form is also FDA and EU commission regulation approved as Food Contact Safe.
Print temp : 235 – 255°C
Heated Bed : 65 – 85°C
Speed range : 30 - 60mm/s optimal
Printability : Moderate
Net Weight: 1kg
What's in the box ?
1 x SA Filament PETG Orange (1.75mm)
PETG is short for polyethylene terephthalate glycol-modified
PETG is the perfect filament to combine strength and ductility, which is why it's used in so many mechanical parts and robotics. It has great chemical resistance with good water, acidic and alkalic resistance. PETG in its raw form is also FDA and EU commission regulation approved as Food Contact Safe.
Print temp : 235 – 255°C
Heated Bed : 65 – 85°C
Speed range : 30 - 60mm/s optimal
Printability : Moderate
Net Weight: 1kg
What's in the box ?
1 x SA Filament PETG Yellow (1.75mm)
PETG is short for polyethylene terephthalate glycol-modified
PETG is the perfect filament to combine strength and ductility, which is why it's used in so many mechanical parts and robotics. It has great chemical resistance with good water, acidic and alkalic resistance. PETG in its raw form is also FDA and EU commission regulation approved as Food Contact Safe.
Print temp : 235 – 255°C
Heated Bed : 65 – 85°C
Speed range : 30 - 60mm/s optimal
Printability : Moderate
Net Weight: 1kg
What's in the box ?
1 x SA Filament PETG Green (1.75mm)
PETG is short for polyethylene terephthalate glycol-modified
PETG is the perfect filament to combine strength and ductility, which is why it's used in so many mechanical parts and robotics. It has great chemical resistance with good water, acidic and alkalic resistance. PETG in its raw form is also FDA and EU commission regulation approved as Food Contact Safe.
Print temp : 235 – 255°C
Heated Bed : 65 – 85°C
Speed range : 30 - 60mm/s optimal
Printability : Moderate
Net Weight: 1kg
What's in the box ?
1 x SA Filament PETG Red (1.75mm)
PETG is short for polyethylene terephthalate glycol-modified
PETG is the perfect filament to combine strength and ductility, which is why it's used in so many mechanical parts and robotics. It has great chemical resistance with good water, acidic and alkalic resistance. PETG in its raw form is also FDA and EU commission regulation approved as Food Contact Safe.
Print temp : 235 – 255°C
Heated Bed : 65 – 85°C
Speed range : 30 - 60mm/s optimal
Printability : Moderate
Net Weight: 1kg
What's in the box ?
1 x SA Filament PETG Silver (1.75mm)
This Buck DC-DC Converter outweighs any linear regulator for being able to provide 5V output at 2.5A continuous current.
Features:
- Output voltage: 5VDC
- Input voltage: 6.5 to 27VDC
- Maximum output current:
- Continuous current: 2.5A
- Peak current: 3.5A
- Quiescent current: 250uA (inactivity/no load)
- Switching frequency: 900kHz
- Efficiency: 75 to 92%
- Input undervoltage protection
- Overheat protection
- Short circuit protection
- –20°C to +85°C
- Dimensions: 25mm x 15mm x 6.3mm
What's in the box?
1 x 5V 2.5A Buck Converter (6.5-27VDC Input)The Ender 3 S1 Pro is a new and improved version of the very successful Ender 3. Equipped with a newly developed direct dual-gear extruder, automatic bed leveling, 32-bit silent mainboard, among other things, the S1-Pro is a very affordable printer with everything you could wish for at this price point.
Sprite Full-Metal Direct Drive Extruder with dual gear
Ender 3 s1 and Ender 3 S1 Pro use direct-drive extruders. The distance is shorter in a direct drive and the retraction too. Ender-3 S1 Pro upgrade to full-metal dual-gear direct extruder with an extrusion force of 80N ensures smooth feeding when printing with different filaments. especially the flexible TPU.
Up to 300℃ high-temp printing support multiple filaments.
It's compatible with multiple filaments, such as PLA, ABS, PVA, Wood, TPU, PETG, and PA, providing more possibilities for creation.
Spring Steel PEI Magnetic Build Plate
It can handle high temperatures a lot better than the one used in Ender 3 S1. You can easly remove it if you want since it gets attached to magnetics well. It is compatible with ASA, TPU, PLA, Wood, PETG, PAHT, SILK as well as other types of filaments. It removes all the small issues you have while printing. It trully takes no effort to take out the print -when printing is over, you simply bend the base and the model detaches itself from it.
- Ender 3 S1 & Ender 3 S1 Pro in comparison -
Ender 3 S1 | Ender 3 S1 Pro | |
Build volume | 220x220x270mm | 220x220x270mm |
Printer size | 487x453x622mm | 490x455x625mm |
Extruder | Sprite Direct Drive Dual Gear | Sprite Direct Drive Dual Gear |
Max. nozzle temperature | 260ºC | 300ºC |
Max. heatbed temperature | 100ºC | 110ºC |
Weight | 9.1kg | 8.6kg |
Interfaces | USB-C / SD | USB-C / SD |
Filament sensor | Yes | Yes |
Dual Z-axis | Yes | Yes |
Automatic levelling | Yes | Yes |
Motherboard | Silent motherboard, 32-bit | Silent motherboard, 32-bit |
Screen | 4.3 inch screen with button | 4.3 inch touch screen |
UI language | Chinese, English | Chinese, English, German, Spanish, French, Italian, Portuguese, Russian, Turkish |
What's in the box?
1 x Creality Ender-3 S1 Pro
- Tool Kit for 3D Printing Beginners
- ABS Box, Heat and Impact Resistance
- 18 PCS Set: Wrench, scissors, casing and others
- Strong Practicality, Durable

This kit includes:
- Spatula
- Wrench
- 0.38mm needle
- Feeler gauge
- 1.0mm needle
- Needle nose pliers
- Side cutters large
- PTFE cutters
- SD card reader
- Cross socket wrench
- Box cutter
- Side cutters small
- Flathead screwdriver
- Phillips screwdriver
- M6 socket wrench
- M8 socket wrench
- Tweezers
- Allen key kit
What's in the box?
1 x 3D printer toolbox
What's in the box?
4 x wheel nuts
4 x springs
4 x clips
Specifications
Equipped with 32-bit MCU,Increase Stability by 48.5%
High Noise Reduction
Dedicated Power Management Chip,Low Consumption
All-round Heat Dissipation Design
Full Functioning,Easy Installation
Note:
Do not touch the motherboard with wet hands, keep it dry.
What's in the box?
1 x Creality Ender-3 V2 Mainboard V4.2.7
Specifications:
Item: Extruder Back Support Base Plate with wheels
Material: Metal
Colour: Black
What's in the box?
1 x Creality Extruder Back Support Plate With Wheels
(1) Electrical characteristics
A: Resistance value: R(25°C)=100K±1%
B: B Value: B=3950±1% (calculated from resistance value at 25°C and 50C)
C: Insulation resistance 50MΩ or over by DC500V megger (between glass and lead wire)
(2) Thermal time constant (τ): τ≤10~17s (in still air)
(3) Thermal dissipation constant (δ): δ=1.1~1.6mW/°C (in still air)
(4) Operating temperature range:-50~+260°C
Package Includes:
1 x NTC Thermistor with cable
Features:
Specifications:
Size: 310 x 320 x 4mm
Material: Carborundum glass
Application: CR-10 V3/CR10S/Pro V2
What's in the box?
1x Creality Glass Platform
Features:
Specifications:
Size: 310 x 240mm
Material: Carborundum glass
Application: CR-5 Pro
What's in the box?
1x Creality Glass Platform
What's in the box?
4 x wheel nuts
4 x springs
Features:
Specifications:
Size: 235 x 235 x 4mm
Material: Tempered glass
Application: For ender-3/pro/5 3D printer
What's in the box?
1 x Creality Glass Platform
This third generation model maintains the same popular board format as the Raspberry Pi 2 and Raspberry Pi B , but boasts a faster 1.2GHz 64Bit SoC, and on board WiFi and Bluetooth!
Specifications
- Processor
- Broadcom BCM2387 chipset.
- 1.2GHz Quad-Core ARM Cortex-A53 (64Bit)
- 802.11 b/g/n Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE)
- GPU
- Dual Core VideoCore IV® Multimedia Co-Processor. Provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode.
- Capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs with texture filtering and DMA infrastructure
- Memory
- 1GB LPDDR2
- Operating System
- Boots from Micro SD card, running a version of the Linux operating system or Windows 10 IoT
- Dimensions
- 85 x 56 x 17mm
- Power
- Micro USB socket 5V, 2.5A if you want to add some power hungry USB devices
Connectors
- Ethernet
- 10/100 BaseT Ethernet socket
- Video Output
- HDMI (rev 1.3 & 1.4)
- Composite RCA (PAL and NTSC)
- Audio Output
- Audio Output 3.5mm jack
- HDMI
- USB 4 x USB 2.0 Connector
- GPIO Connector
- 40-pin 2.54 mm (100 mil) expansion header: 2x20 strip
- Providing 27 GPIO pins as well as 3.3 V, 5 V and GND supply lines
- Camera Connector
- 15-pin MIPI Camera Serial Interface (CSI-2)
- Display Connector
- Display Serial Interface (DSI) 15 way flat flex cable connector with two data lanes and a clock lane
- Memory Card Slot
- Push/pull Micro SDIO
Raspberry Pi Operating System Downloads: https://www.raspberrypi.org/downloads/
Getting Started with Raspberry Pi
Description:
The Raspberry Pi Zero WH has landed at PiShop! The Raspberry Pi Zero is an ultra low cost and ultra small variant of the original Raspberry Pi. It's tiny, measuring just 65mm x 30mm, and is perfectly designed for embedded applications, wearables, prototyping and any other Pi based tinkering you can think of, on a micro scale! The Raspberry Pi Zero Wireless features on board Wireless Internet & Bluetooth for all your connectivity needs!
The Raspberry Pi Zero features a BCM2835 chipset, overclocked to 1Ghz with 512MB RAM, and the same 1080p video output, so there's plenty of oomph in that little board. It also features the same 40 pin GPIO layout as the Raspberry Pi 2/B /A , with a pre-soldered male header. With it's small form factor and reduction in connectors, the Raspberry Pi Zero only uses ~ 140mA at 5V!
Unlike it's larger brothers and sisters, the Raspberry Pi Zero has an unpopulated composite (RCA) header and an unpopulated reset header. There's also no DSI screen port, no ethernet, no analogue audio and no full sized USB ports. Instead, the Pi Zero features a micro-USB power port, a micro USB OTG host port (for peripherals e.g. WiFi dongle), and a mini HDMI port for video.
HAT Compatibility Note: The Pi Zero is fully compatible with all HAT breakout boards, as it features the same 40 Pin GPIO as the Raspberry Pi 2/B /A
Raspberry Pi Zero Wireless Features:
- BCM2835 chipset, Overclocked to 1Ghz
- 512MB RAM
- Tiny Form Factor: 65mm x 30mm x 5mm
- Fully HAT compatible
- 40pin GPIO with pre-soldered header
- Stream and watch Hi-definition video output at 1080P
- Micro SD Slot for OS
- Tiny Current Draw ~ 140mA at 5V!
- Mini-HDMI for Video
- Micro-USB OTG Host for Data
- Micro-USB for Power
- Micro-CSI Camera Port
- On-Board WiFi
- On-Board Bluetooth
What's in the box?:
1 x Raspberry Pi Zero WH
Resources:
Raspberry Pi Operating System Downloads: https://www.raspberrypi.org/downloads/
Getting Started with Raspberry Pi
Get started with the Raspberry Pi with one of our pre-boxed kits
These kits are perfect for beginners that are just just getting exposed to the Raspberry Pi, Media enthusiasts looking to stream online content with Kodi, developers looking to exploit the many advantages of the RPI's GPIO pins and anybody looking to get some cool goodies at a great price! They contain all of the essential items that you need to get up and running in no time.
What's in the box?
1 x Raspberry Pi 3 Model B
1 x Official 5V 2.5A Power Supply in White
1 x Official white 1m HDMI cable
1 x 32GB Micro SD card with the latest version of Raspberry Pi OS pre-installed
1 x Official Red/White case for Pi3
Want to take your kit to the next level?
Want a cheap eco-friendly PC
Grab a Keyboard and Mouse, select Raspbian when setting up your RPI and you'll be browsing the web, sending emails, editing spreadsheets and watching videos just like you're used to with a desktop/laptop.
We know you love retro gaming!
Check out our Arcade section, whether you just want a retro control or a mini DIY arcade cabinet we have what you're looking for.
Did somebody say Robotics?
We've got some cool beginner's items in our robotic section
Our Kits come with the latest version of Raspberry Pi OS pre-installed, While we will certainly try our best to assist with any software related questions we cannot offer any kind of official support on community driven, open source, or non-PiShop produced proprietary software.
NOOBS, Raspbian, LibreELEC and OSMC are all open-source software, please visit the developer's respective websites for more info.
Morel info on Raspberry Pi OS can be found here.